Subversion Repositories dbg_interface

#!/bin/csh -f

if ( $# < 1 ) then
    echo "Top level module name is dbg_tb"
    set SIM_TOP = dbg_tb
#    exit
else
    set SIM_TOP = $1
endif

set current_par = 1
set output_waveform = 0
while ( $current_par < $# )
    @ current_par = $current_par + 1
    case wave:
        @ output_waveform = 1
        breaksw
    default:
        echo 'Unknown option "'$argv[$current_par]'"!'
        exit
        breaksw
    endsw
end

echo "-CDSLIB ../bin/cds.lib"          > ncvlog.args
echo "-HDLVAR ../bin/hdl.var"         >> ncvlog.args
echo "-MESSAGES"                      >> ncvlog.args
echo "-INCDIR ../../../bench/verilog" >> ncvlog.args
echo "-INCDIR ../../../rtl/verilog"   >> ncvlog.args
echo "-INCDIR ../../../../jtag/tap/rtl/verilog"   >> ncvlog.args
echo "-NOCOPYRIGHT"                   >> ncvlog.args
echo "-LOGFILE ../log/ncvlog.log"     >> ncvlog.args


#foreach filename ( `cat ../bin/rtl_file_list` )
#    echo "../../../rtl/verilog/"$filename >> ncvlog.args
#end
#
#foreach filename ( `cat ../bin/sim_file_list` )
#    echo "../../../bench/verilog/"$filename >> ncvlog.args
#end


# RTL files
echo "../../../rtl/verilog/dbg_crc32_d1.v" >> ncvlog.args
echo "../../../rtl/verilog/dbg_wb.v" >> ncvlog.args
echo "../../../rtl/verilog/dbg_register.v" >> ncvlog.args
echo "../../../rtl/verilog/dbg_cpu_registers.v" >> ncvlog.args
echo "../../../rtl/verilog/dbg_cpu.v" >> ncvlog.args
echo "../../../rtl/verilog/dbg_top.v" >> ncvlog.args
echo "../../../../jtag/tap/rtl/verilog/tap_top.v" >> ncvlog.args


# Simulation files
echo "../../../bench/verilog/timescale.v" >> ncvlog.args
echo "../../../bench/verilog/wb_slave_behavioral.v" >> ncvlog.args
echo "../../../bench/verilog/cpu_behavioral.v" >> ncvlog.args
echo "../../../bench/verilog/dbg_tb.v" >> ncvlog.args

ncvlog -f ncvlog.args

echo "-MESSAGES"                             > ncelab.args
echo "-NOCOPYRIGHT"                         >> ncelab.args
echo "-CDSLIB ../bin/cds.lib"               >> ncelab.args
echo "-HDLVAR ../bin/hdl.var"               >> ncelab.args
echo "-LOGFILE ../log/ncelab.log"           >> ncelab.args
echo "-SNAPSHOT worklib.bench:rtl"          >> ncelab.args
echo "-NO_TCHK_MSG"                         >> ncelab.args
echo "-ACCESS +RWC"                         >> ncelab.args
echo worklib.$SIM_TOP                       >> ncelab.args

ncelab -f ncelab.args

echo "-MESSAGES"                   > ncsim.args
echo "-NOCOPYRIGHT"               >> ncsim.args
echo "-CDSLIB ../bin/cds.lib"     >> ncsim.args
echo "-HDLVAR ../bin/hdl.var"     >> ncsim.args
echo "-INPUT ncsim.tcl"           >> ncsim.args
echo "-LOGFILE ../log/ncsim.log"  >> ncsim.args
echo "worklib.bench:rtl"          >> ncsim.args

if ( $output_waveform ) then
    echo "database -open waves -shm -into ../out/waves.shm"             > ./ncsim.tcl
    echo "probe -create -database waves $SIM_TOP -shm -all -depth all" >> ./ncsim.tcl
    echo "run"                                                         >> ./ncsim.tcl
else
    echo "run"  > ./ncsim.tcl
endif

echo "quit" >> ncsim.tcl

ncsim -LICQUEUE -f ./ncsim.args