URL
https://opencores.org/ocsvn/async_sdm_noc/async_sdm_noc/trunk
Subversion Repositories async_sdm_noc
[/] [async_sdm_noc/] [branches/] [init/] [sdm/] [src/] [sdm_sch.v] - Rev 45
Go to most recent revision | Compare with Previous | Blame | View Log
/* Asynchronous SDM NoC (C)2011 Wei Song Advanced Processor Technologies Group Computer Science, the Univ. of Manchester, UK Authors: Wei Song wsong83@gmail.com License: LGPL 3.0 or later Crossbar based SDM switch allocator *** SystemVerilog is used *** References For the detail structure, please refer to Section 6.3.1 of the thesis: Wei Song, Spatial parallelism in the routers of asynchronous on-chip networks, PhD thesis, the University of Manchester, 2011. History: 28/09/2009 Initial version. <wsong83@gmail.com> 27/05/2011 Clean up for opensource. <wsong83@gmail.com> */ // the router structure definitions `include "define.v" module sdm_sch (/*AUTOARG*/ // Outputs sack, wack, nack, eack, lack, scfg, ncfg, wcfg, ecfg, lcfg, // Inputs sreq, nreq, lreq, wreq, ereq, rst_n ); parameter VCN = 2; // the number of virtual circuits per port // income requests input [VCN-1:0][3:0] sreq, nreq, lreq; input [VCN-1:0][1:0] wreq, ereq; // ack to input buffers output [VCN-1:0] sack, wack, nack, eack, lack; // configuration to the crossbar output [VCN-1:0][1:0][VCN-1:0] scfg, ncfg; output [VCN-1:0][3:0][VCN-1:0] wcfg, ecfg, lcfg; input rst_n; // active low global reset // requests to arbiters `ifndef ENABLE_MRMA wire [1:0][VCN-1:0][VCN-1:0] r2s, r2n; // shuffle the incoming request signals wire [3:0][VCN-1:0][VCN-1:0] r2w, r2e, r2l; `else wire [1:0][VCN-1:0] r2s, r2n; // shuffle the incoming request signals wire [3:0][VCN-1:0] r2w, r2e, r2l; `endif // ack from arbiters wire [VCN-1:0][3:0] a2s, a2n, a2l; wire [VCN-1:0][1:0] a2w, a2e; // ack of the arbiters wire [1:0][VCN-1:0] r2sa, r2na; wire [3:0][VCN-1:0] r2wa, r2ea, r2la; `ifdef ENABLE_MRMA wire [VCN:0] OPrst_n; // the buffered resets to avoid metastability wire [VCN-1:0] SOPrdy, SOPblk; // OP ready and blocked status wire [VCN-1:0] WOPrdy, WOPblk; // OP ready and blocked status wire [VCN-1:0] NOPrdy, NOPblk; // OP ready and blocked status wire [VCN-1:0] EOPrdy, EOPblk; // OP ready and blocked status wire [VCN-1:0] LOPrdy, LOPblk; // OP ready and blocked status `endif genvar i,j; // wire shuffle generate for(i=0; i<VCN; i++) begin: SHUF `ifndef ENABLE_MRMA for(j=0; j<VCN; j++) begin: CO assign r2s[0][i][j] = nreq[i][0]; assign r2s[1][i][j] = lreq[i][0]; assign r2w[0][i][j] = sreq[i][0]; assign r2w[1][i][j] = nreq[i][1]; assign r2w[2][i][j] = ereq[i][0]; assign r2w[3][i][j] = lreq[i][1]; assign r2n[0][i][j] = sreq[i][1]; assign r2n[1][i][j] = lreq[i][2]; assign r2e[0][i][j] = sreq[i][2]; assign r2e[1][i][j] = wreq[i][0]; assign r2e[2][i][j] = nreq[i][2]; assign r2e[3][i][j] = lreq[i][3]; assign r2l[0][i][j] = sreq[i][3]; assign r2l[1][i][j] = wreq[i][1]; assign r2l[2][i][j] = nreq[i][3]; assign r2l[3][i][j] = ereq[i][1]; end // block: CO `else // !`ifndef ENABLE_MRMA assign r2s[0][i] = nreq[i][0]; assign r2s[1][i] = lreq[i][0]; assign r2w[0][i] = sreq[i][0]; assign r2w[1][i] = nreq[i][1]; assign r2w[2][i] = ereq[i][0]; assign r2w[3][i] = lreq[i][1]; assign r2n[0][i] = sreq[i][1]; assign r2n[1][i] = lreq[i][2]; assign r2e[0][i] = sreq[i][2]; assign r2e[1][i] = wreq[i][0]; assign r2e[2][i] = nreq[i][2]; assign r2e[3][i] = lreq[i][3]; assign r2l[0][i] = sreq[i][3]; assign r2l[1][i] = wreq[i][1]; assign r2l[2][i] = nreq[i][3]; assign r2l[3][i] = ereq[i][1]; `endif // !`ifndef ENABLE_MRMA assign a2s[i][0] = r2wa[0][i]; assign a2s[i][1] = r2na[0][i]; assign a2s[i][2] = r2ea[0][i]; assign a2s[i][3] = r2la[0][i]; assign a2w[i][0] = r2ea[1][i]; assign a2w[i][1] = r2la[1][i]; assign a2n[i][0] = r2sa[0][i]; assign a2n[i][1] = r2wa[1][i]; assign a2n[i][2] = r2ea[2][i]; assign a2n[i][3] = r2la[2][i]; assign a2e[i][0] = r2wa[2][i]; assign a2e[i][1] = r2la[3][i]; assign a2l[i][0] = r2sa[1][i]; assign a2l[i][1] = r2wa[3][i]; assign a2l[i][2] = r2na[1][i]; assign a2l[i][3] = r2ea[3][i]; assign sack[i] = |a2s[i]; assign wack[i] = |a2w[i]; assign nack[i] = |a2n[i]; assign eack[i] = |a2e[i]; assign lack[i] = |a2l[i]; end // block: SHUF endgenerate // output port arbiter/allocators `ifndef ENABLE_MRMA mnma #(.N(2*VCN), .M(VCN)) SCBA ( .r ( r2s ), .ra ( r2sa ), .cfg ( scfg ) ); mnma #(.N(4*VCN), .M(VCN)) WCBA ( .r ( r2w ), .ra ( r2wa ), .cfg ( wcfg ) ); mnma #(.N(2*VCN), .M(VCN)) NCBA ( .r ( r2n ), .ra ( r2na ), .cfg ( ncfg ) ); mnma #(.N(4*VCN), .M(VCN)) ECBA ( .r ( r2e ), .ra ( r2ea ), .cfg ( ecfg ) ); mnma #(.N(4*VCN), .M(VCN)) LCBA ( .r ( r2l ), .ra ( r2la ), .cfg ( lcfg ) ); `else // !`ifndef ENABLE_MRMA mrma #(.N(2*VCN), .M(VCN)) SCBA ( .ca ( r2sa ), .ra ( SOPblk ), .cfg ( scfg ), .c ( r2s ), .r ( SOPrdy ), .rst_n ( rst_n ) ); mrma #(.N(4*VCN), .M(VCN)) WCBA ( .ca ( r2wa ), .ra ( WOPblk ), .cfg ( wcfg ), .c ( r2w ), .r ( WOPrdy ), .rst_n ( rst_n ) ); mrma #(.N(2*VCN), .M(VCN)) NCBA ( .ca ( r2na ), .ra ( NOPblk ), .cfg ( ncfg ), .c ( r2n ), .r ( NOPrdy ), .rst_n ( rst_n ) ); mrma #(.N(4*VCN), .M(VCN)) ECBA ( .ca ( r2ea ), .ra ( EOPblk ), .cfg ( ecfg ), .c ( r2e ), .r ( EOPrdy ), .rst_n ( rst_n ) ); mrma #(.N(4*VCN), .M(VCN)) LCBA ( .ca ( r2la ), .ra ( LOPblk ), .cfg ( lcfg ), .c ( r2l ), .r ( LOPrdy ), .rst_n ( rst_n ) ); generate for(i=0; i<VCN; i++) begin: OPC delay DLY ( .q(OPrst_n[i+1]), .a(OPrst_n[i])); // dont touch assign SOPrdy[i] = (~SOPblk[i])&OPrst_n[i+1]; assign WOPrdy[i] = (~WOPblk[i])&OPrst_n[i+1]; assign NOPrdy[i] = (~NOPblk[i])&OPrst_n[i+1]; assign EOPrdy[i] = (~EOPblk[i])&OPrst_n[i+1]; assign LOPrdy[i] = (~LOPblk[i])&OPrst_n[i+1]; end endgenerate assign OPrst_n[0] = rst_n; `endif // !`ifndef ENABLE_MRMA endmodule // sdm_sch
Go to most recent revision | Compare with Previous | Blame | View Log