Subversion Repositories apbi2c

//////////////////////////////////////////////////////////////////
////
////
//// 	FIFO BLOCK to I2C Core
////
////
////
//// This file is part of the APB to I2C project
////
//// http://www.opencores.org/cores/apbi2c/
////
////
////
//// Description
////
//// Implementation of APB IP core according to
////
//// apbi2c_spec IP core specification document.
////
////
////
//// To Do: This block inst functional yet when you try only write half registers and it didnt go correctly FULL and EMPTY
////
////
////
////
////
//// Author(s): - Felipe Fernandes Da Costa, fefe2560@gmail.com
////		  Ronal Dario Celaya
////
///////////////////////////////////////////////////////////////// 
////
////
//// Copyright (C) 2009 Authors and OPENCORES.ORG
////
////
////
//// This source file may be used and distributed without
////
//// restriction provided that this copyright statement is not
////
//// removed from the file and that any derivative work contains
//// the original copyright notice and the associated disclaimer.
////
////
//// This source file is free software; you can redistribute it
////
//// and/or modify it under the terms of the GNU Lesser General
////
//// Public License as published by the Free Software Foundation;
//// either version 2.1 of the License, or (at your option) any
////
//// later version.
////
////
////
//// This source is distributed in the hope that it will be
////
//// useful, but WITHOUT ANY WARRANTY; without even the implied
////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
////
//// PURPOSE. See the GNU Lesser General Public License for more
//// details.
////
////
////
//// You should have received a copy of the GNU Lesser General
////
//// Public License along with this source; if not, download it
////
//// from http://www.opencores.org/lgpl.shtml
////
////
///////////////////////////////////////////////////////////////////
module fifo
#(
	parameter integer DWIDTH = 32,
	parameter integer AWIDTH = 4
)
 
(
	input clock, reset, wr_en, rd_en,
	input [DWIDTH-1:0] data_in,
	output f_full, f_empty,
	output [DWIDTH-1:0] data_out
);
 
 
	reg [DWIDTH-1:0] mem [0:2**AWIDTH-1];
 
	reg [AWIDTH-1:0] wr_ptr;
	reg [AWIDTH-1:0] rd_ptr;
 
	reg last_was_write;
 
	always @ (posedge clock)
		if (reset)
		//SYNCHRONOUS RESET
		begin
		rd_ptr <= {AWIDTH{1'b0}};
		wr_ptr <= {AWIDTH{1'b0}};
		last_was_write <= 1'b1;
		// NONBLOCKING
		end
		else
		begin
		if (wr_en )//WRITE OPERATION
		begin
			mem[wr_ptr] <= data_in; //WRITE TO ARRAY
			wr_ptr <= wr_ptr + 11'd1;
 
			if(wr_ptr == {AWIDTH{1'b1}})
			begin
				last_was_write <= 1'b0; 
			end
 
			rd_ptr <= {AWIDTH{1'b0}};//POINTER GOES TO INITIAL ADDRESSS
 
		end
		else if (rd_en)// READ OPERATION
		begin
 
			rd_ptr <= rd_ptr + 11'd1;
 
			if(rd_ptr == {AWIDTH{1'b1}})//SIGNAL USED TO NOTICE I2C FIFO IS EMPTY
			begin
				last_was_write <= 1'b1;
				wr_ptr <= {AWIDTH{1'b0}};//POINTER GOES TO INITIAL ADDRESSS
			end
			else if(wr_ptr != {AWIDTH{1'b0}} && wr_ptr == rd_ptr )//HALF FULL EMPTY CONDITION
			begin
				last_was_write <= 1'b1;
				wr_ptr <= {AWIDTH{1'b0}};//POINTER GOES TO INITIAL ADDRESSS
			end
 
 
 
		end 
		else if(wr_ptr != rd_ptr && !wr_en)//THIS INST TESTED YET
		begin
			last_was_write <= 1'b0;
		end
 
		end
 
 
	assign f_full = (!last_was_write)? 1'b1:1'b0;
	assign f_empty = (last_was_write)? 1'b1:1'b0;
	assign data_out = mem[rd_ptr];//WRITE ON OUTPUT
 
endmodule