URL
https://opencores.org/ocsvn/System09/System09/trunk
Subversion Repositories System09
[/] [System09/] [trunk/] [rtl/] [Cyclone2/] [wb_rom.vhd] - Rev 155
Go to most recent revision | Compare with Previous | Blame | View Log
--===========================================================================-- -- -- S Y N T H E Z I A B L E ROM / WISHBONE interface -- -- www.OpenCores.Org - August 2003 -- This core adheres to the GNU public license -- -- File name : wb_rom.vhd -- -- Purpose : Implements a WISHBONE compatble interface -- for an External ROM -- -- Dependencies : ieee.Std_Logic_1164 -- ieee.std_logic_unsigned -- work.std_logic_arith (MTI's mti_std_logic_arith.vhd) -- -- Author : Michael L. Hasenfratz Sr. -- --===========================================================================---- -- -- Revision History: -- -- Date: Revision Author --===========================================================================-- -- 5 Aug 2003 0.1 Michael L. Hasenfratz Sr. -- Created -- library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_unsigned.all; use ieee.std_logic_arith.all; entity wb_rom is generic ( ROM_WIDTH : positive range 1 to 64 := 8; -- data bits WIDE ROM_WIDTHAD : positive range 1 to 32 := 8 -- address bits; ); port ( DAT_O : out std_logic_vector(ROM_WIDTH-1 downto 0); ADR_I : in std_logic_vector(ROM_WIDTHAD-1 downto 0); SEL_I : in std_logic_vector((ROM_WIDTH/8)-1 downto 0); STB_I : in std_logic; -- VMA (Valid Memory Access) CYC_I : in std_logic; -- CYC in progress ACK_O : out std_logic; -- Data ready rom_adr : out std_logic_vector(ROM_WIDTHAD-1 downto 0); rom_dat : in std_logic_vector(ROM_WIDTH-1 downto 0); rom_csn : out std_logic; -- ROM Chip Select rom_oen : out std_logic -- ROM Output Enable ); end; architecture bhv_wb_rom of wb_rom is signal sel : std_logic; -- internal SELECT begin --------------------------------------------------------- -- Interconnections --------------------------------------------------------- sel0 : process(SEL_I, CYC_I, STB_I) variable isel : std_logic; begin isel := '0'; -- reset 'or' -- look for ANY selects for idx in SEL_I'RANGE loop isel := isel or SEL_I(idx); end loop; sel <= isel and CYC_I; end process; rom_adr <= ADR_I; rom_csn <= not(sel); rom_oen <= not(sel) and STB_I; DAT_O <= rom_dat; ACK_O <= sel and STB_I; end bhv_wb_rom;
Go to most recent revision | Compare with Previous | Blame | View Log