OpenCores
URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] [vlog/] [xs6_ddr3/] [ddr3/] [user_design/] [mig.prj] - Rev 64

Compare with Previous | Blame | View Log

<?xml version="1.0" encoding="UTF-8"?>
<Project NoOfControllers="1" >
    <ModuleName>ddr3</ModuleName>
    <TargetFPGA>xc6slx45t-fgg484/-3</TargetFPGA>
    <Version>3.92</Version>
    <Controller number="3" >
        <MemoryDevice>DDR3_SDRAM/Components/MT41J64M16XX-187E</MemoryDevice>
        <TimePeriod>2500</TimePeriod>
        <EnableVoltageRange>0</EnableVoltageRange>
        <DataMask>1</DataMask>
        <CustomPart>FALSE</CustomPart>
        <NewPartName></NewPartName>
        <RowAddress>13</RowAddress>
        <ColAddress>10</ColAddress>
        <BankAddress>3</BankAddress>
        <TimingParameters>
            <Parameters twtr="7.5" trefi="7.8" twr="15" trtp="7.5" trfc="110" trp="13.13" tras="37.5" trcd="13.13" />
        </TimingParameters>
        <mrBurstLength name="Burst Length" >8(00)</mrBurstLength>
        <mrCasLatency name="CAS Latency" >6</mrCasLatency>
        <emrDllEnable name="DLL Enable" >Enable</emrDllEnable>
        <emrOutputDriveStrength name="Output Driver Impedance Control" >RZQ/6</emrOutputDriveStrength>
        <emrRTT name="RTT (nominal) - ODT" >RZQ/4</emrRTT>
        <emrPosted name="Additive Latency (AL)" >0</emrPosted>
        <emrOCD name="Write Leveling Enable" >Disabled</emrOCD>
        <emrDQS name="TDQS enable" >Disabled</emrDQS>
        <mr2PartialArraySelfRefresh name="Partial-Array Self Refresh" >Full Array</mr2PartialArraySelfRefresh>
        <mr2CasWriteLatency name="CAS write latency" >5</mr2CasWriteLatency>
        <mr2AutoSelfRefresh name="Auto Self Refresh" >Enabled</mr2AutoSelfRefresh>
        <mr2SelfRefreshTempRange name="High Temparature Self Refresh Rate" >Normal</mr2SelfRefreshTempRange>
        <PortInterface>NATIVE</PortInterface>
        <Class>Class II</Class>
        <DataClass>Class II</DataClass>
        <InputPinTermination>UNCALIB_TERM</InputPinTermination>
        <DataTermination>50 Ohms</DataTermination>
        <CalibrationRowAddress></CalibrationRowAddress>
        <CalibrationColumnAddress></CalibrationColumnAddress>
        <CalibrationBankAddress></CalibrationBankAddress>
        <SystemClock>Single-Ended</SystemClock>
        <BypassCalibration>1</BypassCalibration>
        <DebugSignals>Disable</DebugSignals>
        <SystemClock>Single-Ended</SystemClock>
        <Configuration>One 128-bit bi-directional port</Configuration>
        <RzqPin>R7</RzqPin>
        <ZioPin>W4</ZioPin>
        <PortsSelected>Port0</PortsSelected>
        <PortDirections>Bi-directional</PortDirections>
        <UserMemoryAddressMap>ROW_BANK_COLUMN</UserMemoryAddressMap>
        <ArbitrationAlgorithm>Round Robin</ArbitrationAlgorithm>
        <TimeSlot0>0</TimeSlot0>
        <TimeSlot1>0</TimeSlot1>
        <TimeSlot2>0</TimeSlot2>
        <TimeSlot3>0</TimeSlot3>
        <TimeSlot4>0</TimeSlot4>
        <TimeSlot5>0</TimeSlot5>
        <TimeSlot6>0</TimeSlot6>
        <TimeSlot7>0</TimeSlot7>
        <TimeSlot8>0</TimeSlot8>
        <TimeSlot9>0</TimeSlot9>
        <TimeSlot10>0</TimeSlot10>
        <TimeSlot11>0</TimeSlot11>
    </Controller>
</Project>

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.