OpenCores
URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] [tests/] [uart_rx.S] - Rev 21

Go to most recent revision | Compare with Previous | Blame | View Log

/*****************************************************************
//                                                              //
//  Amber 2 System UART Test                                    //
//                                                              //
//  This file is part of the Amber project                      //
//  http://www.opencores.org/project,amber                      //
//                                                              //
//  Description                                                 //
//  Tests the UART receive function.                            //
//                                                              //
//  Author(s):                                                  //
//      - Conor Santifort, csantifort.amber@gmail.com           //
//                                                              //
//////////////////////////////////////////////////////////////////
//                                                              //
// Copyright (C) 2010 Authors and OPENCORES.ORG                 //
//                                                              //
// This source file may be used and distributed without         //
// restriction provided that this copyright statement is not    //
// removed from the file and that any derivative work contains  //
// the original copyright notice and the associated disclaimer. //
//                                                              //
// This source file is free software; you can redistribute it   //
// and/or modify it under the terms of the GNU Lesser General   //
// Public License as published by the Free Software Foundation; //
// either version 2.1 of the License, or (at your option) any   //
// later version.                                               //
//                                                              //
// This source is distributed in the hope that it will be       //
// useful, but WITHOUT ANY WARRANTY; without even the implied   //
// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      //
// PURPOSE.  See the GNU Lesser General Public License for more //
// details.                                                     //
//                                                              //
// You should have received a copy of the GNU Lesser General    //
// Public License along with this source; if not, download it   //
// from http://www.opencores.org/lgpl.shtml                     //
//                                                              //
*****************************************************************/

#include "amber_registers.h"

        .section .text
        .globl  main        
main:

        @ Configure the Amber UART to use the FIFO to receive
        ldr     r4, AdrUART0LCRH
        mov     r5, #0x10
        str     r5, [r4]
        
        
        @ Load some bytes into the testbench uart
        @ so it can transmit them to the Amber UART
        ldr     r4, AdrTEST_UART_TXD
        ldr     r5, =Message
        ldr     r9, =Message
        ldr     r7, =EndMessage
        ldr     r8, AdrTEST_UART_STATUS       
         
        @ transmit a byte from test uart
        ldrb    r6, [r5], #1
        str     r6, [r4]

        @ test_uart transmit enable
        ldr     r0, AdrTEST_UART_CONTROL
        mov     r1, #1
        str     r1, [r0]

main_loop:        
        @ wait if test_uart tx fifo full
1:      ldr     r0, [r8]
        ands    r0, r0, #2
        bne     1b

        @ transmit a byte from test uart
        ldrb    r6, [r5], #1
        str     r6, [r4]
        
        @ UART receive and transmit byte
        bl      uart_rx_check
        
        @ full message transmitted?
        cmp     r5, r7
        bne     main_loop


        @ while test_uart tx fifo empty == 0
2:      bl      uart_rx_check
        ldr     r0, [r8]
        ands    r0, r0, #1
        beq     2b

        @ wait until uart tx fifo empty == 1
        ldr     r3, AdrUART0FR @ flags
3:      ldr     r1, [r3]
        ands    r1, r1, #0x80
        beq     3b
        
        @ check the last few bytes received
        bl      uart_rx_check
                
@ ------------------------------------------        
@ ------------------------------------------        

        b       testpass



uart_rx_check:
        ldr     r2, AdrUART0DR @ rx/tx byte
        ldr     r3, AdrUART0FR @ flags

        @ if rx fifo empty flag == 1, return without doing anything
1:      ldr     r0, [r3]    
        ands    r0, r0, #0x10
        movne   pc, lr
        
        ldrb    r0, [r2]        @ uart rx byte
        ldrb    r1, [r9], #1    @ transmitted text
        cmp     r0, r1
        movne   r10, #20
        bne     testfail                
        
        @ check if there are more bytes in rx buffer
        b       1b


testfail:
        ldr     r11, AdrTEST_STATUS
        str     r10, [r11]
        b       testfail        
                
testpass:             
        ldr     r11, AdrTEST_STATUS
        mov     r10, #17
        str     r10, [r11]
        b       testpass
               

@ ------------------------------------------        
@ ------------------------------------------        

/* Write 17 to this address to generate a Test Passed message */
AdrTEST_STATUS:         .word  ADR_AMBER_TEST_STATUS    
AdrTEST_IRQ_TIMER:      .word  ADR_AMBER_TEST_IRQ_TIMER 
AdrTEST_RANDOM_NUM:     .word  ADR_AMBER_TEST_RANDOM_NUM
AdrTEST_UART_CONTROL:   .word  ADR_AMBER_TEST_UART_CONTROL     
AdrTEST_UART_STATUS:    .word  ADR_AMBER_TEST_UART_STATUS     
AdrTEST_UART_TXD:       .word  ADR_AMBER_TEST_UART_TXD  

AdrUART0LCRH:           .word  ADR_AMBER_UART0_LCRH
AdrUART0DR:             .word  ADR_AMBER_UART0_DR
AdrUART0FR:             .word  ADR_AMBER_UART0_FR

                        /* Include some non-characters in the string to test all 8 bits */
Message:                .word  0xa0ff810a
                        .ascii "\nThis message is brought to you by UART0\nIsnt that cool\nThats all folks\n"
EndMessage:             .word  0

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.