URL
https://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk
Subversion Repositories adv_debug_sys
[/] [adv_debug_sys/] [tags/] [ADS_RELEASE_1_2_0/] [Hardware/] [adv_dbg_if/] [bench/] [README_testbench.txt] - Rev 8
Go to most recent revision | Compare with Previous | Blame | View Log
1README_testbench.txt
Advanced Debug Module (adv_dbg_if)
Nathan Yawn, nathan.yawn@opencores.org
Two testbenches are supplied with the advanced debug interface. The first
uses behavioral simulation of a wishbone bus with a memory attached, and
another behavioral simulatioin of an OR1200 CPU. This testbench performs
and tests bus / memory operations, and performs a few CPU operations, The
top-level module is in adv_dbg_tb.v. Other than the beavioral models, it
instantiates an adv_dbg_if (found in ../rtl/verilog/), and a JTAG TAP
("jtag" module, not included with this module). Note that the TAP
distributed by OpenCores will not work correctly; use the version modified
by Nathan Yawn.
The second testbench includes an actuall wishbone/OR1200 system. Its
top-level entity is xsv_fpga_top. It instantiates a wb_conbus, an OR1200,
an onchipram, a jtag TAP, and a UART16550, along with an adv_dbg_if. The
testbench is also instantiated here, and is used to drive the inputs to
the JTAG TAP. This testbench is less polished, but includes a functional
test of the single-step capability of the CPU.
Both testbenches were written for use in ModelSim (version 6.3). A
wave.do file is also included for each testbench, which will display a
useful collectino of signals in the ModelSim wave view.
Go to most recent revision | Compare with Previous | Blame | View Log