URL
https://opencores.org/ocsvn/axi4_tlm_bfm/axi4_tlm_bfm/trunk
Subversion Repositories axi4_tlm_bfm
[/] [axi4_tlm_bfm/] [trunk/] [rtl/] [quartus-synthesis/] [pll.vhd] - Rev 38
Go to most recent revision | Compare with Previous | Blame | View Log
-- megafunction wizard: %ALTPLL% -- GENERATION: STANDARD -- VERSION: WM1.0 -- MODULE: altpll -- ============================================================ -- File Name: pll.vhd -- Megafunction Name(s): -- altpll -- -- Simulation Library Files(s): -- altera_mf -- ============================================================ -- ************************************************************ -- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE! -- -- 12.1 Build 177 11/07/2012 SJ Full Version -- ************************************************************ --Copyright (C) 1991-2012 Altera Corporation --Your use of Altera Corporation's design tools, logic functions --and other software and tools, and its AMPP partner logic --functions, and any output files from any of the foregoing --(including device programming or simulation files), and any --associated documentation or information are expressly subject --to the terms and conditions of the Altera Program License --Subscription Agreement, Altera MegaCore Function License --Agreement, or other applicable license agreement, including, --without limitation, that your use is for the sole purpose of --programming logic devices manufactured by Altera and sold by --Altera or its authorized distributors. Please refer to the --applicable agreement for further details. LIBRARY ieee; USE ieee.std_logic_1164.all; LIBRARY altera_mf; USE altera_mf.all; ENTITY pll IS PORT ( areset : IN STD_LOGIC := '0'; inclk0 : IN STD_LOGIC := '0'; c0 : OUT STD_LOGIC ; locked : OUT STD_LOGIC ); END pll; ARCHITECTURE SYN OF pll IS SIGNAL sub_wire0 : STD_LOGIC ; SIGNAL sub_wire1 : STD_LOGIC_VECTOR (4 DOWNTO 0); SIGNAL sub_wire2 : STD_LOGIC ; SIGNAL sub_wire3 : STD_LOGIC ; SIGNAL sub_wire4 : STD_LOGIC_VECTOR (1 DOWNTO 0); SIGNAL sub_wire5_bv : BIT_VECTOR (0 DOWNTO 0); SIGNAL sub_wire5 : STD_LOGIC_VECTOR (0 DOWNTO 0); COMPONENT altpll GENERIC ( bandwidth_type : STRING; clk0_divide_by : NATURAL; clk0_duty_cycle : NATURAL; clk0_multiply_by : NATURAL; clk0_phase_shift : STRING; compensate_clock : STRING; inclk0_input_frequency : NATURAL; intended_device_family : STRING; lpm_hint : STRING; lpm_type : STRING; operation_mode : STRING; pll_type : STRING; port_activeclock : STRING; port_areset : STRING; port_clkbad0 : STRING; port_clkbad1 : STRING; port_clkloss : STRING; port_clkswitch : STRING; port_configupdate : STRING; port_fbin : STRING; port_inclk0 : STRING; port_inclk1 : STRING; port_locked : STRING; port_pfdena : STRING; port_phasecounterselect : STRING; port_phasedone : STRING; port_phasestep : STRING; port_phaseupdown : STRING; port_pllena : STRING; port_scanaclr : STRING; port_scanclk : STRING; port_scanclkena : STRING; port_scandata : STRING; port_scandataout : STRING; port_scandone : STRING; port_scanread : STRING; port_scanwrite : STRING; port_clk0 : STRING; port_clk1 : STRING; port_clk2 : STRING; port_clk3 : STRING; port_clk4 : STRING; port_clk5 : STRING; port_clkena0 : STRING; port_clkena1 : STRING; port_clkena2 : STRING; port_clkena3 : STRING; port_clkena4 : STRING; port_clkena5 : STRING; port_extclk0 : STRING; port_extclk1 : STRING; port_extclk2 : STRING; port_extclk3 : STRING; self_reset_on_loss_lock : STRING; width_clock : NATURAL ); PORT ( areset : IN STD_LOGIC ; clk : OUT STD_LOGIC_VECTOR (4 DOWNTO 0); inclk : IN STD_LOGIC_VECTOR (1 DOWNTO 0); locked : OUT STD_LOGIC ); END COMPONENT; BEGIN sub_wire5_bv(0 DOWNTO 0) <= "0"; sub_wire5 <= To_stdlogicvector(sub_wire5_bv); locked <= sub_wire0; sub_wire2 <= sub_wire1(0); c0 <= sub_wire2; sub_wire3 <= inclk0; sub_wire4 <= sub_wire5(0 DOWNTO 0) & sub_wire3; altpll_component : altpll GENERIC MAP ( bandwidth_type => "AUTO", clk0_divide_by => 1, clk0_duty_cycle => 50, clk0_multiply_by => 2, clk0_phase_shift => "0", compensate_clock => "CLK0", inclk0_input_frequency => 20000, intended_device_family => "Cyclone IV E", lpm_hint => "CBX_MODULE_PREFIX=pll", lpm_type => "altpll", operation_mode => "NORMAL", pll_type => "AUTO", port_activeclock => "PORT_UNUSED", port_areset => "PORT_USED", port_clkbad0 => "PORT_UNUSED", port_clkbad1 => "PORT_UNUSED", port_clkloss => "PORT_UNUSED", port_clkswitch => "PORT_UNUSED", port_configupdate => "PORT_UNUSED", port_fbin => "PORT_UNUSED", port_inclk0 => "PORT_USED", port_inclk1 => "PORT_UNUSED", port_locked => "PORT_USED", port_pfdena => "PORT_UNUSED", port_phasecounterselect => "PORT_UNUSED", port_phasedone => "PORT_UNUSED", port_phasestep => "PORT_UNUSED", port_phaseupdown => "PORT_UNUSED", port_pllena => "PORT_UNUSED", port_scanaclr => "PORT_UNUSED", port_scanclk => "PORT_UNUSED", port_scanclkena => "PORT_UNUSED", port_scandata => "PORT_UNUSED", port_scandataout => "PORT_UNUSED", port_scandone => "PORT_UNUSED", port_scanread => "PORT_UNUSED", port_scanwrite => "PORT_UNUSED", port_clk0 => "PORT_USED", port_clk1 => "PORT_UNUSED", port_clk2 => "PORT_UNUSED", port_clk3 => "PORT_UNUSED", port_clk4 => "PORT_UNUSED", port_clk5 => "PORT_UNUSED", port_clkena0 => "PORT_UNUSED", port_clkena1 => "PORT_UNUSED", port_clkena2 => "PORT_UNUSED", port_clkena3 => "PORT_UNUSED", port_clkena4 => "PORT_UNUSED", port_clkena5 => "PORT_UNUSED", port_extclk0 => "PORT_UNUSED", port_extclk1 => "PORT_UNUSED", port_extclk2 => "PORT_UNUSED", port_extclk3 => "PORT_UNUSED", self_reset_on_loss_lock => "OFF", width_clock => 5 ) PORT MAP ( areset => areset, inclk => sub_wire4, locked => sub_wire0, clk => sub_wire1 ); END SYN; -- ============================================================ -- CNX file retrieval info -- ============================================================ -- Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0" -- Retrieval info: PRIVATE: BANDWIDTH STRING "1.000" -- Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "1" -- Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz" -- Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low" -- Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1" -- Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0" -- Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0" -- Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0" -- Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0" -- Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0" -- Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0" -- Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0" -- Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0" -- Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "c0" -- Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "7" -- Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "1" -- Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000" -- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE0 STRING "100.000000" -- Retrieval info: PRIVATE: EXPLICIT_SWITCHOVER_COUNTER STRING "0" -- Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0" -- Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1" -- Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "0" -- Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0" -- Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575" -- Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1" -- Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "50.000" -- Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz" -- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000" -- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1" -- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1" -- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz" -- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E" -- Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1" -- Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "1" -- Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1" -- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "Not Available" -- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0" -- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg" -- Retrieval info: PRIVATE: MIG_DEVICE_SPEED_GRADE STRING "Any" -- Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0" -- Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "2" -- Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1" -- Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "100.00000000" -- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "0" -- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz" -- Retrieval info: PRIVATE: PHASE_RECONFIG_FEATURE_ENABLED STRING "1" -- Retrieval info: PRIVATE: PHASE_RECONFIG_INPUTS_CHECK STRING "0" -- Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000" -- Retrieval info: PRIVATE: PHASE_SHIFT_STEP_ENABLED_CHECK STRING "0" -- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "deg" -- Retrieval info: PRIVATE: PLL_ADVANCED_PARAM_CHECK STRING "0" -- Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "1" -- Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1" -- Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0" -- Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0" -- Retrieval info: PRIVATE: PLL_FBMIMIC_CHECK STRING "0" -- Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0" -- Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0" -- Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0" -- Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0" -- Retrieval info: PRIVATE: RECONFIG_FILE STRING "pll.mif" -- Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0" -- Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "1" -- Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "0" -- Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0" -- Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0" -- Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000" -- Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz" -- Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500" -- Retrieval info: PRIVATE: SPREAD_USE STRING "0" -- Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0" -- Retrieval info: PRIVATE: STICKY_CLK0 STRING "1" -- Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1" -- Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "1" -- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0" -- Retrieval info: PRIVATE: USE_CLK0 STRING "1" -- Retrieval info: PRIVATE: USE_CLKENA0 STRING "0" -- Retrieval info: PRIVATE: USE_MIL_SPEED_GRADE NUMERIC "0" -- Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0" -- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all -- Retrieval info: CONSTANT: BANDWIDTH_TYPE STRING "AUTO" -- Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "1" -- Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50" -- Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "2" -- Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0" -- Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0" -- Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "20000" -- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E" -- Retrieval info: CONSTANT: LPM_TYPE STRING "altpll" -- Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL" -- Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO" -- Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_USED" -- Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED" -- Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_USED" -- Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_PHASEDONE STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_PHASESTEP STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED" -- Retrieval info: CONSTANT: PORT_clk1 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_clk2 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_clk3 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_clk4 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_clk5 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_clkena0 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_clkena1 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_clkena2 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_clkena3 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_clkena4 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_clkena5 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_extclk0 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED" -- Retrieval info: CONSTANT: SELF_RESET_ON_LOSS_LOCK STRING "OFF" -- Retrieval info: CONSTANT: WIDTH_CLOCK NUMERIC "5" -- Retrieval info: USED_PORT: @clk 0 0 5 0 OUTPUT_CLK_EXT VCC "@clk[4..0]" -- Retrieval info: USED_PORT: @inclk 0 0 2 0 INPUT_CLK_EXT VCC "@inclk[1..0]" -- Retrieval info: USED_PORT: areset 0 0 0 0 INPUT GND "areset" -- Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0" -- Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0" -- Retrieval info: USED_PORT: locked 0 0 0 0 OUTPUT GND "locked" -- Retrieval info: CONNECT: @areset 0 0 0 0 areset 0 0 0 0 -- Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0 -- Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0 -- Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0 -- Retrieval info: CONNECT: locked 0 0 0 0 @locked 0 0 0 0 -- Retrieval info: GEN_FILE: TYPE_NORMAL pll.vhd TRUE -- Retrieval info: GEN_FILE: TYPE_NORMAL pll.ppf TRUE -- Retrieval info: GEN_FILE: TYPE_NORMAL pll.inc FALSE -- Retrieval info: GEN_FILE: TYPE_NORMAL pll.cmp FALSE -- Retrieval info: GEN_FILE: TYPE_NORMAL pll.bsf FALSE -- Retrieval info: GEN_FILE: TYPE_NORMAL pll_inst.vhd FALSE -- Retrieval info: LIB_FILE: altera_mf -- Retrieval info: CBX_MODULE_PREFIX: ON
Go to most recent revision | Compare with Previous | Blame | View Log