Subversion Repositories cpu8080

#:C19    
#Xilinx FPGA Editor Command Log File
#Editor Version:
#:V   NT M2.1 I.33
#Current Working Directory:
#:D   C:\Xilinx\ISEexamples\cpu8080
#Date/Time:
#:T   Sat Oct 28 20:56:02 2006
#------------------------------
        #Reading testbench.ncd...
        #Loading device for application Rf_Device from file '3s1000.nph' in environment C:\Xilinx;C:\Xilinx.
        #   "testbench" is an NCD, version 3.1, device xc3s1000, package ft256, speed -4
        #Building chip graphics...
        #Loading speed info...
        #1
setattr main edit-mode no-logic-changes
        #2
unselect -all
        #3
unselect -all
        #4
select comp 'adm3a/display/N1709'
        #comp "adm3a/display/N1709",  site "SLICE_X36Y49",  type = SLICEM  (RPM grid X57Y101)
        #5
unselect -all
        #6
unselect -all
        #7
select wire 'INPUT(-3856,824)'
        #node = INPUT(-3856,824)
        #8
unselect -all
        #9
select wire 'OUTPUT(-3856,856)'
        #node = OUTPUT(-3856,856)
        #10
unselect -all
        #11
select wire 'OUTPUT(-3856,680)'
        #node = OUTPUT(-3856,680)
        #12
unselect wire 'OUTPUT(-3856,680)'
        #13
select -k comp 'N31'
        #14
unselect -all
        #15
select net 'adm3a/display/N1709'
        #net "adm3a/display/N1709"
        #16
unselect -all
        #17
select wire 'OUTPUT(-4016,864)'
        #node = OUTPUT(-4016,864)
        #18
unselect -all
        #19
select wire 'OUTPUT(-4016,872)'
        #node = OUTPUT(-4016,872)
        #20
unselect -all
        #21
select comp 'adm3a/display/N1709'
        #comp "adm3a/display/N1709",  site "SLICE_X36Y49",  type = SLICEM  (RPM grid X57Y101)
        #22
unselect -all
        #23
select comp 'adm3a/display/N1709'
        #comp "adm3a/display/N1709",  site "SLICE_X36Y49",  type = SLICEM  (RPM grid X57Y101)
        #24
unselect -all
        #25
select comp 'adm3a/display/N1709'
        #comp "adm3a/display/N1709",  site "SLICE_X36Y49",  type = SLICEM  (RPM grid X57Y101)
        #26
post block