URL
https://opencores.org/ocsvn/eco32/eco32/trunk
Subversion Repositories eco32
[/] [eco32/] [tags/] [eco32-0.25/] [fpga/] [src/] [cpu/] [cpu.v] - Rev 75
Go to most recent revision | Compare with Previous | Blame | View Log
// // cpu.v -- the ECO32 CPU // module cpu(clk, reset, bus_en, bus_wr, bus_size, bus_addr, bus_data_in, bus_data_out, bus_wt, irq); input clk; // system clock input reset; // system reset output bus_en; // bus enable output bus_wr; // bus write output [1:0] bus_size; // 00: byte, 01: halfword, 10: word output [31:0] bus_addr; // bus address input [31:0] bus_data_in; // bus data input, for reads output [31:0] bus_data_out; // bus data output, for writes input bus_wt; // bus wait input [15:0] irq; // interrupt requests // program counter wire [31:0] pc; // program counter wire pc_we; // pc write enable wire [2:0] pc_src; // pc source selector wire [31:0] pc_next; // value written into pc // bus & mmu wire [31:0] mar; // memory address register wire mar_we; // mar write enable wire ma_src; // memory address source selector wire [2:0] mmu_fnc; // mmu function wire [31:0] virt_addr; // virtual address wire [31:0] phys_addr; // physical address wire [31:0] mdor; // memory data out register wire mdor_we; // mdor write enable wire [31:0] mdir; // memory data in register wire mdir_we; // mdir write enable wire mdir_sx; // mdir sign-extend // instruction register & decoder wire ir_we; // ir write enable wire [5:0] opcode; // opcode part of ir wire [4:0] reg1; // register 1 part of ir wire [4:0] reg2; // register 2 part of ir wire [4:0] reg3; // register 3 part of ir wire [31:0] sx16; // sign-extended 16-bit immediate wire [31:0] zx16; // zero-extended 16-bit immediate wire [31:0] hi16; // high 16-bit immediate wire [31:0] sx16s2; // sign-extended 16-bit immediate << 2 wire [31:0] sx26s2; // sign-extended 26-bit immediate << 2 // register file wire [4:0] reg_a1; // register address 1 wire [31:0] reg_do1; // register data out 1 wire [1:0] reg_src2; // register source 2 selector wire [4:0] reg_a2; // register address 2 wire [31:0] reg_do2; // register data out 2 wire reg_we2; // register write enable 2 wire reg_we2_prot; // register write enable 2, // protected against writes with a2 = 0 wire [2:0] reg_di2_src; // register data in 2 source selector wire [31:0] reg_di2; // register data in 2 // alu, shift, and muldiv units wire alu_src1; // alu source 1 selector wire [31:0] alu_op1; // alu operand 1 wire [2:0] alu_src2; // alu source 2 selector wire [31:0] alu_op2; // alu operand 2 wire [2:0] alu_fnc; // alu function wire [31:0] alu_res; // alu result wire alu_equ; // alu operand 1 = operand 2 wire alu_ult; // alu operand 1 < operand 2 (unsigned) wire alu_slt; // alu operand 1 < operand 2 (signed) wire [1:0] shift_fnc; // shift function wire [31:0] shift_res; // shift result wire [2:0] muldiv_fnc; // muldiv function wire muldiv_start; // muldiv should start wire muldiv_done; // muldiv has finished wire muldiv_error; // muldiv detected division by zero wire [31:0] muldiv_res; // muldiv result // special registers wire [1:0] sreg_num; // special register number wire sreg_we; // special register write enable wire [31:0] sreg_di; // special register data in wire [31:0] sreg_do; // special register data out wire [31:0] psw; // special register 0 (psw) contents wire psw_we; // psw write enable wire [31:0] psw_new; // new psw contents wire [31:0] tlb_index; // special register 1 (tlb index) contents wire tlb_index_we; // tlb index write enable wire [31:0] tlb_index_new; // new tlb index contents wire [31:0] tlb_entry_hi; // special register 2 (tlb entry hi) contents wire tlb_entry_hi_we; // tlb entry hi write enable wire [31:0] tlb_entry_hi_new; // new tlb entry hi contents wire [31:0] tlb_entry_lo; // special register 3 (tlb entry lo) contents wire tlb_entry_lo_we; // tlb entry lo write enable wire [31:0] tlb_entry_lo_new; // new tlb entry lo contents // mmu & tlb wire tlb_kmissed; // page not found in tlb, MSB of addr is 1 wire tlb_umissed; // page not found in tlb, MSB of addr is 0 wire tlb_invalid; // tlb entry is invalid wire tlb_wrtprot; // frame is write-protected //------------------------------------------------------------ // program counter assign pc_next = (pc_src == 3'b000) ? alu_res : (pc_src == 3'b001) ? 32'hE0000000 : (pc_src == 3'b010) ? 32'hE0000004 : (pc_src == 3'b011) ? 32'hC0000004 : (pc_src == 3'b100) ? 32'hE0000008 : (pc_src == 3'b101) ? 32'hC0000008 : 32'hxxxxxxxx; pc pc1(clk, pc_we, pc_next, pc); // bus & mmu mar mar1(clk, mar_we, alu_res, mar); assign virt_addr = (ma_src == 0) ? pc : mar; mmu mmu1(clk, reset, mmu_fnc, virt_addr, phys_addr, tlb_index, tlb_index_new, tlb_entry_hi, tlb_entry_hi_new, tlb_entry_lo, tlb_entry_lo_new, tlb_kmissed, tlb_umissed, tlb_invalid, tlb_wrtprot); assign bus_addr = phys_addr; mdor mdor1(clk, mdor_we, reg_do2, mdor); assign bus_data_out = mdor; mdir mdir1(clk, mdir_we, bus_data_in, bus_size, mdir_sx, mdir); // instruction register & decoder ir ir1(clk, ir_we, bus_data_in, opcode, reg1, reg2, reg3, sx16, zx16, hi16, sx16s2, sx26s2); // register file assign reg_a1 = reg1; assign reg_a2 = (reg_src2 == 2'b00) ? reg2 : (reg_src2 == 2'b01) ? reg3 : (reg_src2 == 2'b10) ? 5'b11111 : (reg_src2 == 2'b11) ? 5'b11110 : 5'bxxxxx; assign reg_we2_prot = reg_we2 & (| reg_a2[4:0]); assign reg_di2 = (reg_di2_src == 3'b000) ? alu_res : (reg_di2_src == 3'b001) ? shift_res : (reg_di2_src == 3'b010) ? muldiv_res : (reg_di2_src == 3'b011) ? mdir : (reg_di2_src == 3'b100) ? sreg_do : 32'hxxxxxxxx; regs regs1(clk, reg_a1, reg_do1, reg_a2, reg_do2, reg_we2_prot, reg_di2); // alu, shift, and muldiv units assign alu_op1 = (alu_src1 == 0) ? pc : reg_do1; assign alu_op2 = (alu_src2 == 3'b000) ? 32'h00000004 : (alu_src2 == 3'b001) ? reg_do2 : (alu_src2 == 3'b010) ? sx16 : (alu_src2 == 3'b011) ? zx16 : (alu_src2 == 3'b100) ? hi16 : (alu_src2 == 3'b101) ? sx16s2 : (alu_src2 == 3'b110) ? sx26s2 : 32'hxxxxxxxx; alu alu1(alu_op1, alu_op2, alu_fnc, alu_res, alu_equ, alu_ult, alu_slt); shift shift1(clk, alu_op1, alu_op2[4:0], shift_fnc, shift_res); muldiv muldiv1(clk, alu_op1, alu_op2, muldiv_fnc, muldiv_start, muldiv_done, muldiv_error, muldiv_res); // special registers assign sreg_num = zx16[1:0]; assign sreg_di = reg_do2; sregs sregs1(clk, reset, sreg_num, sreg_we, sreg_di, sreg_do, psw, psw_we, psw_new, tlb_index, tlb_index_we, tlb_index_new, tlb_entry_hi, tlb_entry_hi_we, tlb_entry_hi_new, tlb_entry_lo, tlb_entry_lo_we, tlb_entry_lo_new); // ctrl ctrl ctrl1(clk, reset, opcode, alu_equ, alu_ult, alu_slt, bus_wt, bus_en, bus_wr, bus_size, pc_src, pc_we, mar_we, ma_src, mmu_fnc, mdor_we, mdir_we, mdir_sx, ir_we, reg_src2, reg_di2_src, reg_we2, alu_src1, alu_src2, alu_fnc, shift_fnc, muldiv_fnc, muldiv_start, muldiv_done, muldiv_error, sreg_we, irq, psw, psw_we, psw_new, virt_addr[31], virt_addr[1], virt_addr[0], tlb_kmissed, tlb_umissed, tlb_invalid, tlb_wrtprot, tlb_index_we, tlb_entry_hi_we, tlb_entry_lo_we); endmodule //-------------------------------------------------------------- // ctrl -- the finite state machine within the CPU //-------------------------------------------------------------- module ctrl(clk, reset, opcode, alu_equ, alu_ult, alu_slt, bus_wt, bus_en, bus_wr, bus_size, pc_src, pc_we, mar_we, ma_src, mmu_fnc, mdor_we, mdir_we, mdir_sx, ir_we, reg_src2, reg_di2_src, reg_we2, alu_src1, alu_src2, alu_fnc, shift_fnc, muldiv_fnc, muldiv_start, muldiv_done, muldiv_error, sreg_we, irq, psw, psw_we, psw_new, va_31, va_1, va_0, tlb_kmissed, tlb_umissed, tlb_invalid, tlb_wrtprot, tlb_index_we, tlb_entry_hi_we, tlb_entry_lo_we); input clk; input reset; input [5:0] opcode; input alu_equ; input alu_ult; input alu_slt; input bus_wt; output reg bus_en; output reg bus_wr; output reg [1:0] bus_size; output reg [2:0] pc_src; output reg pc_we; output reg mar_we; output reg ma_src; output reg [2:0] mmu_fnc; output reg mdor_we; output reg mdir_we; output reg mdir_sx; output reg ir_we; output reg [1:0] reg_src2; output reg [2:0] reg_di2_src; output reg reg_we2; output reg alu_src1; output reg [2:0] alu_src2; output reg [2:0] alu_fnc; output reg [1:0] shift_fnc; output reg [2:0] muldiv_fnc; output reg muldiv_start; input muldiv_done; input muldiv_error; output reg sreg_we; input [15:0] irq; input [31:0] psw; output reg psw_we; output reg [31:0] psw_new; input va_31, va_1, va_0; input tlb_kmissed; input tlb_umissed; input tlb_invalid; input tlb_wrtprot; output reg tlb_index_we; output reg tlb_entry_hi_we; output reg tlb_entry_lo_we; wire type_rrr; // instr type is RRR wire type_rrs; // instr type is RRS wire type_rrh; // instr type is RRH wire type_rhh; // instr type is RHH wire type_rrb; // instr type is RRB wire type_j; // instr type is J wire type_jr; // instr type is JR wire type_link; // instr saves PC+4 in $31 wire type_ld; // instr loads data wire type_st; // instr stores data wire type_ldst; // instr loads or stores data wire [1:0] ldst_size; // load/store transfer size wire type_shift; // instr uses the shift unit wire type_muldiv; // instr uses the muldiv unit wire type_fast; // instr is not shift or muldiv wire type_mvfs; // instr is mvfs wire type_mvts; // instr is mvts wire type_rfx; // instr is rfx wire type_trap; // instr is trap wire type_tb; // instr is a TLB instr reg [4:0] state; // cpu internal state // 0: reset // 1: fetch instr (addr xlat) // 2: decode instr // increment pc by 4 // possibly store pc+4 in $31 // 3: execute RRR-type instr // 4: execute RRS-type instr // 5: execute RRH-type instr // 6: execute RHH-type instr // 7: execute RRB-type instr (1) // 8: execute RRB-type instr (2) // 9: execute J-type instr // 10: execute JR-type instr // 11: execute LDST-type instr (1) // 12: execute LD-type instr (addr xlat) // 13: execute LD-type instr (3) // 14: execute ST-type instr (addr xlat) // 15: interrupt // 16: extra state for RRR shift instr // 17: extra state for RRH shift instr // 18: extra state for RRR muldiv instr // 19: extra state for RRS muldiv instr // 20: extra state for RRH muldiv instr // 21: execute mvfs instr // 22: execute mvts instr // 23: execute rfx instr // 24: irq_trigger check for mvts and rfx // 25: exception (locus is PC-4) // 26: exception (locus is PC) // 27: execute TLB instr // 28: fetch instr (bus cycle) // 29: execute LD-type instr (bus cycle) // 30: execute ST-type instr (bus cycle) // all other: unused reg branch; // take the branch iff true wire [15:0] irq_pending; // the vector of pending unmasked irqs wire irq_trigger; // true iff any pending irq is present // and interrupts are globally enabled reg [3:0] irq_priority; // highest priority of pending interrupts reg [3:0] exc_priority; // exception, when entering state 25 or 26 reg [7:0] bus_count; // counter to detect bus timeout wire bus_timeout; // bus timeout detected wire exc_prv_addr; // privileged address exception detected wire exc_ill_addr; // illegal address exception detected wire exc_tlb_but_wrtprot; // any tlb exception but write protection wire exc_tlb_any; // any tlb exception //------------------------------------------------------------ // decode instr type assign type_rrr = ((opcode == 6'h00) || (opcode == 6'h02) || (opcode == 6'h04) || (opcode == 6'h06) || (opcode == 6'h08) || (opcode == 6'h0A) || (opcode == 6'h0C) || (opcode == 6'h0E) || (opcode == 6'h10) || (opcode == 6'h12) || (opcode == 6'h14) || (opcode == 6'h16) || (opcode == 6'h18) || (opcode == 6'h1A) || (opcode == 6'h1C)) ? 1 : 0; assign type_rrs = ((opcode == 6'h01) || (opcode == 6'h03) || (opcode == 6'h05) || (opcode == 6'h09) || (opcode == 6'h0D)) ? 1 : 0; assign type_rrh = ((opcode == 6'h07) || (opcode == 6'h0B) || (opcode == 6'h0F) || (opcode == 6'h11) || (opcode == 6'h13) || (opcode == 6'h15) || (opcode == 6'h17) || (opcode == 6'h19) || (opcode == 6'h1B) || (opcode == 6'h1D)) ? 1 : 0; assign type_rhh = (opcode == 6'h1F) ? 1 : 0; assign type_rrb = ((opcode == 6'h20) || (opcode == 6'h21) || (opcode == 6'h22) || (opcode == 6'h23) || (opcode == 6'h24) || (opcode == 6'h25) || (opcode == 6'h26) || (opcode == 6'h27) || (opcode == 6'h28) || (opcode == 6'h29)) ? 1 : 0; assign type_j = ((opcode == 6'h2A) || (opcode == 6'h2C)) ? 1 : 0; assign type_jr = ((opcode == 6'h2B) || (opcode == 6'h2D)) ? 1 : 0; assign type_link = ((opcode == 6'h2C) || (opcode == 6'h2D)) ? 1 : 0; assign type_ld = ((opcode == 6'h30) || (opcode == 6'h31) || (opcode == 6'h32) || (opcode == 6'h33) || (opcode == 6'h34)) ? 1 : 0; assign type_st = ((opcode == 6'h35) || (opcode == 6'h36) || (opcode == 6'h37)) ? 1 : 0; assign type_ldst = type_ld | type_st; assign ldst_size = ((opcode == 6'h30) || (opcode == 6'h35)) ? 2'b10 : ((opcode == 6'h31) || (opcode == 6'h32) || (opcode == 6'h36)) ? 2'b01 : ((opcode == 6'h33) || (opcode == 6'h34) || (opcode == 6'h37)) ? 2'b00 : 2'bxx; assign type_shift = ((opcode == 6'h18) || (opcode == 6'h19) || (opcode == 6'h1A) || (opcode == 6'h1B) || (opcode == 6'h1C) || (opcode == 6'h1D)) ? 1 : 0; assign type_muldiv = ((opcode == 6'h04) || (opcode == 6'h05) || (opcode == 6'h06) || (opcode == 6'h07) || (opcode == 6'h08) || (opcode == 6'h09) || (opcode == 6'h0A) || (opcode == 6'h0B) || (opcode == 6'h0C) || (opcode == 6'h0D) || (opcode == 6'h0E) || (opcode == 6'h0F)) ? 1 : 0; assign type_fast = ~(type_shift | type_muldiv); assign type_mvfs = (opcode == 6'h38) ? 1 : 0; assign type_mvts = (opcode == 6'h39) ? 1 : 0; assign type_rfx = (opcode == 6'h2F) ? 1 : 0; assign type_trap = (opcode == 6'h2E) ? 1 : 0; assign type_tb = ((opcode == 6'h3A) || (opcode == 6'h3B) || (opcode == 6'h3C) || (opcode == 6'h3D)) ? 1 : 0; // state machine always @(posedge clk) begin if (reset == 1) begin state <= 0; end else begin case (state) 5'd0: // reset begin state <= 5'd1; end 5'd1: // fetch instr (addr xlat) begin if (exc_prv_addr) begin state <= 26; exc_priority <= 4'd9; end else if (exc_ill_addr) begin state <= 26; exc_priority <= 4'd8; end else begin state <= 5'd28; end end 5'd2: // decode instr // increment pc by 4 // possibly store pc+4 in $31 begin if (type_rrr) begin // RRR-type instruction state <= 5'd3; end else if (type_rrs) begin // RRS-type instruction state <= 5'd4; end else if (type_rrh) begin // RRH-type instruction state <= 5'd5; end else if (type_rhh) begin // RHH-type instruction state <= 5'd6; end else if (type_rrb) begin // RRB-type instr state <= 5'd7; end else if (type_j) begin // J-type instr state <= 5'd9; end else if (type_jr) begin // JR-type instr state <= 5'd10; end else if (type_ldst) begin // LDST-type instr state <= 5'd11; end else if (type_mvfs) begin // mvfs instr state <= 5'd21; end else if (type_mvts) begin // mvts instr if (psw[26] == 1) begin state <= 5'd25; exc_priority <= 4'd2; end else begin state <= 5'd22; end end else if (type_rfx) begin // rfx instr if (psw[26] == 1) begin state <= 5'd25; exc_priority <= 4'd2; end else begin state <= 5'd23; end end else if (type_trap) begin // trap instr state <= 5'd25; exc_priority <= 4'd4; end else if (type_tb) begin // TLB instr if (psw[26] == 1) begin state <= 5'd25; exc_priority <= 4'd2; end else begin state <= 5'd27; end end else begin // illegal instruction state <= 5'd25; exc_priority <= 4'd1; end end 5'd3: // execute RRR-type instr begin if (type_muldiv) begin state <= 5'd18; end else if (type_shift) begin state <= 5'd16; end else begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end end 5'd4: // execute RRS-type instr begin if (type_muldiv) begin state <= 5'd19; end else begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end end 5'd5: // execute RRH-type instr begin if (type_muldiv) begin state <= 5'd20; end else if (type_shift) begin state <= 5'd17; end else begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end end 5'd6: // execute RHH-type instr begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end 5'd7: // execute RRB-type instr (1) begin if (branch) begin state <= 5'd8; end else begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end end 5'd8: // execute RRB-type instr (2) begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end 5'd9: // execute J-type instr begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end 5'd10: // execute JR-type instr begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end 5'd11: // execute LDST-type instr (1) begin if (type_ld) begin state <= 5'd12; end else begin state <= 5'd14; end end 5'd12: // execute LD-type instr (addr xlat) begin if (exc_prv_addr) begin state <= 25; exc_priority <= 4'd9; end else if (exc_ill_addr) begin state <= 25; exc_priority <= 4'd8; end else begin state <= 5'd29; end end 5'd13: // execute LD-type instr (3) begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end 5'd14: // execute ST-type instr (addr xlat) begin if (exc_prv_addr) begin state <= 25; exc_priority <= 4'd9; end else if (exc_ill_addr) begin state <= 25; exc_priority <= 4'd8; end else begin state <= 5'd30; end end 5'd15: // interrupt begin state <= 5'd1; end 5'd16: // extra state for RRR shift instr begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end 5'd17: // extra state for RRH shift instr begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end 5'd18: // extra state for RRR muldiv instr begin if (muldiv_done) begin if (muldiv_error) begin state <= 5'd25; exc_priority <= 4'd3; end else if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end else begin state <= 5'd18; end end 5'd19: // extra state for RRS muldiv instr begin if (muldiv_done) begin if (muldiv_error) begin state <= 5'd25; exc_priority <= 4'd3; end else if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end else begin state <= 5'd19; end end 5'd20: // extra state for RRH muldiv instr begin if (muldiv_done) begin if (muldiv_error) begin state <= 5'd25; exc_priority <= 4'd3; end else if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end else begin state <= 5'd20; end end 5'd21: // execute mvfs instr begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end 5'd22: // execute mvts instr begin state <= 5'd24; end 5'd23: // execute rfx instr begin state <= 5'd24; end 5'd24: // irq_trigger check for mvts and rfx begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end 5'd25: // exception (locus is PC-4) begin state <= 5'd1; end 5'd26: // exception (locus is PC) begin state <= 5'd1; end 5'd27: // execute TLB instr begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end 5'd28: // fetch instr (bus cycle) begin if (tlb_kmissed == 1 || tlb_umissed == 1) begin state <= 5'd26; exc_priority <= 4'd5; end else if (tlb_invalid == 1) begin state <= 5'd26; exc_priority <= 4'd7; end else if (bus_wt == 1) begin if (bus_timeout == 1) begin state <= 5'd26; exc_priority <= 4'd0; end else begin state <= 5'd28; end end else begin state <= 5'd2; end end 5'd29: // execute LD-type instr (bus cycle) begin if (tlb_kmissed == 1 || tlb_umissed == 1) begin state <= 5'd25; exc_priority <= 4'd5; end else if (tlb_invalid == 1) begin state <= 5'd25; exc_priority <= 4'd7; end else if (bus_wt == 1) begin if (bus_timeout == 1) begin state <= 5'd25; exc_priority <= 4'd0; end else begin state <= 5'd29; end end else begin state <= 5'd13; end end 5'd30: // execute ST-type instr (bus cycle) begin if (tlb_kmissed == 1 || tlb_umissed == 1) begin state <= 5'd25; exc_priority <= 4'd5; end else if (tlb_invalid == 1) begin state <= 5'd25; exc_priority <= 4'd7; end else if (tlb_wrtprot == 1) begin state <= 5'd25; exc_priority <= 4'd6; end else if (bus_wt == 1) begin if (bus_timeout == 1) begin state <= 5'd25; exc_priority <= 4'd0; end else begin state <= 5'd30; end end else begin if (irq_trigger) begin state <= 5'd15; end else begin state <= 5'd1; end end end default: // all other states: unused begin state <= 5'd0; end endcase end end // bus timeout detector assign bus_timeout = (bus_count == 8'h00) ? 1 : 0; always @(posedge clk) begin if (bus_en == 1 && bus_wt == 1) begin // bus is waiting bus_count <= bus_count - 1; end else begin // bus is not waiting bus_count <= 8'hFF; end end // output logic always @(*) begin case (state) 5'd0: // reset begin pc_src = 3'b001; pc_we = 1'b1; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd1: // fetch instr (addr xlat) begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'b0; mmu_fnc = (exc_prv_addr | exc_ill_addr) ? 3'b000 : 3'b001; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'b10; // enable illegal address detection mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd2: // decode instr // increment pc by 4 // possibly store pc+4 in $31 begin pc_src = 3'b000; pc_we = 1'b1; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = (type_link == 1) ? 2'b10 : (type_rfx == 1) ? 2'b11 : 2'b00; reg_di2_src = (type_link == 1) ? 3'b000 : 3'bxxx; reg_we2 = (type_link == 1) ? 1'b1 : 1'b0; alu_src1 = 1'b0; alu_src2 = 3'b000; alu_fnc = 3'b000; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd3: // execute RRR-type instr begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b01; reg_di2_src = 3'b000; reg_we2 = type_fast; alu_src1 = 1'b1; alu_src2 = 3'b001; alu_fnc = { opcode[4], opcode[2], opcode[1] }; shift_fnc = { opcode[2], opcode[1] }; muldiv_fnc = { opcode[3], opcode[2], opcode[1] }; muldiv_start = type_muldiv; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd4: // execute RRS-type instr begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b00; reg_di2_src = 3'b000; reg_we2 = type_fast; alu_src1 = 1'b1; alu_src2 = 3'b010; alu_fnc = { opcode[4], opcode[2], opcode[1] }; shift_fnc = 2'bxx; muldiv_fnc = { opcode[3], opcode[2], opcode[1] }; muldiv_start = type_muldiv; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd5: // execute RRH-type instr begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b00; reg_di2_src = 3'b000; reg_we2 = type_fast; alu_src1 = 1'b1; alu_src2 = 3'b011; alu_fnc = { opcode[4], opcode[2], opcode[1] }; shift_fnc = { opcode[2], opcode[1] }; muldiv_fnc = { opcode[3], opcode[2], opcode[1] }; muldiv_start = type_muldiv; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd6: // execute RHH-type instr begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b00; reg_di2_src = 3'b000; reg_we2 = 1'b1; alu_src1 = 1'bx; alu_src2 = 3'b100; alu_fnc = 3'b011; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd7: // execute RRB-type instr (1) begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'b1; alu_src2 = 3'b001; alu_fnc = 3'b001; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd8: // execute RRB-type instr (2) begin pc_src = 3'b000; pc_we = 1'b1; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'b0; alu_src2 = 3'b101; alu_fnc = 3'b000; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd9: // execute J-type instr begin pc_src = 3'b000; pc_we = 1'b1; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'b0; alu_src2 = 3'b110; alu_fnc = 3'b000; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd10: // execute JR-type instr begin pc_src = 3'b000; pc_we = 1'b1; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'b1; alu_src2 = 3'bxxx; alu_fnc = 3'b010; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd11: // execute LDST-type instr (1) begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b1; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b1; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'b1; alu_src2 = 3'b010; alu_fnc = 3'b000; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd12: // execute LD-type instr (addr xlat) begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'b1; mmu_fnc = (exc_prv_addr | exc_ill_addr) ? 3'b000 : 3'b001; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = ldst_size; // enable illegal address detection mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd13: // execute LD-type instr (3) begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = ldst_size; mdir_we = 1'b0; mdir_sx = opcode[0]; ir_we = 1'b0; reg_src2 = 2'b00; reg_di2_src = 3'b011; reg_we2 = 1'b1; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd14: // execute ST-type instr (addr xlat) begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'b1; mmu_fnc = (exc_prv_addr | exc_ill_addr) ? 3'b000 : 3'b001; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = ldst_size; // enable illegal address detection mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd15: // interrupt begin pc_src = (psw[27] == 0) ? 3'b010 : 3'b011; pc_we = 1'b1; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b11; reg_di2_src = 3'b000; reg_we2 = 1'b1; alu_src1 = 1'b0; alu_src2 = 3'bxxx; alu_fnc = 3'b010; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b1; psw_new = { psw[31:28], psw[27], 1'b0, psw[26], psw[25], 1'b0, psw[23], psw[22], 1'b0, irq_priority, psw[15:0] }; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd16: // extra state for RRR shift instr begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b01; reg_di2_src = 3'b001; reg_we2 = 1'b1; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd17: // extra state for RRH shift instr begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b00; reg_di2_src = 3'b001; reg_we2 = 1'b1; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd18: // extra state for RRR muldiv instr begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b01; reg_di2_src = 3'b010; reg_we2 = muldiv_done & ~muldiv_error; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd19: // extra state for RRS muldiv instr begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b00; reg_di2_src = 3'b010; reg_we2 = muldiv_done & ~muldiv_error; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd20: // extra state for RRH muldiv instr begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b00; reg_di2_src = 3'b010; reg_we2 = muldiv_done & ~muldiv_error; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd21: // execute mvfs instr begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b00; reg_di2_src = 3'b100; reg_we2 = 1'b1; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd22: // execute mvts instr begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b1; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd23: // execute rfx instr begin pc_src = 3'b000; pc_we = 1'b1; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'bx; alu_src2 = 3'b001; alu_fnc = 3'b011; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b1; psw_new = { psw[31:28], psw[27], psw[25], psw[24], psw[24], psw[22], psw[21], psw[21], psw[20:16], psw[15:0] }; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd24: // irq_trigger check for mvts and rfx begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd25: // exception (locus is PC-4) begin pc_src = (psw[27] != 0) ? ((tlb_umissed != 0) ? 3'b101 : 3'b011) : ((tlb_umissed != 0) ? 3'b100 : 3'b010); pc_we = 1'b1; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b11; reg_di2_src = 3'b000; reg_we2 = 1'b1; alu_src1 = 1'b0; alu_src2 = 3'b000; alu_fnc = 3'b001; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b1; psw_new = { psw[31:28], psw[27], 1'b0, psw[26], psw[25], 1'b0, psw[23], psw[22], 1'b1, exc_priority, psw[15:0] }; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd26: // exception (locus is PC) begin pc_src = (psw[27] != 0) ? ((tlb_umissed != 0) ? 3'b101 : 3'b011) : ((tlb_umissed != 0) ? 3'b100 : 3'b010); pc_we = 1'b1; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'b11; reg_di2_src = 3'b000; reg_we2 = 1'b1; alu_src1 = 1'b0; alu_src2 = 3'bxxx; alu_fnc = 3'b010; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b1; psw_new = { psw[31:28], psw[27], 1'b0, psw[26], psw[25], 1'b0, psw[23], psw[22], 1'b1, exc_priority, psw[15:0] }; tlb_index_we = 1'b0; tlb_entry_hi_we = 1'b0; tlb_entry_lo_we = 1'b0; end 5'd27: // execute TLB instr begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = opcode[2:0]; mdor_we = 1'b0; bus_en = 1'b0; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = (opcode[2:0] == 3'b010) ? 1 : 0; tlb_entry_hi_we = (opcode[2:0] == 3'b100) ? 1 : 0; tlb_entry_lo_we = (opcode[2:0] == 3'b100) ? 1 : 0; end 5'd28: // fetch instr (bus cycle) begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = ~exc_tlb_but_wrtprot; bus_wr = 1'b0; bus_size = 2'b10; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b1; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = exc_tlb_but_wrtprot; tlb_entry_lo_we = 1'b0; end 5'd29: // execute LD-type instr (bus cycle) begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = ~exc_tlb_but_wrtprot; bus_wr = 1'b0; bus_size = ldst_size; mdir_we = 1'b1; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = exc_tlb_but_wrtprot; tlb_entry_lo_we = 1'b0; end 5'd30: // execute ST-type instr (bus cycle) begin pc_src = 3'bxxx; pc_we = 1'b0; mar_we = 1'b0; ma_src = 1'bx; mmu_fnc = 3'b000; mdor_we = 1'b0; bus_en = ~exc_tlb_any; bus_wr = 1'b1; bus_size = ldst_size; mdir_we = 1'b0; mdir_sx = 1'bx; ir_we = 1'b0; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'b0; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'b0; sreg_we = 1'b0; psw_we = 1'b0; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'b0; tlb_entry_hi_we = exc_tlb_any; tlb_entry_lo_we = 1'b0; end default: // all other states: unused begin pc_src = 3'bxxx; pc_we = 1'bx; mar_we = 1'bx; ma_src = 1'bx; mmu_fnc = 3'bxxx; mdor_we = 1'bx; bus_en = 1'bx; bus_wr = 1'bx; bus_size = 2'bxx; mdir_we = 1'bx; mdir_sx = 1'bx; ir_we = 1'bx; reg_src2 = 2'bxx; reg_di2_src = 3'bxxx; reg_we2 = 1'bx; alu_src1 = 1'bx; alu_src2 = 3'bxxx; alu_fnc = 3'bxxx; shift_fnc = 2'bxx; muldiv_fnc = 3'bxxx; muldiv_start = 1'bx; sreg_we = 1'bx; psw_we = 1'bx; psw_new = 32'hxxxxxxxx; tlb_index_we = 1'bx; tlb_entry_hi_we = 1'bx; tlb_entry_lo_we = 1'bx; end endcase end // branch logic always @(*) begin casex ( { opcode[3:0], alu_equ, alu_ult, alu_slt } ) // eq 7'b00000xx: branch = 0; 7'b00001xx: branch = 1; // ne 7'b00010xx: branch = 1; 7'b00011xx: branch = 0; // le 7'b00100x0: branch = 0; 7'b00101xx: branch = 1; 7'b0010xx1: branch = 1; // leu 7'b001100x: branch = 0; 7'b00111xx: branch = 1; 7'b0011x1x: branch = 1; // lt 7'b0100xx0: branch = 0; 7'b0100xx1: branch = 1; // ltu 7'b0101x0x: branch = 0; 7'b0101x1x: branch = 1; // ge 7'b0110xx0: branch = 1; 7'b0110xx1: branch = 0; // geu 7'b0111x0x: branch = 1; 7'b0111x1x: branch = 0; // gt 7'b10000x0: branch = 1; 7'b10001xx: branch = 0; 7'b1000xx1: branch = 0; // gtu 7'b100100x: branch = 1; 7'b10011xx: branch = 0; 7'b1001x1x: branch = 0; // other default: branch = 1'bx; endcase end // interrupts assign irq_pending = irq[15:0] & psw[15:0]; assign irq_trigger = (| irq_pending) & psw[23]; always @(*) begin if ((| irq_pending[15:8]) != 0) begin if ((| irq_pending[15:12]) != 0) begin if ((| irq_pending[15:14]) != 0) begin if (irq_pending[15] != 0) begin irq_priority = 4'd15; end else begin irq_priority = 4'd14; end end else begin if (irq_pending[13] != 0) begin irq_priority = 4'd13; end else begin irq_priority = 4'd12; end end end else begin if ((| irq_pending[11:10]) != 0) begin if (irq_pending[11] != 0) begin irq_priority = 4'd11; end else begin irq_priority = 4'd10; end end else begin if (irq_pending[9] != 0) begin irq_priority = 4'd9; end else begin irq_priority = 4'd8; end end end end else begin if ((| irq_pending[7:4]) != 0) begin if ((| irq_pending[7:6]) != 0) begin if (irq_pending[7] != 0) begin irq_priority = 4'd7; end else begin irq_priority = 4'd6; end end else begin if (irq_pending[5] != 0) begin irq_priority = 4'd5; end else begin irq_priority = 4'd4; end end end else begin if ((| irq_pending[3:2]) != 0) begin if (irq_pending[3] != 0) begin irq_priority = 4'd3; end else begin irq_priority = 4'd2; end end else begin if (irq_pending[1] != 0) begin irq_priority = 4'd1; end else begin irq_priority = 4'd0; end end end end end // exceptions assign exc_prv_addr = psw[26] & va_31; assign exc_ill_addr = (bus_size[0] & va_0) | (bus_size[1] & va_0) | (bus_size[1] & va_1); assign exc_tlb_but_wrtprot = tlb_kmissed | tlb_umissed | tlb_invalid; assign exc_tlb_any = exc_tlb_but_wrtprot | tlb_wrtprot; endmodule //-------------------------------------------------------------- // pc -- the program counter //-------------------------------------------------------------- module pc(clk, pc_we, pc_next, pc); input clk; input pc_we; input [31:0] pc_next; output reg [31:0] pc; always @(posedge clk) begin if (pc_we == 1) begin pc <= pc_next; end end endmodule //-------------------------------------------------------------- // mar -- the memory address register //-------------------------------------------------------------- module mar(clk, mar_we, mar_next, mar); input clk; input mar_we; input [31:0] mar_next; output reg [31:0] mar; always @(posedge clk) begin if (mar_we == 1) begin mar <= mar_next; end end endmodule //-------------------------------------------------------------- // mdor -- the memory data out register //-------------------------------------------------------------- module mdor(clk, mdor_we, mdor_next, mdor); input clk; input mdor_we; input [31:0] mdor_next; output reg [31:0] mdor; always @(posedge clk) begin if (mdor_we == 1) begin mdor <= mdor_next; end end endmodule //-------------------------------------------------------------- // mdir -- the memory data in register //-------------------------------------------------------------- module mdir(clk, mdir_we, mdir_next, size, sx, mdir); input clk; input mdir_we; input [31:0] mdir_next; input [1:0] size; input sx; output reg [31:0] mdir; reg [31:0] data; always @(posedge clk) begin if (mdir_we == 1) begin data <= mdir_next; end end always @(*) begin case ({ size, sx }) 3'b000: begin mdir[31:0] = { 24'h000000, data[7:0] }; end 3'b001: begin if (data[7] == 1) begin mdir[31:0] = { 24'hFFFFFF, data[7:0] }; end else begin mdir[31:0] = { 24'h000000, data[7:0] }; end end 3'b010: begin mdir[31:0] = { 16'h0000, data[15:0] }; end 3'b011: begin if (data[15] == 1) begin mdir[31:0] = { 16'hFFFF, data[15:0] }; end else begin mdir[31:0] = { 16'h0000, data[15:0] }; end end default: begin mdir[31:0] = data[31:0]; end endcase end endmodule //-------------------------------------------------------------- // ir -- the instruction register and decoder //-------------------------------------------------------------- module ir(clk, ir_we, instr, opcode, reg1, reg2, reg3, sx16, zx16, hi16, sx16s2, sx26s2); input clk; input ir_we; input [31:0] instr; output [5:0] opcode; output [4:0] reg1; output [4:0] reg2; output [4:0] reg3; output [31:0] sx16; output [31:0] zx16; output [31:0] hi16; output [31:0] sx16s2; output [31:0] sx26s2; reg [31:0] ir; wire [15:0] copy_sign_16; // 16-bit copy of a 16-bit immediate's sign wire [3:0] copy_sign_26; // 4-bit copy of a 26-bit immediate's sign always @(posedge clk) begin if (ir_we) begin ir <= instr; end end assign opcode[5:0] = ir[31:26]; assign reg1[4:0] = ir[25:21]; assign reg2[4:0] = ir[20:16]; assign reg3[4:0] = ir[15:11]; assign copy_sign_16[15:0] = (ir[15] == 1) ? 16'hFFFF : 16'h0000; assign copy_sign_26[3:0] = (ir[25] == 1) ? 4'hF : 4'h0; assign sx16[31:0] = { copy_sign_16[15:0], ir[15:0] }; assign zx16[31:0] = { 16'h0000, ir[15:0] }; assign hi16[31:0] = { ir[15:0], 16'h0000 }; assign sx16s2[31:0] = { copy_sign_16[13:0], ir[15:0], 2'b00 }; assign sx26s2[31:0] = { copy_sign_26[3:0], ir[25:0], 2'b00 }; endmodule //-------------------------------------------------------------- // regs -- the register file //-------------------------------------------------------------- module regs(clk, rn1, do1, rn2, do2, we2, di2); input clk; input [4:0] rn1; output reg [31:0] do1; input [4:0] rn2; output reg [31:0] do2; input we2; input [31:0] di2; reg [31:0] r[0:31]; always @(posedge clk) begin do1 <= r[rn1]; if (we2 == 0) begin do2 <= r[rn2]; end else begin do2 <= di2; r[rn2] <= di2; end end endmodule //-------------------------------------------------------------- // alu -- the arithmetic/logic unit //-------------------------------------------------------------- module alu(a, b, fnc, res, equ, ult, slt); input [31:0] a; input [31:0] b; input [2:0] fnc; output [31:0] res; output equ; output ult; output slt; wire [32:0] a1; wire [32:0] b1; reg [32:0] res1; assign a1 = { 1'b0, a }; assign b1 = { 1'b0, b }; always @(*) begin case (fnc) 3'b000: res1 = a1 + b1; 3'b001: res1 = a1 - b1; 3'b010: res1 = a1; 3'b011: res1 = b1; 3'b100: res1 = a1 & b1; 3'b101: res1 = a1 | b1; 3'b110: res1 = a1 ^ b1; 3'b111: res1 = a1 ~^ b1; default: res1 = 33'hxxxxxxxx; endcase end assign res = res1[31:0]; assign equ = ~| res1[31:0]; assign ult = res1[32]; assign slt = res1[32] ^ a[31] ^ b[31]; endmodule //-------------------------------------------------------------- // shift -- the shift unit //-------------------------------------------------------------- module shift(clk, data_in, shamt, fnc, data_out); input clk; input [31:0] data_in; input [4:0] shamt; input [1:0] fnc; output reg [31:0] data_out; always @(posedge clk) begin if (fnc == 2'b00) begin // sll data_out <= data_in << shamt; end else if (fnc == 2'b01) begin // slr data_out <= data_in >> shamt; end else if (fnc == 2'b10) begin // sar if (data_in[31] == 1) begin data_out <= ~(32'hFFFFFFFF >> shamt) | (data_in >> shamt); end else begin data_out <= data_in >> shamt; end end else begin data_out <= 32'hxxxxxxxx; end end endmodule //-------------------------------------------------------------- // muldiv -- the multiplier/divide unit //-------------------------------------------------------------- module muldiv(clk, a, b, fnc, start, done, error, res); input clk; input [31:0] a; input [31:0] b; input [2:0] fnc; input start; output reg done; output reg error; output reg [31:0] res; // fnc = 000 op = undefined // 001 undefined // 010 mul // 011 mulu // 100 div // 101 divu // 110 rem // 111 remu reg div; reg rem; reg [5:0] count; reg a_neg; reg b_neg; reg [31:0] b_abs; reg [64:0] q; wire [64:1] s; wire [64:0] d; assign s[64:32] = q[64:32] + { 1'b0, b_abs }; assign s[31: 1] = q[31: 1]; assign d[64:32] = q[64:32] - { 1'b0, b_abs }; assign d[31: 0] = q[31: 0]; always @(posedge clk) begin if (start == 1) begin if (fnc[2] == 1 && (| b[31:0]) == 0) begin // division by zero done <= 1; error <= 1; end else begin // operands are ok done <= 0; error <= 0; end div <= fnc[2]; rem <= fnc[1]; count <= 6'd0; if (fnc[0] == 0 && a[31] == 1) begin // negate first operand a_neg <= 1; if (fnc[2] == 0) begin // initialize q for multiplication q[64:32] <= 33'b0; q[31: 0] <= ~a + 1; end else begin // initialize q for division and remainder q[64:33] <= 32'b0; q[32: 1] <= ~a + 1; q[ 0: 0] <= 1'b0; end end else begin // use first operand as is a_neg <= 0; if (fnc[2] == 0) begin // initialize q for multiplication q[64:32] <= 33'b0; q[31: 0] <= a; end else begin // initialize q for division and remainder q[64:33] <= 32'b0; q[32: 1] <= a; q[ 0: 0] <= 1'b0; end end if (fnc[0] == 0 && b[31] == 1) begin // negate second operand b_neg <= 1; b_abs <= ~b + 1; end else begin // use second operand as is b_neg <= 0; b_abs <= b; end end else begin if (done == 0) begin // algorithm not yet finished if (div == 0) begin // // multiplication // if (count == 6'd32) begin // last step done <= 1; if (a_neg == b_neg) begin res <= q[31:0]; end else begin res <= ~q[31:0] + 1; end end else begin // all other steps count <= count + 1; if (q[0] == 1) begin q <= { 1'b0, s[64:1] }; end else begin q <= { 1'b0, q[64:1] }; end end end else begin // // division and remainder // if (count == 6'd32) begin // last step done <= 1; if (rem == 0) begin // result <= quotient if (a_neg == b_neg) begin res <= q[31:0]; end else begin res <= ~q[31:0] + 1; end end else begin // result <= remainder if (a_neg == 0) begin res <= q[64:33]; end else begin res <= ~q[64:33] + 1; end end end else begin // all other steps count <= count + 1; if (d[64] == 0) begin q <= { d[63:0], 1'b1 }; end else begin q <= { q[63:0], 1'b0 }; end end end end end end endmodule //-------------------------------------------------------------- // sregs -- the special registers //-------------------------------------------------------------- module sregs(clk, reset, rn, we, di, do, psw, psw_we, psw_new, tlb_index, tlb_index_we, tlb_index_new, tlb_entry_hi, tlb_entry_hi_we, tlb_entry_hi_new, tlb_entry_lo, tlb_entry_lo_we, tlb_entry_lo_new); input clk; input reset; input [1:0] rn; input we; input [31:0] di; output [31:0] do; output [31:0] psw; input psw_we; input [31:0] psw_new; output [31:0] tlb_index; input tlb_index_we; input [31:0] tlb_index_new; output [31:0] tlb_entry_hi; input tlb_entry_hi_we; input [31:0] tlb_entry_hi_new; output [31:0] tlb_entry_lo; input tlb_entry_lo_we; input [31:0] tlb_entry_lo_new; // rn = 00 register = PSW // 01 TLB index // 10 TLB entry high // 11 TLB entry low reg [31:0] sr[0:3]; assign do = sr[rn]; assign psw = sr[0]; assign tlb_index = sr[1]; assign tlb_entry_hi = sr[2]; assign tlb_entry_lo = sr[3]; always @(posedge clk) begin if (reset == 1) begin sr[0] <= 32'h00000000; end else begin if (we == 1) begin sr[rn] <= di; end else begin if (psw_we) begin sr[0] <= psw_new; end if (tlb_index_we) begin sr[1] <= tlb_index_new; end if (tlb_entry_hi_we) begin sr[2] <= tlb_entry_hi_new; end if (tlb_entry_lo_we) begin sr[3] <= tlb_entry_lo_new; end end end end endmodule //-------------------------------------------------------------- // mmu -- the memory management unit //-------------------------------------------------------------- module mmu(clk, reset, fnc, virt, phys, tlb_index, tlb_index_new, tlb_entry_hi, tlb_entry_hi_new, tlb_entry_lo, tlb_entry_lo_new, tlb_kmissed, tlb_umissed, tlb_invalid, tlb_wrtprot); input clk; input reset; input [2:0] fnc; input [31:0] virt; output [31:0] phys; input [31:0] tlb_index; output [31:0] tlb_index_new; input [31:0] tlb_entry_hi; output [31:0] tlb_entry_hi_new; input [31:0] tlb_entry_lo; output [31:0] tlb_entry_lo_new; output tlb_kmissed; output tlb_umissed; output tlb_invalid; output tlb_wrtprot; // fnc = 000 no operation, hold output // 001 map virt to phys address // 010 tbs // 011 tbwr // 100 tbri // 101 tbwi // 110 undefined // 111 undefined wire map; wire tbs; wire tbwr; wire tbri; wire tbwi; reg [19:0] page; reg [11:0] offset; wire [19:0] tlb_page; wire tlb_miss; wire [4:0] tlb_found; wire tlb_enable; wire [19:0] tlb_frame; wire tlb_wbit; wire tlb_vbit; wire [4:0] rw_index; wire [19:0] r_page; wire [19:0] r_frame; wire w_enable; wire [19:0] w_page; wire [19:0] w_frame; wire direct; wire [17:0] frame; reg [4:0] random_index; reg tlb_miss_delayed; // decode function assign map = (fnc == 3'b001) ? 1 : 0; assign tbs = (fnc == 3'b010) ? 1 : 0; assign tbwr = (fnc == 3'b011) ? 1 : 0; assign tbri = (fnc == 3'b100) ? 1 : 0; assign tbwi = (fnc == 3'b101) ? 1 : 0; // latch virtual address always @(posedge clk) begin if (map == 1) begin page <= virt[31:12]; offset <= virt[11:0]; end end // create tlb instance assign tlb_page = (tbs == 1) ? tlb_entry_hi[31:12] : virt[31:12]; assign tlb_enable = map; assign tlb_wbit = tlb_frame[1]; assign tlb_vbit = tlb_frame[0]; assign rw_index = (tbwr == 1) ? random_index : tlb_index[4:0]; assign tlb_index_new = { tlb_miss | tlb_index[31], tlb_index[30:5], tlb_found }; assign tlb_entry_hi_new = { ((tbri == 1) ? r_page : page), tlb_entry_hi[11:0] }; assign tlb_entry_lo_new = { tlb_entry_lo[31:30], r_frame[19:2], tlb_entry_lo[11:2], r_frame[1:0] }; assign w_enable = tbwr | tbwi; assign w_page = tlb_entry_hi[31:12]; assign w_frame = { tlb_entry_lo[29:12], tlb_entry_lo[1:0] }; tlb tlb1(tlb_page, tlb_miss, tlb_found, clk, tlb_enable, tlb_frame, rw_index, r_page, r_frame, w_enable, w_page, w_frame); // construct physical address assign direct = (page[19:18] == 2'b11) ? 1 : 0; assign frame = (direct == 1) ? page[17:0] : tlb_frame[19:2]; assign phys = { 2'b00, frame, offset }; // generate "random" index always @(posedge clk) begin if (reset == 1) begin // the index register is counting down // so we must start at topmost index random_index <= 5'd31; end else begin // decrement index register "randomly" // (whenever there is a mapping operation) // skip "fixed" entries (0..3) if (map == 1) begin if (random_index == 5'd4) begin random_index <= 5'd31; end else begin random_index <= random_index - 1; end end end end // generate TLB exceptions always @(posedge clk) begin if (map == 1) begin tlb_miss_delayed <= tlb_miss; end end assign tlb_kmissed = tlb_miss_delayed & ~direct & page[19]; assign tlb_umissed = tlb_miss_delayed & ~direct & ~page[19]; assign tlb_invalid = ~tlb_vbit & ~direct; assign tlb_wrtprot = ~tlb_wbit & ~direct; endmodule //-------------------------------------------------------------- // tlb -- the translation lookaside buffer //-------------------------------------------------------------- module tlb(page_in, miss, found, clk, enable, frame_out, rw_index, r_page, r_frame, w_enable, w_page, w_frame); input [19:0] page_in; output miss; output [4:0] found; input clk; input enable; output reg [19:0] frame_out; input [4:0] rw_index; output reg [19:0] r_page; output reg [19:0] r_frame; input w_enable; input [19:0] w_page; input [19:0] w_frame; reg [19:0] page[0:31]; reg [19:0] frame[0:31]; wire [19:0] p00, p01, p02, p03; wire [19:0] p04, p05, p06, p07; wire [19:0] p08, p09, p10, p11; wire [19:0] p12, p13, p14, p15; wire [19:0] p16, p17, p18, p19; wire [19:0] p20, p21, p22, p23; wire [19:0] p24, p25, p26, p27; wire [19:0] p28, p29, p30, p31; wire [31:0] match; assign p00 = page[ 0]; assign p01 = page[ 1]; assign p02 = page[ 2]; assign p03 = page[ 3]; assign p04 = page[ 4]; assign p05 = page[ 5]; assign p06 = page[ 6]; assign p07 = page[ 7]; assign p08 = page[ 8]; assign p09 = page[ 9]; assign p10 = page[10]; assign p11 = page[11]; assign p12 = page[12]; assign p13 = page[13]; assign p14 = page[14]; assign p15 = page[15]; assign p16 = page[16]; assign p17 = page[17]; assign p18 = page[18]; assign p19 = page[19]; assign p20 = page[20]; assign p21 = page[21]; assign p22 = page[22]; assign p23 = page[23]; assign p24 = page[24]; assign p25 = page[25]; assign p26 = page[26]; assign p27 = page[27]; assign p28 = page[28]; assign p29 = page[29]; assign p30 = page[30]; assign p31 = page[31]; assign match[ 0] = (page_in == p00) ? 1 : 0; assign match[ 1] = (page_in == p01) ? 1 : 0; assign match[ 2] = (page_in == p02) ? 1 : 0; assign match[ 3] = (page_in == p03) ? 1 : 0; assign match[ 4] = (page_in == p04) ? 1 : 0; assign match[ 5] = (page_in == p05) ? 1 : 0; assign match[ 6] = (page_in == p06) ? 1 : 0; assign match[ 7] = (page_in == p07) ? 1 : 0; assign match[ 8] = (page_in == p08) ? 1 : 0; assign match[ 9] = (page_in == p09) ? 1 : 0; assign match[10] = (page_in == p10) ? 1 : 0; assign match[11] = (page_in == p11) ? 1 : 0; assign match[12] = (page_in == p12) ? 1 : 0; assign match[13] = (page_in == p13) ? 1 : 0; assign match[14] = (page_in == p14) ? 1 : 0; assign match[15] = (page_in == p15) ? 1 : 0; assign match[16] = (page_in == p16) ? 1 : 0; assign match[17] = (page_in == p17) ? 1 : 0; assign match[18] = (page_in == p18) ? 1 : 0; assign match[19] = (page_in == p19) ? 1 : 0; assign match[20] = (page_in == p20) ? 1 : 0; assign match[21] = (page_in == p21) ? 1 : 0; assign match[22] = (page_in == p22) ? 1 : 0; assign match[23] = (page_in == p23) ? 1 : 0; assign match[24] = (page_in == p24) ? 1 : 0; assign match[25] = (page_in == p25) ? 1 : 0; assign match[26] = (page_in == p26) ? 1 : 0; assign match[27] = (page_in == p27) ? 1 : 0; assign match[28] = (page_in == p28) ? 1 : 0; assign match[29] = (page_in == p29) ? 1 : 0; assign match[30] = (page_in == p30) ? 1 : 0; assign match[31] = (page_in == p31) ? 1 : 0; assign miss = ~(| match[31:0]); assign found[0] = match[ 1] | match[ 3] | match[ 5] | match[ 7] | match[ 9] | match[11] | match[13] | match[15] | match[17] | match[19] | match[21] | match[23] | match[25] | match[27] | match[29] | match[31]; assign found[1] = match[ 2] | match[ 3] | match[ 6] | match[ 7] | match[10] | match[11] | match[14] | match[15] | match[18] | match[19] | match[22] | match[23] | match[26] | match[27] | match[30] | match[31]; assign found[2] = match[ 4] | match[ 5] | match[ 6] | match[ 7] | match[12] | match[13] | match[14] | match[15] | match[20] | match[21] | match[22] | match[23] | match[28] | match[29] | match[30] | match[31]; assign found[3] = match[ 8] | match[ 9] | match[10] | match[11] | match[12] | match[13] | match[14] | match[15] | match[24] | match[25] | match[26] | match[27] | match[28] | match[29] | match[30] | match[31]; assign found[4] = match[16] | match[17] | match[18] | match[19] | match[20] | match[21] | match[22] | match[23] | match[24] | match[25] | match[26] | match[27] | match[28] | match[29] | match[30] | match[31]; always @(posedge clk) begin if (enable == 1) begin frame_out <= frame[found]; end end always @(posedge clk) begin if (w_enable == 1) begin page[rw_index] <= w_page; frame[rw_index] <= w_frame; end else begin r_page <= page[rw_index]; r_frame <= frame[rw_index]; end end endmodule
Go to most recent revision | Compare with Previous | Blame | View Log