Subversion Repositories apbi2c

//////////////////////////////////////////////////////////////////
////
////
//// 	TOP I2C BLOCK to I2C Core
////
////
////
//// This file is part of the APB to I2C project
////
//// http://www.opencores.org/cores/apbi2c/
////
////
////
//// Description
////
//// Implementation of APB IP core according to
////
//// apbi2c_spec IP core specification document.
////
////
////
//// To Do: Things are right here but always all block can suffer changes
////
////
////
////
////
//// Author(s): - Felipe Fernandes Da Costa, fefe2560@gmail.com
////		  Ronal Dario Celaya
////
///////////////////////////////////////////////////////////////// 
////
////
//// Copyright (C) 2009 Authors and OPENCORES.ORG
////
////
////
//// This source file may be used and distributed without
////
//// restriction provided that this copyright statement is not
////
//// removed from the file and that any derivative work contains
//// the original copyright notice and the associated disclaimer.
////
////
//// This source file is free software; you can redistribute it
////
//// and/or modify it under the terms of the GNU Lesser General
////
//// Public License as published by the Free Software Foundation;
//// either version 2.1 of the License, or (at your option) any
////
//// later version.
////
////
////
//// This source is distributed in the hope that it will be
////
//// useful, but WITHOUT ANY WARRANTY; without even the implied
////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
////
//// PURPOSE. See the GNU Lesser General Public License for more
//// details.
////
////
////
//// You should have received a copy of the GNU Lesser General
////
//// Public License along with this source; if not, download it
////
//// from http://www.opencores.org/lgpl.shtml
////
////
///////////////////////////////////////////////////////////////////
 
`timescale 1ns/1ps //timescale 
 
module i2c(
	//APB PORTS
	input PCLK,
	input PRESETn,
	input [31:0] PADDR,
	input [31:0] PWDATA,
	input PWRITE,
	input PSELx,
	input PENABLE,
	output PREADY,
	output PSLVERR,
	output INT_RX,
	output INT_TX,
	output [31:0] PRDATA,
	//I2C OUTPUT
	inout SDA,
	inout SCL
 
	  );
 
	wire RESET_N;
 
	//THIS IS USED TO RESET FIFO
	assign RESET_N = (PRESETn == 0)?1'b1:1'b0;	
 
	//WIRES USED TO CONECT BLOCK WITH EACH OTHER
	wire TX_RD_EN;
	wire TX_F_EMPTY;
	wire TX_F_FULL;
	wire [31:0] TX_DATA_IN;
	wire [31:0] TX_DATA_OUT;
	wire TX_WRITE_ENA;
 
	wire RX_RD_EN;
	wire RX_F_EMPTY;
	wire RX_F_FULL;
	wire [31:0] RX_DATA_IN;
	wire [31:0] RX_DATA_OUT;
	wire RX_WRITE_ENA;
 
 
	wire [13:0] REGISTER_CONFIG;
 
 
	wire error;
	wire tx_empty;
	wire rx_empty;
 
	//CONECTIONS WITH FIFO TX
	fifo DUT_FIFO_TX (
				.clock(PCLK),
				.reset(RESET_N),
				.wr_en(TX_WRITE_ENA), 
				.rd_en(TX_RD_EN),
				.data_in(TX_DATA_IN),
				.f_full(TX_F_FULL), 
				.f_empty(TX_F_EMPTY),
				.data_out(TX_DATA_OUT)
 
		         );
 
	//CONECTIONS WITH FIFO RX
	fifo DUT_FIFO_RX (
				.clock(PCLK),
				.reset(RESET_N),
				.wr_en(RX_WRITE_ENA), 
				.rd_en(RX_RD_EN),
				.data_in(RX_DATA_IN),
				.f_full(RX_F_FULL), 
				.f_empty(RX_F_EMPTY),
				.data_out(RX_DATA_OUT)
		         );
 
	//CONECTIONS WITH APB AND ALL BLOCKS WHERE IS TWO FIFOS AND I2C CORE
	apb DUT_APB (
 
			.PCLK(PCLK),
			.PRESETn(PRESETn),
                        .PADDR(PADDR),
			.PRDATA(PRDATA),
			.PWDATA(PWDATA),
			.PWRITE(PWRITE),
			.PSELx(PSELx),
			.PENABLE(PENABLE),
			.PREADY(PREADY),
			.PSLVERR(PSLVERR),
			.READ_DATA_ON_RX(RX_DATA_OUT),
			.INTERNAL_I2C_REGISTER_CONFIG(REGISTER_CONFIG),
			.INT_RX(INT_RX),
			.WR_ENA(TX_WRITE_ENA),
			.WRITE_DATA_ON_TX(TX_DATA_IN),
			.RD_ENA(RX_RD_EN),
			.INT_TX(INT_TX),
			.TX_EMPTY(tx_empty),
			.RX_EMPTY(rx_empty),
			.ERROR(error)
 
		     );
 
	//I2C CORE BLOCK WITH ALL ANOTHER BLOCKS
	module_i2c DUT_I2C_INTERNAL (
				  	.PCLK(PCLK),
					.PRESETn(PRESETn),
					.fifo_tx_rd_en(TX_RD_EN),
					.fifo_tx_f_full(TX_F_FULL),
					.fifo_tx_f_empty(TX_F_EMPTY),
					.fifo_tx_data_out(TX_DATA_OUT),
					.fifo_rx_wr_en(RX_WRITE_ENA),
					.fifo_rx_f_empty(RX_F_EMPTY),
					.fifo_rx_data_in(RX_DATA_IN),
					.fifo_rx_f_full(RX_F_FULL),
					.DATA_CONFIG_REG(REGISTER_CONFIG),
					.TX_EMPTY(tx_empty),
					.RX_EMPTY(rx_empty),
					.ERROR(error),
					.SDA(SDA),
					.SCL(SCL)
				    );
endmodule