URL
https://opencores.org/ocsvn/dp_components/dp_components/trunk
Subversion Repositories dp_components
[/] [dp_components/] [trunk/] [dp_latency_increase.vhd] - Rev 5
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------- -- -- Copyright 2020 -- ASTRON (Netherlands Institute for Radio Astronomy) <http://www.astron.nl/> -- P.O.Box 2, 7990 AA Dwingeloo, The Netherlands -- -- Licensed under the Apache License, Version 2.0 (the "License"); -- you may not use this file except in compliance with the License. -- You may obtain a copy of the License at -- -- http://www.apache.org/licenses/LICENSE-2.0 -- -- Unless required by applicable law or agreed to in writing, software -- distributed under the License is distributed on an "AS IS" BASIS, -- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -- See the License for the specific language governing permissions and -- limitations under the License. -- ------------------------------------------------------------------------------- LIBRARY IEEE, common_pkg_lib, dp_pkg_lib; USE IEEE.std_logic_1164.ALL; USE IEEE.numeric_std.ALL; USE common_pkg_lib.common_pkg.ALL; USE dp_pkg_lib.dp_stream_pkg.ALL; -- Purpose: -- Typically used in dp_latency_adapter. -- Description: -- Increase the output ready latency by g_incr_latency compared to the input -- ready latency g_in_latency. Hence the output latency becomes g_in_latency -- + g_incr_latency. -- Remark: -- . The SOSI data stream signals (i.e. data, empty, channel, err) are passed -- on as wires. -- . The out_sync, out_val, out_sop and out_eop are internally AND with the -- delayed src_in.ready, this is only truely necessary if the input ready -- latency is 0, but it does not harm to do it also when the input ready -- latency > 0. However to easy achieving P&R timing it is better to not have -- unnessary logic in the combinatorial path of out_sync, out_val, out_sop -- and out_eop, therefore the AND with reg_val is only generated when -- g_in_latency=0. ENTITY dp_latency_increase IS GENERIC ( g_in_latency : NATURAL := 0; -- >= 0 g_incr_latency : NATURAL := 2 -- >= 0 ); PORT ( rst : IN STD_LOGIC; clk : IN STD_LOGIC; -- ST sink snk_out : OUT t_dp_siso; snk_in : IN t_dp_sosi; -- ST source src_in : IN t_dp_siso; src_out : OUT t_dp_sosi ); END dp_latency_increase; ARCHITECTURE rtl OF dp_latency_increase IS CONSTANT c_out_latency : NATURAL := g_in_latency + g_incr_latency; SIGNAL reg_ready : STD_LOGIC_VECTOR(c_out_latency DOWNTO 0); SIGNAL reg_val : STD_LOGIC; SIGNAL i_snk_out : t_dp_siso := c_dp_siso_rdy; BEGIN -- Use i_snk_out with defaults to force unused snk_out bits and fields to '0' snk_out <= i_snk_out; -- Support wires only for g_incr_latency=0 no_latency : IF g_incr_latency=0 GENERATE i_snk_out <= src_in; -- SISO src_out <= snk_in; -- SOSI END GENERATE no_latency; gen_latency : IF g_incr_latency>0 GENERATE -- SISO reg_ready(0) <= src_in.ready; -- use reg_ready(0) to combinatorially store src_in.ready p_clk : PROCESS(rst, clk) BEGIN IF rst='1' THEN reg_ready(c_out_latency DOWNTO 1) <= (OTHERS=>'0'); ELSIF rising_edge(clk) THEN reg_ready(c_out_latency DOWNTO 1) <= reg_ready(c_out_latency-1 DOWNTO 0); END IF; END PROCESS; i_snk_out.xon <= src_in.xon; -- Pass on frame level flow control i_snk_out.ready <= reg_ready(g_incr_latency); -- Adjust ready latency -- SOSI gen_out : IF g_in_latency/=0 GENERATE src_out <= snk_in; END GENERATE; gen_zero_out : IF g_in_latency=0 GENERATE reg_val <= reg_ready(c_out_latency); p_src_out : PROCESS(snk_in, reg_val) BEGIN src_out <= snk_in; src_out.sync <= snk_in.sync AND reg_val; src_out.valid <= snk_in.valid AND reg_val; src_out.sop <= snk_in.sop AND reg_val; src_out.eop <= snk_in.eop AND reg_val; END PROCESS; END GENERATE; END GENERATE gen_latency; END rtl;
Go to most recent revision | Compare with Previous | Blame | View Log