URL
https://opencores.org/ocsvn/System09/System09/trunk
Subversion Repositories System09
[/] [System09/] [trunk/] [rtl/] [System09_Terasic_DE1/] [system09_assignment_defaults.qdf] - Rev 169
Go to most recent revision | Compare with Previous | Blame | View Log
# -------------------------------------------------------------------------- #
#
# Copyright (C) 1991-2009 Altera Corporation
# Your use of Altera Corporation's design tools, logic functions
# and other software and tools, and its AMPP partner logic
# functions, and any output files from any of the foregoing
# (including device programming or simulation files), and any
# associated documentation or information are expressly subject
# to the terms and conditions of the Altera Program License
# Subscription Agreement, Altera MegaCore Function License
# Agreement, or other applicable license agreement, including,
# without limitation, that your use is for the sole purpose of
# programming logic devices manufactured by Altera and sold by
# Altera or its authorized distributors. Please refer to the
# applicable agreement for further details.
#
# -------------------------------------------------------------------------- #
#
# Quartus II
# Version 9.0 Build 235 06/17/2009 Service Pack 2 SJ Full Version
# Date created = 17:10:05 March 10, 2010
#
# -------------------------------------------------------------------------- #
#
# Note:
#
# 1) Do not modify this file. This file was generated
# automatically by the Quartus II software and is used
# to preserve global assignments across Quartus II versions.
#
# -------------------------------------------------------------------------- #
set_global_assignment -name PROJECT_SHOW_ENTITY_NAME On
set_global_assignment -name PROJECT_USE_SIMPLIFIED_NAMES Off
set_global_assignment -name ENABLE_REDUCED_MEMORY_MODE Off
set_global_assignment -name VER_COMPATIBLE_DB_DIR export_db
set_global_assignment -name AUTO_EXPORT_VER_COMPATIBLE_DB Off
set_global_assignment -name SMART_RECOMPILE Off
set_global_assignment -name FLOW_DISABLE_ASSEMBLER Off
set_global_assignment -name FLOW_ENABLE_HC_COMPARE Off
set_global_assignment -name HC_OUTPUT_DIR hc_output
set_global_assignment -name SAVE_MIGRATION_INFO_DURING_COMPILATION Off
set_global_assignment -name FLOW_ENABLE_IO_ASSIGNMENT_ANALYSIS Off
set_global_assignment -name RUN_FULL_COMPILE_ON_DEVICE_CHANGE On
set_global_assignment -name FLOW_ENABLE_RTL_VIEWER Off
set_global_assignment -name READ_OR_WRITE_IN_BYTE_ADDRESS "Use global settings"
set_global_assignment -name FLOW_HARDCOPY_DESIGN_READINESS_CHECK On
set_global_assignment -name DEFAULT_HOLD_MULTICYCLE "Same as Multicycle"
set_global_assignment -name CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS On
set_global_assignment -name CUT_OFF_READ_DURING_WRITE_PATHS On
set_global_assignment -name CUT_OFF_IO_PIN_FEEDBACK On
set_global_assignment -name DO_COMBINED_ANALYSIS Off
set_global_assignment -name IGNORE_CLOCK_SETTINGS Off
set_global_assignment -name ANALYZE_LATCHES_AS_SYNCHRONOUS_ELEMENTS On
set_global_assignment -name ENABLE_RECOVERY_REMOVAL_ANALYSIS Off
set_global_assignment -name ENABLE_CLOCK_LATENCY Off
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family ACEX1K
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family MAX7000B
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "HardCopy II"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family FLEX10KA
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "Stratix IV"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "Cyclone III"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "HardCopy Stratix"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family APEX20KE
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family MAX7000AE
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family Cyclone
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "Stratix II GX"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family FLEX10K
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "MAX II"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family APEX20KC
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "Arria II GX"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "Stratix GX"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "HardCopy III"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family MAX7000S
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family FLEX6000
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "APEX II"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family FLEX10KE
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "Cyclone II"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "HardCopy IV"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "Cyclone III LS"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "Stratix III"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "Arria GX"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family MAX3000A
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "Stratix II"
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family Stratix
set_global_assignment -name NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT 10
set_global_assignment -name NUMBER_OF_DESTINATION_TO_REPORT 10
set_global_assignment -name NUMBER_OF_PATHS_TO_REPORT 200
set_global_assignment -name DO_MIN_ANALYSIS Off
set_global_assignment -name DO_MIN_TIMING Off
set_global_assignment -name REPORT_IO_PATHS_SEPARATELY Off
set_global_assignment -name FLOW_ENABLE_TIMING_CONSTRAINT_CHECK Off
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family ACEX1K
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family MAX7000B
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "HardCopy II"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family FLEX10KA
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Stratix IV"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Cyclone III"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family "HardCopy Stratix"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family APEX20KE
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family MAX7000AE
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family Cyclone
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Stratix II GX"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family FLEX10K
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family "MAX II"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family APEX20KC
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Arria II GX"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family "Stratix GX"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "HardCopy III"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family MAX7000S
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family FLEX6000
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family "APEX II"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family FLEX10KE
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Cyclone II"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "HardCopy IV"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Cyclone III LS"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Stratix III"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Arria GX"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family MAX3000A
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Stratix II"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family Stratix
set_global_assignment -name TIMEQUEST_DO_REPORT_TIMING Off
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family ACEX1K
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family MAX7000B
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "HardCopy II"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family FLEX10KA
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "Stratix IV"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "Cyclone III"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "HardCopy Stratix"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family APEX20KE
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family MAX7000AE
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family Cyclone
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "Stratix II GX"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family FLEX10K
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "MAX II"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family APEX20KC
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "Arria II GX"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "Stratix GX"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "HardCopy III"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family MAX7000S
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family FLEX6000
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "APEX II"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family FLEX10KE
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "Cyclone II"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "HardCopy IV"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "Cyclone III LS"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "Stratix III"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "Arria GX"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family MAX3000A
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "Stratix II"
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family Stratix
set_global_assignment -name MUX_RESTRUCTURE Auto
set_global_assignment -name ENABLE_IP_DEBUG Off
set_global_assignment -name SAVE_DISK_SPACE On
set_global_assignment -name DISABLE_OCP_HW_EVAL Off
set_global_assignment -name DEVICE_FILTER_PACKAGE Any
set_global_assignment -name DEVICE_FILTER_PIN_COUNT Any
set_global_assignment -name DEVICE_FILTER_SPEED_GRADE Any
set_global_assignment -name EDA_DESIGN_ENTRY_SYNTHESIS_TOOL "<None>"
set_global_assignment -name VERILOG_INPUT_VERSION Verilog_2001
set_global_assignment -name VHDL_INPUT_VERSION VHDL93
set_global_assignment -name FAMILY "Stratix II"
set_global_assignment -name TRUE_WYSIWYG_FLOW Off
set_global_assignment -name SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES Off
set_global_assignment -name STATE_MACHINE_PROCESSING Auto
set_global_assignment -name SAFE_STATE_MACHINE Off
set_global_assignment -name EXTRACT_VERILOG_STATE_MACHINES On
set_global_assignment -name EXTRACT_VHDL_STATE_MACHINES On
set_global_assignment -name IGNORE_VERILOG_INITIAL_CONSTRUCTS Off
set_global_assignment -name VERILOG_CONSTANT_LOOP_LIMIT 5000
set_global_assignment -name VERILOG_NON_CONSTANT_LOOP_LIMIT 250
set_global_assignment -name ADD_PASS_THROUGH_LOGIC_TO_INFERRED_RAMS On
set_global_assignment -name PARALLEL_SYNTHESIS Off
set_global_assignment -name DSP_BLOCK_BALANCING Auto
set_global_assignment -name MAX_BALANCING_DSP_BLOCKS "-1 (Unlimited)"
set_global_assignment -name NOT_GATE_PUSH_BACK On
set_global_assignment -name ALLOW_POWER_UP_DONT_CARE On
set_global_assignment -name REMOVE_REDUNDANT_LOGIC_CELLS Off
set_global_assignment -name REMOVE_DUPLICATE_REGISTERS On
set_global_assignment -name IGNORE_CARRY_BUFFERS Off
set_global_assignment -name IGNORE_CASCADE_BUFFERS Off
set_global_assignment -name IGNORE_GLOBAL_BUFFERS Off
set_global_assignment -name IGNORE_ROW_GLOBAL_BUFFERS Off
set_global_assignment -name IGNORE_LCELL_BUFFERS Off
set_global_assignment -name MAX7000_IGNORE_LCELL_BUFFERS AUTO
set_global_assignment -name IGNORE_SOFT_BUFFERS On
set_global_assignment -name MAX7000_IGNORE_SOFT_BUFFERS Off
set_global_assignment -name LIMIT_AHDL_INTEGERS_TO_32_BITS Off
set_global_assignment -name AUTO_GLOBAL_CLOCK_MAX On
set_global_assignment -name AUTO_GLOBAL_OE_MAX On
set_global_assignment -name MAX_AUTO_GLOBAL_REGISTER_CONTROLS On
set_global_assignment -name AUTO_IMPLEMENT_IN_ROM Off
set_global_assignment -name APEX20K_TECHNOLOGY_MAPPER Lut
set_global_assignment -name OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name STRATIXII_OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name CYCLONE_OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name CYCLONEII_OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name STRATIX_OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name MAXII_OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name MAX7000_OPTIMIZATION_TECHNIQUE Speed
set_global_assignment -name APEX20K_OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name MERCURY_OPTIMIZATION_TECHNIQUE Area
set_global_assignment -name FLEX6K_OPTIMIZATION_TECHNIQUE Area
set_global_assignment -name FLEX10K_OPTIMIZATION_TECHNIQUE Area
set_global_assignment -name ALLOW_XOR_GATE_USAGE On
set_global_assignment -name AUTO_LCELL_INSERTION On
set_global_assignment -name CARRY_CHAIN_LENGTH 48
set_global_assignment -name FLEX6K_CARRY_CHAIN_LENGTH 32
set_global_assignment -name FLEX10K_CARRY_CHAIN_LENGTH 32
set_global_assignment -name MERCURY_CARRY_CHAIN_LENGTH 48
set_global_assignment -name STRATIX_CARRY_CHAIN_LENGTH 70
set_global_assignment -name STRATIXII_CARRY_CHAIN_LENGTH 70
set_global_assignment -name CASCADE_CHAIN_LENGTH 2
set_global_assignment -name PARALLEL_EXPANDER_CHAIN_LENGTH 16
set_global_assignment -name MAX7000_PARALLEL_EXPANDER_CHAIN_LENGTH 4
set_global_assignment -name AUTO_CARRY_CHAINS On
set_global_assignment -name AUTO_CASCADE_CHAINS On
set_global_assignment -name AUTO_PARALLEL_EXPANDERS On
set_global_assignment -name AUTO_OPEN_DRAIN_PINS On
set_global_assignment -name ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP Off
set_global_assignment -name AUTO_ROM_RECOGNITION On
set_global_assignment -name AUTO_RAM_RECOGNITION On
set_global_assignment -name AUTO_DSP_RECOGNITION On
set_global_assignment -name AUTO_SHIFT_REGISTER_RECOGNITION Auto
set_global_assignment -name AUTO_CLOCK_ENABLE_RECOGNITION On
set_global_assignment -name STRICT_RAM_RECOGNITION Off
set_global_assignment -name ALLOW_SYNCH_CTRL_USAGE On
set_global_assignment -name FORCE_SYNCH_CLEAR Off
set_global_assignment -name AUTO_RAM_BLOCK_BALANCING On
set_global_assignment -name AUTO_RAM_TO_LCELL_CONVERSION Off
set_global_assignment -name AUTO_RESOURCE_SHARING Off
set_global_assignment -name ALLOW_ANY_RAM_SIZE_FOR_RECOGNITION Off
set_global_assignment -name ALLOW_ANY_ROM_SIZE_FOR_RECOGNITION Off
set_global_assignment -name ALLOW_ANY_SHIFT_REGISTER_SIZE_FOR_RECOGNITION Off
set_global_assignment -name MAX7000_FANIN_PER_CELL 100
set_global_assignment -name USE_LOGICLOCK_CONSTRAINTS_IN_BALANCING On
set_global_assignment -name MAX_RAM_BLOCKS_M512 "-1 (Unlimited)"
set_global_assignment -name MAX_RAM_BLOCKS_M4K "-1 (Unlimited)"
set_global_assignment -name MAX_RAM_BLOCKS_MRAM "-1 (Unlimited)"
set_global_assignment -name IGNORE_TRANSLATE_OFF_AND_SYNTHESIS_OFF Off
set_global_assignment -name STRATIXGX_BYPASS_REMAPPING_OF_FORCE_SIGNAL_DETECT_SIGNAL_THRESHOLD_SELECT Off
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS Off
set_global_assignment -name SHOW_PARAMETER_SETTINGS_TABLES_IN_SYNTHESIS_REPORT On
set_global_assignment -name IGNORE_MAX_FANOUT_ASSIGNMENTS Off
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 2
set_global_assignment -name OPTIMIZE_POWER_DURING_SYNTHESIS "Normal compilation"
set_global_assignment -name HDL_MESSAGE_LEVEL Level2
set_global_assignment -name USE_HIGH_SPEED_ADDER Auto
set_global_assignment -name NUMBER_OF_REMOVED_REGISTERS_REPORTED 100
set_global_assignment -name NUMBER_OF_INVERTED_REGISTERS_REPORTED 100
set_global_assignment -name SYNTH_CLOCK_MUX_PROTECTION On
set_global_assignment -name SYNTH_GATED_CLOCK_CONVERSION Off
set_global_assignment -name BLOCK_DESIGN_NAMING Auto
set_global_assignment -name SYNTH_PROTECT_SDC_CONSTRAINT Off
set_global_assignment -name SYNTHESIS_EFFORT Auto
set_global_assignment -name SHIFT_REGISTER_RECOGNITION_ACLR_SIGNAL On
set_global_assignment -name PRE_MAPPING_RESYNTHESIS Off
set_global_assignment -name SYNTH_MESSAGE_LEVEL Medium
set_global_assignment -name ROUTER_TIMING_OPTIMIZATION_LEVEL Normal
set_global_assignment -name PLACEMENT_EFFORT_MULTIPLIER 1.0
set_global_assignment -name ROUTER_EFFORT_MULTIPLIER 1.0
set_global_assignment -name FIT_ATTEMPTS_TO_SKIP 0.0
set_global_assignment -name ECO_ALLOW_ROUTING_CHANGES Off
set_global_assignment -name DEVICE AUTO
set_global_assignment -name BASE_PIN_OUT_FILE_ON_SAMEFRAME_DEVICE Off
set_global_assignment -name ENABLE_JTAG_BST_SUPPORT Off
set_global_assignment -name MAX7000_ENABLE_JTAG_BST_SUPPORT On
set_global_assignment -name RESERVE_NCEO_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "Use as programming pin"
set_global_assignment -name STRATIXIII_UPDATE_MODE Standard
set_global_assignment -name STRATIX_UPDATE_MODE Standard
set_global_assignment -name STRATIXIII_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name CYCLONEIII_CONFIGURATION_SCHEME "Active Serial"
set_global_assignment -name STRATIXII_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name CYCLONEII_CONFIGURATION_SCHEME "Active Serial"
set_global_assignment -name APEX20K_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name STRATIX_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name CYCLONE_CONFIGURATION_SCHEME "Active Serial"
set_global_assignment -name MERCURY_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name FLEX6K_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name FLEX10K_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name APEXII_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name USER_START_UP_CLOCK Off
set_global_assignment -name ENABLE_VREFA_PIN Off
set_global_assignment -name ENABLE_VREFB_PIN Off
set_global_assignment -name ALWAYS_ENABLE_INPUT_BUFFERS Off
set_global_assignment -name ENABLE_ASMI_FOR_FLASH_LOADER Off
set_global_assignment -name ENABLE_DEVICE_WIDE_RESET Off
set_global_assignment -name ENABLE_DEVICE_WIDE_OE Off
set_global_assignment -name RESERVE_ALL_UNUSED_PINS "As output driving ground"
set_global_assignment -name FLEX10K_ENABLE_LOCK_OUTPUT Off
set_global_assignment -name ENABLE_INIT_DONE_OUTPUT Off
set_global_assignment -name RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_RDYNBUSY_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_DATA0_AFTER_CONFIGURATION "As input tri-stated"
set_global_assignment -name RESERVE_ASDO_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_DATA1_AFTER_CONFIGURATION "As input tri-stated"
set_global_assignment -name RESERVE_DATA7_THROUGH_DATA2_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_FLASH_NCE_AFTER_CONFIGURATION "As input tri-stated"
set_global_assignment -name RESERVE_OTHER_AP_PINS_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_DCLK_AFTER_CONFIGURATION "Use as programming pin"
set_global_assignment -name CRC_ERROR_CHECKING Off
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "Stratix GX"
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "HardCopy III"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "Cyclone II"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "HardCopy II"
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "Stratix IV"
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "HardCopy IV"
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "Cyclone III LS"
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "Cyclone III"
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "Stratix III"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "HardCopy Stratix"
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "Arria GX"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "Stratix II GX"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family Cyclone
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "Stratix II"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "MAX II"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family Stratix
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "Arria II GX"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING Off
set_global_assignment -name BLOCK_RAM_TO_MLAB_CELL_CONVERSION On
set_global_assignment -name BLOCK_RAM_AND_MLAB_EQUIVALENT_POWER_UP_CONDITIONS Auto
set_global_assignment -name BLOCK_RAM_AND_MLAB_EQUIVALENT_PAUSED_READ_CAPABILITIES Care
set_global_assignment -name PROGRAMMABLE_POWER_TECHNOLOGY_SETTING "Force All Tiles with Failing Timing Paths to High Speed"
set_global_assignment -name PROGRAMMABLE_POWER_MAXIMUM_HIGH_SPEED_FRACTION_OF_USED_LAB_TILES 1.0
set_global_assignment -name GUARANTEE_MIN_DELAY_CORNER_IO_ZERO_HOLD_TIME On
set_global_assignment -name OPTIMIZE_POWER_DURING_FITTING "Normal compilation"
set_global_assignment -name OPTIMIZE_SSN Off -family "Cyclone III LS"
set_global_assignment -name OPTIMIZE_SSN Off -family "Cyclone III"
set_global_assignment -name OPTIMIZE_SSN Off -family "Stratix III"
set_global_assignment -name OPTIMIZE_SSN Off -family "HardCopy III"
set_global_assignment -name OPTIMIZE_SSN Off -family "HardCopy IV"
set_global_assignment -name OPTIMIZE_TIMING "Normal compilation"
set_global_assignment -name ECO_OPTIMIZE_TIMING Off
set_global_assignment -name ECO_REGENERATE_REPORT Off
set_global_assignment -name OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING On
set_global_assignment -name FIT_ONLY_ONE_ATTEMPT Off
set_global_assignment -name FINAL_PLACEMENT_OPTIMIZATION Automatically
set_global_assignment -name FITTER_AGGRESSIVE_ROUTABILITY_OPTIMIZATION Automatically
set_global_assignment -name SEED 1
set_global_assignment -name SLOW_SLEW_RATE Off
set_global_assignment -name PCI_IO Off
set_global_assignment -name TURBO_BIT On
set_global_assignment -name WEAK_PULL_UP_RESISTOR Off
set_global_assignment -name ENABLE_BUS_HOLD_CIRCUITRY Off
set_global_assignment -name AUTO_GLOBAL_MEMORY_CONTROLS Off
set_global_assignment -name MIGRATION_CONSTRAIN_CORE_RESOURCES On
set_global_assignment -name AUTO_PACKED_REGISTERS_STRATIXII AUTO
set_global_assignment -name AUTO_PACKED_REGISTERS_MAXII AUTO
set_global_assignment -name AUTO_PACKED_REGISTERS_CYCLONE Auto
set_global_assignment -name AUTO_PACKED_REGISTERS Off
set_global_assignment -name AUTO_PACKED_REGISTERS_STRATIX AUTO
set_global_assignment -name NORMAL_LCELL_INSERT On
set_global_assignment -name CARRY_OUT_PINS_LCELL_INSERT On
set_global_assignment -name AUTO_DELAY_CHAINS On
set_global_assignment -name XSTL_INPUT_ALLOW_SE_BUFFER Off
set_global_assignment -name TREAT_BIDIR_AS_OUTPUT Off
set_global_assignment -name AUTO_MERGE_PLLS On
set_global_assignment -name IGNORE_MODE_FOR_MERGE Off
set_global_assignment -name AUTO_TURBO_BIT ON
set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC_FOR_AREA Off
set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC Off
set_global_assignment -name PHYSICAL_SYNTHESIS_LOG_FILE Off
set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION Off
set_global_assignment -name PHYSICAL_SYNTHESIS_MAP_LOGIC_TO_MEMORY_FOR_AREA Off
set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_RETIMING Off
set_global_assignment -name PHYSICAL_SYNTHESIS_ASYNCHRONOUS_SIGNAL_PIPELINING Off
set_global_assignment -name IO_PLACEMENT_OPTIMIZATION On
set_global_assignment -name ALLOW_LVTTL_LVCMOS_INPUT_LEVELS_TO_OVERDRIVE_INPUT_BUFFER Off
set_global_assignment -name OVERRIDE_DEFAULT_ELECTROMIGRATION_PARAMETERS Off
set_global_assignment -name FITTER_EFFORT "Auto Fit"
set_global_assignment -name FITTER_AUTO_EFFORT_DESIRED_SLACK_MARGIN 0ns
set_global_assignment -name PHYSICAL_SYNTHESIS_EFFORT Normal
set_global_assignment -name ROUTER_LCELL_INSERTION_AND_LOGIC_DUPLICATION AUTO
set_global_assignment -name ROUTER_REGISTER_DUPLICATION AUTO
set_global_assignment -name STRATIXGX_ALLOW_CLOCK_FANOUT_WITH_ANALOG_RESET Off
set_global_assignment -name AUTO_GLOBAL_CLOCK On
set_global_assignment -name AUTO_GLOBAL_OE On
set_global_assignment -name AUTO_GLOBAL_REGISTER_CONTROLS On
set_global_assignment -name FITTER_EARLY_TIMING_ESTIMATE_MODE Realistic
set_global_assignment -name STRATIXGX_ALLOW_GIGE_UNDER_FULL_DATARATE_RANGE Off
set_global_assignment -name STRATIXGX_ALLOW_RX_CORECLK_FROM_NON_RX_CLKOUT_SOURCE_IN_DOUBLE_DATA_WIDTH_MODE Off
set_global_assignment -name STRATIXGX_ALLOW_GIGE_IN_DOUBLE_DATA_WIDTH_MODE Off
set_global_assignment -name STRATIXGX_ALLOW_PARALLEL_LOOPBACK_IN_DOUBLE_DATA_WIDTH_MODE Off
set_global_assignment -name STRATIXGX_ALLOW_XAUI_IN_SINGLE_DATA_WIDTH_MODE Off
set_global_assignment -name STRATIXGX_ALLOW_XAUI_WITH_CORECLK_SELECTED_AT_RATE_MATCHER Off
set_global_assignment -name STRATIXGX_ALLOW_XAUI_WITH_RX_CORECLK_FROM_NON_TXPLL_SOURCE Off
set_global_assignment -name STRATIXGX_ALLOW_GIGE_WITH_CORECLK_SELECTED_AT_RATE_MATCHER Off
set_global_assignment -name STRATIXGX_ALLOW_GIGE_WITHOUT_8B10B Off
set_global_assignment -name STRATIXGX_ALLOW_GIGE_WITH_RX_CORECLK_FROM_NON_TXPLL_SOURCE Off
set_global_assignment -name STRATIXGX_ALLOW_POST8B10B_LOOPBACK Off
set_global_assignment -name STRATIXGX_ALLOW_REVERSE_PARALLEL_LOOPBACK Off
set_global_assignment -name STRATIXGX_ALLOW_USE_OF_GXB_COUPLED_IOS Off
set_global_assignment -name GENERATE_GXB_RECONFIG_MIF Off
set_global_assignment -name GENERATE_GXB_RECONFIG_MIF_WITH_PLL Off
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_WEAK_PULLUP "As input tri-stated with weak pull-up"
set_global_assignment -name STOP_AFTER_CONGESTION_MAP Off
set_global_assignment -name SAVE_INTERMEDIATE_FITTING_RESULTS Off
set_global_assignment -name ENABLE_HOLD_BACK_OFF On
set_global_assignment -name CONFIGURATION_VCCIO_LEVEL Auto
set_global_assignment -name FORCE_CONFIGURATION_VCCIO Off
set_global_assignment -name SYNCHRONIZER_IDENTIFICATION Off
set_global_assignment -name ENABLE_BENEFICIAL_SKEW_OPTIMIZATION -value OFF
set_global_assignment -name OPTIMIZE_FOR_METASTABILITY On
set_global_assignment -name CRC_ERROR_OPEN_DRAIN Off
set_global_assignment -name MAX_GLOBAL_CLOCKS_ALLOWED "-1 (Unlimited)"
set_global_assignment -name MAX_REGIONAL_CLOCKS_ALLOWED "-1 (Unlimited)"
set_global_assignment -name MAX_PERIPHERY_CLOCKS_ALLOWED "-1 (Unlimited)"
set_global_assignment -name MAX_CLOCKS_ALLOWED "-1 (Unlimited)"
set_global_assignment -name ACTIVE_SERIAL_CLOCK FREQ_40MHz
set_global_assignment -name STRATIXIII_MRAM_COMPATIBILITY On
set_global_assignment -name FORCE_FITTER_TO_AVOID_PERIPHERY_PLACEMENT_WARNINGS Off
set_global_assignment -name EDA_SIMULATION_TOOL "<None>"
set_global_assignment -name EDA_TIMING_ANALYSIS_TOOL "<None>"
set_global_assignment -name EDA_BOARD_DESIGN_TIMING_TOOL "<None>"
set_global_assignment -name EDA_BOARD_DESIGN_SYMBOL_TOOL "<None>"
set_global_assignment -name EDA_BOARD_DESIGN_SIGNAL_INTEGRITY_TOOL "<None>"
set_global_assignment -name EDA_BOARD_DESIGN_BOUNDARY_SCAN_TOOL "<None>"
set_global_assignment -name EDA_BOARD_DESIGN_TOOL "<None>"
set_global_assignment -name EDA_FORMAL_VERIFICATION_TOOL "<None>"
set_global_assignment -name EDA_RESYNTHESIS_TOOL "<None>"
set_global_assignment -name ON_CHIP_BITSTREAM_DECOMPRESSION On
set_global_assignment -name COMPRESSION_MODE Off
set_global_assignment -name CLOCK_SOURCE Internal
set_global_assignment -name CONFIGURATION_CLOCK_FREQUENCY "10 MHz"
set_global_assignment -name CONFIGURATION_CLOCK_DIVISOR 1
set_global_assignment -name ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE On
set_global_assignment -name FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE Off
set_global_assignment -name FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE On
set_global_assignment -name MAX7000S_JTAG_USER_CODE FFFF
set_global_assignment -name STRATIX_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name APEX20K_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name MERCURY_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name FLEX10K_JTAG_USER_CODE 7F
set_global_assignment -name MAX7000_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name MAX7000_USE_CHECKSUM_AS_USERCODE Off
set_global_assignment -name USE_CHECKSUM_AS_USERCODE Off
set_global_assignment -name SECURITY_BIT Off
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family ACEX1K
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family MAX7000B
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "HardCopy II"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family FLEX10KA
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Stratix IV"
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Cyclone III"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "HardCopy Stratix"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family APEX20KE
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family MAX7000AE
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family Cyclone
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "Stratix II GX"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family FLEX10K
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "MAX II"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family APEX20KC
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Arria II GX"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "Stratix GX"
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "HardCopy III"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family MAX7000S
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family FLEX6000
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "APEX II"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family FLEX10KE
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "Cyclone II"
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "HardCopy IV"
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Cyclone III LS"
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Stratix III"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "Arria GX"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family MAX3000A
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "Stratix II"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family Stratix
set_global_assignment -name CYCLONEIII_CONFIGURATION_DEVICE Auto
set_global_assignment -name STRATIXII_CONFIGURATION_DEVICE Auto
set_global_assignment -name APEX20K_CONFIGURATION_DEVICE Auto
set_global_assignment -name MERCURY_CONFIGURATION_DEVICE Auto
set_global_assignment -name FLEX6K_CONFIGURATION_DEVICE Auto
set_global_assignment -name FLEX10K_CONFIGURATION_DEVICE Auto
set_global_assignment -name CYCLONE_CONFIGURATION_DEVICE Auto
set_global_assignment -name STRATIX_CONFIGURATION_DEVICE Auto
set_global_assignment -name APEX20K_CONFIG_DEVICE_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name STRATIX_CONFIG_DEVICE_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name MERCURY_CONFIG_DEVICE_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name EPROM_USE_CHECKSUM_AS_USERCODE Off
set_global_assignment -name AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE On
set_global_assignment -name DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE Off
set_global_assignment -name GENERATE_TTF_FILE Off
set_global_assignment -name GENERATE_RBF_FILE Off
set_global_assignment -name GENERATE_HEX_FILE Off
set_global_assignment -name HEXOUT_FILE_START_ADDRESS 0
set_global_assignment -name HEXOUT_FILE_COUNT_DIRECTION Up
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "As output driving an unspecified signal"
set_global_assignment -name RELEASE_CLEARS_BEFORE_TRI_STATES Off
set_global_assignment -name AUTO_RESTART_CONFIGURATION On
set_global_assignment -name HARDCOPYII_POWER_ON_EXTRA_DELAY Off
set_global_assignment -name STRATIXII_MRAM_COMPATIBILITY Off
set_global_assignment -name CYCLONEII_M4K_COMPATIBILITY On
set_global_assignment -name ENABLE_OCT_DONE Off
set_global_assignment -name USE_CHECKERED_PATTERN_AS_UNINITIALIZED_RAM_CONTENT Off
set_global_assignment -name START_TIME 0ns
set_global_assignment -name SIMULATION_MODE TIMING
set_global_assignment -name AUTO_USE_SIMULATION_PDB_NETLIST Off
set_global_assignment -name ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS On
set_global_assignment -name SETUP_HOLD_DETECTION Off
set_global_assignment -name SETUP_HOLD_DETECTION_INPUT_REGISTERS_BIDIR_PINS_DISABLED Off
set_global_assignment -name CHECK_OUTPUTS Off
set_global_assignment -name SIMULATION_COVERAGE On
set_global_assignment -name SIMULATION_COMPLETE_COVERAGE_REPORT_PANEL On
set_global_assignment -name SIMULATION_MISSING_1_VALUE_COVERAGE_REPORT_PANEL On
set_global_assignment -name SIMULATION_MISSING_0_VALUE_COVERAGE_REPORT_PANEL On
set_global_assignment -name GLITCH_DETECTION Off
set_global_assignment -name GLITCH_INTERVAL 1ns
set_global_assignment -name SIMULATOR_GENERATE_SIGNAL_ACTIVITY_FILE Off
set_global_assignment -name SIMULATION_WITH_GLITCH_FILTERING_WHEN_GENERATING_SAF On
set_global_assignment -name SIMULATION_BUS_CHANNEL_GROUPING Off
set_global_assignment -name SIMULATION_VDB_RESULT_FLUSH On
set_global_assignment -name VECTOR_COMPARE_TRIGGER_MODE INPUT_EDGE
set_global_assignment -name SIMULATION_NETLIST_VIEWER Off
set_global_assignment -name SIMULATION_INTERCONNECT_DELAY_MODEL_TYPE TRANSPORT
set_global_assignment -name SIMULATION_CELL_DELAY_MODEL_TYPE TRANSPORT
set_global_assignment -name SIMULATOR_GENERATE_POWERPLAY_VCD_FILE Off
set_global_assignment -name SIMULATOR_PVT_TIMING_MODEL_TYPE AUTO
set_global_assignment -name SIMULATION_WITH_AUTO_GLITCH_FILTERING AUTO
set_global_assignment -name DRC_TOP_FANOUT 50
set_global_assignment -name DRC_FANOUT_EXCEEDING 30
set_global_assignment -name DRC_GATED_CLOCK_FEED 30
set_global_assignment -name HARDCOPY_FLOW_AUTOMATION MIGRATION_ONLY
set_global_assignment -name ENABLE_DRC_SETTINGS Off
set_global_assignment -name CLK_RULE_CLKNET_CLKSPINES_THRESHOLD 25
set_global_assignment -name DRC_DETAIL_MESSAGE_LIMIT 10
set_global_assignment -name DRC_VIOLATION_MESSAGE_LIMIT 30
set_global_assignment -name DRC_DEADLOCK_STATE_LIMIT 2
set_global_assignment -name MERGE_HEX_FILE Off
set_global_assignment -name GENERATE_SVF_FILE Off
set_global_assignment -name GENERATE_ISC_FILE Off
set_global_assignment -name GENERATE_JAM_FILE Off
set_global_assignment -name GENERATE_JBC_FILE Off
set_global_assignment -name GENERATE_JBC_FILE_COMPRESSED On
set_global_assignment -name GENERATE_CONFIG_SVF_FILE Off
set_global_assignment -name GENERATE_CONFIG_ISC_FILE Off
set_global_assignment -name GENERATE_CONFIG_JAM_FILE Off
set_global_assignment -name GENERATE_CONFIG_JBC_FILE Off
set_global_assignment -name GENERATE_CONFIG_JBC_FILE_COMPRESSED On
set_global_assignment -name GENERATE_CONFIG_HEXOUT_FILE Off
set_global_assignment -name ISP_CLAMP_STATE_DEFAULT "Tri-state"
set_global_assignment -name SIGNALPROBE_ALLOW_OVERUSE Off
set_global_assignment -name SIGNALPROBE_DURING_NORMAL_COMPILATION Off
set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT Off
set_global_assignment -name POWER_DEFAULT_TOGGLE_RATE 12.5%
set_global_assignment -name POWER_DEFAULT_INPUT_IO_TOGGLE_RATE 12.5%
set_global_assignment -name POWER_USE_PVA On
set_global_assignment -name POWER_USE_INPUT_FILE "No File"
set_global_assignment -name POWER_USE_INPUT_FILES Off
set_global_assignment -name POWER_VCD_FILTER_GLITCHES On
set_global_assignment -name POWER_REPORT_SIGNAL_ACTIVITY Off
set_global_assignment -name POWER_REPORT_POWER_DISSIPATION Off
set_global_assignment -name POWER_USE_DEVICE_CHARACTERISTICS TYPICAL
set_global_assignment -name POWER_AUTO_COMPUTE_TJ On
set_global_assignment -name POWER_TJ_VALUE 25
set_global_assignment -name POWER_USE_TA_VALUE 25
set_global_assignment -name POWER_USE_CUSTOM_COOLING_SOLUTION Off
set_global_assignment -name POWER_BOARD_TEMPERATURE 25
set_global_assignment -name INCREMENTAL_COMPILATION FULL_INCREMENTAL_COMPILATION
set_global_assignment -name AUTO_EXPORT_INCREMENTAL_COMPILATION Off
set_global_assignment -name INCREMENTAL_COMPILATION_EXPORT_NETLIST_TYPE POST_FIT
set_global_assignment -name OUTPUT_IO_TIMING_ENDPOINT "Near End"
set_global_assignment -name RTLV_REMOVE_FANOUT_FREE_REGISTERS On
set_global_assignment -name RTLV_SIMPLIFIED_LOGIC On
set_global_assignment -name RTLV_GROUP_RELATED_NODES On
set_global_assignment -name RTLV_GROUP_COMB_LOGIC_IN_CLOUD Off
set_global_assignment -name RTLV_GROUP_COMB_LOGIC_IN_CLOUD_TMV Off
set_global_assignment -name RTLV_GROUP_RELATED_NODES_TMV On
set_global_assignment -name EQC_CONSTANT_DFF_DETECTION On
set_global_assignment -name EQC_DUPLICATE_DFF_DETECTION On
set_global_assignment -name EQC_BBOX_MERGE On
set_global_assignment -name EQC_LVDS_MERGE On
set_global_assignment -name EQC_RAM_UNMERGING On
set_global_assignment -name EQC_DFF_SS_EMULATION On
set_global_assignment -name EQC_RAM_REGISTER_UNPACK On
set_global_assignment -name EQC_MAC_REGISTER_UNPACK On
set_global_assignment -name EQC_SET_PARTITION_BB_TO_VCC_GND On
set_global_assignment -name EQC_STRUCTURE_MATCHING On
set_global_assignment -name EQC_AUTO_BREAK_CONE On
set_global_assignment -name EQC_POWER_UP_COMPARE Off
set_global_assignment -name EQC_AUTO_COMP_LOOP_CUT On
set_global_assignment -name EQC_AUTO_INVERSION On
set_global_assignment -name EQC_AUTO_TERMINATE On
set_global_assignment -name EQC_SUB_CONE_REPORT Off
set_global_assignment -name EQC_RENAMING_RULES On
set_global_assignment -name EQC_PARAMETER_CHECK On
set_global_assignment -name EQC_AUTO_PORTSWAP On
set_global_assignment -name EQC_DETECT_DONT_CARES On
set_global_assignment -name EQC_SHOW_ALL_MAPPED_POINTS Off
set_global_assignment -name DUTY_CYCLE 50 -section_id ?
set_global_assignment -name INVERT_BASE_CLOCK Off -section_id ?
set_global_assignment -name MULTIPLY_BASE_CLOCK_PERIOD_BY 1 -section_id ?
set_global_assignment -name DIVIDE_BASE_CLOCK_PERIOD_BY 1 -section_id ?
set_global_assignment -name EDA_INPUT_GND_NAME GND -section_id ?
set_global_assignment -name EDA_INPUT_VCC_NAME VCC -section_id ?
set_global_assignment -name EDA_INPUT_DATA_FORMAT NONE -section_id ?
set_global_assignment -name EDA_SHOW_LMF_MAPPING_MESSAGES Off -section_id ?
set_global_assignment -name EDA_RUN_TOOL_AUTOMATICALLY Off -section_id ?
set_global_assignment -name RESYNTHESIS_RETIMING FULL -section_id ?
set_global_assignment -name RESYNTHESIS_OPTIMIZATION_EFFORT Normal -section_id ?
set_global_assignment -name RESYNTHESIS_PHYSICAL_SYNTHESIS Normal -section_id ?
set_global_assignment -name USE_GENERATED_PHYSICAL_CONSTRAINTS On -section_id ?
set_global_assignment -name VCCPD_VOLTAGE 3.3V -section_id ?
set_global_assignment -name EDA_USER_COMPILED_SIMULATION_LIBRARY_DIRECTORY "<None>" -section_id ?
set_global_assignment -name EDA_LAUNCH_CMD_LINE_TOOL Off -section_id ?
set_global_assignment -name EDA_NATIVELINK_GENERATE_SCRIPT_ONLY Off -section_id ?
set_global_assignment -name EDA_WAIT_FOR_GUI_TOOL_COMPLETION Off -section_id ?
set_global_assignment -name EDA_TRUNCATE_LONG_HIERARCHY_PATHS Off -section_id ?
set_global_assignment -name EDA_FLATTEN_BUSES Off -section_id ?
set_global_assignment -name EDA_MAP_ILLEGAL_CHARACTERS Off -section_id ?
set_global_assignment -name EDA_GENERATE_TIMING_CLOSURE_DATA Off -section_id ?
set_global_assignment -name EDA_GENERATE_POWER_INPUT_FILE Off -section_id ?
set_global_assignment -name EDA_TEST_BENCH_ENABLE_STATUS NOT_USED -section_id ?
set_global_assignment -name EDA_RTL_SIM_MODE NOT_USED -section_id ?
set_global_assignment -name EDA_MAINTAIN_DESIGN_HIERARCHY Off -section_id ?
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST Off -section_id ?
set_global_assignment -name EDA_WRITE_DEVICE_CONTROL_PORTS Off -section_id ?
set_global_assignment -name EDA_SIMULATION_VCD_OUTPUT_TCL_FILE Off -section_id ?
set_global_assignment -name EDA_SIMULATION_VCD_OUTPUT_SIGNALS_TO_TCL_FILE "All Except Combinational Logic Element Outputs" -section_id ?
set_global_assignment -name EDA_ENABLE_GLITCH_FILTERING Off -section_id ?
set_global_assignment -name EDA_WRITE_NODES_FOR_POWER_ESTIMATION OFF -section_id ?
set_global_assignment -name EDA_SETUP_HOLD_DETECTION_INPUT_REGISTERS_BIDIR_PINS_DISABLED Off -section_id ?
set_global_assignment -name EDA_WRITER_DONT_WRITE_TOP_ENTITY Off -section_id ?
set_global_assignment -name EDA_VHDL_ARCH_NAME structure -section_id ?
set_global_assignment -name EDA_IBIS_MODEL_SELECTOR Off -section_id ?
set_global_assignment -name EDA_IBIS_MUTUAL_COUPLING Off -section_id ?
set_global_assignment -name EDA_FORMAL_VERIFICATION_ALLOW_RETIMING Off -section_id ?
set_global_assignment -name EDA_BOARD_BOUNDARY_SCAN_OPERATION PRE_CONFIG -section_id ?
set_global_assignment -name EDA_GENERATE_RTL_SIMULATION_COMMAND_SCRIPT Off -section_id ?
set_global_assignment -name EDA_GENERATE_GATE_LEVEL_SIMULATION_COMMAND_SCRIPT Off -section_id ?
set_global_assignment -name SIM_VECTOR_COMPARED_CLOCK_OFFSET 0ns -section_id ?
set_global_assignment -name SIM_VECTOR_COMPARED_CLOCK_DUTY_CYCLE 50 -section_id ?
set_global_assignment -name APEX20K_CLIQUE_TYPE LAB -section_id ? -entity ?
set_global_assignment -name MAX7K_CLIQUE_TYPE LAB -section_id ? -entity ?
set_global_assignment -name MERCURY_CLIQUE_TYPE LAB -section_id ? -entity ?
set_global_assignment -name FLEX6K_CLIQUE_TYPE LAB -section_id ? -entity ?
set_global_assignment -name FLEX10K_CLIQUE_TYPE LAB -section_id ? -entity ?
set_global_assignment -name PARTITION_IMPORT_ASSIGNMENTS On -section_id ? -entity ?
set_global_assignment -name PARTITION_IMPORT_EXISTING_ASSIGNMENTS REPLACE_CONFLICTING -section_id ? -entity ?
set_global_assignment -name PARTITION_IMPORT_EXISTING_LOGICLOCK_REGIONS REPLACE_CONFLICTING -section_id ? -entity ?
set_global_assignment -name PARTITION_IMPORT_PROMOTE_ASSIGNMENTS On -section_id ? -entity ?
Go to most recent revision | Compare with Previous | Blame | View Log