Subversion Repositories ecg

`timescale 1ns / 1ps
`include "../rtl/inc.v"
 
module test_point_add;
 
	// Inputs
	reg clk;
	reg reset;
	reg [`WIDTH:0] x1, y1, x2, y2;
	reg zero1;
	reg zero2;
 
	// Outputs
	wire done;
	wire zero3;
    wire [`WIDTH:0] x3, y3;
 
    // Const
    reg [`WIDTH:0] p1x, p1y, np1y, p2x, p2y, np2y;
 
	// Instantiate the Unit Under Test (UUT)
	point_add uut (
		.clk(clk), 
		.reset(reset), 
		.x1(x1), 
		.y1(y1), 
		.zero1(zero1), 
		.x2(x2), 
		.y2(y2), 
		.zero2(zero2), 
		.done(done), 
		.x3(x3), 
		.y3(y3), 
		.zero3(zero3)
	);
 
	initial begin
		// Initialize Inputs
		clk = 0;
		reset = 0;
		x1 = 0;
		y1 = 0;
		zero1 = 0;
		x2 = 0;
		y2 = 0;
		zero2 = 0;
 
		// Wait 100 ns for global reset to finish
		#100;
 
		// Add stimulus here
        p1x=194'h154594219a60a610649861a602548666509898492a8049;
        p1y=194'h9a5a89a26aa5a1189680a6a64080a519a5054a11a9208094;
        np1y=194'h65a54651955a52246940595980405a265a0a852256104068;
        p2x=194'h109489806019280a602169554246868a518a6102854294968;
        p2y=194'h94995581208995898a04995a50901a6a60421902a21a966a;
        np2y=194'h6866aa4210466a46450866a5a06025959081260151256995;
 
        // Two points are both inf points
        x1 = p1x; y1 = p1y; zero1 = 1;
        x2 = p2x; y2 = p2y; zero2 = 1;
        go;
 
        #5 if(zero3 !== 1) begin $display("E"); $finish; end
 
        // One point is the inf point, the other is not. test case 1
        x1 = p1x; y1 = p1y; zero1 = 0;
        x2 = p2x; y2 = p2y; zero2 = 1;
        go;
 
        #5 if(zero3 !== 0 || x3 !== p1x || y3 !== p1y) begin $display("E"); $finish; end
 
        // One point is the inf point, the other is not. test case 2
        x1 = p1x; y1 = p1y; zero1 = 1;
        x2 = p2x; y2 = p2y; zero2 = 0;
        go;
 
        #5 if(zero3 !== 0 || x3 !== p2x || y3 !== p2y) begin $display("E"); $finish; end
 
        // If P1==-P2, then P3==the inf point. test case 1
        x1 = p1x; y1 = p1y; zero1 = 0;
        x2 = p1x; y2 = np1y; zero2 = 0;
        go;
 
        #5 if(zero3 !== 1) begin $display("E"); $finish; end
 
        // If P1==-P2, then P3==the inf point. test case 2
        x1 = p2x; y1 = p2y; zero1 = 0;
        x2 = p2x; y2 = np2y; zero2 = 0;
        go;
 
        #5 if(zero3 !== 1) begin $display("E"); $finish; end
 
        // If P1==P2. test case 1
        x1 = p1x; y1 = p1y; zero1 = 0;
        x2 = p1x; y2 = p1y; zero2 = 0;
        go;
 
        #5 if(zero3 !== 0 ||
              x3 !== 194'h51a80aa6548495816a6015424a209489998160946485920a ||
              y3 !== 194'h18828584561659888a26269240125594996068145915145
              ) begin $display("E"); $finish; end
 
        // If P1==P2. test case 2
        x1 = p2x; y1 = p2y; zero1 = 0;
        x2 = p2x; y2 = p2y; zero2 = 0;
        go;
 
        #5 if(zero3 !== 0 ||
              x3 !== 194'h2805051564005642629524a84a6159a605024615a90a62042 ||
              y3 !== 194'h2502568a5aa504152460984aa699616901895100a595862a8
              ) begin $display("E"); $finish; end
 
        // If P1==P2. test case 3
        x1 = 194'h126569286a9860859046680265109015266416aa984082610;
        y1 = 194'h2a41880890628944a6844a269258216041061196854181160;
        zero1 = 0;
        x2 = x1; y2 = y1; zero2 = 0;
        go;
 
        #5 if(zero3 !== 0 ||
              x3 !== 194'h68060682a5016661a990165691662666126691485920a940 ||
              y3 !== 194'h1a428568aa082410a482244a642905a015582a945860a8898
              ) begin $display("E"); $finish; end
 
        // If P1 != +- P2, test case 1
        x1 = p1x; y1 = p1y; zero1 = 0;
        x2 = p2x; y2 = p2y; zero2 = 0;
        go;
 
        #5 if(zero3 !== 0 ||
              x3 !== 194'ha629964882665246a929a19808a94825948aa499250110a ||
              y3 !== 194'h920546a8540695a10010a95485a848684a51a864656a82
              ) begin $display("E"); $finish; end
 
        // If P1 != +- P2, test case 2
        x1 = 194'h2405a1946a466242911520254a852988898292a4069969259;
        y1 = 194'ha4568a88466646a4a86925162822a6621aa88aa85916089a;
        zero1 = 0;
        x2 = 194'h10545a2861a44529a24458448958295561a012412846a9259;
        y2 = 194'h2066580628a590a248451a6994956a142a42a5a010840229a;
        zero2 = 0;
        go;
 
        #5 if(zero3 !== 0 ||
              x3 !== 194'h5820222101a8668a69a4492258246242545104498588a4a8 ||
              y3 !== 194'h9892492664444861200a582a998010901105a90556429005
              ) begin $display("E"); $finish; end
 
        // good work, buddy
        $display("nice!");
        $finish;
	end
 
	always #5 clk = ~clk;
 
	task go;
      begin
    	@ (negedge clk); reset = 1; @ (negedge clk); reset = 0;
        @ (posedge done);
      end
	endtask
endmodule