URL
https://opencores.org/ocsvn/c0or1k/c0or1k/trunk
Subversion Repositories c0or1k
[/] [c0or1k/] [trunk/] [config/] [configuration.py] - Rev 3
Go to most recent revision | Compare with Previous | Blame | View Log
#! /usr/bin/env python2.6 # -*- mode: python; coding: utf-8; -*- import os, sys, shelve, shutil, re from projpaths import * from lib import * from caps import * class Container: def __init__(self, id): self.dirname = None self.name = None self.type = None self.id = id self.pager_lma = 0 self.pager_vma = 0 self.pager_size = 0 self.pager_rw_section_start = 0 self.pager_rw_section_end = 0 self.pager_rx_section_start = 0 self.pager_rx_section_end = 0 self.pager_task_region_start = 0 self.pager_task_region_end = 0 self.pager_shm_region_start = 0 self.pager_shm_region_end = 0 self.pager_utcb_region_start = 0 self.pager_utcb_region_end = 0 self.linux_zreladdr = 0 self.linux_page_offset = 0 self.linux_phys_offset = 0 self.linux_rootfs_address = 0 self.physmem = {} self.physmem["START"] = {} self.physmem["END"] = {} self.virtmem = {} self.virtmem["START"] = {} self.virtmem["END"] = {} self.caps = {} self.virt_regions = 0 self.phys_regions = 0 def print_self(self): print '\nContainer %d' % self.id print 'Container type: %s' % self.type print 'Container Name: %s' % self.name print 'Container Pager lma: %s' % conv_hex(self.pager_lma) print 'Container Pager vma: %s' % conv_hex(self.pager_vma) print 'Container Pager shm region start: %s' % conv_hex(self.pager_shm_region_start) print 'Container Pager shm region end: %s' % conv_hex(self.pager_shm_region_end) print 'Container Pager task region start: %s' % conv_hex(self.pager_task_region_start) print 'Container Pager task region end: %s' % conv_hex(self.pager_task_region_end) print 'Container Pager utcb region start: %s' % conv_hex(self.pager_utcb_region_start) print 'Container Pager utcb region end: %s' % conv_hex(self.pager_utcb_region_end) print 'Container Virtual regions: %s' % self.virt_regions print 'Container Physical regions: %s' % self.phys_regions print 'Container Capabilities: %s' % self.caps print '\n' class configuration: def __init__(self): # Mapping between cpu and gcc flags for it. # Optimized solution to derive gcc arch flag from cpu # gcc flag here is "-march" # cpu -march flag self.arch_to_gcc_flag = (['ARM926', 'armv5'], ['ARM1136', 'armv6'], ['ARM11MPCORE', 'armv6k'], ['CORTEXA8', 'armv7-a'], ['CORTEXA9', 'armv7-a']) self.arch = None self.subarch = None self.platform = None self.cpu = None self.gcc_arch_flag = None self.toolchain_userspace = None self.toolchain_kernel = None self.all = [] self.smp = False self.ncpu = 0 self.containers = [] self.ncontainers = 0 # Get all name value symbols def get_all(self, name, val): self.all.append([name, val]) # Convert line to name value pair, if possible def line_to_name_value(self, line): parts = line.split() if len(parts) > 0: if parts[0] == "#define": return parts[1], parts[2] return None # Check if SMP enable, and get NCPU if SMP def get_ncpu(self, name, value): if name[:len("CONFIG_SMP")] == "CONFIG_SMP": self.smp = bool(value) if name[:len("CONFIG_NCPU")] == "CONFIG_NCPU": self.ncpu = int(value) # Extract architecture from a name value pair def get_arch(self, name, val): if name[:len("CONFIG_ARCH_")] == "CONFIG_ARCH_": parts = name.split("_", 3) self.arch = parts[2].lower() # Extract subarch from a name value pair def get_subarch(self, name, val): if name[:len("CONFIG_SUBARCH_")] == "CONFIG_SUBARCH_": parts = name.split("_", 3) self.subarch = parts[2].lower() # Extract platform from a name value pair def get_platform(self, name, val): if name[:len("CONFIG_PLATFORM_")] == "CONFIG_PLATFORM_": parts = name.split("_", 3) self.platform = parts[2].lower() # Extract cpu from a name value pair def get_cpu(self, name, val): if name[:len("CONFIG_CPU_")] == "CONFIG_CPU_": parts = name.split("_", 3) self.cpu = parts[2].lower() # derive gcc "-march" flag for cputype, archflag in self.arch_to_gcc_flag: if cputype == parts[2]: self.gcc_arch_flag = archflag # Extract kernel space toolchain from a name value pair def get_toolchain(self, name, val): if name[:len("CONFIG_TOOLCHAIN_USERSPACE")] == \ "CONFIG_TOOLCHAIN_USERSPACE": parts = val.split("\"", 2) self.toolchain_userspace = parts[1] if name[:len("CONFIG_TOOLCHAIN_KERNEL")] == \ "CONFIG_TOOLCHAIN_KERNEL": parts = val.split("\"", 2) self.toolchain_kernel = parts[1] # Extract number of containers def get_ncontainers(self, name, val): if name[:len("CONFIG_CONTAINERS")] == "CONFIG_CONTAINERS": self.ncontainers = int(val) # TODO: Carry this over to Container() as static method??? def get_container_parameter(self, id, param, val): if param[:len("PAGER_LMA")] == "PAGER_LMA": self.containers[id].pager_lma = int(val, 0) elif param[:len("PAGER_VMA")] == "PAGER_VMA": self.containers[id].pager_vma = int(val, 0) elif param[:len("PAGER_UTCB_START")] == "PAGER_UTCB_START": self.containers[id].pager_utcb_region_start = int(val, 0) elif param[:len("PAGER_UTCB_END")] == "PAGER_UTCB_END": self.containers[id].pager_utcb_region_end = int(val, 0) elif param[:len("PAGER_SHM_START")] == "PAGER_SHM_START": self.containers[id].pager_shm_region_start = int(val, 0) elif param[:len("PAGER_SHM_END")] == "PAGER_SHM_END": self.containers[id].pager_shm_region_end = int(val, 0) elif param[:len("PAGER_TASK_START")] == "PAGER_TASK_START": self.containers[id].pager_task_region_start = int(val, 0) elif param[:len("PAGER_TASK_END")] == "PAGER_TASK_END": self.containers[id].pager_task_region_end = int(val, 0) elif param[:len("LINUX_PAGE_OFFSET")] == "LINUX_PAGE_OFFSET": self.containers[id].linux_page_offset = int(val, 0) self.containers[id].pager_vma += int(val, 0) elif param[:len("LINUX_PHYS_OFFSET")] == "LINUX_PHYS_OFFSET": self.containers[id].linux_phys_offset = int(val, 0) self.containers[id].pager_lma += int(val, 0) elif param[:len("LINUX_ZRELADDR")] == "LINUX_ZRELADDR": self.containers[id].linux_zreladdr = int(val, 0) elif param[:len("LINUX_ROOTFS_ADDRESS")] == "LINUX_ROOTFS_ADDRESS": self.containers[id].linux_rootfs_address += int(val, 0) elif re.match(r"(VIRT|PHYS){1}([0-9]){1}(_){1}(START|END){1}", param): matchobj = re.match(r"(VIRT|PHYS){1}([0-9]){1}(_){1}(START|END){1}", param) virtphys, regionidstr, discard1, startend = matchobj.groups() regionid = int(regionidstr) if virtphys == "VIRT": self.containers[id].virtmem[startend][regionid] = val if regionid + 1 > self.containers[id].virt_regions: self.containers[id].virt_regions = regionid + 1 if virtphys == "PHYS": self.containers[id].physmem[startend][regionid] = val if regionid + 1 > self.containers[id].phys_regions: self.containers[id].phys_regions = regionid + 1 elif param[:len("OPT_NAME")] == "OPT_NAME": name = val[1:-1].lower() self.containers[id].name = name elif param[:len("BAREMETAL_PROJ_")] == "BAREMETAL_PROJ_": param1 = param.split("_", 2) self.containers[id].dirname = param1[2].lower() elif param[:len("CAP_")] == "CAP_": prefix, param_rest = param.split('_', 1) prepare_capability(self.containers[id], param_rest, val) else: param1, param2 = param.split("_", 1) if param1 == "TYPE": if param2 == "LINUX": self.containers[id].type = "linux" elif param2 == "POSIX": self.containers[id].type = "posix" elif param2 == "BAREMETAL": self.containers[id].type = "baremetal" # Extract parameters for containers def get_container_parameters(self, name, val): matchobj = re.match(r"(CONFIG_CONT){1}([0-9]){1}(\w+)", name) if not matchobj: return None prefix, idstr, param = matchobj.groups() id = int(idstr) # Create and add new container if this id was not seen self.check_add_container(id) # Get rid of '_' in front param = param[1:] # Check and store info on this parameter self.get_container_parameter(id, param, val) #self.containers_print(self.containers) # Used for sorting container members, # with this we are sure containers are sorted by id value @staticmethod def compare_containers(cont, cont2): if cont.id < cont2.id: return -1 if cont.id == cont2.id: print "compare_containers: Error, containers have same id." exit(1) if cont.id > cont2.id: return 1 def check_add_container(self, id): for cont in self.containers: if id == cont.id: return # If symbol to describe number of containers # Has already been visited, use that number # as an extra checking. if self.ncontainers > 0: # Sometimes unwanted symbols slip through if id >= self.ncontainers: return container = Container(id) self.containers.append(container) # Make sure elements in order for indexed accessing self.containers.sort(self.compare_containers) def config_print(self): print 'Configuration\n' print '-------------\n' print 'Arch: %s, %s' % (self.arch, self.subarch) print 'Platform: %s' % self.platform print 'Symbols:\n %s' % self.all print 'Containers: %d' % self.ncontainers self.containers_print() def containers_print(self): for c in self.containers: c.print_self() def configuration_save(config): if not os.path.exists(CONFIG_SHELVE_DIR): os.mkdir(CONFIG_SHELVE_DIR) config_shelve = shelve.open(CONFIG_SHELVE) config_shelve["configuration"] = config config_shelve["arch"] = config.arch config_shelve["subarch"] = config.subarch config_shelve["platform"] = config.platform config_shelve["cpu"] = config.cpu config_shelve["all_symbols"] = config.all config_shelve.close() def configuration_retrieve(): # Get configuration information config_shelve = shelve.open(CONFIG_SHELVE) config = config_shelve["configuration"] return config
Go to most recent revision | Compare with Previous | Blame | View Log