URL
https://opencores.org/ocsvn/async_sdm_noc/async_sdm_noc/trunk
Subversion Repositories async_sdm_noc
[/] [async_sdm_noc/] [trunk/] [lib/] [NangateOpenCellLibrary_typical_conditional.v] - Rev 28
Go to most recent revision | Compare with Previous | Blame | View Log
// // ****************************************************************************** // * * // * Copyright (C) 2004-2009, Nangate Inc. * // * All rights reserved. * // * * // * Nangate and the Nangate logo are trademarks of Nangate Inc. * // * * // * All trademarks, logos, software marks, and trade names (collectively the * // * "Marks") in this program are proprietary to Nangate or other respective * // * owners that have granted Nangate the right and license to use such Marks. * // * You are not permitted to use the Marks without the prior written consent * // * of Nangate or such third party that may own the Marks. * // * * // * This file has been provided pursuant to a License Agreement containing * // * restrictions on its use. This file contains valuable trade secrets and * // * proprietary information of Nangate Inc., and is protected by U.S. and * // * international laws and/or treaties. * // * * // * The copyright notice(s) in this file does not indicate actual or intended * // * publication of this file. * // * * // * NGLibraryCharacterizer, v2009.07-HR28-2009-07-08 - build 200907162109 * // * * // ****************************************************************************** module AND2_X1 (A1, A2, ZN); input A1; input A2; output ZN; and(ZN, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); endspecify endmodule module AND2_X2 (A1, A2, ZN); input A1; input A2; output ZN; and(ZN, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); endspecify endmodule module AND2_X4 (A1, A2, ZN); input A1; input A2; output ZN; and(ZN, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); endspecify endmodule module AND3_X1 (A1, A2, A3, ZN); input A1; input A2; input A3; output ZN; and(ZN, i_66, A3); and(i_66, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); endspecify endmodule module AND3_X2 (A1, A2, A3, ZN); input A1; input A2; input A3; output ZN; and(ZN, i_66, A3); and(i_66, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); endspecify endmodule module AND3_X4 (A1, A2, A3, ZN); input A1; input A2; input A3; output ZN; and(ZN, i_46, A3); and(i_46, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); endspecify endmodule module AND4_X1 (A1, A2, A3, A4, ZN); input A1; input A2; input A3; input A4; output ZN; and(ZN, i_12, A4); and(i_12, i_13, A3); and(i_13, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); (A4 => ZN) = (0.1, 0.1); endspecify endmodule module AND4_X2 (A1, A2, A3, A4, ZN); input A1; input A2; input A3; input A4; output ZN; and(ZN, i_12, A4); and(i_12, i_13, A3); and(i_13, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); (A4 => ZN) = (0.1, 0.1); endspecify endmodule module AND4_X4 (A1, A2, A3, A4, ZN); input A1; input A2; input A3; input A4; output ZN; and(ZN, i_12, A4); and(i_12, i_13, A3); and(i_13, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); (A4 => ZN) = (0.1, 0.1); endspecify endmodule module ANTENNA_X1 (A); input A; endmodule module AOI211_X1 (A, B, C1, C2, ZN); input A; input B; input C1; input C2; output ZN; not(ZN, i_18); or(i_18, i_19, A); or(i_19, i_20, B); and(i_20, C1, C2); specify if((B == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B => ZN) = (0.1, 0.1); if((A == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0)) (B => ZN) = (0.1, 0.1); if((A == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B => ZN) = (0.1, 0.1); (C1 => ZN) = (0.1, 0.1); (C2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI211_X2 (A, B, C1, C2, ZN); input A; input B; input C1; input C2; output ZN; not(ZN, i_18); or(i_18, i_19, A); or(i_19, i_20, B); and(i_20, C1, C2); specify if((B == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B => ZN) = (0.1, 0.1); if((A == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0)) (B => ZN) = (0.1, 0.1); if((A == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B => ZN) = (0.1, 0.1); (C1 => ZN) = (0.1, 0.1); (C2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI211_X4 (A, B, C1, C2, ZN); input A; input B; input C1; input C2; output ZN; not(ZN, i_18); or(i_18, i_19, A); or(i_19, i_20, B); and(i_20, C1, C2); specify if((B == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B => ZN) = (0.1, 0.1); if((A == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0)) (B => ZN) = (0.1, 0.1); if((A == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B => ZN) = (0.1, 0.1); (C1 => ZN) = (0.1, 0.1); (C2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI21_X1 (A, B1, B2, ZN); input A; input B1; input B2; output ZN; not(ZN, i_12); or(i_12, A, i_13); and(i_13, B1, B2); specify if((B1 == 1'b1) && (B2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b0)) (A => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI21_X2 (A, B1, B2, ZN); input A; input B1; input B2; output ZN; not(ZN, i_52); or(i_52, A, i_53); and(i_53, B1, B2); specify if((B1 == 1'b1) && (B2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b0)) (A => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI21_X4 (A, B1, B2, ZN); input A; input B1; input B2; output ZN; not(ZN, i_52); or(i_52, A, i_53); and(i_53, B1, B2); specify if((B1 == 1'b1) && (B2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b0)) (A => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI221_X1 (A, B1, B2, C1, C2, ZN); input A; input B1; input B2; input C1; input C2; output ZN; not(ZN, i_24); or(i_24, i_25, i_27); or(i_25, i_26, A); and(i_26, C1, C2); and(i_27, B1, B2); specify (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0) || (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b0) || (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI221_X2 (A, B1, B2, C1, C2, ZN); input A; input B1; input B2; input C1; input C2; output ZN; not(ZN, i_24); or(i_24, i_25, i_27); or(i_25, i_26, A); and(i_26, C1, C2); and(i_27, B1, B2); specify (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0) || (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b0) || (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) || (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI221_X4 (A, B1, B2, C1, C2, ZN); input A; input B1; input B2; input C1; input C2; output ZN; not(ZN, i_24); or(i_24, i_25, i_27); or(i_25, i_26, A); and(i_26, C1, C2); and(i_27, B1, B2); specify (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) || (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0) || (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI222_X1 (A1, A2, B1, B2, C1, C2, ZN); input A1; input A2; input B1; input B2; input C1; input C2; output ZN; not(ZN, i_30); or(i_30, i_31, i_34); or(i_31, i_32, i_33); and(i_32, A1, A2); and(i_33, B1, B2); and(i_34, C1, C2); specify (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0) || (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b0) || (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b0)) (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); (C1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI222_X2 (A1, A2, B1, B2, C1, C2, ZN); input A1; input A2; input B1; input B2; input C1; input C2; output ZN; not(ZN, i_30); or(i_30, i_31, i_34); or(i_31, i_32, i_33); and(i_32, A1, A2); and(i_33, B1, B2); and(i_34, C1, C2); specify (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0) || (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b0) || (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b0)) (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0)) (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); (C2 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI222_X4 (A1, A2, B1, B2, C1, C2, ZN); input A1; input A2; input B1; input B2; input C1; input C2; output ZN; not(ZN, i_30); or(i_30, i_31, i_34); or(i_31, i_32, i_33); and(i_32, A1, A2); and(i_33, B1, B2); and(i_34, C1, C2); specify (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0) || (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0) || (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0)) (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b0)) (B2 => ZN) = (0.1, 0.1); (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b1) || (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b0) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1)) (C1 => ZN) = (0.1, 0.1); (C2 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1)) (C2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI22_X1 (A1, A2, B1, B2, ZN); input A1; input A2; input B1; input B2; output ZN; not(ZN, i_18); or(i_18, i_19, i_20); and(i_19, A1, A2); and(i_20, B1, B2); specify if((A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b0) && (B2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b1)) (B2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI22_X2 (A1, A2, B1, B2, ZN); input A1; input A2; input B1; input B2; output ZN; not(ZN, i_18); or(i_18, i_19, i_20); and(i_19, A1, A2); and(i_20, B1, B2); specify if((A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b0) && (B2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b1)) (B2 => ZN) = (0.1, 0.1); endspecify endmodule module AOI22_X4 (A1, A2, B1, B2, ZN); input A1; input A2; input B1; input B2; output ZN; not(ZN, i_18); or(i_18, i_19, i_20); and(i_19, A1, A2); and(i_20, B1, B2); specify if((A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b0) && (B2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b1)) (B2 => ZN) = (0.1, 0.1); endspecify endmodule module BUF_X1 (A, Z); input A; output Z; buf(Z, A); specify (A => Z) = (0.1, 0.1); endspecify endmodule module BUF_X16 (A, Z); input A; output Z; buf(Z, A); specify (A => Z) = (0.1, 0.1); endspecify endmodule module BUF_X2 (A, Z); input A; output Z; buf(Z, A); specify (A => Z) = (0.1, 0.1); endspecify endmodule module BUF_X32 (A, Z); input A; output Z; buf(Z, A); specify (A => Z) = (0.1, 0.1); endspecify endmodule module BUF_X4 (A, Z); input A; output Z; buf(Z, A); specify (A => Z) = (0.1, 0.1); endspecify endmodule module BUF_X8 (A, Z); input A; output Z; buf(Z, A); specify (A => Z) = (0.1, 0.1); endspecify endmodule module CLKBUF_X1 (A, Z); input A; output Z; buf(Z, A); specify (A => Z) = (0.1, 0.1); endspecify endmodule module CLKBUF_X2 (A, Z); input A; output Z; buf(Z, A); specify (A => Z) = (0.1, 0.1); endspecify endmodule module CLKBUF_X3 (A, Z); input A; output Z; buf(Z, A); specify (A => Z) = (0.1, 0.1); endspecify endmodule primitive seq3 (IQ, nextstate, CK, NOTIFIER); output IQ; input nextstate; input CK; input NOTIFIER; reg IQ; table // nextstate CK NOTIFIER : @IQ : IQ 0 0 ? : ? : 0; 1 0 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 1 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module CLKGATETST_X1 (CK, E, SE, GCK); input CK; input E; input SE; output GCK; reg NOTIFIER; and(GCK, IQ, CK); seq3(IQ, nextstate, CK, NOTIFIER); not(IQn, IQ); or(nextstate, E, SE); specify (CK => GCK) = (0.1, 0.1); $width(negedge CK, 0.1, 0, NOTIFIER); $width(posedge CK, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge E, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge E, 0.1, 0.1, NOTIFIER); $width(negedge E, 0.1, 0, NOTIFIER); $width(posedge E, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SE, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SE, 0.1, 0.1, NOTIFIER); $width(negedge SE, 0.1, 0, NOTIFIER); $width(posedge SE, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, CK, NOTIFIER); output IQ; input nextstate; input CK; input NOTIFIER; reg IQ; table // nextstate CK NOTIFIER : @IQ : IQ 0 0 ? : ? : 0; 1 0 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 1 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module CLKGATETST_X2 (CK, E, SE, GCK); input CK; input E; input SE; output GCK; reg NOTIFIER; and(GCK, IQ, CK); seq3(IQ, nextstate, CK, NOTIFIER); not(IQn, IQ); or(nextstate, E, SE); specify (CK => GCK) = (0.1, 0.1); $width(negedge CK, 0.1, 0, NOTIFIER); $width(posedge CK, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge E, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge E, 0.1, 0.1, NOTIFIER); $width(negedge E, 0.1, 0, NOTIFIER); $width(posedge E, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SE, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SE, 0.1, 0.1, NOTIFIER); $width(negedge SE, 0.1, 0, NOTIFIER); $width(posedge SE, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, CK, NOTIFIER); output IQ; input nextstate; input CK; input NOTIFIER; reg IQ; table // nextstate CK NOTIFIER : @IQ : IQ 0 0 ? : ? : 0; 1 0 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 1 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module CLKGATETST_X4 (CK, E, SE, GCK); input CK; input E; input SE; output GCK; reg NOTIFIER; and(GCK, IQ, CK); seq3(IQ, nextstate, CK, NOTIFIER); not(IQn, IQ); or(nextstate, E, SE); specify (CK => GCK) = (0.1, 0.1); $width(negedge CK, 0.1, 0, NOTIFIER); $width(posedge CK, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge E, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge E, 0.1, 0.1, NOTIFIER); $width(negedge E, 0.1, 0, NOTIFIER); $width(posedge E, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SE, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SE, 0.1, 0.1, NOTIFIER); $width(negedge SE, 0.1, 0, NOTIFIER); $width(posedge SE, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, CK, NOTIFIER); output IQ; input nextstate; input CK; input NOTIFIER; reg IQ; table // nextstate CK NOTIFIER : @IQ : IQ 0 0 ? : ? : 0; 1 0 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 1 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module CLKGATETST_X8 (CK, E, SE, GCK); input CK; input E; input SE; output GCK; reg NOTIFIER; and(GCK, IQ, CK); seq3(IQ, nextstate, CK, NOTIFIER); not(IQn, IQ); or(nextstate, E, SE); specify (CK => GCK) = (0.1, 0.1); $width(negedge CK, 0.1, 0, NOTIFIER); $width(posedge CK, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge E, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge E, 0.1, 0.1, NOTIFIER); $width(negedge E, 0.1, 0, NOTIFIER); $width(posedge E, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SE, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SE, 0.1, 0.1, NOTIFIER); $width(negedge SE, 0.1, 0, NOTIFIER); $width(posedge SE, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, CK, NOTIFIER); output IQ; input nextstate; input CK; input NOTIFIER; reg IQ; table // nextstate CK NOTIFIER : @IQ : IQ 0 0 ? : ? : 0; 1 0 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 1 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module CLKGATE_X1 (CK, E, GCK); input CK; input E; output GCK; reg NOTIFIER; and(GCK, CK, IQ); seq3(IQ, nextstate, CK, NOTIFIER); not(IQn, IQ); buf(nextstate, E); specify (CK => GCK) = (0.1, 0.1); $width(negedge CK, 0.1, 0, NOTIFIER); $width(posedge CK, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge E, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge E, 0.1, 0.1, NOTIFIER); $width(negedge E, 0.1, 0, NOTIFIER); $width(posedge E, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, CK, NOTIFIER); output IQ; input nextstate; input CK; input NOTIFIER; reg IQ; table // nextstate CK NOTIFIER : @IQ : IQ 0 0 ? : ? : 0; 1 0 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 1 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module CLKGATE_X2 (CK, E, GCK); input CK; input E; output GCK; reg NOTIFIER; and(GCK, CK, IQ); seq3(IQ, nextstate, CK, NOTIFIER); not(IQn, IQ); buf(nextstate, E); specify (CK => GCK) = (0.1, 0.1); $width(negedge CK, 0.1, 0, NOTIFIER); $width(posedge CK, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge E, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge E, 0.1, 0.1, NOTIFIER); $width(negedge E, 0.1, 0, NOTIFIER); $width(posedge E, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, CK, NOTIFIER); output IQ; input nextstate; input CK; input NOTIFIER; reg IQ; table // nextstate CK NOTIFIER : @IQ : IQ 0 0 ? : ? : 0; 1 0 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 1 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module CLKGATE_X4 (CK, E, GCK); input CK; input E; output GCK; reg NOTIFIER; and(GCK, CK, IQ); seq3(IQ, nextstate, CK, NOTIFIER); not(IQn, IQ); buf(nextstate, E); specify (CK => GCK) = (0.1, 0.1); $width(negedge CK, 0.1, 0, NOTIFIER); $width(posedge CK, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge E, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge E, 0.1, 0.1, NOTIFIER); $width(negedge E, 0.1, 0, NOTIFIER); $width(posedge E, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, CK, NOTIFIER); output IQ; input nextstate; input CK; input NOTIFIER; reg IQ; table // nextstate CK NOTIFIER : @IQ : IQ 0 0 ? : ? : 0; 1 0 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 1 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module CLKGATE_X8 (CK, E, GCK); input CK; input E; output GCK; reg NOTIFIER; and(GCK, CK, IQ); seq3(IQ, nextstate, CK, NOTIFIER); not(IQn, IQ); buf(nextstate, E); specify (CK => GCK) = (0.1, 0.1); $width(negedge CK, 0.1, 0, NOTIFIER); $width(posedge CK, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge E, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge E, 0.1, 0.1, NOTIFIER); $width(negedge E, 0.1, 0, NOTIFIER); $width(posedge E, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, SN, RN, nextstate, CK, NOTIFIER); output IQ; input SN; input RN; input nextstate; input CK; input NOTIFIER; reg IQ; table // SN RN nextstate CK NOTIFIER : @IQ : IQ 1 ? 0 r ? : ? : 0; ? 1 1 r ? : ? : 1; 1 ? 0 * ? : 0 : 0; // reduce pessimism ? 1 1 * ? : 1 : 1; // reduce pessimism 1 1 * ? ? : ? : -; // Ignore all edges on nextstate 1 1 ? f ? : ? : -; // Ignore non-triggering clock edge 0 1 ? ? ? : ? : 1; // SN activated * 1 ? ? ? : 1 : 1; // Cover all transitions on SN ? 0 ? ? ? : ? : 0; // RN activated 1 * ? ? ? : 0 : 0; // Cover all transitions on RN ? ? ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module DFFRS_X1 (CK, D, RN, SN, Q, QN); input CK; input D; input RN; input SN; output Q; output QN; reg NOTIFIER; seq3(IQ, SN, RN, nextstate, CK, NOTIFIER); and(IQN, i_15, i_16); not(i_15, IQ); not(i_16, i_17); and(i_17, i_18, i_19); not(i_18, SN); not(i_19, RN); buf(Q, IQ); buf(QN, IQN); buf(nextstate, D); and(id_3, SN, RN); specify (posedge CK => (Q +: D)) = (0.1, 0.1); if((CK == 1'b1) && (SN == 1'b0)) (RN => Q) = (0.1, 0.1); if((CK == 1'b0) && (SN == 1'b0)) (RN => Q) = (0.1, 0.1); if((CK == 1'b1) && (SN == 1'b1)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); if((CK == 1'b0) && (SN == 1'b1)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); if((CK == 1'b1) && (RN == 1'b1)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0) && (RN == 1'b1)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); if((CK == 1'b1) && (SN == 1'b1)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0) && (SN == 1'b1)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); if((CK == 1'b1) && (RN == 1'b1)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); if((CK == 1'b1) && (RN == 1'b0)) (SN => QN) = (0.1, 0.1); if((CK == 1'b0) && (RN == 1'b0)) (SN => QN) = (0.1, 0.1); if((CK == 1'b0) && (RN == 1'b1)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); $width(negedge CK &&& id_3, 0.1, 0, NOTIFIER); $width(posedge CK &&& id_3, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $recovery(posedge RN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge RN, 0.1, NOTIFIER); $width(negedge RN, 0.1, 0, NOTIFIER); $width(posedge RN, 0.1, 0, NOTIFIER); $recovery(posedge SN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge SN, 0.1, NOTIFIER); $width(negedge SN, 0.1, 0, NOTIFIER); $width(posedge SN, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, SN, RN, nextstate, CK, NOTIFIER); output IQ; input SN; input RN; input nextstate; input CK; input NOTIFIER; reg IQ; table // SN RN nextstate CK NOTIFIER : @IQ : IQ 1 ? 0 r ? : ? : 0; ? 1 1 r ? : ? : 1; 1 ? 0 * ? : 0 : 0; // reduce pessimism ? 1 1 * ? : 1 : 1; // reduce pessimism 1 1 * ? ? : ? : -; // Ignore all edges on nextstate 1 1 ? f ? : ? : -; // Ignore non-triggering clock edge 0 1 ? ? ? : ? : 1; // SN activated * 1 ? ? ? : 1 : 1; // Cover all transitions on SN ? 0 ? ? ? : ? : 0; // RN activated 1 * ? ? ? : 0 : 0; // Cover all transitions on RN ? ? ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module DFFRS_X2 (CK, D, RN, SN, Q, QN); input CK; input D; input RN; input SN; output Q; output QN; reg NOTIFIER; seq3(IQ, SN, RN, nextstate, CK, NOTIFIER); and(IQN, i_15, i_16); not(i_15, IQ); not(i_16, i_17); and(i_17, i_18, i_19); not(i_18, SN); not(i_19, RN); buf(Q, IQ); buf(QN, IQN); buf(nextstate, D); and(id_3, SN, RN); specify (posedge CK => (Q +: D)) = (0.1, 0.1); if((CK == 1'b1) && (SN == 1'b0)) (RN => Q) = (0.1, 0.1); if((CK == 1'b0) && (SN == 1'b0)) (RN => Q) = (0.1, 0.1); if((CK == 1'b1) && (SN == 1'b1)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); if((CK == 1'b0) && (SN == 1'b1)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); if((CK == 1'b1) && (RN == 1'b1)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0) && (RN == 1'b1)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); if((CK == 1'b1) && (SN == 1'b1)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0) && (SN == 1'b1)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); if((CK == 1'b1) && (RN == 1'b1)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); if((CK == 1'b1) && (RN == 1'b0)) (SN => QN) = (0.1, 0.1); if((CK == 1'b0) && (RN == 1'b0)) (SN => QN) = (0.1, 0.1); if((CK == 1'b0) && (RN == 1'b1)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); $width(negedge CK &&& id_3, 0.1, 0, NOTIFIER); $width(posedge CK &&& id_3, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $recovery(posedge RN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge RN, 0.1, NOTIFIER); $width(negedge RN, 0.1, 0, NOTIFIER); $width(posedge RN, 0.1, 0, NOTIFIER); $recovery(posedge SN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge SN, 0.1, NOTIFIER); $width(negedge SN, 0.1, 0, NOTIFIER); $width(posedge SN, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, RN, nextstate, CK, NOTIFIER); output IQ; input RN; input nextstate; input CK; input NOTIFIER; reg IQ; table // RN nextstate CK NOTIFIER : @IQ : IQ ? 0 r ? : ? : 0; 1 1 r ? : ? : 1; ? 0 * ? : 0 : 0; // reduce pessimism 1 1 * ? : 1 : 1; // reduce pessimism 1 * ? ? : ? : -; // Ignore all edges on nextstate 1 ? f ? : ? : -; // Ignore non-triggering clock edge 0 ? ? ? : ? : 0; // RN activated * ? ? ? : 0 : 0; // Cover all transitions on RN ? ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module DFFR_X1 (CK, D, RN, Q, QN); input CK; input D; input RN; output Q; output QN; reg NOTIFIER; seq3(IQ, RN, nextstate, CK, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(QN, IQN); buf(nextstate, D); specify (posedge CK => (Q +: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); if((CK == 1'b0)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); $width(negedge CK &&& ((RN)), 0.1, 0, NOTIFIER); $width(posedge CK &&& ((RN)), 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $recovery(posedge RN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge RN, 0.1, NOTIFIER); $width(negedge RN, 0.1, 0, NOTIFIER); $width(posedge RN, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, RN, nextstate, CK, NOTIFIER); output IQ; input RN; input nextstate; input CK; input NOTIFIER; reg IQ; table // RN nextstate CK NOTIFIER : @IQ : IQ ? 0 r ? : ? : 0; 1 1 r ? : ? : 1; ? 0 * ? : 0 : 0; // reduce pessimism 1 1 * ? : 1 : 1; // reduce pessimism 1 * ? ? : ? : -; // Ignore all edges on nextstate 1 ? f ? : ? : -; // Ignore non-triggering clock edge 0 ? ? ? : ? : 0; // RN activated * ? ? ? : 0 : 0; // Cover all transitions on RN ? ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module DFFR_X2 (CK, D, RN, Q, QN); input CK; input D; input RN; output Q; output QN; reg NOTIFIER; seq3(IQ, RN, nextstate, CK, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(QN, IQN); buf(nextstate, D); specify (posedge CK => (Q +: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); if((CK == 1'b0)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); $width(negedge CK &&& ((RN)), 0.1, 0, NOTIFIER); $width(posedge CK &&& ((RN)), 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $recovery(posedge RN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge RN, 0.1, NOTIFIER); $width(negedge RN, 0.1, 0, NOTIFIER); $width(posedge RN, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, SN, nextstate, CK, NOTIFIER); output IQ; input SN; input nextstate; input CK; input NOTIFIER; reg IQ; table // SN nextstate CK NOTIFIER : @IQ : IQ 1 0 r ? : ? : 0; ? 1 r ? : ? : 1; 1 0 * ? : 0 : 0; // reduce pessimism ? 1 * ? : 1 : 1; // reduce pessimism 1 * ? ? : ? : -; // Ignore all edges on nextstate 1 ? f ? : ? : -; // Ignore non-triggering clock edge 0 ? ? ? : ? : 1; // SN activated * ? ? ? : 1 : 1; // Cover all transitions on SN ? ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module DFFS_X1 (CK, D, SN, Q, QN); input CK; input D; input SN; output Q; output QN; reg NOTIFIER; seq3(IQ, SN, nextstate, CK, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(QN, IQN); buf(nextstate, D); specify (posedge CK => (Q +: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); if((CK == 1'b0)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); $width(negedge CK &&& ((SN)), 0.1, 0, NOTIFIER); $width(posedge CK &&& ((SN)), 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $recovery(posedge SN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge SN, 0.1, NOTIFIER); $width(negedge SN, 0.1, 0, NOTIFIER); $width(posedge SN, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, SN, nextstate, CK, NOTIFIER); output IQ; input SN; input nextstate; input CK; input NOTIFIER; reg IQ; table // SN nextstate CK NOTIFIER : @IQ : IQ 1 0 r ? : ? : 0; ? 1 r ? : ? : 1; 1 0 * ? : 0 : 0; // reduce pessimism ? 1 * ? : 1 : 1; // reduce pessimism 1 * ? ? : ? : -; // Ignore all edges on nextstate 1 ? f ? : ? : -; // Ignore non-triggering clock edge 0 ? ? ? : ? : 1; // SN activated * ? ? ? : 1 : 1; // Cover all transitions on SN ? ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module DFFS_X2 (CK, D, SN, Q, QN); input CK; input D; input SN; output Q; output QN; reg NOTIFIER; seq3(IQ, SN, nextstate, CK, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(QN, IQN); buf(nextstate, D); specify (posedge CK => (Q +: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); if((CK == 1'b0)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); $width(negedge CK &&& ((SN)), 0.1, 0, NOTIFIER); $width(posedge CK &&& ((SN)), 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $recovery(posedge SN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge SN, 0.1, NOTIFIER); $width(negedge SN, 0.1, 0, NOTIFIER); $width(posedge SN, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, CK, NOTIFIER); output IQ; input nextstate; input CK; input NOTIFIER; reg IQ; table // nextstate CK NOTIFIER : @IQ : IQ 0 r ? : ? : 0; 1 r ? : ? : 1; 0 * ? : 0 : 0; // reduce pessimism 1 * ? : 1 : 1; // reduce pessimism * ? ? : ? : -; // Ignore all edges on nextstate ? f ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module DFF_X1 (CK, D, Q, QN); input CK; input D; output Q; output QN; reg NOTIFIER; seq3(IQ, nextstate, CK, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(QN, IQN); buf(nextstate, D); specify (posedge CK => (Q +: D)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); $width(negedge CK, 0.1, 0, NOTIFIER); $width(posedge CK, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, CK, NOTIFIER); output IQ; input nextstate; input CK; input NOTIFIER; reg IQ; table // nextstate CK NOTIFIER : @IQ : IQ 0 r ? : ? : 0; 1 r ? : ? : 1; 0 * ? : 0 : 0; // reduce pessimism 1 * ? : 1 : 1; // reduce pessimism * ? ? : ? : -; // Ignore all edges on nextstate ? f ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module DFF_X2 (CK, D, Q, QN); input CK; input D; output Q; output QN; reg NOTIFIER; seq3(IQ, nextstate, CK, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(QN, IQN); buf(nextstate, D); specify (posedge CK => (Q +: D)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); $width(negedge CK, 0.1, 0, NOTIFIER); $width(posedge CK, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, G, NOTIFIER); output IQ; input nextstate; input G; input NOTIFIER; reg IQ; table // nextstate G NOTIFIER : @IQ : IQ 0 1 ? : ? : 0; 1 1 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 0 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module DLH_X1 (D, G, Q); input D; input G; output Q; reg NOTIFIER; seq3(IQ, nextstate, G, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(nextstate, D); specify (D => Q) = (0.1, 0.1); (posedge G => (Q +: D)) = (0.1, 0.1); $setuphold(negedge G, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(negedge G, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $width(negedge G, 0.1, 0, NOTIFIER); $width(posedge G, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, G, NOTIFIER); output IQ; input nextstate; input G; input NOTIFIER; reg IQ; table // nextstate G NOTIFIER : @IQ : IQ 0 1 ? : ? : 0; 1 1 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 0 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module DLH_X2 (D, G, Q); input D; input G; output Q; reg NOTIFIER; seq3(IQ, nextstate, G, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(nextstate, D); specify (D => Q) = (0.1, 0.1); (posedge G => (Q +: D)) = (0.1, 0.1); $setuphold(negedge G, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(negedge G, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $width(negedge G, 0.1, 0, NOTIFIER); $width(posedge G, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, GN, NOTIFIER); output IQ; input nextstate; input GN; input NOTIFIER; reg IQ; table // nextstate GN NOTIFIER : @IQ : IQ 0 0 ? : ? : 0; 1 0 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 1 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module DLL_X1 (D, GN, Q); input D; input GN; output Q; reg NOTIFIER; seq3(IQ, nextstate, GN, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(nextstate, D); specify (D => Q) = (0.1, 0.1); (negedge GN => (Q +: D)) = (0.1, 0.1); $setuphold(posedge GN, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge GN, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $width(negedge GN, 0.1, 0, NOTIFIER); $width(posedge GN, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, GN, NOTIFIER); output IQ; input nextstate; input GN; input NOTIFIER; reg IQ; table // nextstate GN NOTIFIER : @IQ : IQ 0 0 ? : ? : 0; 1 0 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 1 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module DLL_X2 (D, GN, Q); input D; input GN; output Q; reg NOTIFIER; seq3(IQ, nextstate, GN, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(nextstate, D); specify (D => Q) = (0.1, 0.1); (negedge GN => (Q +: D)) = (0.1, 0.1); $setuphold(posedge GN, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge GN, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $width(negedge GN, 0.1, 0, NOTIFIER); $width(posedge GN, 0.1, 0, NOTIFIER); endspecify endmodule module FA_X1 (A, B, CI, CO, S); input A; input B; input CI; output CO; output S; or(CO, i_24, i_25); and(i_24, A, B); and(i_25, CI, i_26); or(i_26, A, B); xor(S, CI, i_30); xor(i_30, A, B); specify if((B == 1'b0) && (CI == 1'b1)) (A => CO) = (0.1, 0.1); if((B == 1'b1) && (CI == 1'b0)) (A => CO) = (0.1, 0.1); if((A == 1'b1) && (CI == 1'b0)) (B => CO) = (0.1, 0.1); if((A == 1'b0) && (CI == 1'b1)) (B => CO) = (0.1, 0.1); if((A == 1'b1) && (B == 1'b0)) (CI => CO) = (0.1, 0.1); if((A == 1'b0) && (B == 1'b1)) (CI => CO) = (0.1, 0.1); if((B == 1'b0) && (CI == 1'b1)) (A => S) = (0.1, 0.1); if((B == 1'b0) && (CI == 1'b0)) (A => S) = (0.1, 0.1); if((B == 1'b1) && (CI == 1'b1)) (A => S) = (0.1, 0.1); if((B == 1'b1) && (CI == 1'b0)) (A => S) = (0.1, 0.1); if((A == 1'b0) && (CI == 1'b0)) (B => S) = (0.1, 0.1); if((A == 1'b1) && (CI == 1'b0)) (B => S) = (0.1, 0.1); if((A == 1'b1) && (CI == 1'b1)) (B => S) = (0.1, 0.1); if((A == 1'b0) && (CI == 1'b1)) (B => S) = (0.1, 0.1); if((A == 1'b1) && (B == 1'b1)) (CI => S) = (0.1, 0.1); if((A == 1'b1) && (B == 1'b0)) (CI => S) = (0.1, 0.1); if((A == 1'b0) && (B == 1'b1)) (CI => S) = (0.1, 0.1); if((A == 1'b0) && (B == 1'b0)) (CI => S) = (0.1, 0.1); endspecify endmodule module FILLCELL_X1 (); endmodule module FILLCELL_X16 (); endmodule module FILLCELL_X2 (); endmodule module FILLCELL_X32 (); endmodule module FILLCELL_X4 (); endmodule module FILLCELL_X8 (); endmodule module HA_X1 (A, B, CO, S); input A; input B; output CO; output S; and(CO, A, B); xor(S, A, B); specify (A => CO) = (0.1, 0.1); (B => CO) = (0.1, 0.1); if((B == 1'b0)) (A => S) = (0.1, 0.1); if((B == 1'b1)) (A => S) = (0.1, 0.1); if((A == 1'b1)) (B => S) = (0.1, 0.1); if((A == 1'b0)) (B => S) = (0.1, 0.1); endspecify endmodule module INV_X1 (A, ZN); input A; output ZN; not(ZN, A); specify (A => ZN) = (0.1, 0.1); endspecify endmodule module INV_X16 (A, ZN); input A; output ZN; not(ZN, A); specify (A => ZN) = (0.1, 0.1); endspecify endmodule module INV_X2 (A, ZN); input A; output ZN; not(ZN, A); specify (A => ZN) = (0.1, 0.1); endspecify endmodule module INV_X32 (A, ZN); input A; output ZN; not(ZN, A); specify (A => ZN) = (0.1, 0.1); endspecify endmodule module INV_X4 (A, ZN); input A; output ZN; not(ZN, A); specify (A => ZN) = (0.1, 0.1); endspecify endmodule module INV_X8 (A, ZN); input A; output ZN; not(ZN, A); specify (A => ZN) = (0.1, 0.1); endspecify endmodule module LOGIC0_X1 (Z); output Z; buf(Z, 0); endmodule module LOGIC1_X1 (Z); output Z; buf(Z, 1); endmodule module MUX2_X1 (A, B, S, Z); input A; input B; input S; output Z; or(Z, i_38, i_39); and(i_38, S, B); and(i_39, A, i_40); not(i_40, S); specify if((B == 1'b1) && (S == 1'b0)) (A => Z) = (0.1, 0.1); if((B == 1'b0) && (S == 1'b0)) (A => Z) = (0.1, 0.1); if((A == 1'b1) && (S == 1'b1)) (B => Z) = (0.1, 0.1); if((A == 1'b0) && (S == 1'b1)) (B => Z) = (0.1, 0.1); if((A == 1'b1) && (B == 1'b0)) (S => Z) = (0.1, 0.1); if((A == 1'b0) && (B == 1'b1)) (S => Z) = (0.1, 0.1); endspecify endmodule module MUX2_X2 (A, B, S, Z); input A; input B; input S; output Z; or(Z, i_58, i_59); and(i_58, S, B); and(i_59, A, i_60); not(i_60, S); specify if((B == 1'b1) && (S == 1'b0)) (A => Z) = (0.1, 0.1); if((B == 1'b0) && (S == 1'b0)) (A => Z) = (0.1, 0.1); if((A == 1'b1) && (S == 1'b1)) (B => Z) = (0.1, 0.1); if((A == 1'b0) && (S == 1'b1)) (B => Z) = (0.1, 0.1); if((A == 1'b1) && (B == 1'b0)) (S => Z) = (0.1, 0.1); if((A == 1'b0) && (B == 1'b1)) (S => Z) = (0.1, 0.1); endspecify endmodule module NAND2_X1 (A1, A2, ZN); input A1; input A2; output ZN; not(ZN, i_6); and(i_6, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); endspecify endmodule module NAND2_X2 (A1, A2, ZN); input A1; input A2; output ZN; not(ZN, i_6); and(i_6, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); endspecify endmodule module NAND2_X4 (A1, A2, ZN); input A1; input A2; output ZN; not(ZN, i_6); and(i_6, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); endspecify endmodule module NAND3_X1 (A1, A2, A3, ZN); input A1; input A2; input A3; output ZN; not(ZN, i_32); and(i_32, i_33, A3); and(i_33, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); endspecify endmodule module NAND3_X2 (A1, A2, A3, ZN); input A1; input A2; input A3; output ZN; not(ZN, i_32); and(i_32, i_33, A3); and(i_33, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); endspecify endmodule module NAND3_X4 (A1, A2, A3, ZN); input A1; input A2; input A3; output ZN; not(ZN, i_12); and(i_12, i_13, A3); and(i_13, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); endspecify endmodule module NAND4_X1 (A1, A2, A3, A4, ZN); input A1; input A2; input A3; input A4; output ZN; not(ZN, i_18); and(i_18, i_19, A4); and(i_19, i_20, A3); and(i_20, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); (A4 => ZN) = (0.1, 0.1); endspecify endmodule module NAND4_X2 (A1, A2, A3, A4, ZN); input A1; input A2; input A3; input A4; output ZN; not(ZN, i_18); and(i_18, i_19, A4); and(i_19, i_20, A3); and(i_20, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); (A4 => ZN) = (0.1, 0.1); endspecify endmodule module NAND4_X4 (A1, A2, A3, A4, ZN); input A1; input A2; input A3; input A4; output ZN; not(ZN, i_18); and(i_18, i_19, A4); and(i_19, i_20, A3); and(i_20, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); (A4 => ZN) = (0.1, 0.1); endspecify endmodule module NOR2_X1 (A1, A2, ZN); input A1; input A2; output ZN; not(ZN, i_66); or(i_66, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); endspecify endmodule module NOR2_X2 (A1, A2, ZN); input A1; input A2; output ZN; not(ZN, i_46); or(i_46, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); endspecify endmodule module NOR2_X4 (A1, A2, ZN); input A1; input A2; output ZN; not(ZN, i_66); or(i_66, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); endspecify endmodule module NOR3_X1 (A1, A2, A3, ZN); input A1; input A2; input A3; output ZN; not(ZN, i_12); or(i_12, i_13, A3); or(i_13, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); endspecify endmodule module NOR3_X2 (A1, A2, A3, ZN); input A1; input A2; input A3; output ZN; not(ZN, i_12); or(i_12, i_13, A3); or(i_13, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); endspecify endmodule module NOR3_X4 (A1, A2, A3, ZN); input A1; input A2; input A3; output ZN; not(ZN, i_12); or(i_12, i_13, A3); or(i_13, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); endspecify endmodule module NOR4_X1 (A1, A2, A3, A4, ZN); input A1; input A2; input A3; input A4; output ZN; not(ZN, i_18); or(i_18, i_19, A4); or(i_19, i_20, A3); or(i_20, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); (A4 => ZN) = (0.1, 0.1); endspecify endmodule module NOR4_X2 (A1, A2, A3, A4, ZN); input A1; input A2; input A3; input A4; output ZN; not(ZN, i_18); or(i_18, i_19, A4); or(i_19, i_20, A3); or(i_20, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); (A4 => ZN) = (0.1, 0.1); endspecify endmodule module NOR4_X4 (A1, A2, A3, A4, ZN); input A1; input A2; input A3; input A4; output ZN; not(ZN, i_18); or(i_18, i_19, A4); or(i_19, i_20, A3); or(i_20, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); (A4 => ZN) = (0.1, 0.1); endspecify endmodule module OAI211_X1 (A, B, C1, C2, ZN); input A; input B; input C1; input C2; output ZN; not(ZN, i_18); and(i_18, i_19, B); and(i_19, i_20, A); or(i_20, C1, C2); specify if((B == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((B == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B => ZN) = (0.1, 0.1); if((A == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B => ZN) = (0.1, 0.1); if((A == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (B => ZN) = (0.1, 0.1); (C1 => ZN) = (0.1, 0.1); (C2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI211_X2 (A, B, C1, C2, ZN); input A; input B; input C1; input C2; output ZN; not(ZN, i_18); and(i_18, i_19, B); and(i_19, i_20, A); or(i_20, C1, C2); specify if((B == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((B == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B => ZN) = (0.1, 0.1); if((A == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B => ZN) = (0.1, 0.1); if((A == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (B => ZN) = (0.1, 0.1); (C1 => ZN) = (0.1, 0.1); (C2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI211_X4 (A, B, C1, C2, ZN); input A; input B; input C1; input C2; output ZN; not(ZN, i_18); and(i_18, i_19, B); and(i_19, i_20, A); or(i_20, C1, C2); specify if((B == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((B == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0)) (B => ZN) = (0.1, 0.1); if((A == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (B => ZN) = (0.1, 0.1); if((A == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (B => ZN) = (0.1, 0.1); (C1 => ZN) = (0.1, 0.1); (C2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI21_X1 (A, B1, B2, ZN); input A; input B1; input B2; output ZN; not(ZN, i_12); and(i_12, A, i_13); or(i_13, B1, B2); specify if((B1 == 1'b1) && (B2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b1) && (B2 == 1'b1)) (A => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI21_X2 (A, B1, B2, ZN); input A; input B1; input B2; output ZN; not(ZN, i_12); and(i_12, A, i_13); or(i_13, B1, B2); specify if((B1 == 1'b1) && (B2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b1) && (B2 == 1'b1)) (A => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI21_X4 (A, B1, B2, ZN); input A; input B1; input B2; output ZN; not(ZN, i_12); and(i_12, A, i_13); or(i_13, B1, B2); specify if((B1 == 1'b1) && (B2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b1) && (B2 == 1'b1)) (A => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI221_X1 (A, B1, B2, C1, C2, ZN); input A; input B1; input B2; input C1; input C2; output ZN; not(ZN, i_24); and(i_24, i_25, i_27); and(i_25, i_26, A); or(i_26, C1, C2); or(i_27, B1, B2); specify (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b1) || (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b1) || (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI221_X2 (A, B1, B2, C1, C2, ZN); input A; input B1; input B2; input C1; input C2; output ZN; not(ZN, i_24); and(i_24, i_25, i_27); and(i_25, i_26, A); or(i_26, C1, C2); or(i_27, B1, B2); specify (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b1) || (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b1) || (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI221_X4 (A, B1, B2, C1, C2, ZN); input A; input B1; input B2; input C1; input C2; output ZN; not(ZN, i_24); and(i_24, i_25, i_27); and(i_25, i_26, A); or(i_26, C1, C2); or(i_27, B1, B2); specify (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (A => ZN) = (0.1, 0.1); if((B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b1) || (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b1) || (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI222_X1 (A1, A2, B1, B2, C1, C2, ZN); input A1; input A2; input B1; input B2; input C1; input C2; output ZN; not(ZN, i_30); and(i_30, i_31, i_34); and(i_31, i_32, i_33); or(i_32, A1, A2); or(i_33, B1, B2); or(i_34, C1, C2); specify (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b1) || (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b1) || (A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) || (A1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1) || (A2 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) || (A1 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1) || (A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b1) && (C1 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI222_X2 (A1, A2, B1, B2, C1, C2, ZN); input A1; input A2; input B1; input B2; input C1; input C2; output ZN; not(ZN, i_30); and(i_30, i_31, i_34); and(i_31, i_32, i_33); or(i_32, A1, A2); or(i_33, B1, B2); or(i_34, C1, C2); specify (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b1) || (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b1) || (A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) || (A1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1) || (A2 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) || (A1 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1) || (A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b1) && (C1 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI222_X4 (A1, A2, B1, B2, C1, C2, ZN); input A1; input A2; input B1; input B2; input C1; input C2; output ZN; not(ZN, i_30); and(i_30, i_31, i_34); and(i_31, i_32, i_33); or(i_32, A1, A2); or(i_33, B1, B2); or(i_34, C1, C2); specify (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b1) || (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b1) || (A2 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1) || (A2 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) && (C2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b1) || (A1 == 1'b0) && (B1 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1) || (A1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b1) && (C2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) || (A1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1) || (A2 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1)) (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); if((A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (C1 == 1'b0) && (C2 == 1'b1) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) || (A1 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1) || (A2 == 1'b1) && (B1 == 1'b0) && (C1 == 1'b1) && (C2 == 1'b1)) (B2 => ZN) = (0.1, 0.1); (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C2 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C2 == 1'b0)) (C1 => ZN) = (0.1, 0.1); (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b1) && (C1 == 1'b0) || (A1 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b1) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (C1 == 1'b0) || (A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (C1 == 1'b0)) (C2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI22_X1 (A1, A2, B1, B2, ZN); input A1; input A2; input B1; input B2; output ZN; not(ZN, i_18); and(i_18, i_19, i_20); or(i_19, A1, A2); or(i_20, B1, B2); specify if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0)) (B2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI22_X2 (A1, A2, B1, B2, ZN); input A1; input A2; input B1; input B2; output ZN; not(ZN, i_18); and(i_18, i_19, i_20); or(i_19, A1, A2); or(i_20, B1, B2); specify if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0)) (B2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI22_X4 (A1, A2, B1, B2, ZN); input A1; input A2; input B1; input B2; output ZN; not(ZN, i_18); and(i_18, i_19, i_20); or(i_19, A1, A2); or(i_20, B1, B2); specify if((A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B2 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b0) && (B1 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (A2 == 1'b1) && (B1 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (B1 == 1'b0)) (B2 => ZN) = (0.1, 0.1); endspecify endmodule module OAI33_X1 (A1, A2, A3, B1, B2, B3, ZN); input A1; input A2; input A3; input B1; input B2; input B3; output ZN; not(ZN, i_30); and(i_30, i_31, i_33); or(i_31, i_32, A3); or(i_32, A1, A2); or(i_33, i_34, B3); or(i_34, B1, B2); specify (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (A3 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (B3 == 1'b0) || (A2 == 1'b0) && (A3 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (B3 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (A3 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (B3 == 1'b0)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (A3 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (B3 == 1'b1)) (A1 => ZN) = (0.1, 0.1); if((A2 == 1'b0) && (A3 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) || (A2 == 1'b0) && (A3 == 1'b0) && (B1 == 1'b1) && (B3 == 1'b1)) (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A3 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (B3 == 1'b0) || (A1 == 1'b0) && (A3 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (B3 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A3 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (B3 == 1'b0)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A3 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) || (A1 == 1'b0) && (A3 == 1'b0) && (B1 == 1'b1) && (B3 == 1'b1)) (A2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A3 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (B3 == 1'b1)) (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (B3 == 1'b1)) (A3 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b1) || (A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b1) && (B3 == 1'b1)) (A3 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b1) && (B2 == 1'b0) && (B3 == 1'b0)) (A3 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b1) && (B3 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) && (B3 == 1'b1)) (A3 => ZN) = (0.1, 0.1); (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (A3 == 1'b0) && (B2 == 1'b0) && (B3 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b0) && (A3 == 1'b1) && (B2 == 1'b0) && (B3 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (A3 == 1'b1) && (B2 == 1'b0) && (B3 == 1'b0)) (B1 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B2 == 1'b0) && (B3 == 1'b0)) (B1 => ZN) = (0.1, 0.1); (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (A3 == 1'b1) && (B1 == 1'b0) && (B3 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (B3 == 1'b0)) (B2 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (A3 == 1'b0) && (B1 == 1'b0) && (B3 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b0) && (A3 == 1'b1) && (B1 == 1'b0) && (B3 == 1'b0)) (B2 => ZN) = (0.1, 0.1); (B3 => ZN) = (0.1, 0.1); if((A1 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0)) (B3 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (A3 == 1'b0) && (B1 == 1'b0) && (B2 == 1'b0) || (A1 == 1'b0) && (A2 == 1'b0) && (A3 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0)) (B3 => ZN) = (0.1, 0.1); if((A1 == 1'b0) && (A2 == 1'b1) && (A3 == 1'b1) && (B1 == 1'b0) && (B2 == 1'b0)) (B3 => ZN) = (0.1, 0.1); endspecify endmodule module OR2_X1 (A1, A2, ZN); input A1; input A2; output ZN; or(ZN, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); endspecify endmodule module OR2_X2 (A1, A2, ZN); input A1; input A2; output ZN; or(ZN, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); endspecify endmodule module OR2_X4 (A1, A2, ZN); input A1; input A2; output ZN; or(ZN, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); endspecify endmodule module OR3_X1 (A1, A2, A3, ZN); input A1; input A2; input A3; output ZN; or(ZN, i_6, A3); or(i_6, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); endspecify endmodule module OR3_X2 (A1, A2, A3, ZN); input A1; input A2; input A3; output ZN; or(ZN, i_6, A3); or(i_6, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); endspecify endmodule module OR3_X4 (A1, A2, A3, ZN); input A1; input A2; input A3; output ZN; or(ZN, i_6, A3); or(i_6, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); endspecify endmodule module OR4_X1 (A1, A2, A3, A4, ZN); input A1; input A2; input A3; input A4; output ZN; or(ZN, i_12, A4); or(i_12, i_13, A3); or(i_13, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); (A4 => ZN) = (0.1, 0.1); endspecify endmodule module OR4_X2 (A1, A2, A3, A4, ZN); input A1; input A2; input A3; input A4; output ZN; or(ZN, i_12, A4); or(i_12, i_13, A3); or(i_13, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); (A4 => ZN) = (0.1, 0.1); endspecify endmodule module OR4_X4 (A1, A2, A3, A4, ZN); input A1; input A2; input A3; input A4; output ZN; or(ZN, i_12, A4); or(i_12, i_13, A3); or(i_13, A1, A2); specify (A1 => ZN) = (0.1, 0.1); (A2 => ZN) = (0.1, 0.1); (A3 => ZN) = (0.1, 0.1); (A4 => ZN) = (0.1, 0.1); endspecify endmodule primitive seq3 (IQ, SN, RN, nextstate, CK, NOTIFIER); output IQ; input SN; input RN; input nextstate; input CK; input NOTIFIER; reg IQ; table // SN RN nextstate CK NOTIFIER : @IQ : IQ 1 ? 0 r ? : ? : 0; ? 1 1 r ? : ? : 1; 1 ? 0 * ? : 0 : 0; // reduce pessimism ? 1 1 * ? : 1 : 1; // reduce pessimism 1 1 * ? ? : ? : -; // Ignore all edges on nextstate 1 1 ? f ? : ? : -; // Ignore non-triggering clock edge 0 1 ? ? ? : ? : 1; // SN activated * 1 ? ? ? : 1 : 1; // Cover all transitions on SN ? 0 ? ? ? : ? : 0; // RN activated 1 * ? ? ? : 0 : 0; // Cover all transitions on RN ? ? ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module SDFFRS_X1 (CK, D, RN, SE, SI, SN, Q, QN); input CK; input D; input RN; input SE; input SI; input SN; output Q; output QN; reg NOTIFIER; seq3(IQ, SN, RN, nextstate, CK, NOTIFIER); and(IQN, i_33, i_34); not(i_33, IQ); not(i_34, i_35); and(i_35, i_36, i_37); not(i_36, SN); not(i_37, RN); buf(Q, IQ); buf(QN, IQN); or(nextstate, i_38, i_39); and(i_38, SE, SI); and(i_39, D, i_40); not(i_40, SE); and(id_3, SN, RN); specify (posedge CK => (Q +: D)) = (0.1, 0.1); if((CK == 1'b1) && (SN == 1'b0)) (RN => Q) = (0.1, 0.1); if((CK == 1'b0) && (SN == 1'b0)) (RN => Q) = (0.1, 0.1); if((CK == 1'b1) && (SN == 1'b1)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); if((CK == 1'b0) && (SN == 1'b1)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); if((CK == 1'b1) && (RN == 1'b1)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0) && (RN == 1'b1)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); if((CK == 1'b1) && (SN == 1'b1)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0) && (SN == 1'b1)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); if((CK == 1'b1) && (RN == 1'b1)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); if((CK == 1'b1) && (RN == 1'b0)) (SN => QN) = (0.1, 0.1); if((CK == 1'b0) && (RN == 1'b0)) (SN => QN) = (0.1, 0.1); if((CK == 1'b0) && (RN == 1'b1)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); $width(negedge CK &&& id_3, 0.1, 0, NOTIFIER); $width(posedge CK &&& id_3, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $recovery(posedge RN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge RN, 0.1, NOTIFIER); $width(negedge RN, 0.1, 0, NOTIFIER); $width(posedge RN, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SE, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SE, 0.1, 0.1, NOTIFIER); $width(negedge SE, 0.1, 0, NOTIFIER); $width(posedge SE, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SI, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SI, 0.1, 0.1, NOTIFIER); $width(negedge SI, 0.1, 0, NOTIFIER); $width(posedge SI, 0.1, 0, NOTIFIER); $recovery(posedge SN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge SN, 0.1, NOTIFIER); $width(negedge SN, 0.1, 0, NOTIFIER); $width(posedge SN, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, SN, RN, nextstate, CK, NOTIFIER); output IQ; input SN; input RN; input nextstate; input CK; input NOTIFIER; reg IQ; table // SN RN nextstate CK NOTIFIER : @IQ : IQ 1 ? 0 r ? : ? : 0; ? 1 1 r ? : ? : 1; 1 ? 0 * ? : 0 : 0; // reduce pessimism ? 1 1 * ? : 1 : 1; // reduce pessimism 1 1 * ? ? : ? : -; // Ignore all edges on nextstate 1 1 ? f ? : ? : -; // Ignore non-triggering clock edge 0 1 ? ? ? : ? : 1; // SN activated * 1 ? ? ? : 1 : 1; // Cover all transitions on SN ? 0 ? ? ? : ? : 0; // RN activated 1 * ? ? ? : 0 : 0; // Cover all transitions on RN ? ? ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module SDFFRS_X2 (CK, D, RN, SE, SI, SN, Q, QN); input CK; input D; input RN; input SE; input SI; input SN; output Q; output QN; reg NOTIFIER; seq3(IQ, SN, RN, nextstate, CK, NOTIFIER); and(IQN, i_33, i_34); not(i_33, IQ); not(i_34, i_35); and(i_35, i_36, i_37); not(i_36, SN); not(i_37, RN); buf(Q, IQ); buf(QN, IQN); or(nextstate, i_38, i_39); and(i_38, SE, SI); and(i_39, D, i_40); not(i_40, SE); and(id_3, SN, RN); specify (posedge CK => (Q +: D)) = (0.1, 0.1); if((CK == 1'b1) && (SN == 1'b0)) (RN => Q) = (0.1, 0.1); if((CK == 1'b0) && (SN == 1'b0)) (RN => Q) = (0.1, 0.1); if((CK == 1'b1) && (SN == 1'b1)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); if((CK == 1'b0) && (SN == 1'b1)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); if((CK == 1'b1) && (RN == 1'b1)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0) && (RN == 1'b1)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); if((CK == 1'b1) && (SN == 1'b1)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0) && (SN == 1'b1)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); if((CK == 1'b1) && (RN == 1'b1)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); if((CK == 1'b1) && (RN == 1'b0)) (SN => QN) = (0.1, 0.1); if((CK == 1'b0) && (RN == 1'b0)) (SN => QN) = (0.1, 0.1); if((CK == 1'b0) && (RN == 1'b1)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); $width(negedge CK &&& id_3, 0.1, 0, NOTIFIER); $width(posedge CK &&& id_3, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $recovery(posedge RN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge RN, 0.1, NOTIFIER); $width(negedge RN, 0.1, 0, NOTIFIER); $width(posedge RN, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SE, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SE, 0.1, 0.1, NOTIFIER); $width(negedge SE, 0.1, 0, NOTIFIER); $width(posedge SE, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SI, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SI, 0.1, 0.1, NOTIFIER); $width(negedge SI, 0.1, 0, NOTIFIER); $width(posedge SI, 0.1, 0, NOTIFIER); $recovery(posedge SN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge SN, 0.1, NOTIFIER); $width(negedge SN, 0.1, 0, NOTIFIER); $width(posedge SN, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, RN, nextstate, CK, NOTIFIER); output IQ; input RN; input nextstate; input CK; input NOTIFIER; reg IQ; table // RN nextstate CK NOTIFIER : @IQ : IQ ? 0 r ? : ? : 0; 1 1 r ? : ? : 1; ? 0 * ? : 0 : 0; // reduce pessimism 1 1 * ? : 1 : 1; // reduce pessimism 1 * ? ? : ? : -; // Ignore all edges on nextstate 1 ? f ? : ? : -; // Ignore non-triggering clock edge 0 ? ? ? : ? : 0; // RN activated * ? ? ? : 0 : 0; // Cover all transitions on RN ? ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module SDFFR_X1 (CK, D, RN, SE, SI, Q, QN); input CK; input D; input RN; input SE; input SI; output Q; output QN; reg NOTIFIER; seq3(IQ, RN, nextstate, CK, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(QN, IQN); or(nextstate, i_18, i_19); and(i_18, SE, SI); and(i_19, D, i_20); not(i_20, SE); specify (posedge CK => (Q +: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); if((CK == 1'b0)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); $width(negedge CK &&& ((RN)), 0.1, 0, NOTIFIER); $width(posedge CK &&& ((RN)), 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $recovery(posedge RN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge RN, 0.1, NOTIFIER); $width(negedge RN, 0.1, 0, NOTIFIER); $width(posedge RN, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SE, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SE, 0.1, 0.1, NOTIFIER); $width(negedge SE, 0.1, 0, NOTIFIER); $width(posedge SE, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SI, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SI, 0.1, 0.1, NOTIFIER); $width(negedge SI, 0.1, 0, NOTIFIER); $width(posedge SI, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, RN, nextstate, CK, NOTIFIER); output IQ; input RN; input nextstate; input CK; input NOTIFIER; reg IQ; table // RN nextstate CK NOTIFIER : @IQ : IQ ? 0 r ? : ? : 0; 1 1 r ? : ? : 1; ? 0 * ? : 0 : 0; // reduce pessimism 1 1 * ? : 1 : 1; // reduce pessimism 1 * ? ? : ? : -; // Ignore all edges on nextstate 1 ? f ? : ? : -; // Ignore non-triggering clock edge 0 ? ? ? : ? : 0; // RN activated * ? ? ? : 0 : 0; // Cover all transitions on RN ? ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module SDFFR_X2 (CK, D, RN, SE, SI, Q, QN); input CK; input D; input RN; input SE; input SI; output Q; output QN; reg NOTIFIER; seq3(IQ, RN, nextstate, CK, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(QN, IQN); or(nextstate, i_18, i_19); and(i_18, SE, SI); and(i_19, D, i_20); not(i_20, SE); specify (posedge CK => (Q +: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); if((CK == 1'b0)) (negedge RN => (Q +: 1'b0)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0)) (negedge RN => (QN +: 1'b1)) = (0.1, 0.1); $width(negedge CK &&& ((RN)), 0.1, 0, NOTIFIER); $width(posedge CK &&& ((RN)), 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $recovery(posedge RN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge RN, 0.1, NOTIFIER); $width(negedge RN, 0.1, 0, NOTIFIER); $width(posedge RN, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SE, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SE, 0.1, 0.1, NOTIFIER); $width(negedge SE, 0.1, 0, NOTIFIER); $width(posedge SE, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SI, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SI, 0.1, 0.1, NOTIFIER); $width(negedge SI, 0.1, 0, NOTIFIER); $width(posedge SI, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, SN, nextstate, CK, NOTIFIER); output IQ; input SN; input nextstate; input CK; input NOTIFIER; reg IQ; table // SN nextstate CK NOTIFIER : @IQ : IQ 1 0 r ? : ? : 0; ? 1 r ? : ? : 1; 1 0 * ? : 0 : 0; // reduce pessimism ? 1 * ? : 1 : 1; // reduce pessimism 1 * ? ? : ? : -; // Ignore all edges on nextstate 1 ? f ? : ? : -; // Ignore non-triggering clock edge 0 ? ? ? : ? : 1; // SN activated * ? ? ? : 1 : 1; // Cover all transitions on SN ? ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module SDFFS_X1 (CK, D, SE, SI, SN, Q, QN); input CK; input D; input SE; input SI; input SN; output Q; output QN; reg NOTIFIER; seq3(IQ, SN, nextstate, CK, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(QN, IQN); or(nextstate, i_18, i_19); and(i_18, SE, SI); and(i_19, D, i_20); not(i_20, SE); specify (posedge CK => (Q +: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); if((CK == 1'b0)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); $width(negedge CK &&& ((SN)), 0.1, 0, NOTIFIER); $width(posedge CK &&& ((SN)), 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SE, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SE, 0.1, 0.1, NOTIFIER); $width(negedge SE, 0.1, 0, NOTIFIER); $width(posedge SE, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SI, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SI, 0.1, 0.1, NOTIFIER); $width(negedge SI, 0.1, 0, NOTIFIER); $width(posedge SI, 0.1, 0, NOTIFIER); $recovery(posedge SN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge SN, 0.1, NOTIFIER); $width(negedge SN, 0.1, 0, NOTIFIER); $width(posedge SN, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, SN, nextstate, CK, NOTIFIER); output IQ; input SN; input nextstate; input CK; input NOTIFIER; reg IQ; table // SN nextstate CK NOTIFIER : @IQ : IQ 1 0 r ? : ? : 0; ? 1 r ? : ? : 1; 1 0 * ? : 0 : 0; // reduce pessimism ? 1 * ? : 1 : 1; // reduce pessimism 1 * ? ? : ? : -; // Ignore all edges on nextstate 1 ? f ? : ? : -; // Ignore non-triggering clock edge 0 ? ? ? : ? : 1; // SN activated * ? ? ? : 1 : 1; // Cover all transitions on SN ? ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module SDFFS_X2 (CK, D, SE, SI, SN, Q, QN); input CK; input D; input SE; input SI; input SN; output Q; output QN; reg NOTIFIER; seq3(IQ, SN, nextstate, CK, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(QN, IQN); or(nextstate, i_18, i_19); and(i_18, SE, SI); and(i_19, D, i_20); not(i_20, SE); specify (posedge CK => (Q +: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); if((CK == 1'b0)) (negedge SN => (Q +: 1'b1)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); if((CK == 1'b1)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); if((CK == 1'b0)) (negedge SN => (QN +: 1'b0)) = (0.1, 0.1); $width(negedge CK &&& ((SN)), 0.1, 0, NOTIFIER); $width(posedge CK &&& ((SN)), 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SE, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SE, 0.1, 0.1, NOTIFIER); $width(negedge SE, 0.1, 0, NOTIFIER); $width(posedge SE, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SI, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SI, 0.1, 0.1, NOTIFIER); $width(negedge SI, 0.1, 0, NOTIFIER); $width(posedge SI, 0.1, 0, NOTIFIER); $recovery(posedge SN, posedge CK, 0.1, NOTIFIER); $hold(posedge CK, posedge SN, 0.1, NOTIFIER); $width(negedge SN, 0.1, 0, NOTIFIER); $width(posedge SN, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, CK, NOTIFIER); output IQ; input nextstate; input CK; input NOTIFIER; reg IQ; table // nextstate CK NOTIFIER : @IQ : IQ 0 r ? : ? : 0; 1 r ? : ? : 1; 0 * ? : 0 : 0; // reduce pessimism 1 * ? : 1 : 1; // reduce pessimism * ? ? : ? : -; // Ignore all edges on nextstate ? f ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module SDFF_X1 (CK, D, SE, SI, Q, QN); input CK; input D; input SE; input SI; output Q; output QN; reg NOTIFIER; seq3(IQ, nextstate, CK, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(QN, IQN); or(nextstate, i_18, i_19); and(i_18, SE, SI); and(i_19, D, i_20); not(i_20, SE); specify (posedge CK => (Q +: D)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); $width(negedge CK, 0.1, 0, NOTIFIER); $width(posedge CK, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SE, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SE, 0.1, 0.1, NOTIFIER); $width(negedge SE, 0.1, 0, NOTIFIER); $width(posedge SE, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SI, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SI, 0.1, 0.1, NOTIFIER); $width(negedge SI, 0.1, 0, NOTIFIER); $width(posedge SI, 0.1, 0, NOTIFIER); endspecify endmodule primitive seq3 (IQ, nextstate, CK, NOTIFIER); output IQ; input nextstate; input CK; input NOTIFIER; reg IQ; table // nextstate CK NOTIFIER : @IQ : IQ 0 r ? : ? : 0; 1 r ? : ? : 1; 0 * ? : 0 : 0; // reduce pessimism 1 * ? : 1 : 1; // reduce pessimism * ? ? : ? : -; // Ignore all edges on nextstate ? f ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module SDFF_X2 (CK, D, SE, SI, Q, QN); input CK; input D; input SE; input SI; output Q; output QN; reg NOTIFIER; seq3(IQ, nextstate, CK, NOTIFIER); not(IQN, IQ); buf(Q, IQ); buf(QN, IQN); or(nextstate, i_18, i_19); and(i_18, SE, SI); and(i_19, D, i_20); not(i_20, SE); specify (posedge CK => (Q +: D)) = (0.1, 0.1); (posedge CK => (QN -: D)) = (0.1, 0.1); $width(negedge CK, 0.1, 0, NOTIFIER); $width(posedge CK, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SE, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SE, 0.1, 0.1, NOTIFIER); $width(negedge SE, 0.1, 0, NOTIFIER); $width(posedge SE, 0.1, 0, NOTIFIER); $setuphold(posedge CK, negedge SI, 0.1, 0.1, NOTIFIER); $setuphold(posedge CK, posedge SI, 0.1, 0.1, NOTIFIER); $width(negedge SI, 0.1, 0, NOTIFIER); $width(posedge SI, 0.1, 0, NOTIFIER); endspecify endmodule module TBUF_X1 (A, EN, Z); input A; input EN; output Z; bufif0(Z, Z_in, Z_enable); buf(Z_enable, EN); buf(Z_in, A); specify (A => Z) = (0.1, 0.1); (EN => Z) = (0.1, 0.1); endspecify endmodule module TBUF_X16 (A, EN, Z); input A; input EN; output Z; bufif0(Z, Z_in, Z_enable); buf(Z_enable, EN); buf(Z_in, A); specify (A => Z) = (0.1, 0.1); (EN => Z) = (0.1, 0.1); endspecify endmodule module TBUF_X2 (A, EN, Z); input A; input EN; output Z; bufif0(Z, Z_in, Z_enable); buf(Z_enable, EN); buf(Z_in, A); specify (A => Z) = (0.1, 0.1); (EN => Z) = (0.1, 0.1); endspecify endmodule module TBUF_X4 (A, EN, Z); input A; input EN; output Z; bufif0(Z, Z_in, Z_enable); buf(Z_enable, EN); buf(Z_in, A); specify (A => Z) = (0.1, 0.1); (EN => Z) = (0.1, 0.1); endspecify endmodule module TBUF_X8 (A, EN, Z); input A; input EN; output Z; bufif0(Z, Z_in, Z_enable); buf(Z_enable, EN); buf(Z_in, A); specify (A => Z) = (0.1, 0.1); (EN => Z) = (0.1, 0.1); endspecify endmodule module TINV_X1 (EN, I, ZN); input EN; input I; output ZN; bufif0(ZN, ZN_in, ZN_enable); buf(ZN_enable, EN); not(ZN_in, I); specify (EN => ZN) = (0.1, 0.1); (I => ZN) = (0.1, 0.1); endspecify endmodule primitive seq3 (IQ, nextstate, G, NOTIFIER); output IQ; input nextstate; input G; input NOTIFIER; reg IQ; table // nextstate G NOTIFIER : @IQ : IQ 0 1 ? : ? : 0; 1 1 ? : ? : 1; * ? ? : ? : -; // Ignore all edges on nextstate ? 0 ? : ? : -; // Ignore non-triggering clock edge ? ? * : ? : x; // Any NOTIFIER change endtable endprimitive module TLAT_X1 (D, G, OE, Q); input D; input G; input OE; output Q; reg NOTIFIER; bufif0(Q, Q_in, Q_enable); not(Q_enable, OE); seq3(IQ, nextstate, G, NOTIFIER); not(IQN, IQ); buf(Q_in, IQ); buf(nextstate, D); specify (D => Q) = (0.1, 0.1); (posedge G => (Q +: D)) = (0.1, 0.1); (OE => Q) = (0.1, 0.1); $setuphold(negedge G, negedge D, 0.1, 0.1, NOTIFIER); $setuphold(negedge G, posedge D, 0.1, 0.1, NOTIFIER); $width(negedge D, 0.1, 0, NOTIFIER); $width(posedge D, 0.1, 0, NOTIFIER); $width(negedge G, 0.1, 0, NOTIFIER); $width(posedge G, 0.1, 0, NOTIFIER); $width(negedge OE, 0.1, 0, NOTIFIER); $width(posedge OE, 0.1, 0, NOTIFIER); endspecify endmodule module XNOR2_X1 (A, B, ZN); input A; input B; output ZN; not(ZN, i_46); xor(i_46, A, B); specify if((B == 1'b0)) (A => ZN) = (0.1, 0.1); if((B == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b1)) (B => ZN) = (0.1, 0.1); if((A == 1'b0)) (B => ZN) = (0.1, 0.1); endspecify endmodule module XNOR2_X2 (A, B, ZN); input A; input B; output ZN; not(ZN, i_46); xor(i_46, A, B); specify if((B == 1'b0)) (A => ZN) = (0.1, 0.1); if((B == 1'b1)) (A => ZN) = (0.1, 0.1); if((A == 1'b1)) (B => ZN) = (0.1, 0.1); if((A == 1'b0)) (B => ZN) = (0.1, 0.1); endspecify endmodule module XOR2_X1 (A, B, Z); input A; input B; output Z; xor(Z, A, B); specify if((B == 1'b0)) (A => Z) = (0.1, 0.1); if((B == 1'b1)) (A => Z) = (0.1, 0.1); if((A == 1'b1)) (B => Z) = (0.1, 0.1); if((A == 1'b0)) (B => Z) = (0.1, 0.1); endspecify endmodule module XOR2_X2 (A, B, Z); input A; input B; output Z; xor(Z, A, B); specify if((B == 1'b0)) (A => Z) = (0.1, 0.1); if((B == 1'b1)) (A => Z) = (0.1, 0.1); if((A == 1'b1)) (B => Z) = (0.1, 0.1); if((A == 1'b0)) (B => Z) = (0.1, 0.1); endspecify endmodule // // End of file //
Go to most recent revision | Compare with Previous | Blame | View Log