URL
https://opencores.org/ocsvn/amber/amber/trunk
Subversion Repositories amber
[/] [amber/] [trunk/] [hw/] [vlog/] [lib/] [xs6_sram_256x21_line_en.v] - Rev 17
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////// // // // Wrapper for Xilinx Spartan-6 RAM Block // // // // This file is part of the Amber project // // http://www.opencores.org/project,amber // // // // Description // // 256 words x 21 bits with a single write enable // // // // Author(s): // // - Conor Santifort, csantifort.amber@gmail.com // // // ////////////////////////////////////////////////////////////////// // // // Copyright (C) 2010 Authors and OPENCORES.ORG // // // // This source file may be used and distributed without // // restriction provided that this copyright statement is not // // removed from the file and that any derivative work contains // // the original copyright notice and the associated disclaimer. // // // // This source file is free software; you can redistribute it // // and/or modify it under the terms of the GNU Lesser General // // Public License as published by the Free Software Foundation; // // either version 2.1 of the License, or (at your option) any // // later version. // // // // This source is distributed in the hope that it will be // // useful, but WITHOUT ANY WARRANTY; without even the implied // // warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR // // PURPOSE. See the GNU Lesser General Public License for more // // details. // // // // You should have received a copy of the GNU Lesser General // // Public License along with this source; if not, download it // // from http://www.opencores.org/lgpl.shtml // // // ////////////////////////////////////////////////////////////////// module xs6_sram_256x21_line_en #( parameter DATA_WIDTH = 21, parameter INITIALIZE_TO_ZERO = 0, parameter ADDRESS_WIDTH = 8 ) ( input i_clk, input [DATA_WIDTH-1:0] i_write_data, input i_write_enable, input [ADDRESS_WIDTH-1:0] i_address, output [DATA_WIDTH-1:0] o_read_data ); wire [15:0] read_data_lo, read_data_hi; assign o_read_data = { read_data_hi[12:8], read_data_hi[4:0], read_data_lo[12:8], read_data_lo[5:0] }; RAMB8BWER #( .DATA_WIDTH_A ( 36 ), .DATA_WIDTH_B ( 36 ), .RAM_MODE ( "SDP" ), .SIM_COLLISION_CHECK ( "GENERATE_X_ONLY" ), .WRITE_MODE_A ( "READ_FIRST" ), .WRITE_MODE_B ( "READ_FIRST" ) ) u_ramb8bwer ( .CLKAWRCLK ( i_clk ), .CLKBRDCLK ( i_clk ), .ADDRAWRADDR ( {i_address, 5'd0} ), .ADDRBRDADDR ( {i_address, 5'd0} ), .ENAWREN ( i_write_enable ), .ENBRDEN ( ~i_write_enable ), .WEAWEL ( {2{i_write_enable}} ), .WEBWEU ( {2{i_write_enable}} ), .DIADI ( {3'd0, i_write_data[10: 6], 2'd0, i_write_data[ 5: 0] } ), .DOADO ( read_data_lo ), .DIBDI ( {3'd0, i_write_data[20:16], 3'd0, i_write_data[15:11] } ), .DOBDO ( read_data_hi ), // These guys are not used, so they are just tied off // ---------------------------------------------------- .DIPBDIP ( 2'd0 ), .DIPADIP ( 2'd0 ), .DOPADOP ( ), .DOPBDOP ( ), .REGCEA ( 1'd0 ), .REGCEBREGCE ( 1'd0 ), .RSTA ( 1'd0 ), .RSTBRST ( 1'd0 ) ); //synopsys translate_off initial begin if ( DATA_WIDTH != 21 ) $display("%M Warning: Incorrect parameter DATA_WIDTH"); if ( ADDRESS_WIDTH != 8 ) $display("%M Warning: Incorrect parameter ADDRESS_WIDTH"); end //synopsys translate_on endmodule
Go to most recent revision | Compare with Previous | Blame | View Log