OpenCores
URL https://opencores.org/ocsvn/eco32/eco32/trunk

Subversion Repositories eco32

[/] [eco32/] [trunk/] [fp/] [implementation/] [mmix/] [mmmix.w] - Rev 125

Go to most recent revision | Compare with Previous | Blame | View Log

% This file is part of the MMIXware package (c) Donald E Knuth 1999
@i boilerplate.w %<< legal stuff: PLEASE READ IT BEFORE MAKING ANY CHANGES!

\def\title{MMMIX}
\def\MMIX{\.{MMIX}}
\def\Hex#1{\hbox{$^{\scriptscriptstyle\#}$\tt#1}} % experimental hex constant
@s octa int
@s tetra int
@s bool int
@s fetch int
@s specnode int

@* Introduction.
This \.{CWEB} program simulates how the \MMIX\ computer might be
implemented with a high-performance pipeline in many different configurations.
All of the complexities of \MMIX's architecture are treated, except for
multiprocessing and low-level details of memory mapped input/output.

The present program module, which contains the main routine for the
\MMIX\ meta-simulator, is primarily devoted to administrative tasks. Other modules
do the actual work after this module has told them what to do.

@ A user typically invokes the meta-simulator with a \UNIX/-like command line
of the general form
`\.{mmmix}~\.{configfile}~\.{progfile}',
where the \.{configfile} describes the characteristics
of an \MMIX\ implementation and the \.{progfile} contains a program to
be downloaded and run. Rules for configuration files appear in
the module called \.{mmix-config}. The program file is either
an ``\MMIX\ binary file'' dumped by {\mc MMIX-SIM}, or an
ASCII text file that describes hexadecimal data
in a rudimentary format. It is assumed to be binary if
its name ends with the extension `\.{.mmb}'.

@c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "mmix-pipe.h"
@#
char *config_file_name, *prog_file_name;
@<Global variables@>@;
@<Subroutines@>@;

int main(argc,argv)
  int argc;
  char *argv[];
{
  @<Parse the command line@>;
  MMIX_config(config_file_name);
  MMIX_init();
  mmix_io_init();
  @<Input the program@>;
  @<Run the simulation interactively@>;
  printf("Simulation ended at time %d.\n",ticks.l);
  print_stats();
  return 0;
}

@ The command line might also contain options, some day.
For now I'm forgetting them and simplifying everything until I gain
further experience.

@<Parse...@>=
if (argc!=3) {
  fprintf(stderr,"Usage: %s configfile progfile\n",argv[0]);
@.Usage: ...@>
  exit(-3);
}
config_file_name=argv[1];
prog_file_name=argv[2];

@ @<Input the program@>=
if (strlen(prog_file_name)>4 &&
     strcmp(prog_file_name+strlen(prog_file_name)-4,".mmb")==0)
  @<Input an \MMIX\ binary file@>@;
else @<Input a rudimentary hexadecimal file@>;
fclose(prog_file);

@* Hexadecimal input to memory.
A rudimentary hexadecimal input format is implemented here so that the
@^hexadecimal files@>
simulator can be run with essentially arbitrary data in the simulated memory.
The rules of this format are extremely simple: Each line of the file
either begins with (i)~12 hexadecimal digits followed by a colon; or
(ii)~a space followed by 16 hexadecimal digits. In case~(i), the 12
hex digits specify a 48-bit physical address, called the current
location. In case~(ii), the 16 hex digits specify an octabyte to be
stored in the current location; the current location is then increased by~8.
The current location should be a multiple of~8, but its three least
significant bits are actually ignored. Arbitrary comments can follow
the specification of a new current location or a new octabyte, as long
as each line is less than 99 characters long. For example, the file
$$\vbox{\halign{\tt#\hfil\cr
0123456789ab: SILLY EXAMPLE\cr
\ 0123456789abcdef first octabyte\cr
\ fedbca9876543210 second\cr}}$$
places the octabyte
\Hex{0123456789abcdef} into memory location \Hex{0123456789a8}
and \Hex{fedcba9876543210} into location \Hex{0123456789b0}.

@d BUF_SIZE 100

@<Glob...@>=
octa cur_loc;
octa cur_dat;
bool new_chunk;
char buffer[BUF_SIZE];
FILE *prog_file;

@ @<Input a rudimentary hexadecimal file@>=
{
  prog_file=fopen(prog_file_name,"r");
  if (!prog_file) {
    fprintf(stderr,"Panic: Can't open MMIX hexadecimal file %s!\n",prog_file_name);
@.Can't open...@>
    exit(-3);
  }
  new_chunk=true;
  while (1) {
    if (!fgets(buffer,BUF_SIZE,prog_file)) break;
    if (buffer[strlen(buffer)-1]!='\n') {
      fprintf(stderr,"Panic: Hexadecimal file line too long: `%s...'!\n",buffer);
@.Hexadecimal file line...@>
      exit(-3);
    }
    if (buffer[12]==':') @<Change the current location@>@;
    else if (buffer[0]==' ') @<Read an octabyte and advance |cur_loc|@>@;
    else {
      fprintf(stderr,"Panic: Improper hexadecimal file line: `%s'!\n",buffer);
@.Improper hexadecimal...@>
      exit(-3);
    }
  }
}

@ @<Change the current location@>=
{
  if (sscanf(buffer,"%4x%8x",&cur_loc.h,&cur_loc.l)!=2) {
    fprintf(stderr,"Panic: Improper hexadecimal file location: `%s'!\n",buffer);
@.Improper hexadecimal...@>
    exit(-3);
  }
  new_chunk=true;
}

@ @<Read an octabyte and advance |cur_loc|@>=
{
  if (sscanf(buffer+1,"%8x%8x",&cur_dat.h,&cur_dat.l)!=2) {
    fprintf(stderr,"Panic: Improper hexadecimal file data: `%s'!\n",buffer);
@.Improper hexadecimal...@>
    exit(-3);
  }
  if (new_chunk) mem_write(cur_loc,cur_dat);
  else mem_hash[last_h].chunk[(cur_loc.l&0xffff)>>3]=cur_dat;
  cur_loc.l+=8;
  if ((cur_loc.l&0xfff8)!=0) new_chunk=false;
  else {
    new_chunk=true;
    if ((cur_loc.l&0xffff0000)==0) cur_loc.h++;
  }
}

@* Binary input to memory.
When the program file was dumped by {\mc MMIX-SIM}, it
has the simple format discussed in exercise 1.4.3$'$--20 of the \MMIX\ fascicle.
@^binary files@>
@^segments@>
In this case we assume that the user's program has text, data, pool, and stack
segments, as in the conventions of that book.
We load it into four
$2^{32}$-byte pages of physical memory, one for each segment; page zero of
segment~$i$ is mapped to physical location $2^{32}i$. Page tables are kept in
physical locations starting at $2^{32}\times4$; static traps begin at
$2^{32}\times 5$ and dynamic traps at $2^{32}\times6$. (These conventions
agree with the special register settings
$\rm rT=\Hex{8000000500000000}$,
$\rm rTT=\Hex{8000000600000000}$,
$\rm rV=\Hex{369c200400000000}$
assumed by the stripped-down simulator.)

@<Input an \MMIX\ binary file@>=
{
  prog_file=fopen(prog_file_name,"rb");
  if (!prog_file) {
    fprintf(stderr,"Panic: Can't open MMIX binary file %s!\n",prog_file_name);
@.Can't open...@>
    exit(-3);
  }
  while (1) {
    if (!undump_octa()) break;
    new_chunk=true;
    cur_loc=cur_dat;
    if (cur_loc.h&0x9fffffff) bad_address=true;
    else bad_address=false, cur_loc.h >>= 29;
         /* apply trivial mapping function for each segment */
    @<Input consecutive octabytes beginning at |cur_loc|@>;
  }
  @<Set up the canned environment@>;
}

@ The |undump_octa| routine reads eight bytes from the binary file
|prog_file| into the global octabyte |cur_dat|,
taking care as usual to be big-endian regardless of the host computer's bias.
@^big-endian versus little-endian@>
@^little-endian versus big-endian@>

@<Sub...@>=
static bool undump_octa @,@,@[ARGS((void))@];@+@t}\6{@>
static bool undump_octa()
{
  register int t0,t1,t2,t3;
  t0=fgetc(prog_file);@+ if (t0==EOF) return false;
  t1=fgetc(prog_file);@+ if (t1==EOF) goto oops;
  t2=fgetc(prog_file);@+ if (t2==EOF) goto oops;
  t3=fgetc(prog_file);@+ if (t3==EOF) goto oops;
  cur_dat.h=(t0<<24)+(t1<<16)+(t2<<8)+t3;
  t0=fgetc(prog_file);@+ if (t0==EOF) goto oops;
  t1=fgetc(prog_file);@+ if (t1==EOF) goto oops;
  t2=fgetc(prog_file);@+ if (t2==EOF) goto oops;
  t3=fgetc(prog_file);@+ if (t3==EOF) goto oops;
  cur_dat.l=(t0<<24)+(t1<<16)+(t2<<8)+t3;
  return true;
oops: fprintf(stderr,"Premature end of file on %s!\n",prog_file_name);
@.Premature end of file...@>
  return false;
}

@ @<Input consecutive octabytes beginning at |cur_loc|@>=
while (1) {
  if (!undump_octa()) {
    fprintf(stderr,"Unexpected end of file on %s!\n",prog_file_name);
@.Unexpected end of file...@>
    break;
  }
  if (!(cur_dat.h || cur_dat.l)) break;
  if (bad_address) {
    fprintf(stderr,"Panic: Unsupported virtual address %08x%08x!\n",
@.Unsupported virtual address@>
                     cur_loc.h,cur_loc.l);
    exit(-5);
  }
  if (new_chunk) mem_write(cur_loc,cur_dat);
  else mem_hash[last_h].chunk[(cur_loc.l&0xffff)>>3]=cur_dat;
  cur_loc.l+=8;
  if ((cur_loc.l&0xfff8)!=0) new_chunk=false;
  else {
    new_chunk=true;
    if ((cur_loc.l&0xffff0000)==0) {
      bad_address=true; cur_loc.h=(cur_loc.h<<29)+1;
    }
  }
}

@ The primitive operating system assumed in simple programs of {\sl The
Art of Computer Programming\/} will set up text segment, data segment,
pool segment, and stack segment as in {\mc MMIX-SIM}. The runtime stack
will be initialized if we \.{UNSAVE} from the last location loaded
in the \.{.mmb} file.

@d rQ 16

@<Set up the canned environment@>=
if (cur_loc.h!=3) {
  fprintf(stderr,"Panic: MMIX binary file didn't set up the stack!\n");
@.MMIX binary file...@>
  exit(-6);
}
inst_ptr.o=mem_read(incr(cur_loc,-8*14)); /* \.{Main} */
inst_ptr.p=NULL;
cur_loc.h=0x60000000;
g[255].o=incr(cur_loc,-8); /* place to \.{UNSAVE} */
cur_dat.l=0x90;
if (mem_read(cur_dat).h) inst_ptr.o=cur_dat; /* start at |0x90| if nonzero */
head->inst=(UNSAVE<<24)+255, tail--; /* prefetch a fabricated command */
head->loc=incr(inst_ptr.o,-4); /* in case the \.{UNSAVE} is interrupted */
g[rT].o.h=0x80000005, g[rTT].o.h=0x80000006;
cur_dat.h=(RESUME<<24)+1, cur_dat.l=0, cur_loc.h=5, cur_loc.l=0;
mem_write(cur_loc,cur_dat); /* the primitive trap handler */
cur_dat.l=cur_dat.h, cur_dat.h=(NEGI<<24)+(255<<16)+1;
cur_loc.h=6, cur_loc.l=8;
mem_write(cur_loc,cur_dat); /* the primitive dynamic trap handler */
cur_dat.h=(GET<<24)+rQ, cur_dat.l=(PUTI<<24)+(rQ<<16), cur_loc.l=0;
mem_write(cur_loc,cur_dat); /* more of the primitive dynamic trap handler */
cur_dat.h=0, cur_dat.l=7; /* generate a PTE with \.{rwx} permission */
cur_loc.h=4; /* beginning of skeleton page table */
mem_write(cur_loc,cur_dat); /* PTE for the text segment */
ITcache->set[0][0].tag=zero_octa;
ITcache->set[0][0].data[0]=cur_dat; /* prime the IT cache */
cur_dat.l=6; /* PTE with read and write permission only */
cur_dat.h=1, cur_loc.l=3<<13;
mem_write(cur_loc,cur_dat); /* PTE for the data segment */
cur_dat.h=2, cur_loc.l=6<<13;
mem_write(cur_loc,cur_dat); /* PTE for the pool segment */
cur_dat.h=3, cur_loc.l=9<<13;
mem_write(cur_loc,cur_dat); /* PTE for the stack segment */
g[rK].o=neg_one; /* enable all interrupts */
g[rV].o.h=0x369c2004;
page_bad=false, page_r=4<<(32-13), page_s=32, page_mask.l=0xffffffff;
page_b[1]=3, page_b[2]=6, page_b[3]=9, page_b[4]=12;

@* Interaction. When prompted for instructions, this simulator
@.mmmix>@>
understands the following terse commands:

\def\bull{\smallbreak\textindent{$\bullet$}}
\def\<#1>{$\langle\,$#1$\,\rangle$}
\bull\<positive integer>: Run for this many clock cycles.

\bull\.{@@}\<hexadecimal integer>: Set the instruction pointer
to this virtual address; successive instructions will be fetched from here.

\bull\.{b}\<hexadecimal integer>: Set the breakpoint
to this virtual address; simulation will pause when an instruction from the
breakpoint address enters the fetch buffer.

\bull\.v\<hexadecimal integer>: Set the desired level of diagnostic
output; each bit in the hexadecimal integer enables certain printouts
when the simulator is running. Bit \Hex1 shows instructions when issued,
deissued, or committed; \Hex2 shows the pipeline and locks after each cycle;
\Hex4 shows each coroutine activation; \Hex8 each coroutine scheduling;
\Hex{10} reports when reading from an uninitialized chunk of memory;
\Hex{20} asks for online input when reading from addresses $\ge2^{48}$;
\Hex{40} reports all I/O to memory address $\ge2^{48}$;
\Hex{80} shows details of branch prediction;
\Hex{100} displays full cache contents including blocks with invalid tags.

\bull\.-\<integer>: Deissue this many instructions.

\bull\.l\<integer> or \.g\<integer>: Show current ``hot'' contents
of a local or global register.

\bull\.m\<hexadecimal integer>: Show current contents of a physical memory
address. (This value may not be up to date; newer values might appear
in the write buffer and/or in the caches.)

\bull\.f\<hexadecimal integer>: Insert a tetrabyte into the fetch buffer.
(Use with care!)

\bull\.i\<integer>: Set the interval counter rI to the given value; this will
trigger an interrupt after the specified number of cycles.

\bull\.{IT}, \.{DT}, \.I, \.D, or \.S: Show current contents of a cache.

\bull\.{D*} or \.{S*}: Show dirty blocks of a cache.

\bull\.p: Show current contents of the pipeline.

\bull\.s: Show current statistics on branch prediction and
speed of instruction issue.

\bull\.h: Help (show the possibilities for interaction).

\bull\.q: Quit.

@<Run the simulation interactively@>=
while (1) {
  printf("mmmix> ");@+fflush(stdout);
@.mmmix>@>
  fgets(buffer,BUF_SIZE,stdin);
  switch (buffer[0]) {
default: what_say:
  printf("Eh? Sorry, I don't understand. (Type h for help)\n");
  continue;
case 'q': case 'x': goto done;
  @<Cases for interaction@>@;
  }
}
done:@;

@ @<Cases...@>=
case 'h': case '?': printf("The interactive commands are as follows:\n");
  printf(" <n> to run for n cycles\n");
  printf(" @@<x> to take next instruction from location x\n");
  printf(" b<x> to pause when location x is fetched\n");
  printf(" v<x> to print specified diagnostics when running;\n");
  printf("    x=1[insts enter/leave pipe]+2[whole pipeline each cycle]+\n");
  printf("      4[coroutine activations]+8[coroutine scheduling]+\n");
  printf("      10[uninitialized read]+20[online I/O read]+\n");
  printf("      40[I/O read/write]+80[branch prediction details]+\n");
  printf("      100[invalid cache blocks displayed too]\n");
  printf(" -<n> to deissue n instructions\n");
  printf(" l<n> to print current value of local register n\n");
  printf(" g<n> to print current value of global register n\n");
  printf(" m<x> to print current value of memory address x\n");
  printf(" f<x> to insert instruction x into the fetch buffer\n");
  printf(" i<n> to initiate a timer interrupt after n cycles\n");
  printf(" IT, DT, I, D, or S to print current cache contents\n");
  printf(" D* or S* to print dirty blocks of a cache\n");
  printf(" p to print current pipeline contents\n");
  printf(" s to print current stats\n");
  printf(" h to print this message\n");
  printf(" q to exit\n");
  printf("(Here <n> is a decimal integer, <x> is hexadecimal.)\n");
  continue;

@ @<Cases...@>=
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
  if (sscanf(buffer,"%d",&n)!=1) goto what_say;
  printf("Running %d at time %d",n,ticks.l);
  if (bp.h==(tetra)-1 && bp.l==(tetra)-1) printf("\n");
  else printf(" with breakpoint %08x%08x\n",bp.h,bp.l);
  MMIX_run(n,bp);@+continue;
case '@@': inst_ptr.o=read_hex(buffer+1);@+inst_ptr.p=NULL;@+continue;
case 'b': bp=read_hex(buffer+1);@+continue;
case 'v': verbose=read_hex(buffer+1).l;@+continue;

@ @<Glob...@>=
int n,m; /* temporary integer */
octa bp={-1,-1}; /* breakpoint */
octa tmp; /* an octabyte of temporary interest */
static unsigned char d[BUF_SIZE];

@ Here's a simple program to read an octabyte in hexadecimal notation
from a buffer. It changes the buffer by storing a null character
after the input.
@^radix conversion@>

@<Sub...@>=
octa read_hex @,@,@[ARGS((char *))@];@+@t}\6{@>
octa read_hex(p)
  char *p;
{
  register int j,k;
  octa val;
  val.h=val.l=0;
  for (j=0;;j++) {
    if (p[j]>='0' && p[j]<='9') d[j]=p[j]-'0';
    else if (p[j]>='a' && p[j]<='f') d[j]=p[j]-'a'+10;
    else if (p[j]>='A' && p[j]<='F') d[j]=p[j]-'A'+10;
    else break;
  }
  p[j]='\0';
  for (j--,k=0;k<=j;k++) {
    if (k>=8) val.h+=d[j-k]<<(4*k-32);
    else val.l+=d[j-k]<<(4*k);
  }
  return val;
}

@ @<Cases...@>=
case '-':@+ if (sscanf(buffer+1,"%d",&n)!=1 || n<0) goto what_say;
  if (cool<=hot) m=hot-cool;@+else m=(hot-reorder_bot)+1+(reorder_top-cool);
  if (n>m) deissues=m;@+else deissues=n;
  continue;
case 'l':@+ if (sscanf(buffer+1,"%d",&n)!=1 || n<0) goto what_say;
  if (n>=lring_size) goto what_say;
  printf("  l[%d]=%08x%08x\n",n,l[n].o.h,l[n].o.l);@+continue;
case 'm': tmp=mem_read(read_hex(buffer+1));
  printf("  m[%s]=%08x%08x\n",buffer+1,tmp.h,tmp.l);@+continue;

@ The register stack pointers, rO and rS, are not kept up to date
in the |g| array. Therefore we have to deduce their values by
examining the pipeline.

@<Cases...@>=
case 'g':@+ if (sscanf(buffer+1,"%d",&n)!=1 || n<0) goto what_say;
  if (n>=256) goto what_say;
  if (n==rO || n==rS) {
    if (hot==cool) /* pipeline empty */
      g[rO].o=sl3(cool_O), g[rS].o=sl3(cool_S);
    else g[rO].o=sl3(hot->cur_O), g[rS].o=sl3(hot->cur_S);
  }
  printf("  g[%d]=%08x%08x\n",n,g[n].o.h,g[n].o.l);
  continue;

@ @<Sub...@>=
static octa sl3 @,@,@[ARGS((octa))@];@+@t}\6{@>
static octa sl3(y) /* shift left by 3 bits */
  octa y;
{
  register tetra yhl=y.h<<3, ylh=y.l>>29;
    y.h=yhl+ylh;@+ y.l<<=3;
  return y;
}

@ @<Cases...@>=
case 'I': print_cache(buffer[1]=='T'? ITcache: Icache,false);@+continue;
case 'D': print_cache(buffer[1]=='T'? DTcache: Dcache,@/
       buffer[1]=='*');@+continue;
case 'S': print_cache(Scache,buffer[1]=='*');@+continue;
case 'p': print_pipe();@+print_locks();@+continue;
case 's': print_stats();@+continue;
case 'i':@+ if (sscanf(buffer+1,"%d",&n)==1) g[rI].o=incr(zero_octa,n);
  continue;

@ @<Cases...@>=
case 'f': tmp=read_hex(buffer+1);
 {
   register fetch* new_tail;
   if (tail==fetch_bot) new_tail=fetch_top;
   else new_tail=tail-1;
   if (new_tail==head) printf("Sorry, the fetch buffer is full!\n");
   else {
     tail->loc=inst_ptr.o;
     tail->inst=tmp.l;
     tail->interrupt=0;
     tail->noted=false;
     tail=new_tail;
   }
   continue;
 }

@ A hidden case here, for me when debugging.
It essentially disables the translation caches, by mapping everything
to zero.

@<Cases...@>=
case 'd':@+if (ticks.l)
   printf("Sorry: I disable ITcache and DTcache only at the beginning!\n");
 else {
   ITcache->set[0][0].tag=zero_octa;
   ITcache->set[0][0].data[0]=seven_octa;
   DTcache->set[0][0].tag=zero_octa;
   DTcache->set[0][0].data[0]=seven_octa;
   g[rK].o=neg_one;
   page_bad=false;
   page_mask=neg_one;
   inst_ptr.p=(specnode*)1;
 }@+continue;

@ And another case, for me when kludging. At the moment,
it simply lists the functional unit names.

But I might decide to put other stuff here when giving a demo.

@<Cases...@>=
case 'k':@+ { register int j;
   for (j=0;j<funit_count;j++)
     printf("unit %s %d\n",funit[j].name,funit[j].k);
 }
 continue;

@ @<Glob...@>=
bool bad_address;
extern bool page_bad;
extern octa page_mask;
extern int page_r,page_s,page_b[5];
extern octa zero_octa;
extern octa neg_one;
octa seven_octa={0,7};
extern octa incr @,@,@[ARGS((octa y,int delta))@];
  /* unsigned $y+\delta$ ($\delta$ is signed) */
extern void mmix_io_init @,@,@[ARGS((void))@];
extern void MMIX_config @,@,@[ARGS((char*))@];

@* Index.

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.