Subversion Repositories dma_ahb

//---------------------------------------------------------
//-- File generated by RobustVerilog parser
//-- Version: 1.0
//-- Invoked Fri Mar 25 23:33:00 2011
//--
//-- Source file: prgen_fifo.v
//---------------------------------------------------------
 
 
 
module prgen_fifo(clk,reset,push,pop,din,dout,empty,full);
 
   parameter                  WIDTH      = 8;
   parameter                  DEPTH_FULL = 8;
 
   parameter               SINGLE     = DEPTH_FULL == 1;
   parameter               DEPTH      = SINGLE ? 1 : DEPTH_FULL -1;
   parameter               DEPTH_BITS = 
                  (DEPTH <= 2)   ? 1 :
                  (DEPTH <= 4)   ? 2 :
                  (DEPTH <= 8)   ? 3 :
                  (DEPTH <= 16)  ? 4 :
                  (DEPTH <= 32)  ? 5 :
                  (DEPTH <= 64)  ? 6 :
                  (DEPTH <= 128) ? 7 : 
                  (DEPTH <= 256) ? 8 : 0; //0 is ilegal
 
   parameter               LAST_LINE  = DEPTH-1;
 
 
 
   input                      clk;
   input                      reset;
 
   input               push;
   input               pop;
   input [WIDTH-1:0]           din;
   output [WIDTH-1:0]           dout;
   //output               next;
   output               empty;
   output               full;
 
 
   wire               reg_push;
   wire               reg_pop;
   wire               fifo_push;
   wire               fifo_pop;
 
   reg [DEPTH-1:0]           fullness_in;
   reg [DEPTH-1:0]           fullness_out;
   reg [DEPTH-1:0]           fullness;
   reg [WIDTH-1:0]           fifo [DEPTH-1:0];
   wire               fifo_empty;
   wire               next;
   reg [WIDTH-1:0]           dout;
   reg                   dout_empty;
   reg [DEPTH_BITS-1:0]       ptr_in;
   reg [DEPTH_BITS-1:0]       ptr_out;
 
 
 
 
   assign               reg_push  = push & fifo_empty & (dout_empty | pop);
   assign               reg_pop   = pop & fifo_empty;
   assign               fifo_push = !SINGLE & push & (~reg_push);
   assign               fifo_pop  = !SINGLE & pop & (~reg_pop);
 
 
   always @(posedge clk or posedge reset)
     if (reset)
       begin
      dout       <= #1 {WIDTH{1'b0}};
      dout_empty <= #1 1'b1;
       end
     else if (reg_push)
       begin
      dout       <= #1 din;
      dout_empty <= #1 1'b0;
       end
     else if (reg_pop)
       begin
      dout       <= #1 {WIDTH{1'b0}};
      dout_empty <= #1 1'b1;
       end
     else if (fifo_pop)
       begin
      dout       <= #1 fifo[ptr_out];
      dout_empty <= #1 1'b0;
       end
 
   always @(posedge clk or posedge reset)
     if (reset)
       ptr_in <= #1 {DEPTH_BITS{1'b0}};
     else if (fifo_push)
       ptr_in <= #1 ptr_in == LAST_LINE ? 0 : ptr_in + 1'b1;
 
   always @(posedge clk or posedge reset)
     if (reset)
       ptr_out <= #1 {DEPTH_BITS{1'b0}};
     else if (fifo_pop)
       ptr_out <= #1 ptr_out == LAST_LINE ? 0 : ptr_out + 1'b1;
 
   always @(posedge clk)
     if (fifo_push)
       fifo[ptr_in] <= #1 din;
 
 
   always @(/*AUTOSENSE*/fifo_push or ptr_in)
     begin
    fullness_in = {DEPTH{1'b0}};
    fullness_in[ptr_in] = fifo_push;
     end
 
   always @(/*AUTOSENSE*/fifo_pop or ptr_out)
     begin
    fullness_out = {DEPTH{1'b0}};
    fullness_out[ptr_out] = fifo_pop;
     end
 
   always @(posedge clk or posedge reset)
     if (reset)
       fullness <= #1 {DEPTH{1'b0}};
     else if (fifo_push | fifo_pop)
       fullness <= #1 (fullness & (~fullness_out)) | fullness_in;
 
 
   assign next       = |fullness;
   assign fifo_empty = ~next;
   assign empty      = fifo_empty & dout_empty;
   assign full       = SINGLE ? !dout_empty : &fullness;
 
 
 
 
endmodule