OpenCores
URL https://opencores.org/ocsvn/bu_pacman/bu_pacman/trunk

Subversion Repositories bu_pacman

[/] [bu_pacman/] [tags/] [arelease/] [fifo_generator_v4_3.xco] - Rev 6

Compare with Previous | Blame | View Log

##############################################################
#
# Xilinx Core Generator version K.31
# Date: Sun Nov 23 22:14:23 2008
#
##############################################################
#
#  This file contains the customisation parameters for a
#  Xilinx CORE Generator IP GUI. It is strongly recommended
#  that you do not manually alter this file as it may cause
#  unexpected and unsupported behavior.
#
##############################################################
#
# BEGIN Project Options
SET addpads = False
SET asysymbol = False
SET busformat = BusFormatAngleBracketNotRipped
SET createndf = False
SET designentry = Verilog
SET device = xc3s1000
SET devicefamily = spartan3
SET flowvendor = Other
SET formalverification = False
SET foundationsym = False
SET implementationfiletype = Ngc
SET package = ft256
SET removerpms = False
SET simulationfiles = Behavioral
SET speedgrade = -4
SET verilogsim = True
SET vhdlsim = False
# END Project Options
# BEGIN Select
SELECT Fifo_Generator family Xilinx,_Inc. 4.3
# END Select
# BEGIN Parameters
CSET almost_empty_flag=false
CSET almost_full_flag=false
CSET component_name=fifo_generator_v4_3
CSET data_count=false
CSET data_count_width=14
CSET disable_timing_violations=false
CSET dout_reset_value=0
CSET empty_threshold_assert_value=2
CSET empty_threshold_negate_value=3
CSET enable_ecc=false
CSET enable_int_clk=false
CSET fifo_implementation=Independent_Clocks_Block_RAM
CSET full_flags_reset_value=1
CSET full_threshold_assert_value=16381
CSET full_threshold_negate_value=16380
CSET input_data_width=16
CSET input_depth=16384
CSET output_data_width=16
CSET output_depth=16384
CSET overflow_flag=false
CSET overflow_sense=Active_High
CSET performance_options=Standard_FIFO
CSET programmable_empty_type=No_Programmable_Empty_Threshold
CSET programmable_full_type=No_Programmable_Full_Threshold
CSET read_clock_frequency=1
CSET read_data_count=false
CSET read_data_count_width=14
CSET reset_pin=true
CSET reset_type=Asynchronous_Reset
CSET underflow_flag=false
CSET underflow_sense=Active_High
CSET use_dout_reset=true
CSET use_embedded_registers=false
CSET use_extra_logic=false
CSET valid_flag=false
CSET valid_sense=Active_High
CSET write_acknowledge_flag=false
CSET write_acknowledge_sense=Active_High
CSET write_clock_frequency=1
CSET write_data_count=false
CSET write_data_count_width=14
# END Parameters
GENERATE
# CRC: 84d13f90

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.