URL
https://opencores.org/ocsvn/System09/System09/trunk
Subversion Repositories System09
[/] [System09/] [trunk/] [src/] [Flex9/] [f9-dkide.asm] - Rev 159
Go to most recent revision | Compare with Previous | Blame | View Log
*
** FLEX 9 COMPACT FLASH / IDE DISK DRIVERS
*
* FOR SYS09BUG ON THE XESS XSA-3S1000 & XST3.0
* WITH I/O MAPPED AT $XE000
* AND ROM MAPPED AT $XF000
*
* These drivers should work with either
* an IDE disk drive or a IDE CF adapter card
* It uses 16 bit transfer mode,
* as some IDE drives do not support
* the set feature command found on CF cards
* that allows for 8 bit operation
*
*
IMASK EQU $10 IRQ MASK CC
FMASK EQU $40 FIRQ MASK CC
*
CF_BASE EQU $E100
CF_DATA EQU CF_BASE+0
CF_ERROR EQU CF_BASE+2 ; read error
CF_FEATURE EQU CF_BASE+2 ; write feature
CF_SECCNT EQU CF_BASE+4
CF_SECNUM EQU CF_BASE+6
CF_CYLLO EQU CF_BASE+8
CF_CYLHI EQU CF_BASE+10
CF_HEAD EQU CF_BASE+12
CF_STATUS EQU CF_BASE+14 ; read status
CF_COMAND EQU CF_BASE+14 ; write command
CF_AUX EQU CF_BASE+30 ; Reset register
*
* Command Equates
*
CMDREAD EQU $20 ; Read Single sector
CMDWRITE EQU $30 ; Write Single sector
AUXRESET EQU $06
AUXRSTREL EQU $02
HEADLBA EQU $E0
*
* Status bit equates
*
BSY EQU $80
DRDY EQU $40
DRQ EQU $08
ERR EQU $01
ORG $DE00
*
* DISK DRIVER JUMP TABLE
*
READ JMP READSC
WRITE JMP WRITSC
VERIFY JMP BUSY
RESTOR JMP RESTR1
DRIVE JMP DRVSEL
DRVRDY JMP CHKDRV
QUICK JMP CHKDRV
COLDDR JMP INITDR
WARMDR JMP WARMD1
SEEK JMP SEEKTS
*
* RAM SPACE
*
DRVNUM FCB 0
*
*
* INITIALIZE CF CARD
*
INITDR LDD #AUXRESET
STD CF_AUX
LDD #AUXRSTREL
STD CF_AUX
LDD #HEADLBA
STD CF_HEAD
BRA WAITRDY
*
* RESTORE DISK DRIVER (SEEK TRACK 00)
*
RESTR1 BSR DRVSEL
CLRA ; Track 0
LDB #$01 ; Sector 1
*
* Seek track and sector
* A holds track number (0 - ??)
* B holds sector number (1 - ??)
* Sector numbers starts from 1
* subtract 1 to start from sector 0 on CF
*
SEEKTS DECB
PSHS A
CLRA
STD CF_SECNUM
LDB ,S
STD CF_CYLLO
LDB DRVNUM
STD CF_CYLHI
LDB #$01
STD CF_SECCNT
PULS A
CLRB
WARMD1 RTS
*
* READ SECTORS FROM CF
*
*
READSC BSR SEEKTS
LDD #CMDREAD ; IDE READ MULTIPLE
STD CF_COMAND
BSR WAITRDY
*
* READ LOOP
*
PSHS Y
LDY #256
RDLP1 BSR WAITDRQ
LDD CF_DATA
STB ,X+
LEAY -1,Y
BNE RDLP1
PULS Y
*
BSR WAITRDY
CLRB
RTS
*
* WRITE SECTOR TO CF
*
WRITSC BSR SEEKTS ; SEEK TRACK & SECTOR
LDD #CMDWRITE; IDE WRITE MULTIPLE
STD CF_COMAND
BSR WAITRDY
*
* WRITE LOOP
*
PSHS Y
LDY #256
CLRA
WRTLP1 BSR WAITDRQ
LDB ,X+
STD CF_DATA
LEAY -1,Y
BNE WRTLP1
PULS Y
*
BSR WAITRDY
CLRB
RTS
*
* CHECK FOR BUSY
* Doubles as VERIFY
*
BUSY CLRB Never busy
RTS
*
* DRIVE SELECT DISK DRIVER
*
DRVSEL LDA 3,X GET DRIVE # FROM FCB
CMPA #3
BLS DRVS2 IF > 3, SET IT TO 0
CLRA
DRVS2 STA DRVNUM
CLRB ; SET Z, CLEAR C
RTS
*
* CHECK DRIVE READY DISK DRIVER
*
CHKDRV LDA 3,X
CLRB ; CLEAR C, SET Z
RTS
*
* WAIT UNTIL READY
*
WAITRDY LDD CF_STATUS
BITB #BSY
BNE WAITRDY
LDD CF_STATUS
BITB #DRDY
BEQ WAITRDY
RTS
*
* WAIT FOR DATA REQUEST
*
WAITDRQ LDD CF_STATUS
BITB #DRQ
BEQ WAITDRQ
RTS
*
END
Go to most recent revision | Compare with Previous | Blame | View Log