URL
https://opencores.org/ocsvn/dbg_interface/dbg_interface/trunk
Subversion Repositories dbg_interface
[/] [dbg_interface/] [tags/] [sdram_test_working/] [bench/] [verilog/] [dbg_tb.v] - Rev 5
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// dbg_tb.v //// //// //// //// //// //// This file is part of the SoC/OpenRISC Development Interface //// //// http://www.opencores.org/cores/DebugInterface/ //// //// //// //// //// //// Author(s): //// //// Igor Mohor //// //// igorm@opencores.org //// //// //// //// //// //// All additional information is avaliable in the README.txt //// //// file. //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000,2001 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.1.1.1 2001/09/13 13:49:19 mohor // Initial official release. // // Revision 1.3 2001/06/01 22:23:40 mohor // This is a backup. It is not a fully working version. Not for use, yet. // // Revision 1.2 2001/05/18 13:10:05 mohor // Headers changed. All additional information is now avaliable in the README.txt file. // // Revision 1.1.1.1 2001/05/18 06:35:15 mohor // Initial release // // `include "dbg_timescale.v" `include "dbg_defines.v" `include "dbg_tb_defines.v" // Test bench module dbg_tb; parameter Tp = 1; parameter Tclk = 50; // Clock half period (Clok period = 100 ns => 10 MHz) reg P_TMS, P_TCK; reg P_TRST, P_TDI; reg P_PowerONReset; reg Mclk; reg [10:0] Wp; reg Bp; reg [3:0] LsStatus; reg [1:0] IStatus; reg BS_CHAIN_I; wire P_TDO; wire [31:0] ADDR_RISC; wire [31:0] DATAIN_RISC; // DATAIN_RISC is connect to DATAOUT wire RISC_CS; wire RISC_RW; wire RISC_STALL_O; wire RISC_RESET_O; wire [31:0] DATAOUT_RISC; // DATAOUT_RISC is connect to DATAIN wire [`OPSELECTWIDTH-1:0] OpSelect; // Connecting TAP module dbg_top dbgTAP1(.P_TMS(P_TMS), .P_TCK(P_TCK), .P_TRST(P_TRST), .P_TDI(P_TDI), .P_TDO(P_TDO), .P_PowerONReset(P_PowerONReset), .Mclk(Mclk), .RISC_ADDR(ADDR_RISC), .RISC_DATA_IN(DATAOUT_RISC), .RISC_DATA_OUT(DATAIN_RISC), .RISC_CS(RISC_CS), .RISC_RW(RISC_RW), .Wp(Wp), .Bp(Bp), .OpSelect(OpSelect), .LsStatus(LsStatus), .IStatus(IStatus), .RISC_STALL_O(RISC_STALL_O), .RISC_RESET_O(RISC_RESET_O), .BS_CHAIN_I(BS_CHAIN_I) ); reg TestEnabled; //integer i; initial begin TestEnabled<=#Tp 0; P_TMS<=#Tp 0; P_TCK<=#Tp 0; P_TDI<=#Tp 0; P_TRST<=#Tp 1; Wp<=#Tp 0; Bp<=#Tp 0; LsStatus<=#Tp 0; IStatus<=#Tp 0; P_PowerONReset<=#Tp 1; #100 P_PowerONReset<=#Tp 0; // PowerONReset is active low #100 P_PowerONReset<=#Tp 1; #Tp TestEnabled<=#Tp 1; end // Generating master clock (RISC clock) 200 MHz initial begin Mclk<=#Tp 0; #1 forever #`RISC_CLOCK Mclk<=~Mclk; end // Generating random number for use in DATAOUT_RISC[31:0] reg [31:0] RandNumb; always @ (posedge Mclk or negedge P_PowerONReset) // PowerONReset is active low begin if(~P_PowerONReset) RandNumb[31:0]<=#Tp 0; else RandNumb[31:0]<=#Tp RandNumb[31:0] + 1; end assign DATAOUT_RISC[31:0] = RandNumb[31:0]; always @ (posedge TestEnabled) begin ResetTAP; GotoRunTestIdle; // Testing read and write to RISC registers SetInstruction(`CHAIN_SELECT); ChainSelect(`RISC_DEBUG_CHAIN, 8'h38); // {chain, crc} SetInstruction(`DEBUG); ReadRISCRegister(32'h12345ead, 8'hbf); // {addr, crc} WriteRISCRegister(32'h11223344, 32'h12345678, 8'haf); // {data, addr, crc} // // Testing read and write to internal registers SetInstruction(`IDCODE); ReadIDCode; SetInstruction(`CHAIN_SELECT); ChainSelect(`REGISTER_SCAN_CHAIN, 8'h0e); // {chain, crc} SetInstruction(`DEBUG); /* // Testing internal registers ReadRegister(`MODER_ADR, 8'h00); // {addr, crc} ReadRegister(`TSEL_ADR, 8'h64); // {addr, crc} ReadRegister(`QSEL_ADR, 8'h32); // {addr, crc} ReadRegister(`SSEL_ADR, 8'h56); // {addr, crc} ReadRegister(`RECSEL_ADR, 8'hc4); // {addr, crc} ReadRegister(5'h1f, 8'h04); // {addr, crc} // Register address don't exist. Read should return high-Z. ReadRegister(5'h1f, 8'h04); // {addr, crc} // Register address don't exist. Read should return high-Z. WriteRegister(32'h00000001, `MODER_ADR, 8'h53); // {data, addr, crc} WriteRegister(32'h00000020, `TSEL_ADR, 8'h5e); // {data, addr, crc} WriteRegister(32'h00000300, `QSEL_ADR, 8'hdd); // {data, addr, crc} WriteRegister(32'h00004000, `SSEL_ADR, 8'he2); // {data, addr, crc} WriteRegister(32'h0000dead, `RECSEL_ADR, 8'hfb); // {data, addr, crc} ReadRegister(`MODER_ADR, 8'h00); // {addr, crc} ReadRegister(`TSEL_ADR, 8'h64); // {addr, crc} ReadRegister(`QSEL_ADR, 8'h32); // {addr, crc} ReadRegister(`SSEL_ADR, 8'h56); // {addr, crc} ReadRegister(`RECSEL_ADR, 8'hc4); // {addr, crc} ReadRegister(5'h1f, 8'h04); // {addr, crc} // Register address don't exist. Read should return high-Z. ReadRegister(5'h1f, 8'h04); // {addr, crc} // Register address don't exist. Read should return high-Z. */ // testing trigger and qualifier `ifdef TRACE_ENABLED /* Anything starts trigger and qualifier #1000 WriteRegister(32'h00000000, `QSEL_ADR, 8'h50); // Any qualifier #1000 WriteRegister(32'h00000000, `TSEL_ADR, 8'h06); // Any trigger #1000 WriteRegister(32'h00000003, `RECSEL_ADR, 8'h0c); // Two samples are selected for recording (RECPC and RECLSEA) #100 WriteRegister(32'h00000000, `SSEL_ADR, 8'h34); // No stop signal #1000 WriteRegister(`ENABLE, `MODER_ADR, 8'hd4); // Trace enabled // End: Anything starts trigger and qualifier */ // Anything starts trigger, breakpoint starts qualifier #1000 WriteRegister(`QUALIFOP_OR | `BPQUALIFVALID | `BPQUALIF, `QSEL_ADR, 8'had); // Any qualifier #1000 WriteRegister(32'h00000000, `TSEL_ADR, 8'h06); // Any trigger #1000 WriteRegister(32'hffffffff, `RECSEL_ADR, 8'h78); // Two samples are selected for recording (RECSDATA and RECLDATA) #1000 WriteRegister(32'h00000000, `SSEL_ADR, 8'h34); // No stop signal #1000 WriteRegister(`ENABLE, `MODER_ADR, 8'hd4); // Trace enabled wait(dbg_tb.dbgTAP1.TraceEnable) @ (posedge Mclk); #1 Bp = 1; // Set breakpoint repeat(8) @(posedge Mclk); wait(dbg_tb.dbgTAP1.dbgTrace1.RiscStall) #1 Bp = 0; // Clear breakpoint // End: Anything starts trigger, breakpoint starts qualifier /* Anything starts qualifier, breakpoint starts trigger #1000 WriteRegister(32'h00000000, `QSEL_ADR, 8'h50); // Any qualifier #1000 WriteRegister(`LSSTRIG_0 | `LSSTRIG_2 | `LSSTRIGVALID | `WPTRIG_4 | `WPTRIGVALID | `TRIGOP_AND, `TSEL_ADR, 8'had); // Trigger is AND of Watchpoint4 and LSSTRIG[0] and LSSTRIG[2] #1000 WriteRegister(32'h00000003, `RECSEL_ADR, 8'h0c); // Two samples are selected for recording (RECPC and RECLSEA) #1000 WriteRegister(32'h00000000, `SSEL_ADR, 8'h34); // No stop signal #1000 WriteRegister(`ENABLE, `MODER_ADR, 8'hd4); // Trace enabled wait(dbg_tb.dbgTAP1.TraceEnable) @ (posedge Mclk) Wp[4] = 1; // Set watchpoint[4] LsStatus = 4'h5; // LsStatus[0] and LsStatus[2] are active @ (posedge Mclk) Wp[4] = 0; // Clear watchpoint[4] LsStatus = 4'h0; // LsStatus[0] and LsStatus[2] are cleared // End: Anything starts trigger and qualifier */ SetInstruction(`CHAIN_SELECT); ChainSelect(`TRACE_TEST_CHAIN, 8'h24); // {chain, crc} SetInstruction(`DEBUG); ReadTraceBuffer; ReadTraceBuffer; ReadTraceBuffer; ReadTraceBuffer; ReadTraceBuffer; ReadTraceBuffer; ReadTraceBuffer; ReadTraceBuffer; ReadTraceBuffer; ReadTraceBuffer; ReadTraceBuffer; ReadTraceBuffer; // for(i=0;i<1500;i=i+1) // ReadTraceBuffer; `endif // TRACE_ENABLED #5000 GenClk(1); // One extra TCLK for debugging purposes #1000 $stop; end // Generation of the TCLK signal task GenClk; input [7:0] Number; integer i; begin for(i=0; i<Number; i=i+1) begin #Tclk P_TCK<=1; #Tclk P_TCK<=0; end end endtask // TAP reset task ResetTAP; begin P_TMS<=#Tp 1; GenClk(7); end endtask // Goes to RunTestIdle state task GotoRunTestIdle; begin P_TMS<=#Tp 0; GenClk(1); end endtask // sets the instruction to the IR register and goes to the RunTestIdle state task SetInstruction; input [3:0] Instr; integer i; begin P_TMS<=#Tp 1; GenClk(2); P_TMS<=#Tp 0; GenClk(2); // we are in shiftIR for(i=0; i<`IR_LENGTH-1; i=i+1) begin P_TDI<=#Tp Instr[i]; GenClk(1); end P_TDI<=#Tp Instr[i]; // last shift P_TMS<=#Tp 1; // going out of shiftIR GenClk(1); P_TDI<=#Tp 'hz; // tri-state GenClk(1); P_TMS<=#Tp 0; GenClk(1); // we are in RunTestIdle end endtask // sets the selected scan chain and goes to the RunTestIdle state task ChainSelect; input [3:0] Data; input [7:0] Crc; integer i; begin P_TMS<=#Tp 1; GenClk(1); P_TMS<=#Tp 0; GenClk(2); // we are in shiftDR for(i=0; i<`CHAIN_ID_LENGTH; i=i+1) begin P_TDI<=#Tp Data[i]; GenClk(1); end for(i=0; i<`CRC_LENGTH-1; i=i+1) begin P_TDI<=#Tp Crc[i]; GenClk(1); end P_TDI<=#Tp Crc[i]; // last shift P_TMS<=#Tp 1; // going out of shiftIR GenClk(1); P_TDI<=#Tp 'hz; // tri-state GenClk(1); P_TMS<=#Tp 0; GenClk(1); // we are in RunTestIdle end endtask // Reads the ID code task ReadIDCode; begin P_TMS<=#Tp 1; GenClk(1); P_TMS<=#Tp 0; GenClk(2); // we are in shiftDR P_TDI<=#Tp 0; GenClk(31); P_TMS<=#Tp 1; // going out of shiftIR GenClk(1); P_TDI<=#Tp 'hz; // tri-state GenClk(1); P_TMS<=#Tp 0; GenClk(1); // we are in RunTestIdle end endtask // Reads sample from the Trace Buffer task ReadTraceBuffer; begin P_TMS<=#Tp 1; GenClk(1); P_TMS<=#Tp 0; GenClk(2); // we are in shiftDR P_TDI<=#Tp 0; GenClk(47); P_TMS<=#Tp 1; // going out of shiftIR GenClk(1); P_TDI<=#Tp 'hz; // tri-state GenClk(1); P_TMS<=#Tp 0; GenClk(1); // we are in RunTestIdle end endtask // Reads the RISC register and latches the data so it is ready for reading task ReadRISCRegister; input [31:0] Address; input [7:0] Crc; integer i; begin P_TMS<=#Tp 1; GenClk(1); P_TMS<=#Tp 0; GenClk(2); // we are in shiftDR for(i=0; i<32; i=i+1) begin P_TDI<=#Tp Address[i]; // Shifting address GenClk(1); end P_TDI<=#Tp 0; // shifting RW bit = read GenClk(1); for(i=0; i<32; i=i+1) begin P_TDI<=#Tp 0; // Shifting data. Data is not important in read cycle. GenClk(1); end for(i=0; i<`CRC_LENGTH-1; i=i+1) begin P_TDI<=#Tp Crc[i]; // Shifting CRC. GenClk(1); end P_TDI<=#Tp Crc[i]; // Shifting last bit of CRC. P_TMS<=#Tp 1; // going out of shiftIR GenClk(1); P_TDI<=#Tp 'hz; // Tristate TDI. GenClk(1); P_TMS<=#Tp 0; GenClk(1); // we are in RunTestIdle end endtask // Write the RISC register task WriteRISCRegister; input [31:0] Data; input [31:0] Address; input [`CRC_LENGTH-1:0] Crc; integer i; begin P_TMS<=#Tp 1; GenClk(1); P_TMS<=#Tp 0; GenClk(2); // we are in shiftDR for(i=0; i<32; i=i+1) begin P_TDI<=#Tp Address[i]; // Shifting address GenClk(1); end P_TDI<=#Tp 1; // shifting RW bit = write GenClk(1); for(i=0; i<32; i=i+1) begin P_TDI<=#Tp Data[i]; // Shifting data GenClk(1); end for(i=0; i<`CRC_LENGTH-1; i=i+1) begin P_TDI<=#Tp Crc[i]; // Shifting CRC GenClk(1); end P_TDI<=#Tp Crc[i]; // shifting last bit of CRC P_TMS<=#Tp 1; // going out of shiftIR GenClk(1); P_TDI<=#Tp 'hz; // tristate TDI GenClk(1); P_TMS<=#Tp 0; GenClk(1); // we are in RunTestIdle GenClk(10); // Generating few clock cycles needed for the write operation to accomplish end endtask // Reads the register and latches the data so it is ready for reading task ReadRegister; input [4:0] Address; input [7:0] Crc; integer i; begin P_TMS<=#Tp 1; GenClk(1); P_TMS<=#Tp 0; GenClk(2); // we are in shiftDR for(i=0; i<5; i=i+1) begin P_TDI<=#Tp Address[i]; // Shifting address GenClk(1); end P_TDI<=#Tp 0; // shifting RW bit = read GenClk(1); for(i=0; i<32; i=i+1) begin P_TDI<=#Tp 0; // Shifting data. Data is not important in read cycle. GenClk(1); end for(i=0; i<`CRC_LENGTH-1; i=i+1) begin P_TDI<=#Tp Crc[i]; // Shifting CRC. CRC is not important in read cycle. GenClk(1); end P_TDI<=#Tp Crc[i]; // Shifting last bit of CRC. P_TMS<=#Tp 1; // going out of shiftIR GenClk(1); P_TDI<=#Tp 'hz; // Tri state TDI GenClk(1); P_TMS<=#Tp 0; GenClk(1); // we are in RunTestIdle GenClk(10); // Generating few clock cycles needed for the read operation to accomplish end endtask // Write the register task WriteRegister; input [31:0] Data; input [4:0] Address; input [`CRC_LENGTH-1:0] Crc; integer i; begin P_TMS<=#Tp 1; GenClk(1); P_TMS<=#Tp 0; GenClk(2); // we are in shiftDR for(i=0; i<5; i=i+1) begin P_TDI<=#Tp Address[i]; // Shifting address GenClk(1); end P_TDI<=#Tp 1; // shifting RW bit = write GenClk(1); for(i=0; i<32; i=i+1) begin P_TDI<=#Tp Data[i]; // Shifting data GenClk(1); end for(i=0; i<`CRC_LENGTH-1; i=i+1) begin P_TDI<=#Tp Crc[i]; // Shifting CRC GenClk(1); end P_TDI<=#Tp Crc[i]; // Shifting last bit of CRC P_TMS<=#Tp 1; // going out of shiftIR GenClk(1); P_TDI<=#Tp 'hz; // Tri state TDI GenClk(1); P_TMS<=#Tp 0; GenClk(1); // we are in RunTestIdle GenClk(5); // Igor !!!! To mora iti ven. Tu je le zato, da se tisti write-i naredijo end endtask /********************************************************************************** * * * Printing the information to the screen * * * **********************************************************************************/ // Print samples that are recorded to the trace buffer `ifdef TRACE_ENABLED always @ (posedge Mclk) begin if(dbg_tb.dbgTAP1.dbgTrace1.WriteSample) $write("\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\tWritten to Trace buffer: WritePointer=0x%x, Data=0x%x", dbg_tb.dbgTAP1.dbgTrace1.WritePointer, {dbg_tb.dbgTAP1.dbgTrace1.DataIn, 1'b0, dbg_tb.dbgTAP1.dbgTrace1.OpSelect[`OPSELECTWIDTH-1:0]}); end `endif // Print selected instruction reg UpdateIR_q; always @ (posedge P_TCK) begin UpdateIR_q<=#Tp dbg_tb.dbgTAP1.UpdateIR; end always @ (posedge P_TCK) begin if(UpdateIR_q) case(dbg_tb.dbgTAP1.JTAG_IR[`IR_LENGTH-1:0]) `EXTEST : $write("\n\tInstruction EXTEST"); `SAMPLE_PRELOAD : $write("\n\tInstruction SAMPLE_PRELOAD"); `IDCODE : $write("\n\tInstruction IDCODE"); `CHAIN_SELECT : $write("\n\tInstruction CHAIN_SELECT"); `INTEST : $write("\n\tInstruction INTEST"); `CLAMP : $write("\n\tInstruction CLAMP"); `CLAMPZ : $write("\n\tInstruction CLAMPZ"); `HIGHZ : $write("\n\tInstruction HIGHZ"); `DEBUG : $write("\n\tInstruction DEBUG"); `BYPASS : $write("\n\tInstruction BYPASS"); default : $write("\n\tInstruction not valid. Instruction BYPASS activated !!!"); endcase end // Print selected chain always @ (posedge P_TCK) begin if(dbg_tb.dbgTAP1.CHAIN_SELECTSelected & dbg_tb.dbgTAP1.UpdateDR_q) case(dbg_tb.dbgTAP1.Chain[`CHAIN_ID_LENGTH-1:0]) `GLOBAL_BS_CHAIN : $write("\nChain GLOBAL_BS_CHAIN"); `RISC_DEBUG_CHAIN : $write("\nChain RISC_DEBUG_CHAIN"); `RISC_TEST_CHAIN : $write("\nChain RISC_TEST_CHAIN"); `TRACE_TEST_CHAIN : $write("\nChain TRACE_TEST_CHAIN"); `REGISTER_SCAN_CHAIN : $write("\nChain REGISTER_SCAN_CHAIN"); endcase end // print RISC registers read/write always @ (posedge Mclk) begin if(dbg_tb.dbgTAP1.RISC_CS) if(dbg_tb.dbgTAP1.RISC_RW) begin $write("\n\t\tWrite to RISC Register (addr=0x%h, data=0x%h)", dbg_tb.dbgTAP1.ADDR[31:0], dbg_tb.dbgTAP1.DataOut[31:0]); end else begin $write("\n\t\tRead from RISC Register (addr=0x%h, data=0x%h)", dbg_tb.dbgTAP1.ADDR[31:0], dbg_tb.dbgTAP1.RISC_DATA_IN[31:0]); end end // print registers read/write always @ (posedge Mclk) begin if(dbg_tb.dbgTAP1.RegAccess_q & ~dbg_tb.dbgTAP1.RegAccess_q2) begin if(dbg_tb.dbgTAP1.RW) $write("\n\t\tWrite to Register (addr=0x%h, data=0x%h)", dbg_tb.dbgTAP1.ADDR[4:0], dbg_tb.dbgTAP1.DataOut[31:0]); else $write("\n\t\tRead from Register (addr=0x%h, data=0x%h)", dbg_tb.dbgTAP1.ADDR[4:0], dbg_tb.dbgTAP1.RegDataIn[31:0]); end end // print CRC error `ifdef TRACE_ENABLED wire CRCErrorReport = ~(dbg_tb.dbgTAP1.CrcMatch & (dbg_tb.dbgTAP1.CHAIN_SELECTSelected | dbg_tb.dbgTAP1.DEBUGSelected & dbg_tb.dbgTAP1.RegisterScanChain | dbg_tb.dbgTAP1.DEBUGSelected & dbg_tb.dbgTAP1.RiscDebugScanChain | dbg_tb.dbgTAP1.DEBUGSelected & dbg_tb.dbgTAP1.TraceTestScanChain)); `else // TRACE_ENABLED not enabled wire CRCErrorReport = ~(dbg_tb.dbgTAP1.CrcMatch & (dbg_tb.dbgTAP1.CHAIN_SELECTSelected | dbg_tb.dbgTAP1.DEBUGSelected & dbg_tb.dbgTAP1.RegisterScanChain | dbg_tb.dbgTAP1.DEBUGSelected & dbg_tb.dbgTAP1.RiscDebugScanChain)); `endif always @ (posedge P_TCK) begin if(dbg_tb.dbgTAP1.UpdateDR & ~dbg_tb.dbgTAP1.IDCODESelected) begin if(dbg_tb.dbgTAP1.CHAIN_SELECTSelected) $write("\t\tCrcIn=0x%h, CrcOut=0x%h", dbg_tb.dbgTAP1.JTAG_DR_IN[11:4], dbg_tb.dbgTAP1.CalculatedCrcOut[`CRC_LENGTH-1:0]); else if(dbg_tb.dbgTAP1.RegisterScanChain & ~dbg_tb.dbgTAP1.CHAIN_SELECTSelected) $write("\t\tCrcIn=0x%h, CrcOut=0x%h", dbg_tb.dbgTAP1.JTAG_DR_IN[45:38], dbg_tb.dbgTAP1.CalculatedCrcOut[`CRC_LENGTH-1:0]); else if(dbg_tb.dbgTAP1.RiscDebugScanChain & ~dbg_tb.dbgTAP1.CHAIN_SELECTSelected) $write("\t\tCrcIn=0x%h, CrcOut=0x%h", dbg_tb.dbgTAP1.JTAG_DR_IN[72:65], dbg_tb.dbgTAP1.CalculatedCrcOut[`CRC_LENGTH-1:0]); if(CRCErrorReport) begin $write("\n\t\t\t\tCrc Error when receiving data (read or write) !!! CrcIn should be: 0x%h\n", dbg_tb.dbgTAP1.CalculatedCrcIn); #1000 $stop; end end end // Print shifted IDCode reg [31:0] TempData; always @ (posedge P_TCK) begin if(dbg_tb.dbgTAP1.IDCODESelected) begin if(dbg_tb.dbgTAP1.ShiftDR) TempData[31:0]<=#Tp {dbg_tb.dbgTAP1.TDOData, TempData[31:1]}; else if(dbg_tb.dbgTAP1.UpdateDR) $write("\n\t\tIDCode = 0x%h", TempData[31:0]); end end // Print data from the trace buffer reg [47:0] TraceData; always @ (posedge P_TCK) begin if(dbg_tb.dbgTAP1.DEBUGSelected & (dbg_tb.dbgTAP1.Chain==`TRACE_TEST_CHAIN)) begin if(dbg_tb.dbgTAP1.ShiftDR) TraceData[47:0]<=#Tp {dbg_tb.dbgTAP1.TDOData, TraceData[47:1]}; else if(dbg_tb.dbgTAP1.UpdateDR) $write("\n\t\TraceData = 0x%h + Crc = 0x%h", TraceData[39:0], TraceData[47:40]); end end endmodule // TB
Go to most recent revision | Compare with Previous | Blame | View Log