Subversion Repositories ac97

/////////////////////////////////////////////////////////////////////
////                                                             ////
////  WISHBONE AC 97 Controller                                  ////
////  PCM Request Controller                                     ////
////                                                             ////
////                                                             ////
////  Author: Rudolf Usselmann                                   ////
////          rudi@asics.ws                                      ////
////                                                             ////
////                                                             ////
////  Downloaded from: http://www.opencores.org/cores/ac97_ctrl/ ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
////                                                             ////
//// Copyright (C) 2000-2002 Rudolf Usselmann                    ////
////                         www.asics.ws                        ////
////                         rudi@asics.ws                       ////
////                                                             ////
//// This source file may be used and distributed without        ////
//// restriction provided that this copyright statement is not   ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer.////
////                                                             ////
////     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     ////
//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   ////
//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   ////
//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      ////
//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         ////
//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    ////
//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   ////
//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        ////
//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  ////
//// LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  ////
//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  ////
//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         ////
//// POSSIBILITY OF SUCH DAMAGE.                                 ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
 
//  CVS Log
//
//  $Id: ac97_prc.v,v 1.4 2002-09-19 06:30:56 rudi Exp $
//
//  $Date: 2002-09-19 06:30:56 $
//  $Revision: 1.4 $
//  $Author: rudi $
//  $Locker:  $
//  $State: Exp $
//
// Change History:
//               $Log: not supported by cvs2svn $
//               Revision 1.3  2002/03/05 04:44:05  rudi
//
//               - Fixed the order of the thrash hold bits to match the spec.
//               - Many minor synthesis cleanup items ...
//
//               Revision 1.2  2001/08/10 08:09:42  rudi
//
//               - Removed RTY_O output.
//               - Added Clock and Reset Inputs to documentation.
//               - Changed IO names to be more clear.
//               - Uniquifyed define names to be core specific.
//
//               Revision 1.1  2001/08/03 06:54:50  rudi
//
//
//               - Changed to new directory structure
//
//               Revision 1.1.1.1  2001/05/19 02:29:17  rudi
//               Initial Checkin
//
//
//
//
 
`include "ac97_defines.v"
 
module ac97_prc(clk, rst,
 
		// SR Slot Interface
		valid, in_valid, out_slt0,
		in_slt0, in_slt1,
 
		// Codec Register Access
		crac_valid, crac_wr,
 
		// Channel Configuration
		oc0_cfg, oc1_cfg, oc2_cfg, oc3_cfg, oc4_cfg, oc5_cfg,
		ic0_cfg, ic1_cfg, ic2_cfg,
 
		// FIFO Status
		o3_empty, o4_empty, o6_empty, o7_empty, o8_empty,
		o9_empty, i3_full, i4_full, i6_full,
 
		// FIFO Control
		o3_re, o4_re, o6_re, o7_re, o8_re, o9_re,
		i3_we, i4_we, i6_we
 
	);
input		clk, rst;
 
input		valid;
input	[2:0]	in_valid;
output	[15:0]	out_slt0;
input	[15:0]	in_slt0;
input	[19:0]	in_slt1;
 
input		crac_valid;
input		crac_wr;
 
input	[7:0]	oc0_cfg;
input	[7:0]	oc1_cfg;
input	[7:0]	oc2_cfg;
input	[7:0]	oc3_cfg;
input	[7:0]	oc4_cfg;
input	[7:0]	oc5_cfg;
 
input	[7:0]	ic0_cfg;
input	[7:0]	ic1_cfg;
input	[7:0]	ic2_cfg;
 
input		o3_empty;
input		o4_empty;
input		o6_empty;
input		o7_empty;
input		o8_empty;
input		o9_empty;
input		i3_full;
input		i4_full;
input		i6_full;
 
output		o3_re;
output		o4_re;
output		o6_re;
output		o7_re;
output		o8_re;
output		o9_re;
output		i3_we;
output		i4_we;
output		i6_we;
 
////////////////////////////////////////////////////////////////////
//
// Local Wires
//
 
wire		o3_re_l;
wire		o4_re_l;
wire		o6_re_l;
wire		o7_re_l;
wire		o8_re_l;
wire		o9_re_l;
 
reg		crac_valid_r;
reg		crac_wr_r;
 
////////////////////////////////////////////////////////////////////
//
// Output Tag Assembly
//
 
assign out_slt0[15] = |out_slt0[14:6];
 
assign out_slt0[14] = crac_valid_r;
assign out_slt0[13] = crac_wr_r;
 
assign out_slt0[12] = o3_re_l;
assign out_slt0[11] = o4_re_l;
assign out_slt0[10] = 1'b0;
assign out_slt0[09] = o6_re_l;
assign out_slt0[08] = o7_re_l;
assign out_slt0[07] = o8_re_l;
assign out_slt0[06] = o9_re_l;
assign out_slt0[5:0] = 6'h0;
 
////////////////////////////////////////////////////////////////////
//
// FIFO Control
//
 
always @(posedge clk)
	if(valid)	crac_valid_r <= #1 crac_valid;
 
always @(posedge clk)
	if(valid)	crac_wr_r <= #1 crac_valid & crac_wr;
 
// Output Channel 0 (Out Slot 3)
ac97_fifo_ctrl u0(
		.clk(		clk 		),
		.valid(		valid		),
		.ch_en(		oc0_cfg[0]	),
		.srs(		oc0_cfg[1]	),
		.full_empty(	o3_empty	),
		.req(		~in_slt1[11]	),
		.crdy(		in_slt0[15]	),
		.en_out(	o3_re		),
		.en_out_l(	o3_re_l		)
		);
 
// Output Channel 1 (Out Slot 4)
ac97_fifo_ctrl u1(
		.clk(		clk 		),
		.valid(		valid		),
		.ch_en(		oc1_cfg[0]	),
		.srs(		oc1_cfg[1]	),
		.full_empty(	o4_empty	),
		.req(		~in_slt1[10]	),
		.crdy(		in_slt0[15]	),
		.en_out(	o4_re		),
		.en_out_l(	o4_re_l		)
		);
 
`ifdef AC97_CENTER
// Output Channel 2 (Out Slot 6)
ac97_fifo_ctrl u2(
		.clk(		clk 		),
		.valid(		valid		),
		.ch_en(		oc2_cfg[0]	),
		.srs(		oc2_cfg[1]	),
		.full_empty(	o6_empty	),
		.req(		~in_slt1[8]	),
		.crdy(		in_slt0[15]	),
		.en_out(	o6_re		),
		.en_out_l(	o6_re_l		)
		);
`else
assign o6_re = 1'b0;
assign o6_re_l = 1'b0;
`endif
 
`ifdef AC97_SURROUND
// Output Channel 3 (Out Slot 7)
ac97_fifo_ctrl u3(
		.clk(		clk 		),
		.valid(		valid		),
		.ch_en(		oc3_cfg[0]	),
		.srs(		oc3_cfg[1]	),
		.full_empty(	o7_empty	),
		.req(		~in_slt1[7]	),
		.crdy(		in_slt0[15]	),
		.en_out(	o7_re		),
		.en_out_l(	o7_re_l		)
		);
 
// Output Channel 4 (Out Slot 8)
ac97_fifo_ctrl u4(
		.clk(		clk 		),
		.valid(		valid		),
		.ch_en(		oc4_cfg[0]	),
		.srs(		oc4_cfg[1]	),
		.full_empty(	o8_empty	),
		.req(		~in_slt1[6]	),
		.crdy(		in_slt0[15]	),
		.en_out(	o8_re		),
		.en_out_l(	o8_re_l		)
		);
`else
assign o7_re = 1'b0;
assign o7_re_l = 1'b0;
assign o8_re = 1'b0;
assign o8_re_l = 1'b0;
`endif
 
`ifdef AC97_LFE
// Output Channel 5 (Out Slot 9)
ac97_fifo_ctrl u5(
		.clk(		clk 		),
		.valid(		valid		),
		.ch_en(		oc5_cfg[0]	),
		.srs(		oc5_cfg[1]	),
		.full_empty(	o9_empty	),
		.req(		~in_slt1[5]	),
		.crdy(		in_slt0[15]	),
		.en_out(	o9_re		),
		.en_out_l(	o9_re_l		)
		);
`else
assign o9_re = 1'b0;
assign o9_re_l = 1'b0;
`endif
 
`ifdef AC97_SIN
// Input Channel 0 (In Slot 3)
ac97_fifo_ctrl u6(
		.clk(		clk 		),
		.valid(		in_valid[0]	),
		.ch_en(		ic0_cfg[0]	),
		.srs(		ic0_cfg[1]	),
		.full_empty(	i3_full		),
		.req(		in_slt0[12]	),
		.crdy(		in_slt0[15]	),
		.en_out(	i3_we		),
		.en_out_l(			)
		);
 
// Input Channel 1 (In Slot 4)
ac97_fifo_ctrl u7(
		.clk(		clk 		),
		.valid(		in_valid[1]	),
		.ch_en(		ic1_cfg[0]	),
		.srs(		ic1_cfg[1]	),
		.full_empty(	i4_full		),
		.req(		in_slt0[11]	),
		.crdy(		in_slt0[15]	),
		.en_out(	i4_we		),
		.en_out_l(			)
		);
`else
assign i3_we = 1'b0;
assign i4_we = 1'b0;
`endif
 
`ifdef AC97_MICIN
// Input Channel 2 (In Slot 6)
ac97_fifo_ctrl u8(
		.clk(		clk 		),
		.valid(		in_valid[2]	),
		.ch_en(		ic2_cfg[0]	),
		.srs(		ic2_cfg[1]	),
		.full_empty(	i6_full		),
		.req(		in_slt0[9]	),
		.crdy(		in_slt0[15]	),
		.en_out(	i6_we		),
		.en_out_l(			)
		);
`else
assign i6_we = 1'b0;
`endif
 
endmodule