URL
https://opencores.org/ocsvn/cpu_lecture/cpu_lecture/trunk
Subversion Repositories cpu_lecture
[/] [cpu_lecture/] [trunk/] [html/] [17_Listing_of_io.vhd.html] - Rev 11
Go to most recent revision | Compare with Previous | Blame | View Log
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <HTML> <HEAD> <TITLE>html/Listing_of_io.vhd</TITLE> <META NAME="generator" CONTENT="HTML::TextToHTML v2.46"> <LINK REL="stylesheet" TYPE="text/css" HREF="lecture.css"> </HEAD> <BODY> <P><table class="ttop"><th class="tpre"><a href="16_Listing_of_data_path.vhd.html">Previous Lesson</a></th><th class="ttop"><a href="toc.html">Table of Content</a></th><th class="tnxt"><a href="18_Listing_of_opc_deco.vhd.html">Next Lesson</a></th></table> <hr> <H1><A NAME="section_1">17 LISTING OF io.vhd</A></H1> <pre class="vhdl"> 1 ------------------------------------------------------------------------------- 2 -- 3 -- Copyright (C) 2009, 2010 Dr. Juergen Sauermann 4 -- 5 -- This code is free software: you can redistribute it and/or modify 6 -- it under the terms of the GNU General Public License as published by 7 -- the Free Software Foundation, either version 3 of the License, or 8 -- (at your option) any later version. 9 -- 10 -- This code is distributed in the hope that it will be useful, 11 -- but WITHOUT ANY WARRANTY; without even the implied warranty of 12 -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 -- GNU General Public License for more details. 14 -- 15 -- You should have received a copy of the GNU General Public License 16 -- along with this code (see the file named COPYING). 17 -- If not, see http://www.gnu.org/licenses/. 18 -- 19 ------------------------------------------------------------------------------- 20 ------------------------------------------------------------------------------- 21 -- 22 -- Module Name: io - Behavioral 23 -- Create Date: 13:59:36 11/07/2009 24 -- Description: the I/O of a CPU (uart and general purpose I/O lines). 25 -- 26 ------------------------------------------------------------------------------- 27 -- 28 library IEEE; 29 use IEEE.STD_LOGIC_1164.ALL; 30 use IEEE.STD_LOGIC_ARITH.ALL; 31 use IEEE.STD_LOGIC_UNSIGNED.ALL; 32 33 entity io is 34 port ( I_CLK : in std_logic; 35 36 I_CLR : in std_logic; 37 I_ADR_IO : in std_logic_vector( 7 downto 0); 38 I_DIN : in std_logic_vector( 7 downto 0); 39 I_SWITCH : in std_logic_vector( 7 downto 0); 40 I_RD_IO : in std_logic; 41 I_RX : in std_logic; 42 I_WE_IO : in std_logic; 43 44 Q_7_SEGMENT : out std_logic_vector( 6 downto 0); 45 Q_DOUT : out std_logic_vector( 7 downto 0); 46 Q_INTVEC : out std_logic_vector( 5 downto 0); 47 Q_LEDS : out std_logic_vector( 1 downto 0); 48 Q_TX : out std_logic); 49 end io; 50 51 architecture Behavioral of io is 52 53 component uart 54 generic(CLOCK_FREQ : std_logic_vector(31 downto 0); 55 BAUD_RATE : std_logic_vector(27 downto 0)); 56 port( I_CLK : in std_logic; 57 I_CLR : in std_logic; 58 I_RD : in std_logic; 59 I_WE : in std_logic; 60 I_RX : in std_logic; 61 I_TX_DATA : in std_logic_vector(7 downto 0); 62 63 Q_RX_DATA : out std_logic_vector(7 downto 0); 64 Q_RX_READY : out std_logic; 65 Q_TX : out std_logic; 66 Q_TX_BUSY : out std_logic); 67 end component; 68 69 signal U_RX_READY : std_logic; 70 signal U_TX_BUSY : std_logic; 71 signal U_RX_DATA : std_logic_vector( 7 downto 0); 72 73 signal L_INTVEC : std_logic_vector( 5 downto 0); 74 signal L_LEDS : std_logic; 75 signal L_RD_UART : std_logic; 76 signal L_RX_INT_ENABLED : std_logic; 77 signal L_TX_INT_ENABLED : std_logic; 78 signal L_WE_UART : std_logic; 79 80 begin 81 urt: uart 82 generic map(CLOCK_FREQ => std_logic_vector(conv_unsigned(25000000, 32)), 83 BAUD_RATE => std_logic_vector(conv_unsigned( 38400, 28))) 84 port map( I_CLK => I_CLK, 85 I_CLR => I_CLR, 86 I_RD => L_RD_UART, 87 I_WE => L_WE_UART, 88 I_TX_DATA => I_DIN(7 downto 0), 89 I_RX => I_RX, 90 91 Q_TX => Q_TX, 92 Q_RX_DATA => U_RX_DATA, 93 Q_RX_READY => U_RX_READY, 94 Q_TX_BUSY => U_TX_BUSY); 95 96 -- IO read process 97 -- 98 iord: process(I_ADR_IO, I_SWITCH, 99 U_RX_DATA, U_RX_READY, L_RX_INT_ENABLED, 100 U_TX_BUSY, L_TX_INT_ENABLED) 101 begin 102 -- addresses for mega8 device (use iom8.h or #define __AVR_ATmega8__). 103 -- 104 case I_ADR_IO is 105 when X"2A" => Q_DOUT <= -- UCSRB: 106 L_RX_INT_ENABLED -- Rx complete int enabled. 107 & L_TX_INT_ENABLED -- Tx complete int enabled. 108 & L_TX_INT_ENABLED -- Tx empty int enabled. 109 & '1' -- Rx enabled 110 & '1' -- Tx enabled 111 & '0' -- 8 bits/char 112 & '0' -- Rx bit 8 113 & '0'; -- Tx bit 8 114 when X"2B" => Q_DOUT <= -- UCSRA: 115 U_RX_READY -- Rx complete 116 & not U_TX_BUSY -- Tx complete 117 & not U_TX_BUSY -- Tx ready 118 & '0' -- frame error 119 & '0' -- data overrun 120 & '0' -- parity error 121 & '0' -- double dpeed 122 & '0'; -- multiproc mode 123 when X"2C" => Q_DOUT <= U_RX_DATA; -- UDR 124 when X"40" => Q_DOUT <= -- UCSRC 125 '1' -- URSEL 126 & '0' -- asynchronous 127 & "00" -- no parity 128 & '1' -- two stop bits 129 & "11" -- 8 bits/char 130 & '0'; -- rising clock edge 131 132 when X"36" => Q_DOUT <= I_SWITCH; -- PINB 133 when others => Q_DOUT <= X"AA"; 134 end case; 135 end process; 136 137 -- IO write process 138 -- 139 iowr: process(I_CLK) 140 begin 141 if (rising_edge(I_CLK)) then 142 if (I_CLR = '1') then 143 L_RX_INT_ENABLED <= '0'; 144 L_TX_INT_ENABLED <= '0'; 145 elsif (I_WE_IO = '1') then 146 case I_ADR_IO is 147 when X"38" => Q_7_SEGMENT <= I_DIN(6 downto 0); -- PORTB 148 L_LEDS <= not L_LEDS; 149 when X"40" => -- handled by uart 150 when X"41" => -- handled by uart 151 when X"43" => L_RX_INT_ENABLED <= I_DIN(0); 152 L_TX_INT_ENABLED <= I_DIN(1); 153 when others => 154 end case; 155 end if; 156 end if; 157 end process; 158 159 -- interrupt process 160 -- 161 ioint: process(I_CLK) 162 begin 163 if (rising_edge(I_CLK)) then 164 if (I_CLR = '1') then 165 L_RX_INT_ENABLED <= '0'; 166 L_TX_INT_ENABLED <= '0'; 167 L_INTVEC <= "000000"; 168 else 169 if (L_RX_INT_ENABLED and U_RX_READY) = '1' then 170 if (L_INTVEC(5) = '0') then -- no interrupt pending 171 L_INTVEC <= "101011"; -- _VECTOR(11) 172 end if; 173 elsif (L_TX_INT_ENABLED and not U_TX_BUSY) = '1' then 174 if (L_INTVEC(5) = '0') then -- no interrupt pending 175 L_INTVEC <= "101100"; -- _VECTOR(12) 176 end if; 177 else -- no interrupt 178 L_INTVEC <= "000000"; 179 end if; 180 end if; 181 end if; 182 end process; 183 184 L_WE_UART <= I_WE_IO when (I_ADR_IO = X"2C") else '0'; -- write UART UDR 185 L_RD_UART <= I_RD_IO when (I_ADR_IO = X"2C") else '0'; -- read UART UDR 186 187 Q_LEDS(1) <= L_LEDS; 188 Q_LEDS(0) <= not L_LEDS; 189 Q_INTVEC <= L_INTVEC; 190 191 end Behavioral; 192 <pre class="filename"> src/io.vhd </pre></pre> <P> <P><hr><BR> <table class="ttop"><th class="tpre"><a href="16_Listing_of_data_path.vhd.html">Previous Lesson</a></th><th class="ttop"><a href="toc.html">Table of Content</a></th><th class="tnxt"><a href="18_Listing_of_opc_deco.vhd.html">Next Lesson</a></th></table> </BODY> </HTML>
Go to most recent revision | Compare with Previous | Blame | View Log