OpenCores
URL https://opencores.org/ocsvn/ao486/ao486/trunk

Subversion Repositories ao486

[/] [ao486/] [trunk/] [bochs486/] [cpu/] [tasking.cc] - Rev 7

Go to most recent revision | Compare with Previous | Blame | View Log

/////////////////////////////////////////////////////////////////////////
// $Id: tasking.cc 11654 2013-03-15 08:26:22Z sshwarts $
/////////////////////////////////////////////////////////////////////////
//
//  Copyright (C) 2001-2012  The Bochs Project
//
//  This library is free software; you can redistribute it and/or
//  modify it under the terms of the GNU Lesser General Public
//  License as published by the Free Software Foundation; either
//  version 2 of the License, or (at your option) any later version.
//
//  This library is distributed in the hope that it will be useful,
//  but WITHOUT ANY WARRANTY; without even the implied warranty of
//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
//  Lesser General Public License for more details.
//
//  You should have received a copy of the GNU Lesser General Public
//  License along with this library; if not, write to the Free Software
//  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA B 02110-1301 USA
/////////////////////////////////////////////////////////////////////////
 
#define NEED_CPU_REG_SHORTCUTS 1
#include "bochs.h"
#include "cpu.h"
#define LOG_THIS BX_CPU_THIS_PTR
 
// Notes:
// ======
 
  // ======================
  // 286 Task State Segment
  // ======================
  // dynamic item                      | hex  dec  offset
  // 0       task LDT selector         | 2a   42
  // 1       DS selector               | 28   40
  // 1       SS selector               | 26   38
  // 1       CS selector               | 24   36
  // 1       ES selector               | 22   34
  // 1       DI                        | 20   32
  // 1       SI                        | 1e   30
  // 1       BP                        | 1c   28
  // 1       SP                        | 1a   26
  // 1       BX                        | 18   24
  // 1       DX                        | 16   22
  // 1       CX                        | 14   20
  // 1       AX                        | 12   18
  // 1       flag word                 | 10   16
  // 1       IP (entry point)          | 0e   14
  // 0       SS for CPL 2              | 0c   12
  // 0       SP for CPL 2              | 0a   10
  // 0       SS for CPL 1              | 08   08
  // 0       SP for CPL 1              | 06   06
  // 0       SS for CPL 0              | 04   04
  // 0       SP for CPL 0              | 02   02
  //         back link selector to TSS | 00   00
 
 
  // ======================
  // 386 Task State Segment
  // ======================
  // |31            16|15                    0| hex dec
  // |I/O Map Base    |000000000000000000000|T| 64  100 static
  // |0000000000000000| LDT                   | 60  96  static
  // |0000000000000000| GS selector           | 5c  92  dynamic
  // |0000000000000000| FS selector           | 58  88  dynamic
  // |0000000000000000| DS selector           | 54  84  dynamic
  // |0000000000000000| SS selector           | 50  80  dynamic
  // |0000000000000000| CS selector           | 4c  76  dynamic
  // |0000000000000000| ES selector           | 48  72  dynamic
  // |                EDI                     | 44  68  dynamic
  // |                ESI                     | 40  64  dynamic
  // |                EBP                     | 3c  60  dynamic
  // |                ESP                     | 38  56  dynamic
  // |                EBX                     | 34  52  dynamic
  // |                EDX                     | 30  48  dynamic
  // |                ECX                     | 2c  44  dynamic
  // |                EAX                     | 28  40  dynamic
  // |                EFLAGS                  | 24  36  dynamic
  // |                EIP (entry point)       | 20  32  dynamic
  // |           CR3 (PDPR)                   | 1c  28  static
  // |000000000000000 | SS for CPL 2          | 18  24  static
  // |           ESP for CPL 2                | 14  20  static
  // |000000000000000 | SS for CPL 1          | 10  16  static
  // |           ESP for CPL 1                | 0c  12  static
  // |000000000000000 | SS for CPL 0          | 08  08  static
  // |           ESP for CPL 0                | 04  04  static
  // |000000000000000 | back link to prev TSS | 00  00  dynamic (updated only when return expected)
 
 
  // ==================================================
  // Effect of task switch on Busy, NT, and Link Fields
  // ==================================================
 
  // Field         jump        call/interrupt     iret
  // ------------------------------------------------------
  // new busy bit  Set         Set                No change
  // old busy bit  Cleared     No change          Cleared
  // new NT flag   No change   Set                No change
  // old NT flag   No change   No change          Cleared
  // new link      No change   old TSS selector   No change
  // old link      No change   No change          No change
  // CR0.TS        Set         Set                Set
 
  // Note: I checked 386, 486, and Pentium, and they all exhibited
  //       exactly the same behaviour as above.  There seems to
  //       be some misprints in the Intel docs.
 
void BX_CPU_C::task_switch(bxInstruction_c *i, bx_selector_t *tss_selector,
                 bx_descriptor_t *tss_descriptor, unsigned source,
                 Bit32u dword1, Bit32u dword2, bx_bool push_error, Bit32u error_code)
{
  Bit32u obase32; // base address of old TSS
  Bit32u nbase32; // base address of new TSS
  Bit32u temp32, newCR3;
  Bit16u raw_cs_selector, raw_ss_selector, raw_ds_selector, raw_es_selector,
         raw_fs_selector, raw_gs_selector, raw_ldt_selector;
  Bit16u trap_word;
  bx_selector_t cs_selector, ss_selector, ds_selector, es_selector,
                fs_selector, gs_selector, ldt_selector;
  bx_descriptor_t cs_descriptor, ss_descriptor, ldt_descriptor;
  Bit32u old_TSS_max, new_TSS_max, old_TSS_limit, new_TSS_limit;
  Bit32u newEAX, newECX, newEDX, newEBX;
  Bit32u newESP, newEBP, newESI, newEDI;
  Bit32u newEFLAGS, newEIP;
 
  BX_DEBUG(("TASKING: ENTER"));
 
  invalidate_prefetch_q();
 
  // Discard any traps and inhibits for new context; traps will
  // resume upon return.
  BX_CPU_THIS_PTR debug_trap &= ~BX_DEBUG_SINGLE_STEP_BIT;
  BX_CPU_THIS_PTR inhibit_mask = 0;
 
  // STEP 1: The following checks are made before calling task_switch(),
  //         for JMP & CALL only. These checks are NOT made for exceptions,
  //         interrupts & IRET.
  //
  //   1) TSS DPL must be >= CPL
  //   2) TSS DPL must be >= TSS selector RPL
  //   3) TSS descriptor is not busy.
 
  // STEP 2: The processor performs limit-checking on the target TSS
  //         to verify that the TSS limit is greater than or equal
  //         to 67h (2Bh for 16-bit TSS).
 
  // Gather info about new TSS
  if (tss_descriptor->type <= 3) { // {1,3}
    new_TSS_max = 0x2B;
  }
  else { // tss_descriptor->type = {9,11}
    new_TSS_max = 0x67;
  }
 
  nbase32 = (Bit32u) tss_descriptor->u.segment.base;
  new_TSS_limit = tss_descriptor->u.segment.limit_scaled;
 
  if (new_TSS_limit < new_TSS_max) {
    BX_ERROR(("task_switch(): new TSS limit < %d", new_TSS_max));
    exception(BX_TS_EXCEPTION, tss_selector->value & 0xfffc);
  }
 
#if BX_SUPPORT_SVM
  if (BX_CPU_THIS_PTR in_svm_guest) {
    if (SVM_INTERCEPT(SVM_INTERCEPT0_TASK_SWITCH))
      SvmInterceptTaskSwitch(tss_selector->value, source, push_error, error_code);
  } 
#endif
 
#if BX_SUPPORT_VMX
  if (BX_CPU_THIS_PTR in_vmx_guest)
    VMexit_TaskSwitch(tss_selector->value, source);
#endif
 
  // Gather info about old TSS
  if (BX_CPU_THIS_PTR tr.cache.type <= 3) {
    old_TSS_max = 0x29;
  }
  else {
    old_TSS_max = 0x5F;
  }
 
  obase32 = (Bit32u) BX_CPU_THIS_PTR tr.cache.u.segment.base;        // old TSS.base
  old_TSS_limit = BX_CPU_THIS_PTR tr.cache.u.segment.limit_scaled;
 
  if (old_TSS_limit < old_TSS_max) {
    BX_ERROR(("task_switch(): old TSS limit < %d", old_TSS_max));
    exception(BX_TS_EXCEPTION, BX_CPU_THIS_PTR tr.selector.value & 0xfffc);
  }
 
  if (obase32 == nbase32) {
    BX_INFO(("TASK SWITCH: switching to the same TSS !"));
  }
 
  // Check that old TSS, new TSS, and all segment descriptors
  // used in the task switch are paged in.
  if (BX_CPU_THIS_PTR cr0.get_PG())
  {
    translate_linear(BX_TLB_ENTRY_OF(nbase32), nbase32, 0, BX_READ);  // old TSS
    translate_linear(BX_TLB_ENTRY_OF(nbase32 + new_TSS_max), nbase32 + new_TSS_max, 0, BX_READ);
 
    // ??? Humm, we check the new TSS region with READ above,
    // but sometimes we need to write the link field in that
    // region.  We also sometimes update other fields, perhaps
    // we need to WRITE check them here also, so that we keep
    // the written state consistent (ie, we don't encounter a
    // page fault in the middle).
 
    if (source == BX_TASK_FROM_CALL || source == BX_TASK_FROM_INT)
    {
      translate_linear(BX_TLB_ENTRY_OF(nbase32),     nbase32,     0, BX_WRITE);
      translate_linear(BX_TLB_ENTRY_OF(nbase32 + 1), nbase32 + 1, 0, BX_WRITE);
    }
  }
 
  // Privilege and busy checks done in CALL, JUMP, INT, IRET
 
  // Step 3: If JMP or IRET, clear busy bit in old task TSS descriptor,
  //         otherwise leave set.
 
  // effect on Busy bit of old task
  if (source == BX_TASK_FROM_JUMP || source == BX_TASK_FROM_IRET) {
    // Bit is cleared
    Bit32u laddr = (Bit32u) BX_CPU_THIS_PTR gdtr.base + (BX_CPU_THIS_PTR tr.selector.index<<3) + 4;
    access_read_linear(laddr, 4, 0, BX_RW, &temp32);
    temp32 &= ~0x200;
    access_write_linear(laddr, 4, 0, &temp32);
  }
 
  // STEP 4: If the task switch was initiated with an IRET instruction,
  //         clears the NT flag in a temporarily saved EFLAGS image;
  //         if initiated with a CALL or JMP instruction, an exception, or
  //         an interrupt, the NT flag is left unchanged.
 
  Bit32u oldEFLAGS = read_eflags();
 
  /* if moving to busy task, clear NT bit */
  if (tss_descriptor->type == BX_SYS_SEGMENT_BUSY_286_TSS ||
      tss_descriptor->type == BX_SYS_SEGMENT_BUSY_386_TSS)
  {
    oldEFLAGS &= ~EFlagsNTMask;
  }
 
  // STEP 5: Save the current task state in the TSS. Up to this point,
  //         any exception that occurs aborts the task switch without
  //         changing the processor state.
 
  /* save current machine state in old task's TSS */
 
  if (BX_CPU_THIS_PTR tr.cache.type <= 3) {
    // check that we won't page fault while writing
    if (BX_CPU_THIS_PTR cr0.get_PG()) {
      Bit32u start = Bit32u(obase32 + 14), end = Bit32u(obase32 + 41);
 
      translate_linear(BX_TLB_ENTRY_OF(start), start, 0, BX_WRITE);
      translate_linear(BX_TLB_ENTRY_OF(end),   end,   0, BX_WRITE);
    }
 
    system_write_word(Bit32u(obase32 + 14), IP);
    system_write_word(Bit32u(obase32 + 16), oldEFLAGS);
    system_write_word(Bit32u(obase32 + 18), AX);
    system_write_word(Bit32u(obase32 + 20), CX);
    system_write_word(Bit32u(obase32 + 22), DX);
    system_write_word(Bit32u(obase32 + 24), BX);
    system_write_word(Bit32u(obase32 + 26), SP);
    system_write_word(Bit32u(obase32 + 28), BP);
    system_write_word(Bit32u(obase32 + 30), SI);
    system_write_word(Bit32u(obase32 + 32), DI);
 
    system_write_word(Bit32u(obase32 + 34),
           BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector.value);
    system_write_word(Bit32u(obase32 + 36),
           BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value);
    system_write_word(Bit32u(obase32 + 38),
           BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.value);
    system_write_word(Bit32u(obase32 + 40),
           BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector.value);
  }
  else {
    // check that we won't page fault while writing
    if (BX_CPU_THIS_PTR cr0.get_PG()) {
      Bit32u start = Bit32u(obase32 + 0x20), end = Bit32u(obase32 + 0x5d);
 
      translate_linear(BX_TLB_ENTRY_OF(start), start, 0, BX_WRITE);
      translate_linear(BX_TLB_ENTRY_OF(end),   end,   0, BX_WRITE);
    }
 
    system_write_dword(Bit32u(obase32 + 0x20), EIP);
    system_write_dword(Bit32u(obase32 + 0x24), oldEFLAGS);
    system_write_dword(Bit32u(obase32 + 0x28), EAX);
    system_write_dword(Bit32u(obase32 + 0x2c), ECX);
    system_write_dword(Bit32u(obase32 + 0x30), EDX);
    system_write_dword(Bit32u(obase32 + 0x34), EBX);
    system_write_dword(Bit32u(obase32 + 0x38), ESP);
    system_write_dword(Bit32u(obase32 + 0x3c), EBP);
    system_write_dword(Bit32u(obase32 + 0x40), ESI);
    system_write_dword(Bit32u(obase32 + 0x44), EDI);
 
    system_write_word(Bit32u(obase32 + 0x48),
           BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector.value);
    system_write_word(Bit32u(obase32 + 0x4c),
           BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value);
    system_write_word(Bit32u(obase32 + 0x50),
           BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.value);
    system_write_word(Bit32u(obase32 + 0x54),
           BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector.value);
    system_write_word(Bit32u(obase32 + 0x58),
           BX_CPU_THIS_PTR sregs[BX_SEG_REG_FS].selector.value);
    system_write_word(Bit32u(obase32 + 0x5c),
           BX_CPU_THIS_PTR sregs[BX_SEG_REG_GS].selector.value);
  }
 
  // effect on link field of new task
  if (source == BX_TASK_FROM_CALL || source == BX_TASK_FROM_INT)
  {
    // set to selector of old task's TSS
    system_write_word(nbase32, BX_CPU_THIS_PTR tr.selector.value);
  }
 
  // STEP 6: The new-task state is loaded from the TSS
 
  if (tss_descriptor->type <= 3) {
    newEIP    = system_read_word(Bit32u(nbase32 + 14));
    newEFLAGS = system_read_word(Bit32u(nbase32 + 16));
 
    // incoming TSS is 16bit:
    //   - upper word of general registers is set to 0xFFFF
    //   - upper word of eflags is zero'd
    //   - FS, GS are zero'd
    //   - upper word of eIP is zero'd
    Bit16u temp16 = system_read_word(Bit32u(nbase32 + 18));
      newEAX = 0xffff0000 | temp16;
    temp16 = system_read_word(Bit32u(nbase32 + 20));
      newECX = 0xffff0000 | temp16;
    temp16 = system_read_word(Bit32u(nbase32 + 22));
      newEDX = 0xffff0000 | temp16;
    temp16 = system_read_word(Bit32u(nbase32 + 24));
      newEBX = 0xffff0000 | temp16;
    temp16 = system_read_word(Bit32u(nbase32 + 26));
      newESP = 0xffff0000 | temp16;
    temp16 = system_read_word(Bit32u(nbase32 + 28));
      newEBP = 0xffff0000 | temp16;
    temp16 = system_read_word(Bit32u(nbase32 + 30));
      newESI = 0xffff0000 | temp16;
    temp16 = system_read_word(Bit32u(nbase32 + 32));
      newEDI = 0xffff0000 | temp16;
 
    raw_es_selector  = system_read_word(Bit32u(nbase32 + 34));
    raw_cs_selector  = system_read_word(Bit32u(nbase32 + 36));
    raw_ss_selector  = system_read_word(Bit32u(nbase32 + 38));
    raw_ds_selector  = system_read_word(Bit32u(nbase32 + 40));
    raw_ldt_selector = system_read_word(Bit32u(nbase32 + 42));
 
    raw_fs_selector = 0; // use a NULL selector
    raw_gs_selector = 0; // use a NULL selector
    // No CR3 change for 286 task switch
    newCR3 = 0;   // keep compiler happy (not used)
    trap_word = 0; // keep compiler happy (not used)
  }
  else {
    if (BX_CPU_THIS_PTR cr0.get_PG())
      newCR3 = system_read_dword(Bit32u(nbase32 + 0x1c));
    else
      newCR3 = 0;   // keep compiler happy (not used)
 
    newEIP    = system_read_dword(Bit32u(nbase32 + 0x20));
    newEFLAGS = system_read_dword(Bit32u(nbase32 + 0x24));
    newEAX    = system_read_dword(Bit32u(nbase32 + 0x28));
    newECX    = system_read_dword(Bit32u(nbase32 + 0x2c));
    newEDX    = system_read_dword(Bit32u(nbase32 + 0x30));
    newEBX    = system_read_dword(Bit32u(nbase32 + 0x34));
    newESP    = system_read_dword(Bit32u(nbase32 + 0x38));
    newEBP    = system_read_dword(Bit32u(nbase32 + 0x3c));
    newESI    = system_read_dword(Bit32u(nbase32 + 0x40));
    newEDI    = system_read_dword(Bit32u(nbase32 + 0x44));
 
    raw_es_selector  = system_read_word(Bit32u(nbase32 + 0x48));
    raw_cs_selector  = system_read_word(Bit32u(nbase32 + 0x4c));
    raw_ss_selector  = system_read_word(Bit32u(nbase32 + 0x50));
    raw_ds_selector  = system_read_word(Bit32u(nbase32 + 0x54));
    raw_fs_selector  = system_read_word(Bit32u(nbase32 + 0x58));
    raw_gs_selector  = system_read_word(Bit32u(nbase32 + 0x5c));
    raw_ldt_selector = system_read_word(Bit32u(nbase32 + 0x60));
    trap_word        = system_read_word(Bit32u(nbase32 + 0x64));
  }
 
  // Step 7: If CALL, interrupt, or JMP, set busy flag in new task's
  //         TSS descriptor.  If IRET, leave set.
 
  if (source != BX_TASK_FROM_IRET)
  {
    // set the new task's busy bit
    Bit32u laddr = (Bit32u)(BX_CPU_THIS_PTR gdtr.base) + (tss_selector->index<<3) + 4;
    access_read_linear(laddr, 4, 0, BX_RW, &dword2);
    dword2 |= 0x200;
    access_write_linear(laddr, 4, 0, &dword2);
  }
 
  //
  // Commit point.  At this point, we commit to the new
  // context.  If an unrecoverable error occurs in further
  // processing, we complete the task switch without performing
  // additional access and segment availablility checks and
  // generate the appropriate exception prior to beginning
  // execution of the new task.
  //
 
  // Step 8: Load the task register with the segment selector and
  //         descriptor for the new task TSS.
 
  BX_CPU_THIS_PTR tr.selector = *tss_selector;
  BX_CPU_THIS_PTR tr.cache    = *tss_descriptor;
  BX_CPU_THIS_PTR tr.cache.type |= 2; // mark TSS in TR as busy
 
  // Step 9: Set TS flag in the CR0 image stored in the new task TSS.
  BX_CPU_THIS_PTR cr0.set_TS(1);
 
  // Task switch clears LE/L3/L2/L1/L0 in DR7
  BX_CPU_THIS_PTR dr7.val32 &= ~0x00000155;
 
  // Step 10: If call or interrupt, set the NT flag in the eflags
  //          image stored in new task's TSS.  If IRET or JMP,
  //          NT is restored from new TSS eflags image. (no change)
 
  // effect on NT flag of new task
  if (source == BX_TASK_FROM_CALL || source == BX_TASK_FROM_INT) {
    newEFLAGS |= EFlagsNTMask; // NT flag is set
  }
 
  // Step 11: Load the new task (dynamic) state from new TSS.
  //          Any errors associated with loading and qualification of
  //          segment descriptors in this step occur in the new task's
  //          context.  State loaded here includes LDTR, CR3,
  //          EFLAGS, EIP, general purpose registers, and segment
  //          descriptor parts of the segment registers.
 
  BX_CPU_THIS_PTR prev_rip = EIP = newEIP;
 
  EAX = newEAX;
  ECX = newECX;
  EDX = newEDX;
  EBX = newEBX;
  ESP = newESP;
  EBP = newEBP;
  ESI = newESI;
  EDI = newEDI;
 
  BX_CPU_THIS_PTR speculative_rsp = 0;
 
  writeEFlags(newEFLAGS, EFlagsValidMask);
 
  // Fill in selectors for all segment registers.  If errors
  // occur later, the selectors will at least be loaded.
  parse_selector(raw_cs_selector, &cs_selector);
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector = cs_selector;
  parse_selector(raw_ss_selector, &ss_selector);
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector = ss_selector;
  parse_selector(raw_ds_selector, &ds_selector);
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector = ds_selector;
  parse_selector(raw_es_selector, &es_selector);
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector = es_selector;
  parse_selector(raw_fs_selector, &fs_selector);
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_FS].selector = fs_selector;
  parse_selector(raw_gs_selector, &gs_selector);
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_GS].selector = gs_selector;
  parse_selector(raw_ldt_selector, &ldt_selector);
  BX_CPU_THIS_PTR ldtr.selector = ldt_selector;
 
  // Start out with invalid descriptor caches, fill in with
  // values only as they are validated
  BX_CPU_THIS_PTR ldtr.cache.valid = 0;
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = 0;
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = 0;
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.valid = 0;
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.valid = 0;
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_FS].cache.valid = 0;
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_GS].cache.valid = 0;
 
  if ((tss_descriptor->type >= 9) && BX_CPU_THIS_PTR cr0.get_PG()) {
    // change CR3 only if it actually modified
    if (newCR3 != BX_CPU_THIS_PTR cr3) {
      BX_DEBUG(("task_switch changing CR3 to 0x%08x", newCR3));
 
      if (! SetCR3(newCR3)) // Tell paging unit about new cr3 value
        exception(BX_TS_EXCEPTION, 0);
 
#if BX_CPU_LEVEL >= 6
      if (BX_CPU_THIS_PTR cr0.get_PG() && BX_CPU_THIS_PTR cr4.get_PAE()) {
        if (! CheckPDPTR(newCR3)) {
          BX_ERROR(("task_switch(exception after commit point): PDPTR check failed !"));
 
          // clear PDPTRs before raising task switch exception
          for (unsigned n=0; n<4; n++)
            BX_CPU_THIS_PTR PDPTR_CACHE.entry[n] = 0;
 
          exception(BX_TS_EXCEPTION, 0);
        }
      }
#endif
 
      BX_INSTR_TLB_CNTRL(BX_CPU_ID, BX_INSTR_TASK_SWITCH, newCR3);
    }
  }
 
  unsigned save_CPL = CPL;
  /* set CPL to 3 to force a privilege level change and stack switch if SS
     is not properly loaded */
  CPL = 3;
 
  // LDTR
  if (ldt_selector.ti) {
    // LDT selector must be in GDT
    BX_INFO(("task_switch(exception after commit point): bad LDT selector TI=1"));
    exception(BX_TS_EXCEPTION, raw_ldt_selector & 0xfffc);
  }
 
  if ((raw_ldt_selector & 0xfffc) != 0) {
    bx_bool good = fetch_raw_descriptor2(&ldt_selector, &dword1, &dword2);
    if (!good) {
      BX_ERROR(("task_switch(exception after commit point): bad LDT fetch"));
      exception(BX_TS_EXCEPTION, raw_ldt_selector & 0xfffc);
    }
 
    parse_descriptor(dword1, dword2, &ldt_descriptor);
 
    // LDT selector of new task is valid, else #TS(new task's LDT)
    if (ldt_descriptor.valid==0 ||
        ldt_descriptor.type!=BX_SYS_SEGMENT_LDT ||
        ldt_descriptor.segment)
    {
      BX_ERROR(("task_switch(exception after commit point): bad LDT segment"));
      exception(BX_TS_EXCEPTION, raw_ldt_selector & 0xfffc);
    }
 
    // LDT of new task is present in memory, else #TS(new tasks's LDT)
    if (! IS_PRESENT(ldt_descriptor)) {
      BX_ERROR(("task_switch(exception after commit point): LDT not present"));
      exception(BX_TS_EXCEPTION, raw_ldt_selector & 0xfffc);
    }
 
    // All checks pass, fill in LDTR shadow cache
    BX_CPU_THIS_PTR ldtr.cache = ldt_descriptor;
  }
  else {
    // NULL LDT selector is OK, leave cache invalid
  }
 
  if (v8086_mode()) {
    // load seg regs as 8086 registers
    load_seg_reg(&BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS], raw_ss_selector);
    load_seg_reg(&BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS], raw_ds_selector);
    load_seg_reg(&BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES], raw_es_selector);
    load_seg_reg(&BX_CPU_THIS_PTR sregs[BX_SEG_REG_FS], raw_fs_selector);
    load_seg_reg(&BX_CPU_THIS_PTR sregs[BX_SEG_REG_GS], raw_gs_selector);
    load_seg_reg(&BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS], raw_cs_selector);
    // CPL is set from CS selector
  }
  else {
 
    // SS
    if ((raw_ss_selector & 0xfffc) != 0)
    {
      bx_bool good = fetch_raw_descriptor2(&ss_selector, &dword1, &dword2);
      if (!good) {
        BX_ERROR(("task_switch(exception after commit point): bad SS fetch"));
        exception(BX_TS_EXCEPTION, raw_ss_selector & 0xfffc);
      }
 
      parse_descriptor(dword1, dword2, &ss_descriptor);
 
      // SS selector must be within its descriptor table limits else #TS(SS)
      // SS descriptor AR byte must must indicate writable data segment,
      // else #TS(SS)
      if (ss_descriptor.valid==0 || ss_descriptor.segment==0 ||
           IS_CODE_SEGMENT(ss_descriptor.type) ||
          !IS_DATA_SEGMENT_WRITEABLE(ss_descriptor.type))
      {
        BX_ERROR(("task_switch(exception after commit point): SS not valid or writeable segment"));
        exception(BX_TS_EXCEPTION, raw_ss_selector & 0xfffc);
      }
 
      //
      // Stack segment is present in memory, else #SS(new stack segment)
      //
      if (! IS_PRESENT(ss_descriptor)) {
        BX_ERROR(("task_switch(exception after commit point): SS not present"));
        exception(BX_SS_EXCEPTION, raw_ss_selector & 0xfffc);
      }
 
      // Stack segment DPL matches CS.RPL, else #TS(new stack segment)
      if (ss_descriptor.dpl != cs_selector.rpl) {
        BX_ERROR(("task_switch(exception after commit point): SS.rpl != CS.RPL"));
        exception(BX_TS_EXCEPTION, raw_ss_selector & 0xfffc);
      }
 
      // Stack segment DPL matches selector RPL, else #TS(new stack segment)
      if (ss_descriptor.dpl != ss_selector.rpl) {
        BX_ERROR(("task_switch(exception after commit point): SS.dpl != SS.rpl"));
        exception(BX_TS_EXCEPTION, raw_ss_selector & 0xfffc);
      }
 
      touch_segment(&ss_selector, &ss_descriptor);
 
      // All checks pass, fill in shadow cache
      BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache = ss_descriptor;
 
      invalidate_stack_cache();
    }
    else {
      // SS selector is valid, else #TS(new stack segment)
      BX_ERROR(("task_switch(exception after commit point): SS NULL"));
      exception(BX_TS_EXCEPTION, raw_ss_selector & 0xfffc);
    }
 
    CPL = save_CPL;
 
    task_switch_load_selector(&BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS],
        &ds_selector, raw_ds_selector, cs_selector.rpl);
    task_switch_load_selector(&BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES],
        &es_selector, raw_es_selector, cs_selector.rpl);
    task_switch_load_selector(&BX_CPU_THIS_PTR sregs[BX_SEG_REG_FS],
        &fs_selector, raw_fs_selector, cs_selector.rpl);
    task_switch_load_selector(&BX_CPU_THIS_PTR sregs[BX_SEG_REG_GS],
        &gs_selector, raw_gs_selector, cs_selector.rpl);
 
    // if new selector is not null then perform following checks:
    //    index must be within its descriptor table limits else #TS(selector)
    //    AR byte must indicate data or readable code else #TS(selector)
    //    if data or non-conforming code then:
    //      DPL must be >= CPL else #TS(selector)
    //      DPL must be >= RPL else #TS(selector)
    //    AR byte must indicate PRESENT else #NP(selector)
    //    load cache with new segment descriptor and set valid bit
 
    // CS
    if ((raw_cs_selector & 0xfffc) != 0) {
      bx_bool good = fetch_raw_descriptor2(&cs_selector, &dword1, &dword2);
      if (!good) {
        BX_ERROR(("task_switch(exception after commit point): bad CS fetch"));
        exception(BX_TS_EXCEPTION, raw_cs_selector & 0xfffc);
      }
 
      parse_descriptor(dword1, dword2, &cs_descriptor);
 
      // CS descriptor AR byte must indicate code segment else #TS(CS)
      if (cs_descriptor.valid==0 || cs_descriptor.segment==0 ||
          IS_DATA_SEGMENT(cs_descriptor.type))
      {
        BX_ERROR(("task_switch(exception after commit point): CS not valid executable seg"));
        exception(BX_TS_EXCEPTION, raw_cs_selector & 0xfffc);
      }
 
      // if non-conforming then DPL must equal selector RPL else #TS(CS)
      if (IS_CODE_SEGMENT_NON_CONFORMING(cs_descriptor.type) &&
          cs_descriptor.dpl != cs_selector.rpl)
      {
        BX_ERROR(("task_switch(exception after commit point): non-conforming: CS.dpl!=CS.RPL"));
        exception(BX_TS_EXCEPTION, raw_cs_selector & 0xfffc);
      }
 
      // if conforming then DPL must be <= selector RPL else #TS(CS)
      if (IS_CODE_SEGMENT_CONFORMING(cs_descriptor.type) &&
          cs_descriptor.dpl > cs_selector.rpl)
      {
        BX_ERROR(("task_switch(exception after commit point): conforming: CS.dpl>RPL"));
        exception(BX_TS_EXCEPTION, raw_cs_selector & 0xfffc);
      }
 
      // Code segment is present in memory, else #NP(new code segment)
      if (! IS_PRESENT(cs_descriptor)) {
        BX_ERROR(("task_switch(exception after commit point): CS.p==0"));
        exception(BX_NP_EXCEPTION, raw_cs_selector & 0xfffc);
      }
 
      touch_segment(&cs_selector, &cs_descriptor);
 
#ifdef BX_SUPPORT_CS_LIMIT_DEMOTION
      // Handle special case of CS.LIMIT demotion (new descriptor limit is smaller than current one)
      if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled > cs_descriptor.u.segment.limit_scaled)
        BX_CPU_THIS_PTR iCache.flushICacheEntries();
#endif
 
      // All checks pass, fill in shadow cache
      BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache = cs_descriptor;
    }
    else {
      // If new cs selector is null #TS(CS)
      BX_ERROR(("task_switch(exception after commit point): CS NULL"));
      exception(BX_TS_EXCEPTION, raw_cs_selector & 0xfffc);
    }
 
    updateFetchModeMask(/* CS reloaded */);
 
#if BX_CPU_LEVEL >= 4
    handleAlignmentCheck(); // task switch, CPL was modified
#endif
  }
 
  if (tss_descriptor->type >= 9 && (trap_word & 0x1)) {
    BX_CPU_THIS_PTR debug_trap |= BX_DEBUG_TRAP_TASK_SWITCH_BIT; // BT flag
    BX_CPU_THIS_PTR async_event = 1; // so processor knows to check
    BX_INFO(("task_switch: T bit set in new TSS"));
  }
 
#if BX_CPU_LEVEL >= 6
  handleSseModeChange(); /* CR0.TS changes */
#if BX_SUPPORT_AVX
  handleAvxModeChange();
#endif
#endif
 
  //
  // Step 12: Begin execution of new task.
  //
  BX_DEBUG(("TASKING: LEAVE"));
 
  RSP_SPECULATIVE;
 
  // push error code onto stack
  if (push_error) {
    if (tss_descriptor->type >= 9) // TSS386
      push_32(error_code);
    else
      push_16(error_code);
  }
 
  // instruction pointer must be in CS limit, else #GP(0)
  if (EIP > BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled) {
    BX_ERROR(("task_switch: EIP > CS.limit"));
    exception(BX_GP_EXCEPTION, 0);
  }
 
  RSP_COMMIT;
}
 
void BX_CPU_C::task_switch_load_selector(bx_segment_reg_t *seg,
                 bx_selector_t *selector, Bit16u raw_selector, Bit8u cs_rpl)
{
  bx_descriptor_t descriptor;
  Bit32u dword1, dword2;
 
  // NULL selector is OK, will leave cache invalid
  if ((raw_selector & 0xfffc) != 0)
  {
    bx_bool good = fetch_raw_descriptor2(selector, &dword1, &dword2);
    if (!good) {
      BX_ERROR(("task_switch(%s): bad selector fetch !", strseg(seg)));
      exception(BX_TS_EXCEPTION, raw_selector & 0xfffc);
    }
 
    parse_descriptor(dword1, dword2, &descriptor);
 
    /* AR byte must indicate data or readable code segment else #TS(selector) */
    if (descriptor.segment==0 || (IS_CODE_SEGMENT(descriptor.type) &&
        IS_CODE_SEGMENT_READABLE(descriptor.type) == 0))
    {
      BX_ERROR(("task_switch(%s): not data or readable code !", strseg(seg)));
      exception(BX_TS_EXCEPTION, raw_selector & 0xfffc);
    }
 
    /* If data or non-conforming code, then both the RPL and the CPL
     * must be less than or equal to DPL in AR byte else #GP(selector) */
    if (IS_DATA_SEGMENT(descriptor.type) ||
        IS_CODE_SEGMENT_NON_CONFORMING(descriptor.type))
    {
      if ((selector->rpl > descriptor.dpl) || (cs_rpl > descriptor.dpl)) {
        BX_ERROR(("load_seg_reg(%s): RPL & CPL must be <= DPL", strseg(seg)));
        exception(BX_TS_EXCEPTION, raw_selector & 0xfffc);
      }
    }
 
    if (! IS_PRESENT(descriptor)) {
      BX_ERROR(("task_switch(%s): descriptor not present !", strseg(seg)));
      exception(BX_NP_EXCEPTION, raw_selector & 0xfffc);
    }
 
    touch_segment(selector, &descriptor);
 
    // All checks pass, fill in shadow cache
    seg->cache = descriptor;
  }
}
 
void BX_CPU_C::get_SS_ESP_from_TSS(unsigned pl, Bit16u *ss, Bit32u *esp)
{
  if (BX_CPU_THIS_PTR tr.cache.valid==0)
    BX_PANIC(("get_SS_ESP_from_TSS: TR.cache invalid"));
 
  if (BX_CPU_THIS_PTR tr.cache.type==BX_SYS_SEGMENT_AVAIL_386_TSS ||
      BX_CPU_THIS_PTR tr.cache.type==BX_SYS_SEGMENT_BUSY_386_TSS)
  {
    // 32-bit TSS
    Bit32u TSSstackaddr = 8*pl + 4;
    if ((TSSstackaddr+7) > BX_CPU_THIS_PTR tr.cache.u.segment.limit_scaled) {
      BX_DEBUG(("get_SS_ESP_from_TSS(386): TSSstackaddr > TSS.LIMIT"));
      exception(BX_TS_EXCEPTION, BX_CPU_THIS_PTR tr.selector.value & 0xfffc);
    }
    *ss  = system_read_word (BX_CPU_THIS_PTR tr.cache.u.segment.base + TSSstackaddr + 4);
    *esp = system_read_dword(BX_CPU_THIS_PTR tr.cache.u.segment.base + TSSstackaddr);
  }
  else if (BX_CPU_THIS_PTR tr.cache.type==BX_SYS_SEGMENT_AVAIL_286_TSS ||
           BX_CPU_THIS_PTR tr.cache.type==BX_SYS_SEGMENT_BUSY_286_TSS)
  {
    // 16-bit TSS
    Bit32u TSSstackaddr = 4*pl + 2;
    if ((TSSstackaddr+3) > BX_CPU_THIS_PTR tr.cache.u.segment.limit_scaled) {
      BX_DEBUG(("get_SS_ESP_from_TSS(286): TSSstackaddr > TSS.LIMIT"));
      exception(BX_TS_EXCEPTION, BX_CPU_THIS_PTR tr.selector.value & 0xfffc);
    }
    *ss  =          system_read_word(BX_CPU_THIS_PTR tr.cache.u.segment.base + TSSstackaddr + 2);
    *esp = (Bit32u) system_read_word(BX_CPU_THIS_PTR tr.cache.u.segment.base + TSSstackaddr);
  }
  else {
    BX_PANIC(("get_SS_ESP_from_TSS: TR is bogus type (%u)", (unsigned) BX_CPU_THIS_PTR tr.cache.type));
  }
}
 
#if BX_SUPPORT_X86_64
Bit64u BX_CPU_C::get_RSP_from_TSS(unsigned pl)
{
  if (BX_CPU_THIS_PTR tr.cache.valid==0)
    BX_PANIC(("get_RSP_from_TSS: TR.cache invalid"));
 
  // 32-bit TSS
  Bit32u TSSstackaddr = 8*pl + 4;
  if ((TSSstackaddr+7) > BX_CPU_THIS_PTR tr.cache.u.segment.limit_scaled) {
    BX_DEBUG(("get_RSP_from_TSS(): TSSstackaddr > TSS.LIMIT"));
    exception(BX_TS_EXCEPTION, BX_CPU_THIS_PTR tr.selector.value & 0xfffc);
  }
 
  Bit64u rsp = system_read_qword(BX_CPU_THIS_PTR tr.cache.u.segment.base + TSSstackaddr);
 
  if (! IsCanonical(rsp)) {
    BX_ERROR(("get_RSP_from_TSS: canonical address failure 0x%08x%08x", GET32H(rsp), GET32L(rsp)));
    exception(BX_SS_EXCEPTION, BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.value & 0xfffc);
  }
 
  return rsp;
}
#endif  // #if BX_SUPPORT_X86_64
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.