URL
https://opencores.org/ocsvn/darkriscv/darkriscv/trunk
Subversion Repositories darkriscv
[/] [darkriscv/] [trunk/] [boards/] [README.md] - Rev 4
Go to most recent revision | Compare with Previous | Blame | View Log
## Add your board here! o/
Use the AVNET Microboard LX9 as template, since is the best tested board at this
moment, as long I can plug it in the computer and test it in less than five
minutes:
cp -rp avnet_micrboard_lx9 vendor_board_fpga
In the case of Vivado, the easy way is use the QMTech Spartan-7 board as
template. In the case of Vivado, there is no automation as found in the
other FPGAs.
Current supported board/FPGAs:
avnet_microboard_lx9
qmtech_sdram_lx16
qmtech spartan7 s15
xilinx_ac701_a200
lattice brevia2 lxp2
piswords rs485 lx9
I am working in a way to make the directory structure better, but it is not
so easy make everything work at the same time! :)
Proposed structure:
boards/vendor_boardname_fpga/ top level directory
boards/vendor_boardname_fpga/darksocv.mk top level makefile
boards/vendor_boardname_fpga/darksocv.* other files (board/fpga specific)
In the current directory is possible set:
make BOARD=avnet_microboard_lx9 all # build fpga for $BOARD
make install # program fpga
Of course, the FPGA programming via JTAG depends of some configurations
which are different in different environments. Please check the README file
regarding the board!
Go to most recent revision | Compare with Previous | Blame | View Log