Subversion Repositories crcahb

//This module implements the combinational logic for one iteration of CRC Calculation
//If conected to shift register and after n clock cycles, this module realize CRC calculation
//for n bits of data.
//If instantiated in serial form, this module realize the parallel CRC calculation
//for n bits of data.
module crc_comb
#(
	parameter CRC_SIZE      = 8,         // Define the size of CRC Code
 	parameter MASK          = 8'hff      // This mask define the level of configurability of the module
)(
	//OUTPUTS
	output [CRC_SIZE - 1 : 0] crc_out,   // CRC code after one round of calculation
	//INPUTS
	input                    data_in,    // One bit of data block
	input [CRC_SIZE - 1 : 0] crc_in,     // In cascated mode, this input is the previous calculated CRC code
	input [CRC_SIZE - 1 : 0] crc_poly,   // Generator Polynomial
  input [CRC_SIZE - 2 : 0] crc_poly_size
);
 
wire [CRC_SIZE - 2 : 0] MASK_REVERSED;
wire [CRC_SIZE - 1 : 0] feedback;
wire [CRC_SIZE - 2 : 0] crc_in_masked;
wire [CRC_SIZE - 2 : 0] crc_poly_size_reversed;
 
generate
  genvar i;
  for(i = 0; i < CRC_SIZE - 1; i = i + 1)
    begin
			assign crc_poly_size_reversed[i] = crc_poly_size[CRC_SIZE - 2 - i];
   		assign MASK_REVERSED[i] = MASK[CRC_SIZE - 2 - i]; 
		end
endgenerate
 
assign feedback = crc_poly & {CRC_SIZE{crc_in[CRC_SIZE - 1] ^ data_in}};
assign crc_in_masked = crc_in[CRC_SIZE - 2 : 0] & (~(crc_poly_size_reversed[CRC_SIZE - 2 : 0] & MASK_REVERSED)); 
assign crc_out = {crc_in_masked ^ feedback[CRC_SIZE - 1 : 1], feedback[0]}; 
 
endmodule