URL
https://opencores.org/ocsvn/ata/ata/trunk
Subversion Repositories ata
[/] [ata/] [trunk/] [rtl/] [vhdl/] [ocidec3/] [ud_cnt.vhd] - Rev 33
Compare with Previous | Blame | View Log
--------------------------------------------------------------------- ---- ---- ---- Generic Up/Down counter (ripple carry architecture) ---- ---- ---- ---- Author: Richard Herveille ---- ---- richard@asics.ws ---- ---- www.asics.ws ---- ---- ---- --------------------------------------------------------------------- ---- ---- ---- Copyright (C) 2001, 2002 Richard Herveille ---- ---- richard@asics.ws ---- ---- ---- ---- This source file may be used and distributed without ---- ---- restriction provided that this copyright statement is not ---- ---- removed from the file and that any derivative work contains ---- ---- the original copyright notice and the associated disclaimer.---- ---- ---- ---- THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY ---- ---- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED ---- ---- TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ---- ---- FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR ---- ---- OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, ---- ---- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ---- ---- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE ---- ---- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR ---- ---- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ---- ---- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ---- ---- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT ---- ---- OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ---- ---- POSSIBILITY OF SUCH DAMAGE. ---- ---- ---- --------------------------------------------------------------------- -- -- CVS Log -- -- $Id: ud_cnt.vhd,v 1.1 2002-03-01 03:49:25 rherveille Exp $ -- -- $Date: 2002-03-01 03:49:25 $ -- $Revision: 1.1 $ -- $Author: rherveille $ -- $Locker: $ -- $State: Exp $ -- -- Change History: -- $Log: not supported by cvs2svn $ library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_arith.all; entity ud_cnt is generic( SIZE : natural := 8; RESD : natural := 0 ); port( clk : in std_logic; -- master clock nReset : in std_logic := '1'; -- asynchronous active low reset rst : in std_logic := '0'; -- synchronous active high reset cnt_en : in std_logic := '1'; -- count enable ud : in std_logic := '0'; -- up / not down nld : in std_logic := '1'; -- synchronous active low load d : in unsigned(SIZE -1 downto 0); -- load counter value q : out unsigned(SIZE -1 downto 0); -- current counter value rci : in std_logic := '1'; -- carry input rco : out std_logic -- carry output ); end entity ud_cnt; architecture structural of ud_cnt is signal Qi : unsigned(SIZE -1 downto 0); signal val : unsigned(SIZE downto 0); begin val <= ( ('0' & Qi) + rci) when (ud = '1') else ( ('0' & Qi) - rci); regs: process(clk, nReset) begin if (nReset = '0') then Qi <= conv_unsigned(RESD, SIZE); elsif (clk'event and clk = '1') then if (rst = '1') then Qi <= conv_unsigned(RESD, SIZE); else if (nld = '0') then Qi <= D; elsif (cnt_en = '1') then Qi <= val(SIZE -1 downto 0); end if; end if; end if; end process regs; -- assign outputs Q <= Qi; rco <= val(SIZE); end architecture structural;