OpenCores
URL https://opencores.org/ocsvn/bluespec-h264/bluespec-h264/trunk

Subversion Repositories bluespec-h264

[/] [bluespec-h264/] [trunk/] [src/] [mkFinalOutput.bsv] - Rev 9

Go to most recent revision | Compare with Previous | Blame | View Log

//**********************************************************************
// final output implementation
//----------------------------------------------------------------------
//
//

package mkFinalOutput;

import H264Types::*;
import IFinalOutput::*;
import FIFO::*;
import RegFile::*;

import Connectable::*;
import GetPut::*;

`define INPUT_SIZE 17740800

//-----------------------------------------------------------
// Final Output Module
//-----------------------------------------------------------

module mkFinalOutput( IFinalOutput );

   FIFO#(BufferControlOT)  infifo    <- mkFIFO;
   RegFile#(Bit#(27), Bit#(8)) rfile <- mkRegFileLoad("golden.hex", 0, `INPUT_SIZE);
   
   Reg#(Bit#(27))    index   <- mkReg(0);

   Reg#(Bit#(32)) tick_counter <- mkReg(0);
   Reg#(Bit#(32)) data_seen_counter <- mkReg(0); 
   Reg#(Bit#(32)) last_f_count <- mkReg(0);
   Reg#(Bit#(32)) f_count <- mkReg(0);

   rule tick;
     tick_counter <= tick_counter + 1;
     if(tick_counter%2000000 == 0)
       begin
         if(last_f_count == f_count)
           begin
             $display("mkFinalOutput: Warning: no new frames, stuck at %d", last_f_count); 
           end
         else
           begin
             $display("mkFinalOutput: Feelin' fine current frames: %d", last_f_count); 
           end
         last_f_count <= f_count;
       end
   endrule

   //-----------------------------------------------------------
   // Rules
   rule finalout (True); 
      Bit#(32) data_constant = pack(fromInteger(horizontal_pixels * vertical_pixels))*3/2;
      if(data_seen_counter + 4 > data_constant)
        begin
          f_count <= f_count + 1;
          data_seen_counter <= 0; 
        end 
      else
        begin
          data_seen_counter <= data_seen_counter+4;
        end

      index <= index + 4;
      if(infifo.first() matches tagged YUV .xdata)
         begin
            $display("OUT %h", xdata[31:24]);
            $display("OUT %h", xdata[23:16]);
            $display("OUT %h", xdata[15:8]);
            $display("OUT %h", xdata[7:0]);
            if( xdata[7:0] != rfile.sub(index))
              begin
                $display("mkFinalOutput: ccl5finalout ERROR %h, index %d", xdata[7:0], index);
              end
            if( xdata[15:8] != rfile.sub(index + 1))
              begin
                $display("mkFinalOutput: ccl5finalout ERROR %h, index %d", xdata[15:8], index + 1);
              end
            if( xdata[23:16] != rfile.sub(index+2))
              begin
                $display("mkFinalOutput: ccl5finalout ERROR %h, index %d", xdata[23:16], index+2);
              end
            if( xdata[31:24] != rfile.sub(index+3))
              begin
                $display("mkFinalOutput: ccl5finalout ERROR %h, index %d", xdata[31:24], index+3);
              end
            infifo.deq();
         end
      else
         $finish(0);
   endrule


   interface Put ioin  = fifoToPut(infifo);

endmodule

endpackage

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.