URL
https://opencores.org/ocsvn/amber/amber/trunk
Subversion Repositories amber
[/] [amber/] [trunk/] [hw/] [vlog/] [amber23/] [a23_execute.v] - Rev 26
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////// // // // Execute stage of Amber 2 Core // // // // This file is part of the Amber project // // http://www.opencores.org/project,amber // // // // Description // // Executes instructions. Instantiates the register file, ALU // // multiplication unit and barrel shifter. This stage is // // relitively simple. All the complex stuff is done in the // // decode stage. // // // // Author(s): // // - Conor Santifort, csantifort.amber@gmail.com // // // ////////////////////////////////////////////////////////////////// // // // Copyright (C) 2010 Authors and OPENCORES.ORG // // // // This source file may be used and distributed without // // restriction provided that this copyright statement is not // // removed from the file and that any derivative work contains // // the original copyright notice and the associated disclaimer. // // // // This source file is free software; you can redistribute it // // and/or modify it under the terms of the GNU Lesser General // // Public License as published by the Free Software Foundation; // // either version 2.1 of the License, or (at your option) any // // later version. // // // // This source is distributed in the hope that it will be // // useful, but WITHOUT ANY WARRANTY; without even the implied // // warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR // // PURPOSE. See the GNU Lesser General Public License for more // // details. // // // // You should have received a copy of the GNU Lesser General // // Public License along with this source; if not, download it // // from http://www.opencores.org/lgpl.shtml // // // ////////////////////////////////////////////////////////////////// module a23_execute ( input i_clk, input [31:0] i_read_data, input [4:0] i_read_data_alignment, // 2 LSBs of address in [4:3], appended // with 3 zeros input [31:0] i_copro_read_data, // From Co-Processor, to either Register // or Memory input i_data_access_exec, // from Instruction Decode stage // high means the memory access is a read // read or write, low for instruction output reg [31:0] o_copro_write_data = 'd0, output reg [31:0] o_write_data = 'd0, output reg [31:0] o_address = 32'hdead_dead, output reg o_adex = 'd0, // Address Exception output reg o_address_valid = 'd0, // Prevents the reset address value being a // wishbone access output [31:0] o_address_nxt, // un-registered version of address to the // cache rams address ports output reg o_priviledged = 'd0, // Priviledged access output reg o_exclusive = 'd0, // swap access output reg o_write_enable = 'd0, output reg [3:0] o_byte_enable = 'd0, output reg o_data_access = 'd0, // To Fetch stage. high = data fetch, // low = instruction fetch output [31:0] o_status_bits, // Full PC will all status bits, but PC part zero'ed out output o_multiply_done, // -------------------------------------------------- // Control signals from Instruction Decode stage // -------------------------------------------------- input i_fetch_stall, // stall all stages of the cpu at the same time input [1:0] i_status_bits_mode, input i_status_bits_irq_mask, input i_status_bits_firq_mask, input [31:0] i_imm32, input [4:0] i_imm_shift_amount, input i_shift_imm_zero, input [3:0] i_condition, input i_exclusive_exec, // swap access input [3:0] i_rm_sel, input [3:0] i_rds_sel, input [3:0] i_rn_sel, input [1:0] i_barrel_shift_amount_sel, input [1:0] i_barrel_shift_data_sel, input [1:0] i_barrel_shift_function, input [8:0] i_alu_function, input [1:0] i_multiply_function, input [2:0] i_interrupt_vector_sel, input [3:0] i_address_sel, input [1:0] i_pc_sel, input [1:0] i_byte_enable_sel, input [2:0] i_status_bits_sel, input [2:0] i_reg_write_sel, input i_user_mode_regs_load, input i_user_mode_regs_store_nxt, input i_firq_not_user_mode, input i_write_data_wen, input i_base_address_wen, // save LDM base address register, // in case of data abort input i_pc_wen, input [14:0] i_reg_bank_wen, input i_status_bits_flags_wen, input i_status_bits_mode_wen, input i_status_bits_irq_mask_wen, input i_status_bits_firq_mask_wen, input i_copro_write_data_wen ); `include "a23_localparams.v" `include "a23_functions.v" // ======================================================== // Internal signals // ======================================================== wire [31:0] write_data_nxt; wire [3:0] byte_enable_nxt; wire [31:0] pc_plus4; wire [31:0] pc_minus4; wire [31:0] address_plus4; wire [31:0] alu_plus4; wire [31:0] rn_plus4; wire [31:0] alu_out; wire [3:0] alu_flags; wire [31:0] rm; wire [31:0] rs; wire [31:0] rd; wire [31:0] rn; wire [31:0] pc; wire [31:0] pc_nxt; wire write_enable_nxt; wire [31:0] interrupt_vector; wire [7:0] shift_amount; wire [31:0] barrel_shift_in; wire [31:0] barrel_shift_out; wire barrel_shift_carry; wire [3:0] status_bits_flags_nxt; reg [3:0] status_bits_flags = 'd0; wire [1:0] status_bits_mode_nxt; reg [1:0] status_bits_mode = SVC; // one-hot encoded rs select wire [3:0] status_bits_mode_rds_oh_nxt; reg [3:0] status_bits_mode_rds_oh = 1'd1 << OH_SVC; wire status_bits_mode_rds_oh_update; wire status_bits_irq_mask_nxt; reg status_bits_irq_mask = 1'd1; wire status_bits_firq_mask_nxt; reg status_bits_firq_mask = 1'd1; wire execute; // high when condition execution is true wire [31:0] reg_write_nxt; wire pc_wen; wire [14:0] reg_bank_wen; wire [31:0] multiply_out; wire [1:0] multiply_flags; reg [31:0] base_address = 'd0; // Saves base address during LDM instruction in // case of data abort wire priviledged_nxt; wire priviledged_update; wire address_update; wire base_address_update; wire write_data_update; wire copro_write_data_update; wire byte_enable_update; wire data_access_update; wire write_enable_update; wire exclusive_update; wire status_bits_flags_update; wire status_bits_mode_update; wire status_bits_irq_mask_update; wire status_bits_firq_mask_update; wire [31:0] alu_out_pc_filtered; wire adex_nxt; // ======================================================== // Status Bits in PC register // ======================================================== assign o_status_bits = { status_bits_flags, // 31:28 status_bits_irq_mask, // 7 status_bits_firq_mask, // 6 24'd0, status_bits_mode }; // 1:0 = mode // ======================================================== // Status Bits Select // ======================================================== assign status_bits_flags_nxt = i_status_bits_sel == 3'd0 ? alu_flags : i_status_bits_sel == 3'd1 ? alu_out [31:28] : i_status_bits_sel == 3'd3 ? i_copro_read_data[31:28] : // 4 = update flags after a multiply operation { multiply_flags, status_bits_flags[1:0] } ; assign status_bits_mode_nxt = i_status_bits_sel == 3'd0 ? i_status_bits_mode : i_status_bits_sel == 3'd1 ? alu_out [1:0] : i_copro_read_data [1:0] ; // Used for the Rds output of register_bank - this special version of // status_bits_mode speeds up the critical path from status_bits_mode through the // register_bank, barrel_shifter and alu. It moves a mux needed for the // i_user_mode_regs_store_nxt signal back into the previous stage - // so its really part of the decode stage even though the logic is right here // In addition the signal is one-hot encoded to further speed up the logic assign status_bits_mode_rds_oh_nxt = i_user_mode_regs_store_nxt ? 1'd1 << OH_USR : status_bits_mode_update ? oh_status_bits_mode(status_bits_mode_nxt) : oh_status_bits_mode(status_bits_mode) ; assign status_bits_irq_mask_nxt = i_status_bits_sel == 3'd0 ? i_status_bits_irq_mask : i_status_bits_sel == 3'd1 ? alu_out [27] : i_copro_read_data [27] ; assign status_bits_firq_mask_nxt = i_status_bits_sel == 3'd0 ? i_status_bits_firq_mask : i_status_bits_sel == 3'd1 ? alu_out [26] : i_copro_read_data [26] ; // ======================================================== // Adders // ======================================================== assign pc_plus4 = pc + 32'd4; assign pc_minus4 = pc - 32'd4; assign address_plus4 = o_address + 32'd4; assign alu_plus4 = alu_out + 32'd4; assign rn_plus4 = rn + 32'd4; // ======================================================== // Barrel Shift Amount Select // ======================================================== // An immediate shift value of 0 is translated into 32 assign shift_amount = i_barrel_shift_amount_sel == 2'd0 ? 8'd0 : i_barrel_shift_amount_sel == 2'd1 ? rs[7:0] : i_barrel_shift_amount_sel == 2'd2 ? {3'd0, i_imm_shift_amount } : {3'd0, i_read_data_alignment } ; // ======================================================== // Barrel Shift Data Select // ======================================================== assign barrel_shift_in = i_barrel_shift_data_sel == 2'd0 ? i_imm32 : i_barrel_shift_data_sel == 2'd1 ? i_read_data : rm ; // ======================================================== // Interrupt vector Select // ======================================================== assign interrupt_vector = // Reset vector (i_interrupt_vector_sel == 3'd0) ? 32'h00000000 : // Data abort interrupt vector (i_interrupt_vector_sel == 3'd1) ? 32'h00000010 : // Fast interrupt vector (i_interrupt_vector_sel == 3'd2) ? 32'h0000001c : // Regular interrupt vector (i_interrupt_vector_sel == 3'd3) ? 32'h00000018 : // Prefetch abort interrupt vector (i_interrupt_vector_sel == 3'd5) ? 32'h0000000c : // Undefined instruction interrupt vector (i_interrupt_vector_sel == 3'd6) ? 32'h00000004 : // Software (SWI) interrupt vector (i_interrupt_vector_sel == 3'd7) ? 32'h00000008 : // Default is the address exception interrupt 32'h00000014 ; // ======================================================== // Address Select // ======================================================== // If rd is the pc, then seperate the address bits from the status bits for // generating the next address to fetch assign alu_out_pc_filtered = pc_wen && i_pc_sel == 2'd1 ? pcf(alu_out) : alu_out; // if current instruction does not execute because it does not meet the condition // then address advances to next instruction assign o_address_nxt = (!execute) ? pc_plus4 : (i_address_sel == 4'd0) ? pc_plus4 : (i_address_sel == 4'd1) ? alu_out_pc_filtered : (i_address_sel == 4'd2) ? interrupt_vector : (i_address_sel == 4'd3) ? pc : (i_address_sel == 4'd4) ? rn : (i_address_sel == 4'd5) ? address_plus4 : // MTRANS address incrementer (i_address_sel == 4'd6) ? alu_plus4 : // MTRANS decrement after rn_plus4 ; // MTRANS increment before // Data accesses use 32-bit address space, but instruction // accesses are restricted to 26 bit space assign adex_nxt = |o_address_nxt[31:26] && !i_data_access_exec; // ======================================================== // Program Counter Select // ======================================================== // If current instruction does not execute because it does not meet the condition // then PC advances to next instruction assign pc_nxt = (!execute) ? pc_plus4 : i_pc_sel == 2'd0 ? pc_plus4 : i_pc_sel == 2'd1 ? alu_out : interrupt_vector ; // ======================================================== // Register Write Select // ======================================================== wire [31:0] save_int_pc; wire [31:0] save_int_pc_m4; assign save_int_pc = { status_bits_flags, status_bits_irq_mask, status_bits_firq_mask, pc[25:2], status_bits_mode }; assign save_int_pc_m4 = { status_bits_flags, status_bits_irq_mask, status_bits_firq_mask, pc_minus4[25:2], status_bits_mode }; assign reg_write_nxt = i_reg_write_sel == 3'd0 ? alu_out : // save pc to lr on an interrupt i_reg_write_sel == 3'd1 ? save_int_pc_m4 : // to update Rd at the end of Multiplication i_reg_write_sel == 3'd2 ? multiply_out : i_reg_write_sel == 3'd3 ? o_status_bits : i_reg_write_sel == 3'd5 ? i_copro_read_data : // mrc i_reg_write_sel == 3'd6 ? base_address : save_int_pc ; // ======================================================== // Byte Enable Select // ======================================================== assign byte_enable_nxt = i_byte_enable_sel == 2'd0 ? 4'b1111 : // word write i_byte_enable_sel == 2'd2 ? // halfword write ( o_address_nxt[1] == 1'd0 ? 4'b0011 : 4'b1100 ) : o_address_nxt[1:0] == 2'd0 ? 4'b0001 : // byte write o_address_nxt[1:0] == 2'd1 ? 4'b0010 : o_address_nxt[1:0] == 2'd2 ? 4'b0100 : 4'b1000 ; // ======================================================== // Write Data Select // ======================================================== assign write_data_nxt = i_byte_enable_sel == 2'd0 ? rd : {4{rd[ 7:0]}} ; // ======================================================== // Conditional Execution // ======================================================== assign execute = conditional_execute ( i_condition, status_bits_flags ); // allow the PC to increment to the next instruction when current // instruction does not execute assign pc_wen = i_pc_wen || !execute; // only update register bank if current instruction executes assign reg_bank_wen = {{15{execute}} & i_reg_bank_wen}; // ======================================================== // Priviledged output flag // ======================================================== // Need to look at status_bits_mode_nxt so switch to priviledged mode // at the same time as assert interrupt vector address assign priviledged_nxt = ( i_status_bits_mode_wen ? status_bits_mode_nxt : status_bits_mode ) != USR ; // ======================================================== // Write Enable // ======================================================== // This must be de-asserted when execute is fault assign write_enable_nxt = execute && i_write_data_wen; // ======================================================== // Register Update // ======================================================== assign priviledged_update = !i_fetch_stall; assign data_access_update = !i_fetch_stall && execute; assign write_enable_update = !i_fetch_stall; assign write_data_update = !i_fetch_stall && execute && i_write_data_wen; assign exclusive_update = !i_fetch_stall && execute; assign address_update = !i_fetch_stall; assign byte_enable_update = !i_fetch_stall && execute && i_write_data_wen; assign copro_write_data_update = !i_fetch_stall && execute && i_copro_write_data_wen; assign base_address_update = !i_fetch_stall && execute && i_base_address_wen; assign status_bits_flags_update = !i_fetch_stall && execute && i_status_bits_flags_wen; assign status_bits_mode_update = !i_fetch_stall && execute && i_status_bits_mode_wen; assign status_bits_mode_rds_oh_update = !i_fetch_stall; assign status_bits_irq_mask_update = !i_fetch_stall && execute && i_status_bits_irq_mask_wen; assign status_bits_firq_mask_update = !i_fetch_stall && execute && i_status_bits_firq_mask_wen; always @( posedge i_clk ) begin o_priviledged <= priviledged_update ? priviledged_nxt : o_priviledged; o_exclusive <= exclusive_update ? i_exclusive_exec : o_exclusive; o_data_access <= data_access_update ? i_data_access_exec : o_data_access; o_write_enable <= write_enable_update ? write_enable_nxt : o_write_enable; o_write_data <= write_data_update ? write_data_nxt : o_write_data; o_address <= address_update ? o_address_nxt : o_address; o_adex <= address_update ? adex_nxt : o_adex; o_address_valid <= address_update ? 1'd1 : o_address_valid; o_byte_enable <= byte_enable_update ? byte_enable_nxt : o_byte_enable; o_copro_write_data <= copro_write_data_update ? write_data_nxt : o_copro_write_data; base_address <= base_address_update ? rn : base_address; status_bits_flags <= status_bits_flags_update ? status_bits_flags_nxt : status_bits_flags; status_bits_mode <= status_bits_mode_update ? status_bits_mode_nxt : status_bits_mode; status_bits_mode_rds_oh <= status_bits_mode_rds_oh_update ? status_bits_mode_rds_oh_nxt : status_bits_mode_rds_oh; status_bits_irq_mask <= status_bits_irq_mask_update ? status_bits_irq_mask_nxt : status_bits_irq_mask; status_bits_firq_mask <= status_bits_firq_mask_update ? status_bits_firq_mask_nxt : status_bits_firq_mask; end // ======================================================== // Instantiate Barrel Shift // ======================================================== a23_barrel_shift u_barrel_shift ( .i_in ( barrel_shift_in ), .i_carry_in ( status_bits_flags[1] ), .i_shift_amount ( shift_amount ), .i_shift_imm_zero ( i_shift_imm_zero ), .i_function ( i_barrel_shift_function ), .o_out ( barrel_shift_out ), .o_carry_out ( barrel_shift_carry ) ); // ======================================================== // Instantiate ALU // ======================================================== a23_alu u_alu ( .i_a_in ( rn ), .i_b_in ( barrel_shift_out ), .i_barrel_shift_carry ( barrel_shift_carry ), .i_status_bits_carry ( status_bits_flags[1] ), .i_function ( i_alu_function ), .o_out ( alu_out ), .o_flags ( alu_flags ) ); // ======================================================== // Instantiate Booth 64-bit Multiplier-Accumulator // ======================================================== a23_multiply u_multiply ( .i_clk ( i_clk ), .i_fetch_stall ( i_fetch_stall ), .i_a_in ( rs ), .i_b_in ( rm ), .i_function ( i_multiply_function ), .i_execute ( execute ), .o_out ( multiply_out ), .o_flags ( multiply_flags ), // [1] = N, [0] = Z .o_done ( o_multiply_done ) ); // ======================================================== // Instantiate Register Bank // ======================================================== a23_register_bank u_register_bank( .i_clk ( i_clk ), .i_fetch_stall ( i_fetch_stall ), .i_rm_sel ( i_rm_sel ), .i_rds_sel ( i_rds_sel ), .i_rn_sel ( i_rn_sel ), .i_pc_wen ( pc_wen ), .i_reg_bank_wen ( reg_bank_wen ), .i_pc ( pc_nxt[25:2] ), .i_reg ( reg_write_nxt ), .i_mode_idec ( i_status_bits_mode ), .i_mode_exec ( status_bits_mode ), .i_status_bits_flags ( status_bits_flags ), .i_status_bits_irq_mask ( status_bits_irq_mask ), .i_status_bits_firq_mask ( status_bits_firq_mask ), // pre-encoded in decode stage to speed up long path .i_firq_not_user_mode ( i_firq_not_user_mode ), // use one-hot version for speed, combine with i_user_mode_regs_store .i_mode_rds_exec ( status_bits_mode_rds_oh ), .i_user_mode_regs_load ( i_user_mode_regs_load ), .o_rm ( rm ), .o_rs ( rs ), .o_rd ( rd ), .o_rn ( rn ), .o_pc ( pc ) ); // ======================================================== // Debug - non-synthesizable code // ======================================================== //synopsys translate_off wire [(2*8)-1:0] xCONDITION; wire [(4*8)-1:0] xMODE; assign xCONDITION = i_condition == EQ ? "EQ" : i_condition == NE ? "NE" : i_condition == CS ? "CS" : i_condition == CC ? "CC" : i_condition == MI ? "MI" : i_condition == PL ? "PL" : i_condition == VS ? "VS" : i_condition == VC ? "VC" : i_condition == HI ? "HI" : i_condition == LS ? "LS" : i_condition == GE ? "GE" : i_condition == LT ? "LT" : i_condition == GT ? "GT" : i_condition == LE ? "LE" : i_condition == AL ? "AL" : "NV " ; assign xMODE = status_bits_mode == SVC ? "SVC" : status_bits_mode == IRQ ? "IRQ" : status_bits_mode == FIRQ ? "FIRQ" : status_bits_mode == USR ? "USR" : "XXX" ; //synopsys translate_on endmodule
Go to most recent revision | Compare with Previous | Blame | View Log