URL
https://opencores.org/ocsvn/a-z80/a-z80/trunk
Subversion Repositories a-z80
[/] [a-z80/] [trunk/] [tools/] [dongle/] [z80-instruction-run-ed.py] - Rev 3
Compare with Previous | Blame | View Log
#!/usr/bin/env python # # This script is used to dump Z80 instruction timing data by running the # instructions through the Arduino Z80 dongle and parsing the dump output. # It needs: # 1. Arduino Z80 dongle: http://www.baltazarstudios.com # 2. Instructions data file: '../../resources/opcodes-??.txt' # Needs pyserial from https://pypi.python.org/pypi/pyserial # import serial import sys ser = serial.Serial("\\.\COM9", 115200, timeout=1) # Flush the serial buffer, removes any command response def serialFlush(ser): while 1: indata = ser.readline().rstrip('\n') if not indata: break try: # Open opcode file and read opcode + mnemonics with open('../../resources/opcodes-ed.txt') as tmpFile: ops = [line.rstrip('\n') for line in tmpFile] serialFlush(ser) # Stop after the second M1 cycle effectively running only one instruction ser.write("s 4 3\r") serialFlush(ser) print ('<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">') print ('<HTML><HEAD><TITLE>Z80 Instructions Timing</TITLE></HEAD><BODY>') print ('<H1>Opcodes with ED prefix</H1>') for line in ops: print (line[0:2] + ' ' + line[2:4] + ' .. <A href=\"#' + line[2:4] + '\">' + line[12:] + '</A><BR>') print ('<H1>Instructions Timing</H1>') for line in ops: ram = ':10000000' + line[0:4] + '0102030405060708090A0B0C0D00' ser.write(ram + '\r') indata = ser.readline().rstrip('\n') ser.write('r\r') print ('<H3 id=\"' + line[2:4] + '\">Opcode: ' + line[0:2] + " " + line[2:8] + ' => ' + line[12:] + '</H3>') sys.stderr.write (line + '\n') # Skip initial response from Arduino, includes two empty cycles after the reset for x in range(1,7): indata = ser.readline() print ('<PRE>') while 1: indata = ser.readline() if not indata: break if indata[0]!=':': print (indata.rstrip('\r\n')) print ('</PRE>') print ('</BODY></HTML>') except KeyboardInterrupt: ser.close()