URL
https://opencores.org/ocsvn/dma_ahb/dma_ahb/trunk
Subversion Repositories dma_ahb
[/] [dma_ahb/] [trunk/] [src/] [dma_ahb32/] [dma_ahb32_core0_wdt.v] - Rev 4
Compare with Previous | Blame | View Log
///////////////////////////////////////////////////////////////////// //// //// //// Author: Eyal Hochberg //// //// eyal@provartec.com //// //// //// //// Downloaded from: http://www.opencores.org //// ///////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2010 Provartec LTD //// //// www.provartec.com //// //// info@provartec.com //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer.//// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation.//// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more//// //// details. http://www.gnu.org/licenses/lgpl.html //// //// //// ///////////////////////////////////////////////////////////////////// //--------------------------------------------------------- //-- File generated by RobustVerilog parser //-- Version: 1.0 //-- Invoked Fri Mar 25 23:31:22 2011 //-- //-- Source file: dma_core_wdt.v //--------------------------------------------------------- module dma_ahb32_core0_wdt(clk,reset,ch_active,rd_burst_start,rd_ch_num,wr_burst_start,wr_ch_num,wdt_timeout,wdt_ch_num); input clk; input reset; input [7:0] ch_active; input rd_burst_start; input [2:0] rd_ch_num; input wr_burst_start; input [2:0] wr_ch_num; output wdt_timeout; output [2:0] wdt_ch_num; reg [`WDT_BITS-1:0] counter; reg [2:0] wdt_ch_num; wire current_ch_active; wire current_burst_start; wire advance; wire idle; assign idle = ch_active == 8'd0; assign current_ch_active = ch_active[wdt_ch_num]; assign current_burst_start = (rd_burst_start & (rd_ch_num == wdt_ch_num)) | (wr_burst_start & (wr_ch_num == wdt_ch_num)); assign advance = (!current_ch_active) | current_burst_start | wdt_timeout; always @(posedge clk or posedge reset) if (reset) wdt_ch_num <= #1 3'd0; else if (advance) wdt_ch_num <= #1 wdt_ch_num + 1'b1; assign wdt_timeout = (counter == 'd0); always @(posedge clk or posedge reset) if (reset) counter <= #1 {`WDT_BITS{1'b1}}; else if (advance | idle) counter <= #1 {`WDT_BITS{1'b1}}; else counter <= #1 counter - 1'b1; endmodule