URL
https://opencores.org/ocsvn/System09/System09/trunk
Subversion Repositories System09
[/] [System09/] [rev_86/] [rtl/] [System09_BurchED_B3/] [System09_BurchED_B3.ucf] - Rev 184
Go to most recent revision | Compare with Previous | Blame | View Log
#### UCF file created by Project Navigator
#
# PIN DEFINITION FOR BURCHED SPARTAN2 B3
# XC2S200.
#
# B3 Connector J3
# B5-X300 Connector C
#
#NET "b5_clk" LOC = "p185"; #pin 2 (Global clock input)
NET "bus_addr<0>" LOC = "p181"; #pin 3
NET "bus_addr<1>" LOC = "p187"; #pin 4
NET "bus_addr<2>" LOC = "p188"; #pin 5
NET "bus_addr<3>" LOC = "p189"; #pin 6
NET "bus_addr<4>" LOC = "p191"; #pin 7
NET "bus_addr<5>" LOC = "p192"; #pin 8
NET "bus_addr<6>" LOC = "p193"; #pin 9
NET "bus_addr<7>" LOC = "p194"; #pin 10
NET "bus_addr<8>" LOC = "p195"; #pin 11
NET "bus_addr<9>" LOC = "p199"; #pin 12
NET "bus_addr<10>" LOC = "p200"; #pin 13
NET "bus_addr<11>" LOC = "p201"; #pin 14
NET "bus_addr<12>" LOC = "p202"; #pin 15
NET "bus_addr<13>" LOC = "p203"; #pin 16
NET "bus_addr<14>" LOC = "p204"; #pin 17
NET "bus_addr<15>" LOC = "p205"; #pin 18
NET "bus_csn" LOC = "p206"; #pin 19
#
# B3 Connector J4
# B5-X300 Connector D
#
#NET "GCK2" LOC = "p182"; #pin 2 (Global clock input)
NET "bus_clk" LOC = "p160"; #pin 3
NET "bus_reset" LOC = "p161"; #pin 4
#NET "bus_hold" LOC = "p162"; #pin 5
#NET "bus_irq" LOC = "p163"; #pin 6
NET "bus_addr<16>" LOC = "p164"; #pin 7
NET "bus_addr<17>" LOC = "p165"; #pin 8
NET "bus_addr<18>" LOC = "p166"; #pin 9
NET "bus_addr<19>" LOC = "p167"; #pin 10
NET "bus_data<0>" LOC = "p168"; #pin 11
NET "bus_data<1>" LOC = "p172"; #pin 12
NET "bus_data<2>" LOC = "p173"; #pin 13
NET "bus_data<3>" LOC = "p174"; #pin 14
NET "bus_data<4>" LOC = "p175"; #pin 15
NET "bus_data<5>" LOC = "p176"; #pin 16
NET "bus_data<6>" LOC = "p178"; #pin 17
NET "bus_data<7>" LOC = "p179"; #pin 18
NET "bus_rw" LOC = "p180"; #pin 19
#
# Connector J3
#
# For B5-Compact-Flash:
#
#NET "GCK3" LOC = "P185"; #J2-2 (Global Clock input)
#NET "IO" LOC = "P181"; #J2-3
#NET "IO" LOC = "P187"; #J2-4
#NET "IO" LOC = "P188"; #J2-5
#NET "cf_a<2>" LOC = "P189"; #J2-6
#NET "cf_a<1>" LOC = "P191"; #J2-7
#NET "cf_a<0>" LOC = "P192"; #J2-8
#NET "cf_d<0>" LOC = "P193"; #J2-9
#NET "cf_d<1>" LOC = "P194"; #J2-10
#NET "cf_d<2>" LOC = "P195"; #J2-11
#NET "cf_cs16_n" LOC = "P199"; #J2-12
#NET "cf_d<10>" LOC = "P200"; #J2-13
#NET "cf_d<9>" LOC = "P201"; #J2-14
#NET "cf_d<8>" LOC = "P202"; #J2-15
#NET "cf_pdiag" LOC = "P203"; #J2-16
#NET "cf_dase" LOC = "P204"; #J2-17
#NET "cf_iordy" LOC = "P205"; #J2-18
#NET "cf_rst_n" LOC = "P206"; #J2-19
#
# Connector J4
#
# For B5-Compact-Flash:
#
#NET "GCK2" LOC = "P182"; #J1-2 (Global Clock Input)
#NET "IO" LOC = "P160"; #J1-3
#NET "cf_intrq" LOC = "P161"; #J1-4
#NET "cf_wr_n" LOC = "P162"; #J1-5
#NET "cf_rd_n" LOC = "P163"; #J1-6
#NET "cf_cs1_n" LOC = "P164"; #J1-7
#NET "cf_d<15>" LOC = "P165"; #J1-8
#NET "cf_d<14>" LOC = "P166"; #J1-9
#NET "cf_d<13>" LOC = "P167"; #J1-10
#NET "cf_d<12>" LOC = "P168"; #J1-11
#NET "cf_d<11>" LOC = "P172"; #J1-12
#NET "cf_present" LOC = "P173"; #J1-13
#NET "cf_d<3>" LOC = "P174"; #J1-14
#NET "cf_d<4>" LOC = "P175"; #J1-15
#NET "cf_d<5>" LOC = "P176"; #J1-16
#NET "cf_d<6>" LOC = "P178"; #J1-17
#NET "cf_d<7>" LOC = "P179"; #J1-18
#NET "cf_cs0_n" LOC = "P180"; #J1-19
#
# Connector J6
#
# For modified B3-SRAM
# Note: B3-SRAM must be fitted to J6/J9
#
NET "ram_data<0>" LOC = "p133"; #J2-2 (I/O - not a global clock input)
NET "ram_data<1>" LOC = "p134"; #J2-3
NET "ram_data<2>" LOC = "p135"; #J2-4
NET "ram_data<3>" LOC = "p136"; #J2-5
NET "ram_data<4>" LOC = "p138"; #J2-6
NET "ram_data<5>" LOC = "p139"; #J2-7
NET "ram_data<6>" LOC = "p140"; #J2-8
NET "ram_data<7>" LOC = "p141"; #J2-9
NET "ram_data<8>" LOC = "p142"; #J2-10
NET "ram_data<9>" LOC = "p146"; #J2-11
NET "ram_data<10>" LOC = "p147"; #J2-12
NET "ram_data<11>" LOC = "p148"; #J2-13
NET "ram_data<12>" LOC = "p149"; #J2-14
NET "ram_data<13>" LOC = "p150"; #J2-15
NET "ram_data<14>" LOC = "p151"; #J2-16
NET "ram_data<15>" LOC = "p152"; #J2-17
NET "ram_wrun" LOC = "p153"; #J2-18
NET "ram_wrln" LOC = "p154"; #J2-19
#
# Connector J9
#
# For modified B3-SRAM
# Note: B3-SRAM must be fitted to J6/J9
#
NET "ram_addr<0>" LOC = "p108"; #J1-2 (I/O - not a global clock input)
NET "ram_addr<1>" LOC = "p109"; #J1-3
NET "ram_addr<2>" LOC = "p110"; #J1-4
NET "ram_addr<3>" LOC = "p111"; #J1-5
NET "ram_addr<4>" LOC = "p112"; #J1-6
NET "ram_addr<5>" LOC = "p113"; #J1-7
NET "ram_addr<6>" LOC = "p114"; #J1-8
NET "ram_addr<7>" LOC = "p115"; #J1-9
NET "ram_csn" LOC = "p119"; #J1-10
NET "ram_addr<8>" LOC = "p120"; #J1-11
NET "ram_addr<9>" LOC = "p121"; #J1-12
NET "ram_addr<10>" LOC = "p122"; #J1-13
NET "ram_addr<11>" LOC = "p123"; #J1-14
NET "ram_addr<12>" LOC = "p125"; #J1-15
NET "ram_addr<13>" LOC = "p126"; #J1-16
NET "ram_addr<14>" LOC = "p127"; #J1-17
NET "ram_addr<15>" LOC = "p129"; #J1-18
NET "ram_addr<16>" LOC = "p132"; #J1-19
#
# Connector J10
#
#
NET "SysClk" LOC = "p77"; #pin 2 (GCK1 - global clock input)
NET "led" LOC = "p49"; #pin 3 (LED output)
#NET "uart_csn" LOC = "p57"; #pin 4
#NET "test_rw" LOC = "p58"; #pin 5
#NET "test_d0" LOC = "p59"; #pin 6
#NET "test_d1" LOC = "p60"; #pin 7
NET "reset_n" LOC = "p61"; #pin 8 (Test Input button)
#NET "test_cc<0>" LOC = "p67"; #pin 11
#NET "test_cc<1>" LOC = "p68"; #pin 12
#NET "test_cc<2>" LOC = "p69"; #pin 13
#NET "test_cc<3>" LOC = "p70"; #pin 14
#NET "test_cc<4>" LOC = "p71"; #pin 15
#NET "test_cc<5>" LOC = "p73"; #pin 16
#NET "test_cc<6>" LOC = "p74"; #pin 17
#NET "test_cc<7>" LOC = "p75"; #pin 18
#NET "IO" LOC = "p81"; #pin 19
#
# Connector J11
#
#NET "GCK0" LOC = "p80"; #pin 2 (Global Clock input)
NET "porta<0>" LOC = "p82"; #pin 3
NET "porta<1>" LOC = "p83"; #pin 4
NET "porta<2>" LOC = "p84"; #pin 5
NET "porta<3>" LOC = "p86"; #pin 6
NET "porta<4>" LOC = "p87"; #pin 7
NET "porta<5>" LOC = "p88"; #pin 8
NET "porta<6>" LOC = "p89"; #pin 9
NET "porta<7>" LOC = "p90"; #pin 10
NET "portb<0>" LOC = "p94"; #pin 11
NET "portb<1>" LOC = "p95"; #pin 12
NET "portb<2>" LOC = "p96"; #pin 13
NET "portb<3>" LOC = "p97"; #pin 14
NET "portb<4>" LOC = "p98"; #pin 15
NET "portb<5>" LOC = "p99"; #pin 16
NET "portb<6>" LOC = "p100"; #pin 17
NET "portb<7>" LOC = "p101"; #pin 18
NET "timer_out" LOC = "p102"; #pin 19
#
# Connector J8
#
# B3-FPGA-CPU-IO Module
#
#NET "aux_clock" LOC = "p24"; #J1-2 (Note this is an I/O pad ... not a clock input)
#NET "buzzer" LOC = "p27"; #J1-3
#NET "mouse_clock" LOC = "p29"; #J1-4
#NET "mouse_data" LOC = "p30"; #J1-5
NET "cts_n" LOC = "p31"; #J1-6
NET "rts_n" LOC = "p33"; #J1-7
NET "txbit" LOC = "p34"; #J1-8
NET "rxbit" LOC = "p35"; #J1-9
NET "kb_clock" LOC = "p36"; #J1-10
NET "kb_data" LOC = "p37"; #J1-11
NET "v_drive" LOC = "p41"; #J1-12
NET "h_drive" LOC = "p42"; #J1-13
NET "blue_lo" LOC = "p43"; #J1-14
NET "blue_hi" LOC = "p44"; #J1-15
NET "green_lo" LOC = "p45"; #J1-16
NET "green_hi" LOC = "p46"; #J1-17
NET "red_lo" LOC = "p47"; #J1-18
NET "red_hi" LOC = "p48"; #J1-19
#
# Connector J5
#
# Printer port
#
#NET "strobe_n" LOC = "p3"; #J5-1
#NET "autofd_n" LOC = "p4"; #J5-2
#NET "pd<0>" LOC = "p5"; #J5-3
#NET "fault_n" LOC = "p6"; #J5-4
#NET "pd<1>" LOC = "p7"; #J5-5
#NET "init_n" LOC = "p8"; #J5-6
#NET "pd<2>" LOC = "p9"; #J5-7
#NET "selin" LOC = "p10"; #J5-8
#NET "pd<3>" LOC = "p14"; #J5-9
#NET "pd<4>" LOC = "p15"; #J5-11
#NET "pd<5>" LOC = "p16"; #J5-13
#NET "pd<6>" LOC = "p17"; #J5-15
#NET "pd<7>" LOC = "p18"; #J5-17
#NET "ack" LOC = "p20"; #J5-19
#NET "busy" LOC = "p21"; #J5-21
#NET "pe" LOC = "p22"; #J5-23
#NET "sel" LOC = "p23"; #J5-25
#
# Timing Groups
#
INST "ram_addr<0>" TNM = "ram_addr";
INST "ram_addr<1>" TNM = "ram_addr";
INST "ram_addr<2>" TNM = "ram_addr";
INST "ram_addr<3>" TNM = "ram_addr";
INST "ram_addr<4>" TNM = "ram_addr";
INST "ram_addr<5>" TNM = "ram_addr";
INST "ram_addr<6>" TNM = "ram_addr";
INST "ram_addr<7>" TNM = "ram_addr";
INST "ram_addr<8>" TNM = "ram_addr";
INST "ram_addr<9>" TNM = "ram_addr";
INST "ram_addr<10>" TNM = "ram_addr";
INST "ram_addr<11>" TNM = "ram_addr";
INST "ram_addr<12>" TNM = "ram_addr";
INST "ram_addr<13>" TNM = "ram_addr";
INST "ram_addr<14>" TNM = "ram_addr";
INST "ram_addr<15>" TNM = "ram_addr";
INST "ram_addr<16>" TNM = "ram_addr";
#
INST "ram_data<0>" TNM = "ram_data";
INST "ram_data<1>" TNM = "ram_data";
INST "ram_data<2>" TNM = "ram_data";
INST "ram_data<3>" TNM = "ram_data";
INST "ram_data<4>" TNM = "ram_data";
INST "ram_data<5>" TNM = "ram_data";
INST "ram_data<6>" TNM = "ram_data";
INST "ram_data<7>" TNM = "ram_data";
INST "ram_data<8>" TNM = "ram_data";
INST "ram_data<9>" TNM = "ram_data";
INST "ram_data<10>" TNM = "ram_data";
INST "ram_data<11>" TNM = "ram_data";
INST "ram_data<12>" TNM = "ram_data";
INST "ram_data<13>" TNM = "ram_data";
INST "ram_data<14>" TNM = "ram_data";
INST "ram_data<15>" TNM = "ram_data";
#
INST "ram_wrln" TNM = "ram_wr";
INST "ram_wrun" TNM = "ram_wr";
#INST "ram_csn" TNM = "ram_cs";
#
#
# Timing Constraints
#
NET "SysClk" TNM_NET = "SysClk";
TIMESPEC "TS_SysClk" = PERIOD "SysClk" 20 ns HIGH 50 %;
#TIMEGRP "ram_cs" OFFSET = OUT 40 ns AFTER "SysClk";
TIMEGRP "ram_wr" OFFSET = OUT 40 ns AFTER "SysClk";
TIMEGRP "ram_addr" OFFSET = OUT 40 ns AFTER "SysClk";
TIMEGRP "ram_data" OFFSET = OUT 40 ns AFTER "SysClk";
TIMEGRP "ram_data" OFFSET = IN 15 ns BEFORE "SysClk";
#
# Fast I/O Pins
#
NET "ram_addr<0>" FAST;
NET "ram_addr<1>" FAST;
NET "ram_addr<2>" FAST;
NET "ram_addr<3>" FAST;
NET "ram_addr<4>" FAST;
NET "ram_addr<5>" FAST;
NET "ram_addr<6>" FAST;
NET "ram_addr<7>" FAST;
NET "ram_addr<8>" FAST;
NET "ram_addr<9>" FAST;
NET "ram_addr<10>" FAST;
NET "ram_addr<11>" FAST;
NET "ram_addr<12>" FAST;
NET "ram_addr<13>" FAST;
NET "ram_addr<14>" FAST;
NET "ram_addr<15>" FAST;
NET "ram_addr<16>" FAST;
#
NET "ram_wrln" FAST;
NET "ram_wrun" FAST;
NET "ram_csn" FAST;
#
NET "ram_data<0>" FAST;
NET "ram_data<1>" FAST;
NET "ram_data<2>" FAST;
NET "ram_data<3>" FAST;
NET "ram_data<4>" FAST;
NET "ram_data<5>" FAST;
NET "ram_data<6>" FAST;
NET "ram_data<7>" FAST;
NET "ram_data<8>" FAST;
NET "ram_data<9>" FAST;
NET "ram_data<10>" FAST;
NET "ram_data<11>" FAST;
NET "ram_data<12>" FAST;
NET "ram_data<13>" FAST;
NET "ram_data<14>" FAST;
NET "ram_data<15>" FAST;
Go to most recent revision | Compare with Previous | Blame | View Log