Subversion Repositories blue

#:C159   
#Xilinx FPGA Editor Command Log File
#Editor Version:
#:V   NT M2.1 I.34
#Current Working Directory:
#:D   C:\blue8
#Date/Time:
#:T   Tue Oct 03 00:03:37 2006
#------------------------------
        #Reading topbox.ncd...
        #Loading device for application Rf_Device from file '3s200.nph' in environment C:\Xilinx;C:\Xilinx.
        #   "topbox" is an NCD, version 3.1, device xc3s200, package ft256, speed -4
        #Building chip graphics...
        #Loading speed info...
        #1
setattr main edit-mode no-logic-changes
        #2
select -k cst 'COMP "xmaddress<0>" LOCATE = SITE "L5" LEVEL 1'
        #3
unselect cst 'COMP "xmaddress<0>" LOCATE = SITE "L5" LEVEL 1'
        #4
select -k cst 'COMP "xmaddress<1>" LOCATE = SITE "N3" LEVEL 1'
        #5
unselect cst 'COMP "xmaddress<1>" LOCATE = SITE "N3" LEVEL 1'
        #6
select -k cst 'COMP "xmaddress<0>" LOCATE = SITE "L5" LEVEL 1'
        #7
hilite
        #8
delay
        #ERROR:FPGAEditor:201 - The delay command can be used only when pins or nets are selected
        #.Select two pins, or one or more nets and try again.
        #9
post probes
        #10
unpost probes
        #11
unhilite -all
        #12
setattr main disable_draw on
        #13
setattr layer long_lines view on
        #14
setattr main disable_draw off
        #Hint: change the visibility of more than one layer at a time by clicking on the apply button, clicking two or more layer buttons, and then clicking on the apply button again.
        #15
setattr main disable_draw on
        #16
setattr layer local_lines view on
        #17
setattr main disable_draw off
        #18
setattr main disable_draw on
        #19
setattr layer pinwires view on
        #20
setattr main disable_draw off
        #21
setattr main disable_draw on
        #22
setattr layer pips view on
        #23
setattr main disable_draw off
        #24
setattr main disable_draw on
        #25
setattr layer switch_boxes view on
        #26
setattr main disable_draw off
        #27
setattr main disable_draw on
        #28
setattr layer routes view on
        #29
setattr main disable_draw off
        #30
setattr main disable_draw on
        #31
setattr layer ratsnests view on
        #32
setattr main disable_draw off
        #33
setattr main disable_draw on
        #34
setattr layer text view on
        #35
setattr main disable_draw off
        #36
setattr main disable_draw on
        #37
setattr layer ratsnests view off
        #38
setattr main disable_draw off
        #39
setattr main disable_draw on
        #40
setattr layer text view off
        #41
setattr main disable_draw off
        #42
setattr main disable_draw on
        #43
setattr layer switch_boxes view off
        #44
setattr main disable_draw off
        #45
setattr main disable_draw on
        #46
setattr layer sites view off
        #47
setattr main disable_draw off
        #48
setattr main disable_draw on
        #49
setattr layer pips view off
        #50
setattr main disable_draw off
        #51
setattr main disable_draw on
        #52
setattr layer pinwires view off
        #53
setattr main disable_draw off
        #54
setattr main disable_draw on
        #55
setattr layer long_lines view off
        #56
setattr main disable_draw off
        #57
setattr main disable_draw on
        #58
setattr layer local_lines view off
        #59
setattr main disable_draw off
        #60
setattr main disable_draw on
        #61
setattr layer switch_boxes view on
        #62
setattr main disable_draw off
        #63
setattr main disable_draw on
        #64
setattr layer switch_boxes view off
        #65
setattr main disable_draw off
        #66
setattr main disable_draw on
        #67
setattr layer components view off
        #68
setattr main disable_draw off
        #69
setattr main disable_draw on
        #70
setattr layer routes view off
        #71
setattr main disable_draw off
        #72
setattr main disable_draw on
        #73
setattr layer routes view on
        #74
setattr main disable_draw off
        #75
setattr main disable_draw on
        #76
setattr layer routes view off
        #77
setattr main disable_draw off
        #78
delay
        #ERROR:FPGAEditor:201 - The delay command can be used only when pins or nets are selected
        #.Select two pins, or one or more nets and try again.
        #79
drc
        #DRC - No errors found.
        #WARNING:FPGAEditor:221 - DRC - Did not examine 1 uncheckable objects in the selection.
        #80
post ila
        #Building all ILA Capture Units ...
        #81
unpost ila
        #82
post probes
        #83
probe add CPU/cp<2> -noroute
        #The probe command requires a read/write edit mode.
        #Do you want to change the edit mode?
        #84
unpost probes
        #85
setattr main disable_draw on
        #86
setattr layer local_lines view off
        #87
setattr main disable_draw off
        #88
setattr main disable_draw on
        #89
setattr layer local_lines view on
        #90
setattr main disable_draw off
        #91
setattr main disable_draw on
        #92
setattr layer long_lines view off
        #93
setattr main disable_draw off
        #94
setattr main disable_draw on
        #95
setattr layer long_lines view on
        #96
setattr main disable_draw off
        #97
setattr main disable_draw on
        #98
setattr layer pinwires view off
        #99
setattr main disable_draw off
        #100
setattr main disable_draw on
        #101
setattr layer pinwires view on
        #102
setattr main disable_draw off
        #103
setattr main disable_draw on
        #104
setattr layer pips view off
        #105
setattr main disable_draw off
        #106
setattr main disable_draw on
        #107
setattr layer pips view on
        #108
setattr main disable_draw off
        #109
setattr main disable_draw on
        #110
setattr layer sites view off
        #111
setattr main disable_draw off
        #112
setattr main disable_draw on
        #113
setattr layer sites view on
        #114
setattr main disable_draw off
        #115
setattr main disable_draw on
        #116
setattr layer switch_boxes view off
        #117
setattr main disable_draw off
        #118
setattr main disable_draw on
        #119
setattr layer switch_boxes view on
        #120
setattr main disable_draw off
        #121
setattr main disable_draw on
        #122
setattr layer components view off
        #123
setattr main disable_draw off
        #124
setattr main disable_draw on
        #125
setattr layer components view on
        #126
setattr main disable_draw off
        #127
setattr main disable_draw on
        #128
setattr layer routes view off
        #129
setattr main disable_draw off
        #130
setattr main disable_draw on
        #131
setattr layer routes view on
        #132
setattr main disable_draw off
        #133
setattr main disable_draw on
        #134
setattr layer ratsnests view off
        #135
setattr main disable_draw off
        #136
setattr main disable_draw on
        #137
setattr layer ratsnests view on
        #138
setattr main disable_draw off
        #139
unselect -all
        #140
select wire 'IOBOUTPUT(40184,42512)'
        #node = IOBOUTPUT(40184,42512)
        #141
unselect -all
        #142
select wire 'IOBOUTPUT(40184,42512)'
        #node = IOBOUTPUT(40184,42512)
        #143
unselect -all
        #144
select wire 'IOBOUTPUT(40184,42512)'
        #node = IOBOUTPUT(40184,42512)
        #145
post block
        #ERROR:FPGAEditor:79 - The "post block" command without any other arguments cannot
        #be performed unless the selection contains only a single site
        #or single component.  Change the selection and try again.
        #146
unselect -all
        #147
unselect -all
        #148
unselect -all
        #149
select wire 'DUMMYESC(40025,42520)'
        #node = DUMMYESC(40025,42520)
        #150
unselect -all
        #151
select wire 'CLKPIN(40184,42480)'
        #node = CLKPIN(40184,42480)
        #152
unselect -all
        #153
select wire 'CLKPIN(40184,42488)'
        #node = CLKPIN(40184,42488)
        #154
unselect -all
        #155
unselect -all
        #156
select wire 'INPUT(40184,42432)'
        #node = INPUT(40184,42432)
        #157
unselect -all
        #158
select site 'NOPAD10'
        #site "NOPAD10",  unbonded type = IOB,  pad name = NOPAD10  (RPM grid X60Y102)
        #159
unselect -all
        #160
select site 'UNB42'
        #site "UNB42",  unbonded type = DIFFS,  pad name = PAD42  (RPM grid X51Y101)
        #161
unselect -all
        #162
unselect -all
        #163
select wire 'HUNIHEX(20008,26265)'
        #node = HUNIHEX(20008,26265)
        #164
unselect -all
        #165
select wire 'HUNIHEX(20008,26265)'
        #node = HUNIHEX(20008,26265)
        #166
unselect -all
        #167
select wire 'HFULLHEX(20024,26237)'
        #node = HFULLHEX(20024,26237)