OpenCores
URL https://opencores.org/ocsvn/eco32/eco32/trunk

Subversion Repositories eco32

[/] [eco32/] [trunk/] [doc/] [architecture.eco32e] - Rev 251

Go to most recent revision | Compare with Previous | Blame | View Log


Instruction Formats
-------------------

RRR (three register operands)
RRS (two registers and a signed half operand)
RRH (two registers and an unsigned half operand)
RHH (one register and a half operand, high-order 16 bits encoded)
RRB (two registers and a 16 bit signed offset operand)
J   (no registers and a 26 bit signed offset operand)
JR  (one register operand)


Instruction Set
---------------

Notation:
  'r[n]'        The bits representing 'r' are padded with zeroes
                to the left (or zeroes are dropped from the left)
                until a width of n bits is reached.
  'a || b'      The bits representing 'a' and 'b' are concatenated;
                'a' occupies the more significant bits.
All numbers are given in decimal (base 10), except when prefixed
with "0x", which means they are given in hexadecimal (base 16).

ADD (add)
  format:       RRR
  coding:       0x00[6] || rs1[5] || rs2[5] || rd[5] || 0[11]
  assembler:    add  rd,rs1,rs2
  example:      add  $1,$2,$3
  operation:    The contents of register rs2 are added to the contents
                of register rs1. The result is stored into register rd.
                Overflow is ignored.

ADDI (add immediate)
  format:       RRS
  coding:       0x01[6] || rs1[5] || rd[5] || simm[16]
  assembler:    add  rd,rs1,simm
  example:      add  $1,$2,1234
  operation:    The sign-extended immediate constant simm is added to
                the contents of register rs1. The result is stored into
                register rd. Overflow is ignored.

SUB (subtract)
  format:       RRR
  coding:       0x02[6] || rs1[5] || rs2[5] || rd[5] || 0[11]
  assembler:    sub  rd,rs1,rs2
  example:      sub  $1,$2,$3
  operation:    The contents of register rs2 are subtracted from the
                contents of register rs1. The result is stored into
                register rd. Overflow is ignored.

SUBI (subtract immediate)
  format:       RRS
  coding:       0x03[6] || rs1[5] || rd[5] || simm[16]
  assembler:    sub  rd,rs1,simm
  example:      add  $1,$2,1234
  operation:    The sign-extended immediate constant simm is subtracted
                from the contents of register rs1. The result is stored
                into register rd. Overflow is ignored.

AND (logical and)
  format:       RRR
  coding:       0x10[6] || rs1[5] || rs2[5] || rd[5] || 0[11]
  assembler:    and  rd,rs1,rs2
  example:      and  $1,$2,$3
  operation:    The contents of register rs2 are bitwise anded with the
                contents of register rs1. The result is stored into
                register rd.

ANDI (logical and immediate)
  format:       RRH
  coding:       0x11[6] || rs1[5] || rd[5] || uimm[16]
  assembler:    and  rd,rs1,uimm
  example:      and  $1,$2,1234
  operation:    The zero-extended immediate constant uimm is bitwise
                anded with the contents of register rs1. The result
                is stored into register rd.

OR (logical or)
  format:       RRR
  coding:       0x12[6] || rs1[5] || rs2[5] || rd[5] || 0[11]
  assembler:    or  rd,rs1,rs2
  example:      or  $1,$2,$3
  operation:    The contents of register rs2 are bitwise ored with the
                contents of register rs1. The result is stored into
                register rd.

ORI (logical or immediate)
  format:       RRH
  coding:       0x13[6] || rs1[5] || rd[5] || uimm[16]
  assembler:    or  rd,rs1,uimm
  example:      or  $1,$2,1234
  operation:    The zero-extended immediate constant uimm is bitwise
                ored with the contents of register rs1. The result
                is stored into register rd.

XOR (logical xor)
  format:       RRR
  coding:       0x14[6] || rs1[5] || rs2[5] || rd[5] || 0[11]
  assembler:    xor  rd,rs1,rs2
  example:      xor  $1,$2,$3
  operation:    The contents of register rs2 are bitwise xored with the
                contents of register rs1. The result is stored into
                register rd.
                Remark: (a xor b) <=> ((a and ~b) or (~a and b))

XORI (logical xor immediate)
  format:       RRH
  coding:       0x15[6] || rs1[5] || rd[5] || uimm[16]
  assembler:    xor  rd,rs1,uimm
  example:      xor  $1,$2,1234
  operation:    The zero-extended immediate constant uimm is bitwise
                xored with the contents of register rs1. The result
                is stored into register rd.
                Remark: (a xor b) <=> ((a and ~b) or (~a and b))

XNOR (logical xnor)
  format:       RRR
  coding:       0x16[6] || rs1[5] || rs2[5] || rd[5] || 0[11]
  assembler:    xnor  rd,rs1,rs2
  example:      xnor  $1,$2,$3
  operation:    The contents of register rs2 are bitwise xnored with the
                contents of register rs1. The result is stored into
                register rd.
                Remark: (a xnor b) <=> ((a and b) or (~a and ~b))

XNORI (logical xnor immediate)
  format:       RRH
  coding:       0x17[6] || rs1[5] || rd[5] || uimm[16]
  assembler:    xnor  rd,rs1,uimm
  example:      xnor  $1,$2,1234
  operation:    The zero-extended immediate constant uimm is bitwise
                xnored with the contents of register rs1. The result
                is stored into register rd.
                Remark: (a xnor b) <=> ((a and b) or (~a and ~b))

LDHI (load high immediate)
  format:       RHH
  coding:       0x1F[6] || 0[5] || rd[5] || uimm[16]
  assembler:    ldhi  rd,uimm
  example:      ldhi  $1,1234
  operation:    The zero-extended immediate constant uimm is shifted
                left by 16 bits. The result is stored into register rd.

BEQ (branch on equal)
  format:       RRB
  coding:       0x20[6] || rs1[5] || rs2[5] || simm[16]
  assembler:    beq  rs1,rs2,target
  example:      beq  $1,$2,label3
  operation:    If the contents of register rs1 are equal to the contents
                of register rs2, the sign-extended immediate constant
                simm is shifted left by two bits and added to the address
                of the instruction following the branch instruction. The
                result is placed into the program counter. If the contents
                differ, the next instruction after the branch is executed.

BNE (branch on not equal)
  format:       RRB
  coding:       0x21[6] || rs1[5] || rs2[5] || simm[16]
  assembler:    bne  rs1,rs2,target
  example:      bne  $1,$2,label3
  operation:    If the contents of register rs1 are not equal to the contents
                of register rs2, the sign-extended immediate constant
                simm is shifted left by two bits and added to the address
                of the instruction following the branch instruction. The
                result is placed into the program counter. If the contents
                are equal, the next instruction after the branch is executed.

BLEU (branch on less or equal unsigned)
  format:       RRB
  coding:       0x23[6] || rs1[5] || rs2[5] || simm[16]
  assembler:    bleu  rs1,rs2,target
  example:      bleu  $1,$2,label3
  operation:    If the contents of register rs1 are less than or equal
                to the contents of register rs2 (both are interpreted as
                unsigned numbers), the sign-extended immediate constant
                simm is shifted left by two bits and added to the address
                of the instruction following the branch instruction. The
                result is placed into the program counter. If the contents
                do not satisfy the condition, the next instruction after
                the branch is executed.

BLTU (branch on less than unsigned)
  format:       RRB
  coding:       0x25[6] || rs1[5] || rs2[5] || simm[16]
  assembler:    bltu  rs1,rs2,target
  example:      bltu  $1,$2,label3
  operation:    If the contents of register rs1 are less than the contents
                of register rs2 (both are interpreted as unsigned numbers),
                the sign-extended immediate constant simm is shifted left
                by two bits and added to the address of the instruction
                following the branch instruction. The result is placed into
                the program counter. If the contents do not satisfy the
                condition, the next instruction after the branch is executed.

BGEU (branch on greater or equal unsigned)
  format:       RRB
  coding:       0x27[6] || rs1[5] || rs2[5] || simm[16]
  assembler:    bgeu  rs1,rs2,target
  example:      bgeu  $1,$2,label3
  operation:    If the contents of register rs1 are greater than or equal
                to the contents of register rs2 (both are interpreted as
                unsigned numbers), the sign-extended immediate constant
                simm is shifted left by two bits and added to the address
                of the instruction following the branch instruction. The
                result is placed into the program counter. If the contents
                do not satisfy the condition, the next instruction after
                the branch is executed.

BGTU (branch on greater than unsigned)
  format:       RRB
  coding:       0x29[6] || rs1[5] || rs2[5] || simm[16]
  assembler:    bgtu  rs1,rs2,target
  example:      bgtu  $1,$2,label3
  operation:    If the contents of register rs1 are greater than the contents
                of register rs2 (both are interpreted as unsigned numbers),
                the sign-extended immediate constant simm is shifted left
                by two bits and added to the address of the instruction
                following the branch instruction. The result is placed into
                the program counter. If the contents do not satisfy the
                condition, the next instruction after the branch is executed.

J (jump)
  format:       J
  coding:       0x2A[6] || simm[26]
  assembler:    j  target
  example:      j  label3
  operation:    The sign-extended immediate constant simm is shifted left
                by two bits and added to the address of the instruction
                following the jump instruction. The result is placed into
                the program counter.

JR (jump register)
  format:       JR
  coding:       0x2B[6] || rs[5] || 0[5] || 0[16]
  assembler:    jr  rs
  example:      jr  $31
  operation:    The contents of register rs are placed into the program
                counter.

JAL (jump and link)
  format:       J
  coding:       0x2C[6] || simm[26]
  assembler:    jal  target
  example:      jal  label3
  operation:    The address of the instruction following the jal instruction
                is placed into register 31. The sign-extended immediate
                constant simm is shifted left by two bits and added to the
                address of the instruction following the jal instruction.
                The result is placed into the program counter.

LDW (load word)
  format:       RRS
  coding:       0x30[6] || rs[5] || rd[5] || simm[16]
  assembler:    ldw  rd,rs,simm
  example:      ldw  $1,$2,1234
  operation:    The sign-extended immediate constant simm is added to the
                contents of register rs to form an effective memory address.
                A word is read from this address and stored into register
                rd.

LDH (load halfword)
  format:       RRS
  coding:       0x31[6] || rs[5] || rd[5] || simm[16]
  assembler:    ldh  rd,rs,simm
  example:      ldh  $1,$2,1234
  operation:    The sign-extended immediate constant simm is added to the
                contents of register rs to form an effective memory address.
                A halfword is read from this address, sign-extended, and
                stored into register rd.

LDHU (load halfword unsigned)
  format:       RRS
  coding:       0x32[6] || rs[5] || rd[5] || simm[16]
  assembler:    ldhu  rd,rs,simm
  example:      ldhu  $1,$2,1234
  operation:    The sign-extended immediate constant simm is added to the
                contents of register rs to form an effective memory address.
                A halfword is read from this address, zero-extended, and
                stored into register rd.

LDB (load byte)
  format:       RRS
  coding:       0x33[6] || rs[5] || rd[5] || simm[16]
  assembler:    ldb  rd,rs,simm
  example:      ldb  $1,$2,1234
  operation:    The sign-extended immediate constant simm is added to the
                contents of register rs to form an effective memory address.
                A byte is read from this address, sign-extended, and stored
                into register rd.

LDBU (load byte unsigned)
  format:       RRS
  coding:       0x34[6] || rs[5] || rd[5] || simm[16]
  assembler:    ldbu  rd,rs,simm
  example:      ldbu  $1,$2,1234
  operation:    The sign-extended immediate constant simm is added to the
                contents of register rs to form an effective memory address.
                A byte is read from this address, zero-extended, and stored
                into register rd.

STW (store word)
  format:       RRS
  coding:       0x35[6] || rs[5] || rd[5] || simm[16]
  assembler:    stw  rd,rs,simm
  example:      stw  $1,$2,1234
  operation:    The sign-extended immediate constant simm is added to the
                contents of register rs to form an effective memory address.
                The contents of register rd (all 32 bits) are stored
                as a word to this address.

STH (store halfword)
  format:       RRS
  coding:       0x36[6] || rs[5] || rd[5] || simm[16]
  assembler:    sth  rd,rs,simm
  example:      sth  $1,$2,1234
  operation:    The sign-extended immediate constant simm is added to the
                contents of register rs to form an effective memory address.
                The contents of register rd (the lower 16 bits) are stored
                as a halfword to this address.

STB (store byte)
  format:       RRS
  coding:       0x37[6] || rs[5] || rd[5] || simm[16]
  assembler:    stb  rd,rs,simm
  example:      stb  $1,$2,1234
  operation:    The sign-extended immediate constant simm is added to the
                contents of register rs to form an effective memory address.
                The contents of register rd (the lowest 8 bits) are stored
                as a byte to this address.


Interrupts and Exceptions
-------------------------

There are neither interrupts nor exceptions in this version of ECO32e.
Unknown opcodes should nevertheless be recognized. A CPU simulation can
then report the execution of an unknown opcode; an implementation may
trap such an execution in a state of its controller which cannot be left
without reset.


Peripherals
-----------

Peripherals are memory-mapped. They need only support word accesses.
A sensible reaction to accesses with smaller widths (halfword or byte)
is not required.

In this version of ECO32e there are only two peripherals: a character
display and a keyboard.

The character display is capable of showing 30 lines with 80 characters
each. Its base address is 0x30100000. Each line occupies 128 words in
the I/O address space, one word for each column (and 48 unusable columns
at the end of the line). Therefore the address to which a character is
written and its location on the screen are related as follows:
    address = 0x30100000 + (line * 128 + column) * 4
The character to be displayed must be written as a word to the corresponding
address with its ASCII code contained in the lowest 8 bits of the word.

The keyboard is represented by two I/O registers. The status register
is located at address 0x30200000. When read (32 bits), its LSB indicates
if a character has been received from the physical keyboard. If this bit
is 1, the character can be read at address 0x30200004, the address of
the data register. By reading this latter address, the LSB of the
status register is automatically reset to 0. The data register must be
read with a word read; the character read is contained in the lowest
8 bits of the word.

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.