URL
https://opencores.org/ocsvn/a-z80/a-z80/trunk
Subversion Repositories a-z80
[/] [a-z80/] [trunk/] [host/] [basic_nexys3/] [Nexys3_master.ucf] - Rev 16
Go to most recent revision | Compare with Previous | Blame | View Log
## This file is a general .ucf for Nexys3 rev B board## To use it in a project:## - remove or comment the lines corresponding to unused pins## - rename the used signals according to the project## Clock signalNET "CLOCK_100" LOC = "V10" | IOSTANDARD = "LVCMOS33"; #Bank = 2, pin name = IO_L30N_GCLK0_USERCCLK, Sch name = GCLK#Net "clk" TNM_NET = sys_clk_pin;#TIMESPEC TS_sys_clk_pin = PERIOD sys_clk_pin 100000 kHz;NET "KEY0" CLOCK_DEDICATED_ROUTE = FALSE;NET "KEY1" CLOCK_DEDICATED_ROUTE = FALSE;NET "KEY2" CLOCK_DEDICATED_ROUTE = FALSE;PIN "KEY2_BUFGP/BUFG.O" CLOCK_DEDICATED_ROUTE = FALSE;## onBoard USB controller## NOTE: DEPP and DSTM net names use some of the same pins, if trying to use both DEPP and DSTM use a signle net name for each shared pin.## Data bus for both the DEPP and DSTM interfaces uncomment lines 15-22 if using either one#NET "DB<0>" LOC = "E1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L50N_M3BA2, Sch name = U-FD0#NET "DB<1>" LOC = "F4" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L51P_M3A10, Sch name = U-FD1#NET "DB<2>" LOC = "F3" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L51N_M3A4, Sch name = U-FD2#NET "DB<3>" LOC = "D2" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L52P_M3A8, Sch name = U-FD3#NET "DB<4>" LOC = "D1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L52N_M3A9, Sch name = U-FD4#NET "DB<5>" LOC = "H7" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L53P_M3CKE, Sch name = U-FD5#NET "DB<6>" LOC = "G6" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L53N_M3A12, Sch name = U-FD6#NET "DB<7>" LOC = "E4" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L54P_M3RESET, Sch name = U-FD7## If using the DEPP interface uncomment lines 25-28#NET "EppWRITE" LOC = "F5" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L55N_M3A14, Sch name = U-FLAGC#NET "EppASTB" LOC = "H1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L41N_GCLK26_M3DQ5, Sch name = U-FLAGA#NET "EppDSTB" LOC = "K4" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L42P_GCLK25_TRDY2_M3UDM, Sch name = U-FLAGB#NET "EppWAIT" LOC = "C2" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L83P, Sch name = U-SLRD## If using the DSTM interface uncomment lines 31-40#NET "DstmIFCLK" LOC = "H2" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L41P_GCLK27_M3DQ4, Sch name = U-IFCLK#NET "DstmSLCS" LOC = "F6" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L55P_M3A13, Sch name = U-SLCS#NET "DstmFLAGA" LOC = "H1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L41N_GCLK26_M3DQ5, Sch name = U-FLAGA#NET "DstmFLAGB" LOC = "K4" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L42P_GCLK25_TRDY2_M3UDM, Sch name = U-FLAGB#NET "DstmADR<0>" LOC = "H5" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L49N_M3A2, Sch name = U-FIFOAD0#NET "DstmADR<1>" LOC = "E3" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L50P_M3WE, Sch name = U-FIFOAD1#Net "DstmSLRD" LOC = "C2" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L83P, Sch name = U-SLRD#NET "DstmSLWR" LOC = "C1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L83N_VREF, Sch name = U-SLWR#NET "DstmSLOE" LOC = "H6" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L49P_M3A7, Sch name = U-SLOE#NET "DstmPKTEND" LOC = "D3" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L54N_M3A11, Sch name = U-PKTEND#NET "UsbMode" LOC = "F1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L48N_M3BA1, Sch name = U-INT0### onBoard Cellular RAM, Numonyx StrataFlash and Numonyx Quad Flash#NET "MemOE" LOC = "L18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L46N_FOE_B_M1DQ3, Sch name = P30-OE#NET "MemWR" LOC = "M16" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L47P_FWE_B_M1DQ0, Sch name = P30-WE#NET "RamAdv" LOC = "H18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L43N_GCLK4_M1DQ5, Sch name = P30-ADV#NET "RamCS" LOC = "L15" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L42P_GCLK7_M1UDM, Sch name = MT-CE#NET "RamClk" LOC = "R10" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L29P_GCLK3, Sch name = P30-CLK#NET "RamCRE" LOC = "M18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L47N_LDC_M1DQ1, Sch name = MT-CRE#NET "RamLB" LOC = "K16" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L41N_GCLK8_M1CASN, Sch name = MT-LB#NET "RamUB" LOC = "K15" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L41P_GCLK9_IRDY1_M1RASN, Sch name = MT-UB#NET "RamWait" LOC = "V4" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L63N, Sch name = P30-WAIT#NET "FlashRp" LOC = "T4" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L63P, Sch name = P30-RST#NET "FlashCS" LOC = "L17" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L46P_FCS_B_M1DQ2, Sch name = P30-CE#NET "QuadSpiFlashCS" LOC="V3" | IOSTANDARD = "LVCMOS33"; #Bank = MISC, Pin name = IO_L65N_CSO_B_2, Sch name = CS#NET "QuadSpiFlashSck" LOC="R15" | IOSTANDARD = "LVCMOS33"; #Bank = MISC, Pin name = IO_L1P_CCLK_2, Sch name = SCK#NET "QuadSpiFlashDB<0>" LOC="T13" | IOSTANDARD = "LVCMOS33"; #Dual/Quad SPI Flash DB<0>, Bank = MISC, Pin name = IO_L3N_MOSI_CSI_B_MISO0_2, Sch name = SDI#NET "MemAdr<1>" LOC = "K18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L45N_A0_M1LDQSN, Sch name = P30-A0#NET "MemAdr<2>" LOC = "K17" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L45P_A1_M1LDQS, Sch name = P30-A1#NET "MemAdr<3>" LOC = "J18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L44N_A2_M1DQ7, Sch name = P30-A2#NET "MemAdr<4>" LOC = "J16" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L44P_A3_M1DQ6, Sch name = P30-A3#NET "MemAdr<5>" LOC = "G18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L38N_A4_M1CLKN, Sch name = P30-A4#NET "MemAdr<6>" LOC = "G16" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L38P_A5_M1CLK, Sch name = P30-A5#NET "MemAdr<7>" LOC = "H16" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L37N_A6_M1A1, Sch name = P30-A6#NET "MemAdr<8>" LOC = "H15" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L37P_A7_M1A0, Sch name = P30-A7#NET "MemAdr<9>" LOC = "H14" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L36N_A8_M1BA1, Sch name = P30-A8#NET "MemAdr<10>" LOC = "H13" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L36P_A9_M1BA0, Sch name = P30-A9#NET "MemAdr<11>" LOC = "F18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L35N_A10_M1A2, Sch name = P30-A10#NET "MemAdr<12>" LOC = "F17" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L35P_A11_M1A7, Sch name = P30-A11#NET "MemAdr<13>" LOC = "K13" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L34N_A12_M1BA2, Sch name = P30-A12#NET "MemAdr<14>" LOC = "K12" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L34P_A13_M1WE, Sch name = P30-A13#NET "MemAdr<15>" LOC = "E18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L33N_A14_M1A4, Sch name = P30-A14#NET "MemAdr<16>" LOC = "E16" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L33P_A15_M1A10, Sch name = P30-A15#NET "MemAdr<17>" LOC = "G13" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L32N_A16_M1A9, Sch name = P30-A16#NET "MemAdr<18>" LOC = "H12" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L32P_A17_M1A8, Sch name = P30-A17#NET "MemAdr<19>" LOC = "D18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L31N_A18_M1A12, Sch name = P30-A18#NET "MemAdr<20>" LOC = "D17" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L31P_A19_M1CKE, Sch name = P30-A19#NET "MemAdr<21>" LOC = "G14" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L30N_A20_M1A11, Sch name = P30-A20#NET "MemAdr<22>" LOC = "F14" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L30P_A21_M1RESET Sch name = P30-A21#NET "MemAdr<23>" LOC = "C18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L29N_A22_M1A14, Sch name = P30-A22#NET "MemAdr<24>" LOC = "C17" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L29P_A23_M1A13, Sch name = P30-A23#NET "MemAdr<25>" LOC = "F16" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L1N_A24_VREF, Sch name = P30-A24#NET "MemAdr<26>" LOC = "F15" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L1P_A25, Sch name = P30-A25#NET "MemDB<0>" LOC = "R13" | IOSTANDARD = "LVCMOS33"; #Ram or Numonyx Paralell Flash DB<0>, or Dual/Quad SPI Flash DB<1>, Bank = MISC, Pin name = IO_L3P_D0_DIN_MISO_MISO1_2, Sch name = P30-DQ0#NET "MemDB<1>" LOC = "T14" | IOSTANDARD = "LVCMOS33"; #Ram or Numonyx Paralell Flash DB<1>, or Quad SPI Flash DB<2>, Bank = MISC, Pin name = IO_L12P_D1_MISO2_2, Sch name = P30-DQ1#NET "MemDB<2>" LOC = "V14" | IOSTANDARD = "LVCMOS33"; #Ram or Numonyx Paralell Flash DB<2>, or Quad SPI Flash DB<3>, Bank = MISC, Pin name = IO_L12N_D2_MISO3_2, Sch name = P30-DQ2#NET "MemDB<3>" LOC = "U5" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_49P_D3, Sch name = P30-DQ3#NET "MemDB<4>" LOC = "V5" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_49N_D4, Sch name = P30-DQ4#NET "MemDB<5>" LOC = "R3" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L62P_D5, Sch name = P30-DQ5#NET "MemDB<6>" LOC = "T3" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L62N_D6, Sch name = P30-DQ6#NET "MemDB<7>" LOC = "R5" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L48P_D7, Sch name = P30-DQ7#NET "MemDB<8>" LOC = "N5" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L64P_D8, Sch name = P30-DQ8#NET "MemDB<9>" LOC = "P6" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L64N_D9, Sch name = P30-DQ9#NET "MemDB<10>" LOC = "P12" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L13N_D10, Sch name = P30-DQ10#NET "MemDB<11>" LOC = "U13" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L14P_D11, Sch name = P30-DQ11#NET "MemDB<12>" LOC = "V13" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L14N_D12, Sch name = P30-DQ12#NET "MemDB<13>" LOC = "U10" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L30P_GCLK1_D13, Sch name = P30-DQ13#NET "MemDB<14>" LOC = "R8" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L31P_GCLK31_D14, Sch name = P30-DQ14#NET "MemDB<15>" LOC = "T8" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L31N_GCLK30_D15, Sch name = P30-DQ15## 7 segment display#NET "seg<0>" LOC = "T17" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L51P_M1DQ12, Sch name = CA#NET "seg<1>" LOC = "T18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L51N_M1DQ13, Sch name = CB#NET "seg<2>" LOC = "U17" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L52P_M1DQ14, Sch name = CC#NET "seg<3>" LOC = "U18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L52N_M1DQ15, Sch name = CD#NET "seg<4>" LOC = "M14" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L53P, Sch name = CE#NET "seg<5>" LOC = "N14" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L53N_VREF, Sch name = CF#NET "seg<6>" LOC = "L14" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L61P, Sch name = CG#NET "seg<7>" LOC = "M13" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L61N, Sch name = DP#NET "an<0>" LOC = "N16" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L50N_M1UDQSN, Sch name = AN0#NET "an<1>" LOC = "N15" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L50P_M1UDQS, Sch name = AN1#NET "an<2>" LOC = "P18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L49N_M1DQ11, Sch name = AN2#NET "an<3>" LOC = "P17" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L49P_M1DQ10, Sch name = AN3## Leds#NET "Led<0>" LOC = "U16" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L2P_CMPCLK, Sch name = LD0#NET "Led<1>" LOC = "V16" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L2N_CMPMOSI, Sch name = LD1#NET "Led<2>" LOC = "U15" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L5P, Sch name = LD2#NET "Led<3>" LOC = "V15" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L5N, Sch name = LD3#NET "Led<4>" LOC = "M11" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L15P, Sch name = LD4#NET "Led<5>" LOC = "N11" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L15N, Sch name = LD5#NET "Led<6>" LOC = "R11" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L16P, Sch name = LD6#NET "Led<7>" LOC = "T11" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L16N_VREF, Sch name = LD7## Switches#NET "sw<0>" LOC = "T10" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L29N_GCLK2, Sch name = SW0#NET "sw<1>" LOC = "T9" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L32P_GCLK29, Sch name = SW1#NET "sw<2>" LOC = "V9" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L32N_GCLK28, Sch name = SW2#NET "sw<3>" LOC = "M8" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L40P, Sch name = SW3#NET "sw<4>" LOC = "N8" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L40N, Sch name = SW4#NET "sw<5>" LOC = "U8" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L41P, Sch name = SW5#NET "sw<6>" LOC = "V8" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L41N_VREF, Sch name = SW6#NET "sw<7>" LOC = "T5" | IOSTANDARD = "LVCMOS33"; #Bank = MISC, Pin name = IO_L48N_RDWR_B_VREF_2, Sch name = SW7## ButtonsNET "KEY0" LOC = "B8" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L33P, Sch name = BTNSNET "KEY1" LOC = "A8" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L33N, Sch name = BTNUNET "KEY2" LOC = "C4" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L1N_VREF, Sch name = BTNL#NET "btn<3>" LOC = "C9" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L34N_GCLK18, Sch name = BTND#NET "btn<4>" LOC = "D9" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L34P_GCLK19, Sch name = BTNR## VGA Connector#NET "vgaRed<0>" LOC = "U7" | IOSTANDARD = "LVCMOS33"; # Bank = 2, Pin name = IO_L43P, Sch name = RED0#NET "vgaRed<1>" LOC = "V7" | IOSTANDARD = "LVCMOS33"; # Bank = 2, Pin name = IO_L43N, Sch name = RED1#NET "vgaRed<2>" LOC = "N7" | IOSTANDARD = "LVCMOS33"; # Bank = 2, Pin name = IO_L44P, Sch name = RED2#NET "vgaGreen<0>" LOC = "P8" | IOSTANDARD = "LVCMOS33"; # Bank = 2, Pin name = IO_L44N, Sch name = GRN0#NET "vgaGreen<1>" LOC = "T6" | IOSTANDARD = "LVCMOS33"; # Bank = 2, Pin name = IO_L45P, Sch name = GRN1#NET "vgaGreen<2>" LOC = "V6" | IOSTANDARD = "LVCMOS33"; # Bank = 2, Pin name = IO_L45N, Sch name = GRN2#NET "vgaBlue<1>" LOC = "R7" | IOSTANDARD = "LVCMOS33"; # Bank = 2, Pin name = IO_L46P, Sch name = BLU1#NET "vgaBlue<2>" LOC = "T7" | IOSTANDARD = "LVCMOS33"; # Bank = 2, Pin name = IO_L46N, Sch name = BLU2#NET "Hsync" LOC = "N6" | IOSTANDARD = "LVCMOS33"; # Bank = 2, Pin name = IO_L47P, Sch name = HSYNC#NET "Vsync" LOC = "P7" | IOSTANDARD = "LVCMOS33"; # Bank = 2, Pin name = IO_L47N, Sch name = VSYNC## 12 pin connectors##JANET "GPIO_0<0>" LOC = "T12" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L19P, Sch name = JA1NET "GPIO_0<1>" LOC = "V12" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L19N, Sch name = JA2NET "GPIO_0<2>" LOC = "N10" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L20P, Sch name = JA3NET "GPIO_0<3>" LOC = "P11" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L20N, Sch name = JA4NET "GPIO_0<4>" LOC = "M10" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L22P, Sch name = JA7NET "GPIO_0<5>" LOC = "N9" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L22N, Sch name = JA8NET "GPIO_0<6>" LOC = "U11" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L23P, Sch name = JA9NET "GPIO_0<7>" LOC = "V11" | IOSTANDARD = "LVCMOS33"; #Bank = 2, Pin name = IO_L23N, Sch name = JA10##JBNET "GPIO_1<0>" LOC = "K2" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L38P_M3DQ2, Sch name = JB1NET "GPIO_1<1>" LOC = "K1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L38N_M3DQ3, Sch name = JB2NET "GPIO_1<2>" LOC = "L4" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L39P_M3LDQS, Sch name = JB3NET "GPIO_1<3>" LOC = "L3" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L39N_M3LDQSN, Sch name = JB4NET "GPIO_1<4>" LOC = "J3" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L40P_M3DQ6, Sch name = JB7NET "GPIO_1<5>" LOC = "J1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L40N_M3DQ7, Sch name = JB8NET "GPIO_1<6>" LOC = "K3" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L42N_GCLK24_M3LDM, Sch name = JB9NET "GPIO_1<7>" LOC = "K5" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L43N_GCLK22_IRDY2_M3CASN, Sch name = JB10##JCNET "GPIO_2<0>" LOC = "H3" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L44N_GCLK20_M3A6, Sch name = JC1NET "GPIO_2<1>" LOC = "L7" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L45P_M3A3, Sch name = JC2NET "GPIO_2<2>" LOC = "K6" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L45N_M3ODT, Sch name = JC3NET "GPIO_2<3>" LOC = "G3" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L46P_M3CLK, Sch name = JC4NET "GPIO_2<4>" LOC = "G1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L46N_M3CLKN, Sch name = JC7NET "GPIO_2<5>" LOC = "J7" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L47P_M3A0, Sch name = JC8NET "GPIO_2<6>" LOC = "J6" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L47N_M3A1, Sch name = JC9NET "GPIO_2<7>" LOC = "F2" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L48P_M3BA0, Sch name = JC10##JD, LX16 Die onlyNET "GPIO_3<0>" LOC = "G11" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L40P, Sch name = JD1NET "GPIO_3<1>" LOC = "F10" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L40N, Sch name = JD2NET "GPIO_3<2>" LOC = "F11" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L42P, Sch name = JD3NET "GPIO_3<3>" LOC = "E11" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L42N, Sch name = JD4NET "GPIO_3<4>" LOC = "D12" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L47P, Sch name = JD7NET "GPIO_3<5>" LOC = "C12" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L47N, Sch name = JD8NET "GPIO_3<6>" LOC = "F12" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L51P, Sch name = JD9NET "GPIO_3<7>" LOC = "E12" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L51N, Sch name = JD10## SMSC ethernet PHY#NET "PhyRstn" LOC = "P3" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L2N, Sch name = ETH-RST#NET "PhyCrs" LOC = "N3" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L1N_VREF, Sch name = ETH-CRS#NET "PhyCol" LOC = "P4" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L2P, Sch name = ETH-COL#NET "PhyClk25Mhz" LOC = "N4" | IOSTANDARD = "LVCMOS33"; #Unconnected if R172 is not loaded, Bank = 3, Pin name = IO_L1P, Sch name = ETH-CLK25MHZ#NET "PhyTxd<3>" LOC = "T1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L33N_M3DQ13, Sch name = ETH-TXD3#NET "PhyTxd<2>" LOC = "T2" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L33P_M3DQ12, Sch name = ETH-TXD2#NET "PhyTxd<1>" LOC = "U1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L32N_M3DQ15, Sch name = ETH-TXD1#NET "PhyTxd<0>" LOC = "U2" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L32P_M3DQ14, Sch name = ETH-TXD0#NET "PhyTxEn" LOC = "L2" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L37P_M3DQ0, Sch name = ETH-TX_EN#NET "PhyTxClk" LOC = "L5" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L43P_GCLK23_M3RASN, Sch name = ETH-TX_CLK#NET "PhyTxEr" LOC = "P2" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L34P_M3UDQS, Sch name = ETH-TXD4#NET "PhyRxd<3>" LOC = "M3" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L36P_M3DQ8, Sch name = ETH-RXD3#NET "PhyRxd<2>" LOC = "N1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L35N_M3DQ11, Sch name = ETH-RXD2#NET "PhyRxd<1>" LOC = "N2" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L35P_M3DQ10, Sch name = ETH-RXD1#NET "PhyRxd<0>" LOC = "P1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L34N_M3UDQSN, Sch name = ETH-RXD0#NET "PhyRxDv" LOC = "L1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L37N_M3DQ1, Sch name = ETH-RX_DV#NET "PhyRxEr" LOC = "M1" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L36N_M3DQ9, Sch name = ETH-RXD4#NET "PhyRxClk" LOC = "H4" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L44P_GCLK21_M3A5, Sch name = ETH-RX_CLK#NET "PhyMdc" LOC = "M5" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L31N_VREF, Sch name = ETH-MDC#NET "PhyMdio" LOC = "L6" | IOSTANDARD = "LVCMOS33"; #Bank = 3, Pin name = IO_L31P, Sch name = ETH-MDIO## Pic USB-HID interface#NET "PS2KeyboardData" LOC = "J13" | IOSTANDARD = "LVCMOS33" | PULLUP; #Bank = 1, Pin name = IO_L39P_M1A3, Sch name = PIC-SDI1#NET "PS2KeyboardClk" LOC = "L12" | IOSTANDARD = "LVCMOS33" | PULLUP; #Bank = 1, Pin name = IO_L40P_GCLK11_M1A5, Sch name = PIC-SCK1#NET "PS2MouseData" LOC = "K14" | IOSTANDARD = "LVCMOS33" | PULLUP; #Bank = 1, Pin name = IO_L39N_M1ODT, Sch name = PIC-SDO1#NET "PS2MouseClk" LOC = "L13" | IOSTANDARD = "LVCMOS33" | PULLUP; #Bank = 1, Pin name = IO_L40N_GCLK10_M1A6, Sch name = PIC-SS1#NET "PicGpio<0>" LOC = "L16" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L42N_GCLK6_TRDY1_M1LDM, Sch name = PIC-GPIO0#NET "PicGpio<1>" LOC = "H17" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L43P_GCLK5_M1DQ4, Sch name = PIC-GPIO1## Usb-RS232 interface#NET "RsRx" LOC = "N17" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L48P_HDC_M1DQ8, Sch name = MCU-RXNET "UART_TXD" LOC = "N18" | IOSTANDARD = "LVCMOS33"; #Bank = 1, Pin name = IO_L48N_M1DQ9, Sch name = MCU-TX## VHDCI Connector#NET "EXP-IO_P<0>" LOC = "B2" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L2P, Sch name = EXP_IO1_P#NET "EXP-IO_N<0>" LOC = "A2" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L2N, Sch name = EXP_IO1_N#NET "EXP-IO_P<1>" LOC = "D6" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L3P, Sch name = EXP_IO2_P#NET "EXP-IO_N<1>" LOC = "C6" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L3N, Sch name = EXP_IO2_N#NET "EXP-IO_P<2>" LOC = "B3" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L4P, Sch name = EXP_IO3_P#NET "EXP-IO_N<2>" LOC = "A3" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L4N, Sch name = EXP_IO3_N#NET "EXP-IO_P<3>" LOC = "B4" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L5P, Sch name = EXP_IO4_P#NET "EXP-IO_N<3>" LOC = "A4" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L5N, Sch name = EXP_IO4_N#NET "EXP-IO_P<4>" LOC = "C5" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L6P, Sch name = EXP_IO5_P#NET "EXP-IO_N<4>" LOC = "A5" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L6N, Sch name = EXP_IO5_N#NET "EXP-IO_P<5>" LOC = "B6" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L8P, Sch name = EXP_IO6_P#NET "EXP-IO_N<5>" LOC = "A6" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L8N_VREF, Sch name = EXP_IO6_N#NET "EXP-IO_P<6>" LOC = "C7" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L10P, Sch name = EXP_IO7_P#NET "EXP-IO_N<6>" LOC = "A7" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L10N, Sch name = EXP_IO7_N#NET "EXP-IO_P<7>" LOC = "D8" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L11P, Sch name = EXP_IO8_P#NET "EXP-IO_N<7>" LOC = "C8" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L11N, Sch name = EXP_IO8_N#NET "EXP-IO_P<8>" LOC = "B9" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L35P_GCLK17, Sch name = EXP_IO9_P#NET "EXP-IO_N<8>" LOC = "A9" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L35N_GCLK16, Sch name = EXP_IO9_N#NET "EXP-IO_P<9>" LOC = "D11" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L36P_GCLK15, Sch name = EXP_IO10_P#NET "EXP-IO_N<9>" LOC = "C11" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L36N_GCLK14, Sch name = EXP_IO10_N#NET "EXP-IO_P<10>" LOC = "C10" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L37P_GCLK13, Sch name = EXP_IO11_P#NET "EXP-IO_N<10>" LOC = "A10" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L37N_GCLK12, Sch name = EXP_IO11_N#NET "EXP-IO_P<11>" LOC = "G9" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L38P, Sch name = EXP_IO12_P#NET "EXP-IO_N<11>" LOC = "F9" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L38N_VREF, Sch name = EXP_IO12_N#NET "EXP-IO_P<12>" LOC = "B11" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L39P, Sch name = EXP_IO13_P#NET "EXP-IO_N<12>" LOC = "A11" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L39N, Sch name = EXP_IO13_N#NET "EXP-IO_P<13>" LOC = "B12" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L41P, Sch name = EXP_IO14_P#NET "EXP-IO_N<13>" LOC = "A12" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L41N, Sch name = EXP_IO14_N#NET "EXP-IO_P<14>" LOC = "C13" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L50P, Sch name = EXP_IO15_P#NET "EXP-IO_N<14>" LOC = "A13" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L50N, Sch name = EXP_IO15_N#NET "EXP-IO_P<15>" LOC = "B14" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L62P, Sch name = EXP_IO16_P#NET "EXP-IO_N<15>" LOC = "A14" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L62N_VREF, Sch name = EXP_IO16_N#NET "EXP-IO_P<16>" LOC = "F13" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L63P_SCP7, Sch name = EXP_IO17_P#NET "EXP-IO_N<16>" LOC = "E13" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L63N_SCP6, Sch name = EXP_IO17_N#NET "EXP-IO_P<17>" LOC = "C15" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L64P_SCP5, Sch name = EXP_IO18_P#NET "EXP-IO_N<17>" LOC = "A15" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L64N_SCP4, Sch name = EXP_IO18_N#NET "EXP-IO_P<18>" LOC = "D14" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L65P_SCP3, Sch name = EXP_IO19_P#NET "EXP-IO_N<18>" LOC = "C14" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L65N_SCP2, Sch name = EXP_IO19_N#NET "EXP-IO_P<19>" LOC = "B16" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L66P_SCP1, Sch name = EXP_IO20_P#NET "EXP-IO_N<19>" LOC = "A16" | IOSTANDARD = "LVCMOS33"; #Bank = 0, Pin name = IO_L66N_SCP0, Sch name = EXP_IO20_N
Go to most recent revision | Compare with Previous | Blame | View Log