URL
https://opencores.org/ocsvn/System09/System09/trunk
Subversion Repositories System09
[/] [System09/] [branches/] [mkfiles_rev1/] [rtl/] [Testbench/] [testbench4.vhd] - Rev 150
Go to most recent revision | Compare with Previous | Blame | View Log
--===========================================================================-- -- -- MC6809 Microprocessor Test Bench 4 -- Test Software - SBUG ROM -- -- -- John Kent 12st April 2003 -- -- Version 1.1 - 25th Jan 2004 - John Kent -- removed "test_alu" and "test_cc" -- -- ------------------------------------------------------------------------------- library ieee; use ieee.std_logic_1164.all; use IEEE.STD_LOGIC_ARITH.ALL; use ieee.numeric_std.all; entity my_testbench is end my_testbench; ------------------------------------------------------------------------------- -- Architecture for memio Controller Unit ------------------------------------------------------------------------------- architecture behavior of my_testbench is ----------------------------------------------------------------------------- -- Signals ----------------------------------------------------------------------------- signal cpu_irq : std_Logic; signal cpu_firq : std_logic; signal cpu_nmi : std_logic; -- CPU Interface signals signal SysClk : Std_Logic; signal cpu_reset : Std_Logic; signal cpu_rw : Std_Logic; signal cpu_vma : Std_Logic; signal cpu_addr : Std_Logic_Vector(15 downto 0); signal cpu_data_in : Std_Logic_Vector(7 downto 0); signal cpu_data_out: Std_Logic_Vector(7 downto 0); signal cpu_halt : Std_logic; signal cpu_hold : Std_logic; signal rom_data_out: Std_Logic_Vector(7 downto 0); signal ram_data_out: Std_Logic_Vector(7 downto 0); signal ram_cs : Std_Logic; component cpu09 port ( clk: in std_logic; rst: in std_logic; rw: out std_logic; -- Asynchronous memory interface vma: out std_logic; address: out std_logic_vector(15 downto 0); data_in: in std_logic_vector(7 downto 0); data_out: out std_logic_vector(7 downto 0); halt: in std_logic; hold: in std_logic; irq: in std_logic; nmi: in std_logic; firq: in std_logic ); end component; component sbug_rom Port ( MEMclk : in std_logic; MEMaddr : in std_logic_vector (10 downto 0); MEMrdata : out std_logic_vector (7 downto 0) ); end component; component block_ram Port ( MEMclk : in std_logic; MEMcs : in std_logic; MEMrw : in std_logic; MEMaddr : in std_logic_vector (10 downto 0); MEMrdata : out std_logic_vector (7 downto 0); MEMwdata : in std_logic_vector (7 downto 0) ); end component; begin my_cpu : cpu09 port map ( clk => SysClk, rst => cpu_reset, rw => cpu_rw, vma => cpu_vma, address => cpu_addr(15 downto 0), data_in => cpu_data_in, data_out => cpu_data_out, halt => cpu_halt, hold => cpu_hold, irq => cpu_irq, nmi => cpu_nmi, firq => cpu_firq ); my_ram : block_ram port map ( MEMclk => SysClk, MEMcs => ram_cs, MEMrw => cpu_rw, MEMaddr => cpu_addr(10 downto 0), MEMrdata => ram_data_out, MEMwdata => cpu_data_out ); my_rom : sbug_rom port map ( MEMclk => SysClk, MEMaddr => cpu_addr(10 downto 0), MEMrdata => rom_data_out ); -- *** Test Bench - User Defined Section *** tb : PROCESS variable count : integer; BEGIN cpu_reset <= '0'; SysClk <= '0'; cpu_irq <= '0'; cpu_nmi <= '0'; cpu_firq <= '0'; cpu_halt <= '0'; cpu_hold <= '0'; for count in 0 to 512 loop SysClk <= '0'; if count = 0 then cpu_reset <= '1'; elsif count = 1 then cpu_reset <= '0'; end if; wait for 100 ns; SysClk <= '1'; wait for 100 ns; end loop; wait; -- will wait forever END PROCESS; -- *** End Test Bench - User Defined Section *** rom : PROCESS( cpu_addr, rom_data_out, ram_data_out ) begin if( cpu_addr(15 downto 11) = "11111" ) then cpu_data_in <= rom_data_out; ram_cs <= '0'; else cpu_data_in <= ram_data_out; ram_cs <= '1'; end if; end process; end behavior; --===================== End of architecture =======================--
Go to most recent revision | Compare with Previous | Blame | View Log