Subversion Repositories ao68000

#ifndef _M68KNOMMU_DELAY_H
#define _M68KNOMMU_DELAY_H
 
/*
 * Copyright (C) 1994 Hamish Macdonald
 * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com>
 */
 
#include <asm/param.h>
 
static inline void __delay(unsigned long loops)
{
#if defined(CONFIG_COLDFIRE)
	/* The coldfire runs this loop at significantly different speeds
	 * depending upon long word alignment or not.  We'll pad it to
	 * long word alignment which is the faster version.
	 * The 0x4a8e is of course a 'tstl %fp' instruction.  This is better
	 * than using a NOP (0x4e71) instruction because it executes in one
	 * cycle not three and doesn't allow for an arbitary delay waiting
	 * for bus cycles to finish.  Also fp/a6 isn't likely to cause a
	 * stall waiting for the register to become valid if such is added
	 * to the coldfire at some stage.
	 */
	__asm__ __volatile__ (	".balignw 4, 0x4a8e\n\t"
				"1: subql #1, %0\n\t"
				"jcc 1b"
		: "=d" (loops) : "0" (loops));
#else
	__asm__ __volatile__ (	"1: subql #1, %0\n\t"
				"jcc 1b"
		: "=d" (loops) : "0" (loops));
#endif
}
 
/*
 *	Ideally we use a 32*32->64 multiply to calculate the number of
 *	loop iterations, but the older standard 68k and ColdFire do not
 *	have this instruction. So for them we have a clsoe approximation
 *	loop using 32*32->32 multiplies only. This calculation based on
 *	the ARM version of delay.
 *
 *	We want to implement:
 *
 *	loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32
 */
 
#define	HZSCALE		(268435456 / (1000000/HZ))
 
extern unsigned long loops_per_jiffy;
 
static inline void _udelay(unsigned long usecs)
{
#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \
    defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \
    defined(CONFIG_COLDFIRE) || defined(CONFIG_AO68000)
	__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
#else
	unsigned long tmp;
 
	usecs *= 4295;		/* 2**32 / 1000000 */
	__asm__ ("mulul %2,%0:%1"
		: "=d" (usecs), "=d" (tmp)
		: "d" (usecs), "1" (loops_per_jiffy*HZ));
	__delay(usecs);
#endif
}
 
/*
 *	Moved the udelay() function into library code, no longer inlined.
 *	I had to change the algorithm because we are overflowing now on
 *	the faster ColdFire parts. The code is a little bigger, so it makes
 *	sense to library it.
 */
extern void udelay(unsigned long usecs);
 
#endif /* defined(_M68KNOMMU_DELAY_H) */