URL
https://opencores.org/ocsvn/copyblaze/copyblaze/trunk
Subversion Repositories copyblaze
[/] [copyblaze/] [trunk/] [copyblaze/] [rtl/] [vhdl/] [cpu/] [cp_ProgramFlowControl.vhd] - Rev 59
Go to most recent revision | Compare with Previous | Blame | View Log
-------------------------------------------------------------------------------- -- Company: -- -- File: cp_ProgramFlowControl.vhd -- -- Description: -- projet copyblaze -- Program Flow Control management -- -- File history: -- v1.0: 10/10/11: Creation -- v1.1: 11/10/11: Add Condionnal management -- v1.2: 12/10/11: Modification du traitement des conditions de saut -- -- Targeted device: ProAsic A3P250 VQFP100 -- Author: AbdAllah Meziti -------------------------------------------------------------------------------- library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; use work.Usefull_Pkg.all; -- Usefull Package -------------------------------------------------------------------------------- -- Entity: cp_ProgramFlowControl -- -- Description: -- -- REMARQUE: -- -- -- History: -- 10/10/11 AM: Creation -- --------------------- -- xx/xx/xx AM: -- -------------------------------------------------------------------------------- entity cp_ProgramFlowControl is generic ( GEN_WIDTH_PC : positive := 8; GEN_INT_VECTOR : std_ulogic_vector(11 downto 0) := x"0F0"; GEN_DEPTH_STACK : positive := 15 ); port ( -------------------------------------------------------------------------------- -- Signaux Systeme -------------------------------------------------------------------------------- Clk_i : in std_ulogic; -- signal d'horloge générale Rst_i_n : in std_ulogic; -- signal de reset générale Enable_i : in std_ulogic; -------------------------------------------------------------------------------- -- Signaux Fonctionels -------------------------------------------------------------------------------- aaa_i : in std_ulogic_vector(GEN_WIDTH_PC-1 downto 0); -- Interrupt_i : in std_ulogic; -- Jump_i : in std_ulogic; Call_i : in std_ulogic; Return_i : in std_ulogic; ReturnI_i : in std_ulogic; ConditionCtrl_i : in std_ulogic_vector(2 downto 0); FlagC_i : in std_ulogic; FlagZ_i : in std_ulogic; PC_o : out std_ulogic_vector(GEN_WIDTH_PC-1 downto 0) -- ); end cp_ProgramFlowControl; -------------------------------------------------------------------------------- -- Architecture: RTL -- of entity : cp_ProgramFlowControl -------------------------------------------------------------------------------- architecture rtl of cp_ProgramFlowControl is -------------------------------------------------------------------------------- -- Définition des fonctions -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Définition des constantes -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Définition des signaux interne -------------------------------------------------------------------------------- signal iPC : std_ulogic_vector(GEN_WIDTH_PC-1 downto 0); -- Programm Counter Signal signal iPCin : std_ulogic_vector(GEN_WIDTH_PC-1 downto 0); -- Programm Counter Signal signal iDataStackToPC : std_ulogic_vector(GEN_WIDTH_PC-1 downto 0); signal iChangePC : std_ulogic; alias iUnConditionnal : std_ulogic is ConditionCtrl_i(2); alias iConditionnal : std_ulogic_vector(1 downto 0) is ConditionCtrl_i(1 downto 0); signal iCondition : std_ulogic; signal iPush : std_ulogic; signal iPop : std_ulogic; -------------------------------------------------------------------------------- -- Déclaration des composants -------------------------------------------------------------------------------- component cp_ProgramCounter generic ( GEN_WIDTH_PC : positive := 8 ); port ( -------------------------------------------------------------------------------- -- Signaux Systeme -------------------------------------------------------------------------------- Clk_i : in std_ulogic; -- signal d'horloge générale Rst_i_n : in std_ulogic; -- signal de reset générale Enable_i : in std_ulogic; -------------------------------------------------------------------------------- -- Signaux Fonctionels -------------------------------------------------------------------------------- PC_i : in std_ulogic_vector(GEN_WIDTH_PC-1 downto 0); Change_i : in std_ulogic; PC_o : out std_ulogic_vector(GEN_WIDTH_PC-1 downto 0) ); end component; component cp_Stack generic ( GEN_WIDTH_PC : positive := 8; GEN_DETPH : positive := 15 ); port ( -------------------------------------------------------------------------------- -- Signaux Systeme -------------------------------------------------------------------------------- Clk_i : in std_ulogic; -- signal d'horloge générale Rst_i_n : in std_ulogic; -- signal de reset générale -------------------------------------------------------------------------------- -- Signaux Fonctionels -------------------------------------------------------------------------------- Data_i : in std_ulogic_vector(GEN_WIDTH_PC-1 downto 0); -- Data_o : out std_ulogic_vector(GEN_WIDTH_PC-1 downto 0); -- Enable_i : in std_ulogic; Push_i : in std_ulogic; Pop_i : in std_ulogic ); end component; begin -------------------------------------------------------------------------------- -- Traitement des conditions du saut du PC -------------------------------------------------------------------------------- iCondition <= '1' when (iUnConditionnal='0') else FlagZ_i when (iConditionnal="00") else not(FlagZ_i) when (iConditionnal="01") else FlagC_i when (iConditionnal="10") else not(FlagC_i) when (iConditionnal="11") else '0'; -- Commande d'écriture de la nouvelle valeur du PC iChangePC <= ((Jump_i or Call_i or Return_i) and (iCondition)) or (Interrupt_i) or (ReturnI_i); -- Nouvelle valeur du PC iPCin <= -- !TODO : Who has the priority, Jump or Interrupt? (GEN_INT_VECTOR(GEN_WIDTH_PC-1 downto 0)) when (Interrupt_i='1') else (iDataStackToPC) when (ReturnI_i='1') else (std_ulogic_vector(UNSIGNED(iDataStackToPC) + 1)) when (Return_i='1') else (aaa_i); -------------------------------------------------------------------------------- -- Traitement des commande de Push & Pop de la stack -------------------------------------------------------------------------------- iPush <= (iCondition and Call_i) or (Interrupt_i); iPop <= (iCondition and Return_i) or (ReturnI_i); -------------------------------------------------------------------------------- -- Instantiation du composant "cp_ProgramCounter" -------------------------------------------------------------------------------- U_ProgramCounter : cp_ProgramCounter generic map ( GEN_WIDTH_PC => GEN_WIDTH_PC ) port map( -------------------------------------------------------------------------------- -- Signaux Systeme -------------------------------------------------------------------------------- Clk_i => Clk_i, Rst_i_n => Rst_i_n, Enable_i => Enable_i, -------------------------------------------------------------------------------- -- Signaux Fonctionels -------------------------------------------------------------------------------- PC_i => iPCin, Change_i => iChangePC, PC_o => iPC ); -------------------------------------------------------------------------------- -- Instantiation du composant "cp_Stack" -------------------------------------------------------------------------------- U_Stack : cp_Stack generic map ( GEN_WIDTH_PC => GEN_WIDTH_PC, GEN_DETPH => GEN_DEPTH_STACK ) port map( -------------------------------------------------------------------------------- -- Signaux Systeme -------------------------------------------------------------------------------- Clk_i => Clk_i, Rst_i_n => Rst_i_n, -------------------------------------------------------------------------------- -- Signaux Fonctionels -------------------------------------------------------------------------------- Data_i => iPC, Data_o => iDataStackToPC, Enable_i => Enable_i, Push_i => iPush, Pop_i => iPop ); -------------------------------------------------------------------------------- -- Sorties -------------------------------------------------------------------------------- PC_o <= iPC; end rtl;
Go to most recent revision | Compare with Previous | Blame | View Log