OpenCores
URL https://opencores.org/ocsvn/blue/blue/trunk

Subversion Repositories blue

[/] [blue/] [trunk/] [blue8/] [xblue.restore] - Rev 4

Go to most recent revision | Compare with Previous | Blame | View Log

# version: 10.1.03
# Project Navigator Project Restoration Script
#
# WARNING: Do not modify this file. Any alteration of this file is not
# supported and will likely cause project restoration to fail. The 
# format and the contents will be modified without further notice.
#
# This script can be used to recreate the associated project. To use this script,
# source it in a Xilinx Tcl shell, such as xtclsh or the Project Navigator Tcl
# Shell tab, and call the 'restore' proc. Restore takes the project directory as
# an optional argument. Pass in the project directory if it is different than the
# current working directory, otherwise don't pass in anything.
#
# Example:
# In this example the project is in the directory "./projects/m_project_dir".
#
#  source ./projects/m_project_dir/my_project.restore
#  restore ./projects/m_project_dir
#
# Example:
# In this example the project is in the current working directory.
#
#  source my_project.restore
#  restore
#
# Note that restoring a project this way has the following limitations:
# - Process status will not be restored.
# - A root-level source will be set as "Top", even if a lower-level source had
#   previously been set as "Top".
# - Sources with non-default Design View associations will revert to the default
#   association.
# - Snapshots will not be restored.
#
# The project which failed to load will be backed up as <project>.fail.
# Please open a Technical Support WebCase at
# www.xilinx.com/support/clearexpress/websupport.htm and submit this file, along
# with the project source files, for evaluation.
#
# Copyright 2007, Xilinx, Inc.


proc ERR { msg } {
   puts "ERROR: $msg"
}

proc WARN { msg } {
   puts "WARNING: $msg"
}

proc INFO { msg } {
   puts "$msg"
}

# Helper that returns 1 if the string is blank, otherwise 0.
proc IsBlank { str } {
   if { [string length $str] == 0 } {
      return 1
   }
   return 0
}

# Helper for determining whether a value is 'NULL'.
# Returns 1 if the value is 0; returns 0 if the value is anything else.
proc IsNull { val } {
   if { $val == 0 } {
      return 1
   }
   return 0
}

proc HandleException { script { msg "" } } {
   set catch_result [catch {
      uplevel 1 $script
   } RESULT]
   if {$catch_result} {
      if {![IsBlank $msg]} {
         ERR $msg
      }
      INFO "$RESULT"
      INFO "$::errorInfo"
   }
}

# These two procs help to load shared libraries in a platform
# independent way.
proc _LoadLibrary {name} {
   set libExt [info sharedlibextension]
   set libFullName "$name$libExt"
   HandleException {
      load $libFullName
   } "A problem occured loading library $libFullName."
}

proc _LoadFactoryLibrary {Factory} {
   HandleException {
      Xilinx::Cit::FactoryLoad $Factory
   } "A problem occured loading library $Factory."
}

_LoadLibrary libCit_CoreStub
_LoadLibrary libPrjrep_CommonStub
_LoadFactoryLibrary libPrjrep_Common
_LoadLibrary libDpm_SupportStub
_LoadLibrary libDpm_PnfStub
_LoadLibrary libDpm_DefnDataStub
_LoadLibrary libDpm_DesignDataStub
_LoadLibrary libDpm_HdlStub
_LoadLibrary libPrjrep_RepositoryStub
_LoadLibrary libCitI_CoreStub
_LoadLibrary libHdcI_HdcHDProjectStub
_LoadLibrary libTcltaskI_TaskStub
_LoadLibrary libCommonI_CommonStub
_LoadFactoryLibrary libTcltask_Helpers
_LoadFactoryLibrary libHdcC_HDProject
_LoadLibrary libHdcI_HdcContainerStub
_LoadLibrary libGuiI_Stub

#  Helper to exectute code only when the (pointer) variable name is valid.
proc OnOkPtr { var_name script } {
   if { [ uplevel info exists $var_name ] } {
      upvar $var_name var
      if { $var != 0 } { return [ uplevel $script ] }
   }
}

#  Helper to exectute code only when the (pointer) variable name is 0.
proc OnNullPtr { var_name script } {
   if { [ uplevel info exists $var_name ] } {
      upvar $var_name var
      if { $var == 0 } { return [ uplevel $script ] }
   }
}

#  Helper to exectute code only when the value of variable name is 1.
proc OnSuccess { var_name script } {
   if { $val != 0 } { return [ uplevel $script ] }
}

#  Helper to exectute code only when the value of variable name is 0.
proc OnFail { val script } {
   if { $val != 1 } { return [ uplevel $script ] }
}

#  Helper to get a component interface.
proc GetInterface { iUnk id { name "" } } {
   if {$iUnk == 0} { return 0 }
   set iIface [ $iUnk GetInterface $id ]
   OnNullPtr iIface {
      if {![IsBlank $name]} {
         ERR " Could not get the \"$name\" interface."
      }
   }
   return $iIface
}

#  Helper to create a component and return one of its interfaces.
proc CreateComponent { compId ifaceId { name "" } } {
   set iUnk [ ::Xilinx::Cit::FactoryCreate $compId ]
   set iIface [ GetInterface $iUnk $ifaceId ]
   OnNullPtr iIface {
      if {![IsBlank $name]} { ERR "Could not create a \"$name\" component." }
   }
   return $iIface
}

#  Helper to release an object
proc Release { args } {
   foreach iUnk $args {
      set i_refcount [ GetInterface $iUnk $::xilinx::Prjrep::IRefCountID ]
      OnNullPtr i_refcount { set i_refcount [ GetInterface $iUnk $::xilinx::CommonI::IRefCountID ] }
      OnOkPtr i_refcount { $i_refcount Release }
   }
}

#  Helper to loop over IIterator based pointers.
proc ForEachIterEle { _ele_var_name _iter script } {
   if {$_iter == 0} { return 0 }
   upvar $_ele_var_name ele
   for { $_iter First } { ![ $_iter IsEnd ] } { $_iter Next }  {
      set ele [ $_iter CurrentItem ]
      set returned_val [ uplevel $script ] 
   }
}

#  Helper to get the Tcl Project Manager, if possible.
proc GetTclProjectMgr { } {
   set TclProjectMgrId "{7d528480-1196-4635-aba9-639446e4aa59}"
   set iUnk [ Xilinx::CitP::CreateComponent $TclProjectMgrId ]
   if {$iUnk == 0} { return 0 }
   set iTclProjectMgr [ $iUnk GetInterface $::xilinx::TcltaskI::ITclProjectMgrID ]
   OnNullPtr iTclProjectMgr {
      ERR "Could not create a \"TclProjectMgr\" component."
   }
   return $iTclProjectMgr
}

#  Helper to get the current Tcl Project, if one is open.
proc GetCurrentTclProject { } {
   set iTclProject 0
   set iTclProjectMgr [GetTclProjectMgr]
   OnOkPtr iTclProjectMgr {
      set errmsg ""
      $iTclProjectMgr GetCurrentTclProject iTclProject errmsg
   }
   return $iTclProject
}

#  Helper to get the current HDProject, if one is open.
proc GetCurrentHDProject { } {
   set iHDProject 0
   set iTclProjectMgr [GetTclProjectMgr]
   set errmsg ""
   OnOkPtr iTclProjectMgr { $iTclProjectMgr GetCurrentHDProject iHDProject errmsg }
   OnNullPtr iHDProject {
      ERR "Could not get the current HDProject."
   }
   return $iHDProject
}

#  Helper to create a Project Helper.
proc GetProjectHelper { } {
   set ProjectHelperID "{0725c3d2-5e9b-4383-a7b6-a80c932eac21}"
   set iProjHelper [CreateComponent $ProjectHelperID $::xilinx::Dpm::IProjectHelperID "Project Helper"]
   return $iProjHelper
}

#  Helper to find out if a project is currently open.
#  Returns 1 if a project is open, otherwise 0.
proc IsProjectOpen { } {
   set iTclProject [GetCurrentTclProject]
   set isOpen [expr {$iTclProject != 0}]
   Release $iTclProject
   return $isOpen
}

#  Helper to return the lock file for the specified project if there is one.
#  Returns an empty string if there is no lock file on the specified project,
#  or there is no corresponding .ise file
#  This assumes that the project_file is in the current directory.
#  It also assumes project_file does not have a path.
proc GetProjectLockFile { project_file } {
   if { ![ file isfile "$project_file" ] } {
      return 
   }
   INFO "Checking for a lock file for \"$project_file\"."
   set lock_file "__ISE_repository_${project_file}_.lock"
   if { [ file isfile "$lock_file" ] } {
      return $lock_file
   }
   return 
}

#  Helper to back up the project file.
#  This assumes that the project_file is in the current directory.
proc BackUpProject { project_file backup_file } {
   if { ![ file isfile "$project_file" ] } {
      WARN "Could not find \"$project_file\"; the project will not be backed up."
   return 0
   } else {
      INFO "Backing up the project to \"$backup_file\"."
      file copy -force "$project_file" "$backup_file"
   }
   return 1
}

#  Helper to remove the project file so that a new project can be created
#  in its place. Presumably the old project is corrupted and can no longer
#  be opened.
proc RemoveProject { project_file } {
   file delete -force "$project_file"
   # Return failure if the project still exists.
   if { [ file isfile "$project_file" ] } {
      ERR "Could not remove \"$project_file\"; Unable to restore the project."
      return 0
   }
   return 1
}

#  Helper to open a project and return a project facilitator (pointer).
proc OpenFacilProject { project_name } {
   # first make sure the tcl project mgr singleton exists
   GetTclProjectMgr
   # get a Project Helper and open the project.
   set iProjHelper [GetProjectHelper]
   if {$iProjHelper == 0} { return 0 }
   set result [$iProjHelper Open $project_name]
   OnFail $result {
      if {$result == 576460769483292673} {
         ERR "Could not open the project \"$project_name\" because it is locked."
      } else {
         ERR "Could not open the \"$project_name\" project."
      }
      Release $iProjHelper
      set iProjHelper 0
   }
   return $iProjHelper
}

#  Helper to close and release a project.
proc CloseFacilProject { iProjHelper } {
   if {$iProjHelper == 0} { return }
   $iProjHelper Close
   Release $iProjHelper
}

#  Helper to get the Project from the Project Helper.
#  Clients must release this.
proc GetProject { iProjHelper } {
   if {$iProjHelper == 0} { return 0 }
   set dpm_project 0
   $iProjHelper GetDpmProject dpm_project
   set iProject [ GetInterface $dpm_project $xilinx::Dpm::IProjectID ]
   OnNullPtr iProject {
      ERR "Could not get the Project from the Project Helper."
   }
   return $iProject
}

#  Helper to get the File Manager from the Project Helper.
#  Clients must release this.
proc GetFileManager { iProjHelper } {
   set iProject [GetProject $iProjHelper]
   set iFileMgr [ GetInterface $iProject $xilinx::Dpm::IFileManagerID ]
   OnNullPtr iFileMgr {
      ERR "Could not get the File Manager from the Project Helper."
   }
   # Don't release the project here, clients will release it 
   # when they release its IFileManager interface.
   return $iFileMgr
}

#  Helper to get the Source Library Manager from the Project Helper.
#  Clients must release this.
proc GetSourceLibraryManager { iProjHelper } {
   set iProject [GetProject $iProjHelper]
   set iSourceLibraryMgr [ GetInterface $iProject $xilinx::Dpm::ISourceLibraryManagerID ]
   OnNullPtr iSourceLibraryMgr {
      ERR "Could not get the Source Library Manager from the Project Helper."
   }
   # Don't release the project here, clients will release it 
   # when they release its IFileManager interface.
   return $iSourceLibraryMgr
}

#  Helper to get the ProjSrcHelper from the Project Helper.
#  Clients must NOT release this.
proc GetProjSrcHelper { iProjHelper } {
   set iSrcHelper [ GetInterface $iProjHelper $::xilinx::Dpm::IProjSrcHelperID IProjSrcHelper ]
   OnNullPtr iSrcHelper {
      ERR "Could not get the ProjSrcHelper from the Project Helper."
   }
   return $iSrcHelper
}

#  Helper to get the ScratchPropertyManager from the Project Helper.
#  Clients must NOT release this.
proc GetScratchPropertyManager { iProjHelper } {
   set iPropTableFetch [ GetInterface $iProjHelper $xilinx::Dpm::IPropTableFetchID IPropTableFetch ]
   set prop_table_comp 0
   OnOkPtr iPropTableFetch {
      $iPropTableFetch GetPropTable prop_table_comp
   }
   set iScratch [ GetInterface $prop_table_comp $xilinx::Dpm::IScratchPropertyManagerID ]
   OnNullPtr iScratch {
      ERR "Could not get the Scratch Property Manager from the Project Helper."
   }
   return $iScratch
}

#  Helper to get the Design from the Project Helper.
#  Clients must release this.
proc GetDesign { iProjHelper } {
   set iProject [GetProject $iProjHelper]
   set iDesign 0
   OnOkPtr iProject { $iProject GetDesign iDesign }
   OnNullPtr iDesign {
      ERR "Could not get the Design from the Project Helper."
   }
   Release $iProject
   return $iDesign
}

#  Helper to get the Data Store from the Project Helper.
#  Clients must NOT release this.
proc GetDataStore { iProjHelper } {
   set iDesign [ GetDesign $iProjHelper]
   set iDataStore 0
   OnOkPtr iDesign { $iDesign GetDataStore iDataStore }
   OnNullPtr iDataStore {
      ERR "Could not get the Data Store from the Project Helper."
   }
   Release $iDesign
   return $iDataStore
}

#  Helper to get the View Manager from the Project Helper.
#  Clients must NOT release this.
proc GetViewManager { iProjHelper } {
   set iDesign [ GetDesign $iProjHelper]
   set iViewMgr [ GetInterface $iDesign $xilinx::Dpm::IViewManagerID ]
   OnNullPtr iViewMgr {
      ERR "Could not get the View Manager from the Project Helper."
   }
   # Don't release the design here, clients will release it 
   # when they release its IViewManager interface.
   return $iViewMgr
}

#  Helper to get the Property Manager from the Project Helper.
#  Clients must release this.
proc GetPropertyManager { iProjHelper } {
   set iDesign [ GetDesign $iProjHelper]
   set iPropMgr 0
   OnOkPtr iDesign { $iDesign GetPropertyManager iPropMgr }
   OnNullPtr iPropMgr {
      ERR "Could not get the Property Manager from the Project Helper."
   }
   Release $iDesign
   return $iPropMgr
}

#  Helper to find a property template, based on prop_name
#  Clients must NOT release this.
proc GetPropertyTemplate { iProjHelper prop_name } {
   set iPropTempl 0
   set iUnk 0
   set iDefdataId 0
   set iPropTemplStore 0
   set iDataStore [GetDataStore $iProjHelper]
   OnOkPtr iDataStore { $iDataStore GetComponentByName $prop_name iUnk }
   OnOkPtr iUnk { set iDefdataId [ GetInterface $iUnk $xilinx::Dpm::IDefDataIdID IDefDataId ] }
   OnOkPtr iDefdataId {
      set iPropTemplStore [ GetInterface $iDataStore $xilinx::Dpm::IPropertyTemplateStoreID IPropertyTemplateStore ]
   }
   OnOkPtr iPropTemplStore { $iPropTemplStore GetPropertyTemplate $iDefdataId iPropTempl }
   OnNullPtr iPropTempl {
      WARN "Could not get the property template for \"$prop_name\"."
   }
   return $iPropTempl
}

#  Helper to get a component's name.
proc GetName { iUnk } {
   set name ""
   set iName [ GetInterface $iUnk $xilinx::Prjrep::INameID IName ]
   OnOkPtr iName { $iName GetName name }
   return $name
}

#  Helper to get the name of a view's type.
proc GetViewTypeName { iView } {
   set typeName ""
   set iType 0
   set iDefdataType 0
   OnOkPtr iView { $iView GetType iType }
   OnOkPtr iType {
      set iDefdataType [ GetInterface $iType $xilinx::Dpm::IDefDataIdID IDefDataId ]
   }
   OnOkPtr iDefdataType { $iDefdataType GetID typeName }
   return $typeName
}

#  Helper to find a view and return its context.
#  Must clients release this?
proc GetViewContext { iProjHelper view_id view_name } {
   # Simply return if the view_id or view_name is empty.
   if { [IsBlank $view_id] || [IsBlank $view_name] } { return 0 }
   set foundview 0
   set viewiter 0
   set iViewMgr [GetViewManager $iProjHelper]
   OnOkPtr iViewMgr { $iViewMgr GetViews viewiter }
   ForEachIterEle view $viewiter {
      set typeName [GetViewTypeName $view]
      set name [GetName $view]
      if { [ string equal $name $view_name ] && [ string equal $view_id $typeName ] } {
         set foundview $view
      }
   }
   set context [ GetInterface $foundview $xilinx::Dpm::IPropertyContextID ]
   OnNullPtr context {
      WARN "Could not get the context for view \"$view_id\":\"$view_name\"."
   }
   return $context
}

#  Helper to get a string property instance from the property manager.
proc GetStringPropertyInstance { iProjHelper simple_id } {
   set iPropMgr [GetPropertyManager $iProjHelper]
   if {$iPropMgr == 0} { return 0 }
   set iPropInst 0
   $iPropMgr GetStringProperty $simple_id iPropInst
   OnNullPtr iPropInst { WARN "Could not get the string property instance $simple_id." }
   Release $iPropMgr
   return $iPropInst
}

#  Helper to get a property instance from the property manager.
proc GetPropertyInstance { iProjHelper view_name view_id prop_name } {
   set iPropInst 0
   set iPropTempl [ GetPropertyTemplate $iProjHelper $prop_name ]
   if {$iPropTempl == 0} { return 0 }
   set context [ GetViewContext $iProjHelper $view_id $view_name ]
   set iPropMgr [GetPropertyManager $iProjHelper]
   if {$iPropMgr == 0} { return 0 }
   $iPropMgr GetPropertyInstance $iPropTempl $context iPropInst
   OnNullPtr iPropInst {
      if { ![IsBlank $view_id] && ![IsBlank $view_name] } {
         WARN "Could not get the context sensitive property instance $prop_name."
      } else {
         WARN "Could not get the property instance $prop_name."
      }
   }
   Release $iPropMgr
   return $iPropInst
}

#  Helper to store properties back into the property manager.
proc RestoreProcessProperties { iProjHelper process_props } {
   INFO "Restoring process properties"
   foreach { unused view_name view_id simple_id prop_name prop_val } $process_props {
      set iPropInst 0
      if {![IsBlank $simple_id]} {
         set iPropInst [ GetStringPropertyInstance $iProjHelper $simple_id ]
      } else {
         set iPropInst [ GetPropertyInstance $iProjHelper $view_name $view_id $prop_name ]
      }
      OnOkPtr iPropInst {
         OnFail [ $iPropInst SetStringValue "$prop_val" ] {
            WARN "Could not set the value of the $prop_name property to \"$prop_val\"."
         }
      }
      Release $iPropInst
   }
}

#  Helper to recreate partitions from the variable name with
#  a list of instance names.
proc RestorePartitions { namelist } {
   INFO "Restoring partitions."
   set iHDProject [ GetCurrentHDProject ]
   OnOkPtr iHDProject {
      foreach name $namelist {
         set iPartition [ $iHDProject CreatePartition "$name" ]
      }
   }
}

#  Helper to create and populate a library
#
proc CreateLibrary { iProjHelper libname filelist } {

   set iLibMgr [ GetSourceLibraryManager $iProjHelper ]
   set iFileMgr [ GetFileManager $iProjHelper ]

   if {$iLibMgr == 0} { return 0 }
   if {$iFileMgr == 0} { return 0 }

   $iLibMgr CreateSourceLibrary "libname" ilib

   OnOkPtr ilib {
      foreach filename $filelist {
         set argfile [ file normalize "$filename" ]
         set found 0
         set fileiter 0
         $iFileMgr GetFiles fileiter
         ForEachIterEle ifile $fileiter {
            set path ""
            set file ""
            $ifile getPath path file
            set currentfile [ file normalize [ file join "$path" "$file" ] ]
            if { $currentfile == $argfile } {
               set found 1
               $ilib AddFile ifile
               break
            }
         }
         OnNullPtr found {
            WARN "Could not add the file \"$filename\" to the library \"$libname\"."
         }
      }
   }
}

#  Helper to create source libraries and populate them.
proc RestoreSourceLibraries { iProjHelper libraries } {
   INFO "Restoring source libraries."
   foreach { libname filelist } $libraries {
      CreateLibrary $iProjHelper "$libname" $filelist
   }
}

# Helper to add user files to the project using the PnF.
proc AddUserFiles { iProjHelper files } {
   INFO "Adding User files."
   set iconflict 0
   set iSrcHelper [ GetProjSrcHelper $iProjHelper ]
   if {$iSrcHelper == 0} { return 0 }
   foreach filename $files {
      INFO "Adding the file \"$filename\" to the project."
      set result [$iSrcHelper AddSourceFile "$filename" iconflict]
      OnFail $result {
         if {$result == 6} {
            INFO "The file \"$filename\" is already in the project."
         } else {
            ERR "A problem occurred adding the file \"$filename\" to the project."
         }
      }
   }
}

# Helper to add files to the project and set their origination. 
# Valid origination values are:
#   0 - User
#   1 - Generated
#   2 - Imported
# Files of origination "User" are added through the facilitator, 
# otherwise they are added directly to the File Manager.
proc AddImportedFiles { iProjHelper files origination } {
   switch $origination {
      0 { INFO "Adding User files." }
      1 { INFO "Adding Generated files." }
      2 { INFO "Adding Imported files." }
      default {
         ERR "Invalid parameter: origination was set to \"$origination\", but may only be 0, 1, or 2."
         return 0
      }
   }
   set iFileMgr [ GetFileManager $iProjHelper ]
   if {$iFileMgr == 0} { return 0 }
   foreach filename $files {
      set file_type 0
      set hdl_file 0
      set result [$iFileMgr AddFile "$filename" $file_type hdl_file]
      OnFail $result {
         if {$result == 6} {
            INFO "The file \"$filename\" is already in the project."
         } elseif { $hdl_file == 0 } {
            ERR "A problem occurred adding the file \"$filename\" to the project."
         }
      }
      OnOkPtr hdl_file {
         set ifile [ GetInterface $hdl_file $xilinx::Dpm::IFileID IFile ]
         OnOkPtr ifile {
            set result [ $ifile SetOrigination $origination ]
            if {$result != 1} {
               ERR "A problem occurred setting the origination of \"$filename\" to \"$origination\"."
            }
            Release $ifile
         }
      }
   }
   return 1
}

proc RestoreProjectSettings { iProjHelper project_settings } {
   INFO "Restoring device settings"
   set iScratch [GetScratchPropertyManager $iProjHelper]
   set iPropIter 0
   set iPropSet [ GetInterface $iScratch $xilinx::Dpm::IPropertyNodeSetID IPropertyNodeSet ]
   OnOkPtr iPropSet {
      $iPropSet GetIterator iPropIter
   }
   set index 0
   set lastindex [llength $project_settings]
   ForEachIterEle prop_node $iPropIter {
      set prop_instance 0
      $prop_node GetPropertyInstance prop_instance
      if { $index < $lastindex } {
         set argname [ lindex $project_settings $index ]
         set argvalue [ lindex $project_settings [ expr $index + 1 ] ]
      } else {
         set argname {}
         set argvalue {}
      }
      if { $prop_instance != 0 } {
         set name {}
         $prop_instance GetName name
         if { [string equal $name $argname ] } {
            $prop_instance SetStringValue $argvalue
            incr index
            incr index
         }
      }
      Release $prop_instance
   }
   $iScratch Commit
   # initialize
   $iProjHelper Init
}

#  Helper to load a source control configuration from a stream
#  and then store it back into an ise file.
proc RestoreSourceControlOptions { prjfile istream } {
   INFO "Restoring source control options"
   set config_comp [::Xilinx::Cit::FactoryCreate $::xilinx::Dpm::SourceControlConfigurationCompID ]
   OnOkPtr config_comp { set ipersist [ $config_comp GetInterface $xilinx::Prjrep::IPersistID ] }
   OnOkPtr config_comp { set igetopts [ $config_comp GetInterface $xilinx::Dpm::SrcCtrl::IGetOptionsID ] }
   set helper_comp [::Xilinx::Cit::FactoryCreate $::xilinx::Dpm::SourceControlHelpCompID ]
   OnOkPtr helper_comp { set ihelper [ $config_comp GetInterface $xilinx::Dpm::SrcCtrl::IHelperID ] }
   OnOkPtr ipersist { $ipersist Load istream }
   OnOkPtr ihelper { OnOkPtr igetopts { $ihelper SaveOptions $prjfile $igetopts } }
   Release $helper_comp $config_comp
}

# put a string message in a GUI popup message dialog (if possible),
# Get a user Yes/No response. If the GUI isn't active just 'puts' 
# the message to stdout and return the default value.
#               sMessageGUI - string, the message to display in GUI environment
#               sMessageCmdLine - string, the message to display in CMdLine environment
#               defaultValue - integer, the response to return on a timeout</In>
#               hasCancel - integer, defaulting to 0. If 1, show Yes/No/Cancel buttons</In>
proc dpm_DisplayQuestionDialog { sMessageGUI sMessageCmdLine defaultValue { hasCancel 0} } {
   set iMessageDisplay 0
   if {[catch {
           set iInterface [Xilinx::CitP::GetInstance $::xilinx::GuiI::IMessageDlgID]
           set iMessageDisplay [$iInterface GetInterface $::xilinx::GuiI::IMessageDlgID]
   }]} { 
           # if we cannot get the IMessageDlgID interface then we are most likely
           # running from command line and not in the GUI.
           puts $sMessageCmdLine
   } else {
           # got a good dialog singleton
           set nTimeout 999999
           set buttonValue [$iMessageDisplay Question "Project Navigator" $sMessageGUI $hasCancel $nTimeout]
           if { $buttonValue == 2 } { ; # cancel
                   return 3
           } elseif { $buttonValue == 3 } { ; # yes
                   return 1
           } elseif { $buttonValue == 4 } { ; # no
                   return 2
           } else { # probably timeout
                   return $defaultValue
           }
   }
   return $defaultValue
}

# Call this proc to restore the ISE project.
proc restore { { project_dir "" } } {
   set script_file "xblue.restore"
   set project_file "xblue.ise"
   set backup_file "xblue.fail"
   set old_working_dir [pwd]
   # Make sure a project isn't already open.
   if {[IsProjectOpen]} {
      ERR "The project must be closed before performing this operation."
      cd $old_working_dir
      return
   }
   # If a project directory was supplied, cd into it.
   if {![IsBlank $project_dir]} {
     cd $project_dir
   }
   # capture the project directory ... it should be CWD at this point
   set project_dir [pwd]

   # before proceeding detect if lock files exist and if so ask the user what to do
   set proj_rootname [file rootname $project_file]
   set intermediate_proj_dir [file join $project_dir ${proj_rootname}_xdb]
   set proj_temp_dir [file join $intermediate_proj_dir "projtemp"]
   set repo_temp_dir [file join $proj_temp_dir $project_file]
   set new_lock_file [file join $proj_temp_dir ${project_file}.lock]
   set old_lock_file [GetProjectLockFile $project_file]
   set bLockFilesExist 0
   # see if any lock files are there
   if {[file exists $new_lock_file] || ![IsBlank "$old_lock_file" ] } {
      set bLockFilesExist 1
   }
   
   # if lock file(s) are found ask the user what to do
   if { $bLockFilesExist == 1 } { 
      set lockFileMsgGUI "The project to be restored appears to be locked. Remove Lock and continue the restore project process ?" 
      set lockFileMsgCmdLine "The project to be restored appears to be locked. Please remove the lock file \"$new_lock_file\" and try the restore process again." 
      set answer [dpm_DisplayQuestionDialog $lockFileMsgGUI $lockFileMsgCmdLine 2]
      if { $answer == 1 } {
         # remove the lock file(s) and the repo temo dir, if present
         # remove the new style lock file if it exists
         if {[file exists $new_lock_file]} {
            INFO "Removing lock file \"$new_lock_file\"."
            file delete -force $new_lock_file
         }
         # remove the old style lock file if it exists
         if {[file exists $old_lock_file]} {
            INFO "Removing lock file \"$old_lock_file\"."
            file delete -force $old_lock_file
         }
         # remove the temp proj dir if it exists
         if {[file exists $repo_temp_dir]} {
            INFO "Removing old temporary project directory \"$repo_temp_dir\"."
            file delete -force $repo_temp_dir
         }
      } else {
         # the user answered 'no' so exist without doing anything
         INFO "Exiting without restoring project."
         return
      }
   }
   
   # Backup this script because it will be overwritten the next time
   # the project is saved, which happens right after it is created!
   file copy -force "$script_file" "${script_file}.last"
   # Back up the project.
   set wasBackedUp [ BackUpProject "$project_file" "$backup_file" ]
   # Remove the project file, so that it can be recreated, since the old.
   # is presumably corrupted and can no longer be opened.
   OnFail [ RemoveProject "$project_file" ] {
      cd $old_working_dir
      return
   }

   # Open the project.
   HandleException {
      set iProjHelper [ OpenFacilProject "$project_file"]
   } "A problem occurred while creating the project \"$project_file\"."
   if {$iProjHelper == 0} {
      cd $old_working_dir
      return
   }
   INFO "Recreating project \"$project_file\"."
  set project_settings { 
     "PROP_DevFamily" "Spartan3"
     "PROP_DevDevice" "xc3s200"
     "PROP_DevPackage" "ft256"
     "PROP_DevSpeed" "-4"
     "PROP_Top_Level_Module_Type" "HDL"
     "PROP_Synthesis_Tool" "XST (VHDL/Verilog)"
     "PROP_Simulator" "Modelsim-XE Verilog"
     "PROP_PreferredLanguage" "Verilog"
     "PROP_Enable_Message_Capture" "true"
     "PROP_Enable_Message_Filtering" "false"
     "PROP_Enable_Incremental_Messaging" "false"
     }

  HandleException {
    RestoreProjectSettings $iProjHelper $project_settings 
  } "A problem occured while restoring project settings."

  set user_files { 
      "FrontPanel.v" 
      "UCF.xls" 
      "alu.v" 
      "asm2bin.awk" 
      "blue-instructions.xls" 
      "blue.pl" 
      "control.v" 
      "control1.v" 
      "idecode.v" 
      "io.v" 
      "jkff.v" 
      "maindcm.xaw" 
      "misc.v" 
      "rcvr.v" 
      "switchsync.v" 
      "tbuart.tbw" 
      "todo.txt" 
      "top.v" 
      "topbox.ucf" 
      "topbox.v" 
      "txmit.v" 
      "uart.v"}

  HandleException {
    AddUserFiles $iProjHelper $user_files
  } "A problem occured while restoring user files."

  set imported_files { 
      "topbox_last_par.ncd"}

  set origination 2

  HandleException {
    AddImportedFiles $iProjHelper $imported_files $origination
  } "A problem occured while restoring imported files."

  set process_props { 
      "A" "" "" "" "PROPEXT_SynthMultStyle_virtex2" "Auto" 
      "A" "" "" "" "PROPEXT_xilxBitgCfg_DCIUpdateMode_spartan3" "As Required" 
      "A" "" "" "" "PROPEXT_xilxBitgCfg_Rate_spartan3" "Default (6)" 
      "A" "" "" "" "PROPEXT_xilxMapGenInputK_virtex2" "4" 
      "A" "" "" "" "PROPEXT_xilxSynthAddBufg_spartan3" "8" 
      "A" "" "" "" "PROPEXT_xilxSynthMaxFanout_virtex2" "500" 
      "A" "" "" "" "PROP_AutoGenFile" "false" 
      "A" "" "" "" "PROP_BehavioralSimTop" "Module|topbox" 
      "A" "" "" "" "PROP_CPLDFitkeepio" "false" 
      "A" "" "" "" "PROP_CompxlibAbelLib" "true" 
      "A" "" "" "" "PROP_CompxlibCPLDDetLib" "true" 
      "A" "" "" "" "PROP_CompxlibOtherCompxlibOpts" "" 
      "A" "" "" "" "PROP_CompxlibOutputDir" "$XILINX/<language>/<simulator>" 
      "A" "" "" "" "PROP_CompxlibOverwriteLib" "Overwrite" 
      "A" "" "" "" "PROP_CompxlibSimPrimatives" "true" 
      "A" "" "" "" "PROP_CompxlibXlnxCoreLib" "true" 
      "A" "" "" "" "PROP_CurrentFloorplanFile" "" 
      "A" "" "" "" "PROP_DesignName" "xblue" 
      "A" "" "" "" "PROP_Dummy" "dum1" 
      "A" "" "" "" "PROP_EnableWYSIWYG" "None" 
      "A" "" "" "" "PROP_Enable_Incremental_Messaging" "false" 
      "A" "" "" "" "PROP_Enable_Message_Capture" "true" 
      "A" "" "" "" "PROP_Enable_Message_Filtering" "false" 
      "A" "" "" "" "PROP_FitterReportFormat" "HTML" 
      "A" "" "" "" "PROP_FlowDebugLevel" "0" 
      "A" "" "" "" "PROP_FunctionBlockInputLimit" "38" 
      "A" "" "" "" "PROP_ImpactProjectFile" "Default" 
      "A" "" "" "" "PROP_LastAppliedGoal" "Balanced" 
      "A" "" "" "" "PROP_LastAppliedStrategy" "Xilinx Default (unlocked)" 
      "A" "" "" "" "PROP_LastUnlockStatus" "false" 
      "A" "" "" "" "PROP_MSimSDFTimingToBeRead" "Setup Time" 
      "A" "" "" "" "PROP_ModelSimUseConfigName" "false" 
      "A" "" "" "" "PROP_Parse_Target" "synthesis" 
      "A" "" "" "" "PROP_PartitionCreateDelete" "" 
      "A" "" "" "" "PROP_PartitionForcePlacement" "" 
      "A" "" "" "" "PROP_PartitionForceSynth" "" 
      "A" "" "" "" "PROP_PartitionForceTranslate" "" 
      "A" "" "" "" "PROP_PlsClockEnable" "true" 
      "A" "" "" "" "PROP_PostMapSimTop" "Module|tbuart" 
      "A" "" "" "" "PROP_PostParSimTop" "Module|tbuart" 
      "A" "" "" "" "PROP_PostSynthSimTop" "Module|tbuart" 
      "A" "" "" "" "PROP_PostTrceFastPath" "false" 
      "A" "" "" "" "PROP_PostTrceGenDatasheet" "true" 
      "A" "" "" "" "PROP_PostTrceGenTimegroups" "false" 
      "A" "" "" "" "PROP_PostXlateSimTop" "Module|tbuart" 
      "A" "" "" "" "PROP_PreTrceFastPath" "false" 
      "A" "" "" "" "PROP_PreTrceGenDatasheet" "true" 
      "A" "" "" "" "PROP_PreTrceGenTimegroups" "false" 
      "A" "" "" "" "PROP_PreTrceTSIFile" "" 
      "A" "" "" "" "PROP_SimDo" "true" 
      "A" "" "" "" "PROP_SimModelGenerateTestbenchFile" "false" 
      "A" "" "" "" "PROP_SimModelInsertBuffersPulseSwallow" "false" 
      "A" "" "" "" "PROP_SimModelOtherNetgenOpts" "" 
      "A" "" "" "" "PROP_SimModelRetainHierarchy" "true" 
      "A" "" "" "" "PROP_SimUseCustom_behav" "true" 
      "A" "" "" "" "PROP_SimUseCustom_postMap" "false" 
      "A" "" "" "" "PROP_SimUseCustom_postPar" "false" 
      "A" "" "" "" "PROP_SimUseCustom_postXlate" "false" 
      "A" "" "" "" "PROP_SynthCaseImplStyle" "Full" 
      "A" "" "" "" "PROP_SynthDecoderExtract" "true" 
      "A" "" "" "" "PROP_SynthEncoderExtract" "Yes" 
      "A" "" "" "" "PROP_SynthExtractMux" "Yes" 
      "A" "" "" "" "PROP_SynthExtractRAM" "true" 
      "A" "" "" "" "PROP_SynthExtractROM" "true" 
      "A" "" "" "" "PROP_SynthFsmEncode" "Auto" 
      "A" "" "" "" "PROP_SynthLogicalShifterExtract" "true" 
      "A" "" "" "" "PROP_SynthOpt" "Speed" 
      "A" "" "" "" "PROP_SynthOptEffort" "High" 
      "A" "" "" "" "PROP_SynthResSharing" "true" 
      "A" "" "" "" "PROP_SynthShiftRegExtract" "true" 
      "A" "" "" "" "PROP_SynthTop" "Module|topbox" 
      "A" "" "" "" "PROP_SynthXORCollapse" "true" 
      "A" "" "" "" "PROP_Top_Level_Module_Type" "HDL" 
      "A" "" "" "" "PROP_UseDataGate" "true" 
      "A" "" "" "" "PROP_UseSmartGuide" "false" 
      "A" "" "" "" "PROP_UserConstraintEditorPreference" "Constraints Editor" 
      "A" "" "" "" "PROP_UserEditorCustomSetting" "" 
      "A" "" "" "" "PROP_UserEditorPreference" "ISE Text Editor" 
      "A" "" "" "" "PROP_XPowerOptInputTclScript" "" 
      "A" "" "" "" "PROP_XPowerOptLoadPCFFile" "Default" 
      "A" "" "" "" "PROP_XPowerOptLoadVCDFile" "Default" 
      "A" "" "" "" "PROP_XPowerOptLoadXMLFile" "Default" 
      "A" "" "" "" "PROP_XPowerOptOutputFile" "Default" 
      "A" "" "" "" "PROP_XPowerOptVerboseRpt" "false" 
      "A" "" "" "" "PROP_XPowerOtherXPowerOpts" "" 
      "A" "" "" "" "PROP_XplorerMode" "Off" 
      "A" "" "" "" "PROP_bitgen_otherCmdLineOptions" "" 
      "A" "" "" "" "PROP_cpldBestFit" "false" 
      "A" "" "" "" "PROP_cpldfitHDLeqStyle" "Source" 
      "A" "" "" "" "PROP_cpldfit_otherCmdLineOptions" "" 
      "A" "" "" "" "PROP_fitGenSimModel" "false" 
      "A" "" "" "" "PROP_hprep6_autosig" "false" 
      "A" "" "" "" "PROP_hprep6_otherCmdLineOptions" "" 
      "A" "" "" "" "PROP_ibiswriterShowAllModels" "false" 
      "A" "" "" "" "PROP_lockPinsUcfFile" "" 
      "A" "" "" "" "PROP_mapIgnoreTimingConstraints" "false" 
      "A" "" "" "" "PROP_mapTimingAnalyzerLoadDesign" "true" 
      "A" "" "" "" "PROP_mapUseRLOCConstraints" "true" 
      "A" "" "" "" "PROP_map_otherCmdLineOptions" "" 
      "A" "" "" "" "PROP_mpprRsltToCopy" "" 
      "A" "" "" "" "PROP_mpprViewPadRptsForAllRslt" "true" 
      "A" "" "" "" "PROP_mpprViewParRptsForAllRslt" "true" 
      "A" "" "" "" "PROP_ngdbuildUseLOCConstraints" "true" 
      "A" "" "" "" "PROP_ngdbuild_otherCmdLineOptions" "" 
      "A" "" "" "" "PROP_parIgnoreTimingConstraints" "false" 
      "A" "" "" "" "PROP_parTimingAnalyzerLoadDesign" "true" 
      "A" "" "" "" "PROP_par_otherCmdLineOptions" "" 
      "A" "" "" "" "PROP_primeCorrelateOutput" "false" 
      "A" "" "" "" "PROP_primeFlatternOutputNetlist" "false" 
      "A" "" "" "" "PROP_primeTopLevelModule" "" 
      "A" "" "" "" "PROP_primetimeBlockRamData" "" 
      "A" "" "" "" "PROP_taengine_otherCmdLineOptions" "" 
      "A" "" "" "" "PROP_xcpldFitDesInit" "Low" 
      "A" "" "" "" "PROP_xcpldFitDesInputLmt_xbr" "32" 
      "A" "" "" "" "PROP_xcpldFitDesMultiLogicOpt" "true" 
      "A" "" "" "" "PROP_xcpldFitDesSlew" "Fast" 
      "A" "" "" "" "PROP_xcpldFitDesTimingCst" "true" 
      "A" "" "" "" "PROP_xcpldFitDesTriMode" "Keeper" 
      "A" "" "" "" "PROP_xcpldFitDesUnused" "Keeper" 
      "A" "" "" "" "PROP_xcpldFitDesVolt" "LVCMOS18" 
      "A" "" "" "" "PROP_xcpldFitTemplate_xpla3" "Optimize Density" 
      "A" "" "" "" "PROP_xcpldFittimRptOption" "Summary" 
      "A" "" "" "" "PROP_xcpldUseGlobalClocks" "true" 
      "A" "" "" "" "PROP_xcpldUseGlobalOutputEnables" "true" 
      "A" "" "" "" "PROP_xcpldUseGlobalSetReset" "true" 
      "A" "" "" "" "PROP_xcpldUseLocConst" "Always" 
      "A" "" "" "" "PROP_xilxBitgCfg_Clk" "Pull Up" 
      "A" "" "" "" "PROP_xilxBitgCfg_Code" "0xFFFFFFFF" 
      "A" "" "" "" "PROP_xilxBitgCfg_DCMShutdown" "false" 
      "A" "" "" "" "PROP_xilxBitgCfg_Done" "Pull Up" 
      "A" "" "" "" "PROP_xilxBitgCfg_GenOpt_ASCIIFile" "false" 
      "A" "" "" "" "PROP_xilxBitgCfg_GenOpt_BinaryFile" "false" 
      "A" "" "" "" "PROP_xilxBitgCfg_GenOpt_BitFile" "true" 
      "A" "" "" "" "PROP_xilxBitgCfg_GenOpt_Compress" "false" 
      "A" "" "" "" "PROP_xilxBitgCfg_GenOpt_DRC" "true" 
      "A" "" "" "" "PROP_xilxBitgCfg_GenOpt_EnableCRC" "true" 
      "A" "" "" "" "PROP_xilxBitgCfg_GenOpt_IEEE1532File" "false" 
      "A" "" "" "" "PROP_xilxBitgCfg_GenOpt_IEEE1532File_xbr" "false" 
      "A" "" "" "" "PROP_xilxBitgCfg_GenOpt_ReadBack" "false" 
      "A" "" "" "" "PROP_xilxBitgCfg_M0" "Pull Up" 
      "A" "" "" "" "PROP_xilxBitgCfg_M1" "Pull Up" 
      "A" "" "" "" "PROP_xilxBitgCfg_M2" "Pull Up" 
      "A" "" "" "" "PROP_xilxBitgCfg_Pgm" "Pull Up" 
      "A" "" "" "" "PROP_xilxBitgCfg_TCK" "Pull Up" 
      "A" "" "" "" "PROP_xilxBitgCfg_TDI" "Pull Up" 
      "A" "" "" "" "PROP_xilxBitgCfg_TDO" "Pull Up" 
      "A" "" "" "" "PROP_xilxBitgCfg_TMS" "Pull Up" 
      "A" "" "" "" "PROP_xilxBitgCfg_Unused" "Pull Down" 
      "A" "" "" "" "PROP_xilxBitgReadBk_Sec" "Enable Readback and Reconfiguration" 
      "A" "" "" "" "PROP_xilxBitgStart_Clk" "CCLK" 
      "A" "" "" "" "PROP_xilxBitgStart_Clk_Done" "6" 
      "A" "" "" "" "PROP_xilxBitgStart_Clk_DriveDone" "false" 
      "A" "" "" "" "PROP_xilxBitgStart_Clk_EnOut" "3" 
      "A" "" "" "" "PROP_xilxBitgStart_Clk_MatchCycle" "NoWait" 
      "A" "" "" "" "PROP_xilxBitgStart_Clk_RelDLL" "4" 
      "A" "" "" "" "PROP_xilxBitgStart_Clk_WrtEn" "5" 
      "A" "" "" "" "PROP_xilxBitgStart_IntDone" "false" 
      "A" "" "" "" "PROP_xilxMapAllowLogicOpt" "false" 
      "A" "" "" "" "PROP_xilxMapCoverMode" "Area" 
      "A" "" "" "" "PROP_xilxMapDisableRegOrdering" "false" 
      "A" "" "" "" "PROP_xilxMapPackRegInto" "Off" 
      "A" "" "" "" "PROP_xilxMapReplicateLogic" "true" 
      "A" "" "" "" "PROP_xilxMapReportDetail" "false" 
      "A" "" "" "" "PROP_xilxMapSliceLogicInUnusedBRAMs" "false" 
      "A" "" "" "" "PROP_xilxMapTimingDrivenPacking" "true" 
      "A" "" "" "" "PROP_xilxMapTrimUnconnSig" "true" 
      "A" "" "" "" "PROP_xilxNgdbldIOPads" "false" 
      "A" "" "" "" "PROP_xilxNgdbldMacro" "" 
      "A" "" "" "" "PROP_xilxNgdbldNTType" "Timestamp" 
      "A" "" "" "" "PROP_xilxNgdbldUR" "" 
      "A" "" "" "" "PROP_xilxNgdbldUnexpBlks" "false" 
      "A" "" "" "" "PROP_xilxNgdbld_AUL" "false" 
      "A" "" "" "" "PROP_xilxPARplacerCostTable" "1" 
      "A" "" "" "" "PROP_xilxPARplacerEffortLevel" "None" 
      "A" "" "" "" "PROP_xilxPARrouterEffortLevel" "None" 
      "A" "" "" "" "PROP_xilxPARstrat" "Normal Place and Route" 
      "A" "" "" "" "PROP_xilxPARuseBondedIO" "false" 
      "A" "" "" "" "PROP_xilxPostTrceAdvAna" "false" 
      "A" "" "" "" "PROP_xilxPostTrceEndpointPath" "" 
      "A" "" "" "" "PROP_xilxPostTrceRpt" "Verbose Report" 
      "A" "" "" "" "PROP_xilxPostTrceRptLimit" "3" 
      "A" "" "" "" "PROP_xilxPostTrceStamp" "" 
      "A" "" "" "" "PROP_xilxPostTrceTSIFile" "" 
      "A" "" "" "" "PROP_xilxPostTrceUncovPath" "" 
      "A" "" "" "" "PROP_xilxPreTrceAdvAna" "false" 
      "A" "" "" "" "PROP_xilxPreTrceEndpointPath" "" 
      "A" "" "" "" "PROP_xilxPreTrceRpt" "Verbose Report" 
      "A" "" "" "" "PROP_xilxPreTrceRptLimit" "3" 
      "A" "" "" "" "PROP_xilxPreTrceUncovPath" "" 
      "A" "" "" "" "PROP_xilxSynthAddIObuf" "true" 
      "A" "" "" "" "PROP_xilxSynthGlobOpt" "AllClockNets" 
      "A" "" "" "" "PROP_xilxSynthKeepHierarchy" "No" 
      "A" "" "" "" "PROP_xilxSynthKeepHierarchy_CPLD" "Yes" 
      "A" "" "" "" "PROP_xilxSynthMacroPreserve" "true" 
      "A" "" "" "" "PROP_xilxSynthRegBalancing" "Yes" 
      "A" "" "" "" "PROP_xilxSynthRegDuplication" "true" 
      "A" "" "" "" "PROP_xilxSynthXORPreserve" "true" 
      "A" "" "" "" "PROP_xstAsynToSync" "false" 
      "A" "" "" "" "PROP_xstAutoBRAMPacking" "false" 
      "A" "" "" "" "PROP_xstBRAMUtilRatio" "100" 
      "A" "" "" "" "PROP_xstBusDelimiter" "<>" 
      "A" "" "" "" "PROP_xstCase" "Maintain" 
      "A" "" "" "" "PROP_xstCoresSearchDir" "" 
      "A" "" "" "" "PROP_xstCrossClockAnalysis" "true" 
      "A" "" "" "" "PROP_xstEquivRegRemoval" "true" 
      "A" "" "" "" "PROP_xstFsmStyle" "LUT" 
      "A" "" "" "" "PROP_xstGenerateRTLNetlist" "Yes" 
      "A" "" "" "" "PROP_xstGenericsParameters" "" 
      "A" "" "" "" "PROP_xstHierarchySeparator" "/" 
      "A" "" "" "" "PROP_xstIniFile" "" 
      "A" "" "" "" "PROP_xstLibSearchOrder" "" 
      "A" "" "" "" "PROP_xstNetlistHierarchy" "As Optimized" 
      "A" "" "" "" "PROP_xstOptimizeInsPrimtives" "true" 
      "A" "" "" "" "PROP_xstPackIORegister" "Auto" 
      "A" "" "" "" "PROP_xstReadCores" "true" 
      "A" "" "" "" "PROP_xstSlicePacking" "true" 
      "A" "" "" "" "PROP_xstSliceUtilRatio" "100" 
      "A" "" "" "" "PROP_xstUseClockEnable" "Yes" 
      "A" "" "" "" "PROP_xstUseSyncReset" "Yes" 
      "A" "" "" "" "PROP_xstUseSyncSet" "Yes" 
      "A" "" "" "" "PROP_xstUseSynthConstFile" "true" 
      "A" "" "" "" "PROP_xstUserCompileList" "" 
      "A" "" "" "" "PROP_xstVeriIncludeDir_Global" "" 
      "A" "" "" "" "PROP_xstVerilog2001" "true" 
      "A" "" "" "" "PROP_xstVerilogMacros" "" 
      "A" "" "" "" "PROP_xstWorkDir" "./xst" 
      "A" "" "" "" "PROP_xstWriteTimingConstraints" "false" 
      "A" "" "" "" "PROP_xst_otherCmdLineOptions" "" 
      "B" "" "" "" "PROP_DevFamily" "Spartan3" 
      "B" "" "" "" "PROP_FitterOptimization_xpla3" "Density" 
      "B" "" "" "" "PROP_MapEffortLevel" "High" 
      "B" "" "" "" "PROP_MapLogicOptimization" "false" 
      "B" "" "" "" "PROP_MapPlacerCostTable" "1" 
      "B" "" "" "" "PROP_MapPowerReduction" "false" 
      "B" "" "" "" "PROP_MapRegDuplication" "false" 
      "B" "" "" "" "PROP_ModelSimConfigName" "Default" 
      "B" "" "" "" "PROP_ModelSimDataWin" "false" 
      "B" "" "" "" "PROP_ModelSimListWin" "false" 
      "B" "" "" "" "PROP_ModelSimProcWin" "false" 
      "B" "" "" "" "PROP_ModelSimSignalWin" "true" 
      "B" "" "" "" "PROP_ModelSimSimRes" "Default (1 ps)" 
      "B" "" "" "" "PROP_ModelSimSimRunTime_tb" "1000ns" 
      "B" "" "" "" "PROP_ModelSimSimRunTime_tbw" "" 
      "B" "" "" "" "PROP_ModelSimSourceWin" "false" 
      "B" "" "" "" "PROP_ModelSimStructWin" "true" 
      "B" "" "" "" "PROP_ModelSimUutInstName_postFit" "UUT" 
      "B" "" "" "" "PROP_ModelSimUutInstName_postMap" "UUT" 
      "B" "" "" "" "PROP_ModelSimUutInstName_postPar" "UUT" 
      "B" "" "" "" "PROP_ModelSimVarsWin" "false" 
      "B" "" "" "" "PROP_ModelSimWaveWin" "true" 
      "B" "" "" "" "PROP_SimCustom_behav" "control-wave.do" 
      "B" "" "" "" "PROP_SimCustom_postMap" "" 
      "B" "" "" "" "PROP_SimCustom_postPar" "" 
      "B" "" "" "" "PROP_SimCustom_postXlate" "" 
      "B" "" "" "" "PROP_SimGenVcdFile" "false" 
      "B" "" "" "" "PROP_SimModelRenTopLevInstTo" "UUT" 
      "B" "" "" "" "PROP_SimSyntax" "93" 
      "B" "" "" "" "PROP_SimUseExpDeclOnly" "true" 
      "B" "" "" "" "PROP_SimUserCompileList_behav" "" 
      "B" "" "" "" "PROP_Simulator" "Modelsim-XE Verilog" 
      "B" "" "" "" "PROP_SmartGuideFileName" "topbox_guide.ncd" 
      "B" "" "" "" "PROP_SynthConstraintsFile" "" 
      "B" "" "" "" "PROP_SynthMuxStyle" "Auto" 
      "B" "" "" "" "PROP_SynthRAMStyle" "Auto" 
      "B" "" "" "" "PROP_XPowerOptAdvancedVerboseRpt" "false" 
      "B" "" "" "" "PROP_XPowerOptMaxNumberLines" "1000" 
      "B" "" "" "" "PROP_XplorerEnableRetiming" "true" 
      "B" "" "" "" "PROP_XplorerNumIterations" "7" 
      "B" "" "" "" "PROP_XplorerOtherCmdLineOptions" "" 
      "B" "" "" "" "PROP_XplorerRunType" "Yes" 
      "B" "" "" "" "PROP_impactBaud" "Auto" 
      "B" "" "" "" "PROP_impactPort" "Auto - default" 
      "B" "" "" "" "PROP_mapTimingMode" "Non Timing Driven" 
      "B" "" "" "" "PROP_mpprViewPadRptForSelRslt" "" 
      "B" "" "" "" "PROP_mpprViewParRptForSelRslt" "" 
      "B" "" "" "" "PROP_parGenAsyDlyRpt" "false" 
      "B" "" "" "" "PROP_parGenClkRegionRpt" "false" 
      "B" "" "" "" "PROP_parGenSimModel" "false" 
      "B" "" "" "" "PROP_parGenTimingRpt" "true" 
      "B" "" "" "" "PROP_parMpprNodelistFile" "" 
      "B" "" "" "" "PROP_parMpprParIterations" "3" 
      "B" "" "" "" "PROP_parMpprResultsDirectory" "" 
      "B" "" "" "" "PROP_parMpprResultsToSave" "" 
      "B" "" "" "" "PROP_parPowerReduction" "false" 
      "B" "" "" "" "PROP_parTimingMode" "Performance Evaluation" 
      "B" "" "" "" "PROP_vcom_otherCmdLineOptions" "" 
      "B" "" "" "" "PROP_vlog_otherCmdLineOptions" "" 
      "B" "" "" "" "PROP_vsim_otherCmdLineOptions" "" 
      "B" "" "" "" "PROP_xcpldFitDesInReg_xbr" "true" 
      "B" "" "" "" "PROP_xcpldFitDesPtermLmt_xbr" "28" 
      "B" "" "" "" "PROP_xilxBitgCfg_GenOpt_DbgBitStr" "false" 
      "B" "" "" "" "PROP_xilxBitgCfg_GenOpt_LogicAllocFile" "false" 
      "B" "" "" "" "PROP_xilxBitgCfg_GenOpt_MaskFile" "false" 
      "B" "" "" "" "PROP_xilxBitgReadBk_GenBitStr" "false" 
      "B" "" "" "" "PROP_xilxMapPackfactor" "100" 
      "B" "" "" "" "PROP_xilxPAReffortLevel" "High" 
      "B" "" "" "" "PROP_xstMoveFirstFfStage" "true" 
      "B" "" "" "" "PROP_xstMoveLastFfStage" "true" 
      "B" "" "" "" "PROP_xstROMStyle" "Auto" 
      "B" "" "" "" "PROP_xstSafeImplement" "Yes" 
      "C" "" "" "" "PROP_CompxlibLang" "Verilog" 
      "C" "" "" "" "PROP_CompxlibSimPath" "/usr/local/gnuarm-4.0.2/bin" 
      "C" "" "" "" "PROP_DevDevice" "xc3s200" 
      "C" "" "" "" "PROP_DevFamilyPMName" "spartan3" 
      "C" "" "" "" "PROP_MapExtraEffort" "Normal" 
      "C" "" "" "" "PROP_MapPowerActivityFile" "" 
      "C" "" "" "" "PROP_SimModelGenMultiHierFile" "false" 
      "C" "" "" "" "PROP_parPowerActivityFile" "" 
      "C" "" "" "" "PROP_xilxPARextraEffortLevel" "Normal" 
      "D" "" "" "" "PROP_CompxlibUni9000Lib" "true" 
      "D" "" "" "" "PROP_CompxlibUniSimLib" "true" 
      "D" "" "" "" "PROP_DevPackage" "ft256" 
      "D" "" "" "" "PROP_Synthesis_Tool" "XST (VHDL/Verilog)" 
      "E" "" "" "" "PROP_DevSpeed" "-4" 
      "E" "" "" "" "PROP_PreferredLanguage" "Verilog" 
      "F" "" "" "" "PROP_ChangeDevSpeed" "-4" 
      "F" "" "" "" "PROP_SimModelTarget" "Verilog" 
      "F" "" "" "" "PROP_coregenFuncModelTargetLang" "Verilog" 
      "F" "" "" "" "PROP_hdlInstTempTargetLang" "Verilog" 
      "F" "" "" "" "PROP_schFuncModelTargetLang" "Verilog" 
      "F" "" "" "" "PROP_schInstTempTargetLang" "Verilog" 
      "F" "" "" "" "PROP_tbwTestbenchTargetLang" "Verilog" 
      "F" "" "" "" "PROP_xawHdlSourceTargetLang" "Verilog" 
      "F" "" "" "" "PROP_xawInstTempTargetLang" "Verilog" 
      "F" "" "" "" "PROP_xilxPostTrceSpeed" "-4" 
      "F" "" "" "" "PROP_xilxPreTrceSpeed" "-4" 
      "F" "" "" "" "PROP_xmpInstTempTargetLang" "Verilog" 
      "G" "" "" "" "PROP_SimModelAutoInsertGlblModuleInNetlist" "true" 
      "G" "" "" "" "PROP_SimModelGenArchOnly" "false" 
      "G" "" "" "" "PROP_SimModelIncSdfAnnInVerilogFile" "true" 
      "G" "" "" "" "PROP_SimModelIncSimprimInVerilogFile" "false" 
      "G" "" "" "" "PROP_SimModelIncUnisimInVerilogFile" "false" 
      "G" "" "" "" "PROP_SimModelIncUselibDirInVerilogFile" "false" 
      "G" "" "" "" "PROP_SimModelNoEscapeSignal" "false" 
      "G" "" "" "" "PROP_SimModelOutputExtIdent" "false" 
      "G" "" "" "" "PROP_SimModelRenTopLevArchTo" "Structure" 
      "G" "" "" "" "PROP_SimModelRenTopLevMod" "" 
      "G" "" "" "" "PROP_bencherPostMapTestbenchName" "tbuart.map_tfw" 
      "G" "" "" "" "PROP_bencherPostParTestbenchName" "tbuart.timesim_tfw" 
      "G" "" "" "" "PROP_bencherPostXlateTestbenchName" "tbuart.translate_tfw" 
      "G" "" "" "" "PROP_netgenPostMapSimModelName" "topbox_map.v" 
      "G" "" "" "" "PROP_netgenPostParSimModelName" "topbox_timesim.v" 
      "G" "" "" "" "PROP_netgenPostSynthesisSimModelName" "topbox_synthesis.v" 
      "G" "" "" "" "PROP_netgenPostXlateSimModelName" "topbox_translate.v" 
      "H" "" "" "" "PROP_SimModelBringOutGsrNetAsAPort" "false" 
      "H" "" "" "" "PROP_SimModelBringOutGtsNetAsAPort" "false" 
      "H" "" "" "" "PROP_SimModelPathUsedInSdfAnn" "Default" 
      "H" "" "" "" "PROP_netgenRenameTopLevEntTo" "" 
      "I" "" "" "" "PROP_SimModelGsrPortName" "GSR_PORT" 
      "I" "" "" "" "PROP_SimModelGtsPortName" "GTS_PORT" 
      "I" "" "" "" "PROP_SimModelRocPulseWidth" "100" 
      "I" "" "" "" "PROP_SimModelTocPulseWidth" "0"}

  HandleException {
    RestoreProcessProperties $iProjHelper $process_props
  } "A problem occured while restoring process properties."

   # library names and their members
   set libraries {
   }

  HandleException {
    RestoreSourceLibraries $iProjHelper $libraries
  } "A problem occured while restoring source libraries."

   # partition names for recreation
   set partition_names {
   }

  HandleException {
    RestorePartitions $partition_names
  } "A problem occured while restoring partitions."

   # Close the facilitator project.
   CloseFacilProject $iProjHelper

   # cd into the project directory before trying to open thr project
   cd $project_dir

   set proj_file_full_path [file join $project_dir $project_file]
   INFO "Opening restored project file \"$proj_file_full_path\" ..."

   # Open the restored project in the user's client application,
   # which will either be the Projnav GUI or xtclsh.
   project open $project_file

   # Let the user know about the backed up project file.
   INFO "The project \"$project_file\" was successfully recovered and opened."
   if {$wasBackedUp} {
      INFO ""
      INFO "The original project was renamed as \"$backup_file\"."
      INFO "Please open a Technical Support WebCase at"
      INFO "www.xilinx.com/support/clearexpress/websupport.htm"
      INFO "and submit this file, along with the project source files, for evaluation."
   }
}

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.