URL
https://opencores.org/ocsvn/System09/System09/trunk
Subversion Repositories System09
[/] [System09/] [trunk/] [rtl/] [System09_Xilinx_ML506/] [my_system09.ucf] - Rev 174
Go to most recent revision | Compare with Previous | Blame | View Log
#PACE: Start of Constraints generated by PACE
#PACE: Start of PACE I/O Pin Assignments
# sys_clk = USER_CLK
NET sys_clk LOC="AH15"; # Bank 4, Vcco=3.3V, No DCI # sys_clk 100MHz clock
#
# PUSH BUTTONS
#
# rst_sw = FPGA_CPU_RESET_B
NET rst_sw LOC="E9"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors # rst_sw
# nmi_sw = GPIO_SW_C
NET nmi_sw LOC="AJ6"; # Bank 18, Vcco=3.3V, No DCI # nmi_sw
#
# LEDs
#
# leds = GPIO_LED_...
NET leds<0> LOC="H18"; # Bank 3, Vcco=2.5V, No DCI # leds<0>
NET leds<1> LOC="L18"; # Bank 3, Vcco=2.5V, No DCI # leds<1>
NET leds<2> LOC="G15"; # Bank 3, Vcco=2.5V, No DCI # leds<2>
NET leds<3> LOC="AD26"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors # leds<3>
NET leds<4> LOC="G16"; # Bank 3, Vcco=2.5V, No DCI # leds<4>
NET leds<5> LOC="AD25"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors # leds<5>
NET leds<6> LOC="AD24"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors # leds<6>
NET leds<7> LOC="AE24"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors # leds<7>
#
# Switches
#
# switches = GPIO_DIP_SW...
NET switches<0> LOC="U25"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors # switches<0>
NET switches<1> LOC="AG27"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors # switches<1>
NET switches<2> LOC="AF25"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors # switches<2>
NET switches<3> LOC="AF26"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors # switches<3>
NET switches<4> LOC="AE27"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors # switches<4>
NET switches<5> LOC="AE26"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors # switches<5>
NET switches<6> LOC="AC25"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors # switches<6>
NET switches<7> LOC="AC24"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors # switches<7>
#
# PS/2 KEYBOARD
#
NET ps2c LOC="T26"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors # ps2c
NET ps2d LOC="T25"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors # ps2d
#
# UART
#
NET rxd LOC="AG15"; # Bank 4, Vcco=3.3V, No DCI # rxd
NET txd LOC="AG20"; # Bank 4, Vcco=3.3V, No DCI # txd
#
# VDU
#
NET red LOC="AG23"; # Bank 2, Vcco=3.3V # red=GPIO_LED_E
NET green LOC="AF13"; # Bank 2, Vcco=3.3V # green=GPIO_LED_N
NET blue LOC="E8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors # blue=GPIO_LED_C
NET hs LOC="AG12"; # Bank 2, Vcco=3.3V # hs=GPIO_LED_S
NET vs LOC="AF23"; # Bank 2, Vcco=3.3V # vs=GPIO_LED_W
#
# 7 SEGMENT DISPLAY
#
#
# RAM Address bus
#
#NET SRAM_FLASH_A0 LOC="K12"; # Bank 1, Vcco=3.3V # ram_addr<0>
#NET SRAM_FLASH_A1 LOC="K13"; # Bank 1, Vcco=3.3V # ram_addr<1>
#NET SRAM_FLASH_A2 LOC="H23"; # Bank 1, Vcco=3.3V # ram_addr<2>
#NET SRAM_FLASH_A3 LOC="G23"; # Bank 1, Vcco=3.3V # ram_addr<3>
#NET SRAM_FLASH_A4 LOC="H12"; # Bank 1, Vcco=3.3V # ram_addr<4>
#NET SRAM_FLASH_A5 LOC="J12"; # Bank 1, Vcco=3.3V # ram_addr<5>
#NET SRAM_FLASH_A6 LOC="K22"; # Bank 1, Vcco=3.3V # ram_addr<6>
#NET SRAM_FLASH_A7 LOC="K23"; # Bank 1, Vcco=3.3V # ram_addr<7>
#NET SRAM_FLASH_A8 LOC="K14"; # Bank 1, Vcco=3.3V # ram_addr<8>
#NET SRAM_FLASH_A9 LOC="L14"; # Bank 1, Vcco=3.3V # ram_addr<9>
#NET SRAM_FLASH_A10 LOC="H22"; # Bank 1, Vcco=3.3V # ram_addr<10>
#NET SRAM_FLASH_A11 LOC="G22"; # Bank 1, Vcco=3.3V # ram_addr<11>
#NET SRAM_FLASH_A12 LOC="J15"; # Bank 1, Vcco=3.3V # ram_addr<12>
#NET SRAM_FLASH_A13 LOC="K16"; # Bank 1, Vcco=3.3V # ram_addr<13>
#NET SRAM_FLASH_A14 LOC="K21"; # Bank 1, Vcco=3.3V # ram_addr<14>
#NET SRAM_FLASH_A15 LOC="J22"; # Bank 1, Vcco=3.3V # ram_addr<15>
#NET SRAM_FLASH_A16 LOC="L16"; # Bank 1, Vcco=3.3V # ram_addr<16>
#NET SRAM_FLASH_A17 LOC="L15"; # Bank 1, Vcco=3.3V # ram_addr<17>
#NET SRAM_FLASH_A18 LOC="L20"; # Bank 1, Vcco=3.3V # ram_addr<18> <= GND
#NET SRAM_FLASH_A19 LOC="L21"; # Bank 1, Vcco=3.3V # ram_addr<19> <= GND
#NET SRAM_FLASH_A20 LOC="AE23"; # Bank 2, Vcco=3.3V # ram_addr<20> <= GND
#NET SRAM_FLASH_A21 LOC="AE22"; # Bank 2, Vcco=3.3V # ram_addr<21> <= GND
#NET SRAM_FLASH_WE_B LOC="AF20"; # Bank 2, Vcco=3.3V # ram_wen
#NET SRAM_OE_B LOC="B12"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors # ram_oen
#
# RAM1
#
#NET SRAM_FLASH_D0 LOC="AD19"; # Bank 2, Vcco=3.3V # ram1_data<0>
#NET SRAM_FLASH_D1 LOC="AE19"; # Bank 2, Vcco=3.3V # ram1_data<1>
#NET SRAM_FLASH_D2 LOC="AE17"; # Bank 2, Vcco=3.3V # ram1_data<2>
#NET SRAM_FLASH_D3 LOC="AF16"; # Bank 2, Vcco=3.3V #
#NET SRAM_FLASH_D4 LOC="AD20"; # Bank 2, Vcco=3.3V #
#NET SRAM_FLASH_D5 LOC="AE21"; # Bank 2, Vcco=3.3V #
#NET SRAM_FLASH_D6 LOC="AE16"; # Bank 2, Vcco=3.3V #
#NET SRAM_FLASH_D7 LOC="AF15"; # Bank 2, Vcco=3.3V #
#NET SRAM_FLASH_D8 LOC="AH13"; # Bank 4, Vcco=3.3V, No DCI #
#NET SRAM_FLASH_D9 LOC="AH14"; # Bank 4, Vcco=3.3V, No DCI #
#NET SRAM_FLASH_D10 LOC="AH19"; # Bank 4, Vcco=3.3V, No DCI #
#NET SRAM_FLASH_D11 LOC="AH20"; # Bank 4, Vcco=3.3V, No DCI #
#NET SRAM_FLASH_D12 LOC="AG13"; # Bank 4, Vcco=3.3V, No DCI #
#NET SRAM_FLASH_D13 LOC="AH12"; # Bank 4, Vcco=3.3V, No DCI #
#NET SRAM_FLASH_D14 LOC="AH22"; # Bank 4, Vcco=3.3V, No DCI #
#NET SRAM_FLASH_D15 LOC="AG22"; # Bank 4, Vcco=3.3V, No DCI #
#
# Timing Constraints
#
NET "sys_clk" TNM_NET="sys_clk";
TIMESPEC "TS_clk"=PERIOD "sys_clk" 10 ns HIGH 50 %;
#NET SRAM_ADV_LD_B LOC="H8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_BW0 LOC="D10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_BW1 LOC="D11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_BW2 LOC="J11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_BW3 LOC="K11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_CLK LOC="AG21"; # Bank 4, Vcco=3.3V, No DCI
#NET SRAM_CLK LOC="G8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_CS_B LOC="J10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D16 LOC="N10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D17 LOC="E13"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D18 LOC="E12"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D19 LOC="L9"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D20 LOC="M10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D21 LOC="E11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D22 LOC="F11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D23 LOC="L8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D24 LOC="M8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D25 LOC="G12"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D26 LOC="G11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D27 LOC="C13"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D28 LOC="B13"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D29 LOC="K9"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D30 LOC="K8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_D31 LOC="J9"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_DQP0 LOC="D12"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_DQP1 LOC="C12"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_DQP2 LOC="H10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_DQP3 LOC="H9"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_FLASH_A0 LOC="K12"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A1 LOC="K13"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A2 LOC="H23"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A3 LOC="G23"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A4 LOC="H12"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A5 LOC="J12"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A6 LOC="K22"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A7 LOC="K23"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A8 LOC="K14"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A9 LOC="L14"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A10 LOC="H22"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A11 LOC="G22"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A12 LOC="J15"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A13 LOC="K16"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A14 LOC="K21"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A15 LOC="J22"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A16 LOC="L16"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A17 LOC="L15"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A18 LOC="L20"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A19 LOC="L21"; # Bank 1, Vcco=3.3V
#NET SRAM_FLASH_A20 LOC="AE23"; # Bank 2, Vcco=3.3V
#NET SRAM_FLASH_A21 LOC="AE22"; # Bank 2, Vcco=3.3V
#NET SRAM_FLASH_D0 LOC="AD19"; # Bank 2, Vcco=3.3V
#NET SRAM_FLASH_D1 LOC="AE19"; # Bank 2, Vcco=3.3V
#NET SRAM_FLASH_D2 LOC="AE17"; # Bank 2, Vcco=3.3V
#NET SRAM_FLASH_D3 LOC="AF16"; # Bank 2, Vcco=3.3V
#NET SRAM_FLASH_D4 LOC="AD20"; # Bank 2, Vcco=3.3V
#NET SRAM_FLASH_D5 LOC="AE21"; # Bank 2, Vcco=3.3V
#NET SRAM_FLASH_D6 LOC="AE16"; # Bank 2, Vcco=3.3V
#NET SRAM_FLASH_D7 LOC="AF15"; # Bank 2, Vcco=3.3V
#NET SRAM_FLASH_D8 LOC="AH13"; # Bank 4, Vcco=3.3V, No DCI
#NET SRAM_FLASH_D9 LOC="AH14"; # Bank 4, Vcco=3.3V, No DCI
#NET SRAM_FLASH_D10 LOC="AH19"; # Bank 4, Vcco=3.3V, No DCI
#NET SRAM_FLASH_D11 LOC="AH20"; # Bank 4, Vcco=3.3V, No DCI
#NET SRAM_FLASH_D12 LOC="AG13"; # Bank 4, Vcco=3.3V, No DCI
#NET SRAM_FLASH_D13 LOC="AH12"; # Bank 4, Vcco=3.3V, No DCI
#NET SRAM_FLASH_D14 LOC="AH22"; # Bank 4, Vcco=3.3V, No DCI
#NET SRAM_FLASH_D15 LOC="AG22"; # Bank 4, Vcco=3.3V, No DCI
#NET SRAM_FLASH_WE_B LOC="AF20"; # Bank 2, Vcco=3.3V
#NET SRAM_MODE LOC="A13"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
#NET SRAM_OE_B LOC="B12"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
Go to most recent revision | Compare with Previous | Blame | View Log