Subversion Repositories eco32

;
; dskser.s -- disk made available by serial interface
;
 
;***************************************************************
 
	.export	dskcapser		; determine disk capacity
	.export	dskioser		; do disk I/O
 
	.import	ser1in
	.import	ser1out
	.import	ser1inchk
	.import	puts
 
	; constants for communication with disk server
	.set	SYN,0x16		; to initiate the three-way handshake
	.set	ACK,0x06		; acknowledgement for handshake
	.set	RESULT_OK,0x00		; server successfully executed cmd
					; everything else means error
 
	.set	WAIT_DELAY,800000	; count for delay loop
 
;***************************************************************
 
	.code
	.align	4
 
dskcapser:
	sub	$29,$29,16
	stw	$16,$29,0
	stw	$17,$29,4
	stw	$18,$29,8
	stw	$31,$29,12
	add	$4,$0,trymsg		; say what we are doing
	jal	puts
	add	$18,$0,$0		; capacity == 0 if disk not present
	add	$16,$0,10		; 10 tries to get a connection
handshake1:
	sub	$16,$16,1
	add	$4,$0,SYN
	jal	ser1out			; send SYN
	add	$17,$0,WAIT_DELAY	; wait for ACK
handshake2:
	sub	$17,$17,1
	jal	ser1inchk
	bne	$2,$0,handshake3
	bne	$17,$0,handshake2
	add	$4,$0,timeoutmsg
	jal	puts
	bne	$16,$0,handshake1
	add	$4,$0,frustratedmsg
	jal	puts
	j	dskcapx
handshake3:
	jal	ser1in
	add	$8,$0,ACK
	bne	$2,$8,dskcapx
	; we got an ACK so we return it
	add	$4,$0,ACK
	jal	ser1out
 
	; ask it for its capacity
	add	$4,$0,'c'
	jal	ser1out			; request
	jal	ser1in			; first byte of response
	bne	$2,$0,dskcapx		; exit if error
 
	; all is well and the server will give us the capacity
	add	$16,$0,4		; 4 bytes to read
dskcap1:
	sll	$18,$18,8
	jal	ser1in
	or	$18,$18,$2		; most significant byte first
	sub	$16,$16,1
	bne	$16,$0,dskcap1
 
	; return value is in $18
dskcapx:
	add	$2,$0,$18
	ldw	$16,$29,0
	ldw	$17,$29,4
	ldw	$18,$29,8
	ldw	$31,$29,12
	add	$29,$29,16
	jr	$31
 
	.data
	.align	4
 
trymsg:
	.byte	"Trying to connect to disk server..."
	.byte	0x0A, 0
 
timeoutmsg:
	.byte	"Request timed out..."
	.byte	0x0A, 0
 
frustratedmsg:
	.byte	"Unable to establish connection to disk server."
	.byte	0x0A, 0
 
	.code
	.align	4
 
dskioser:
	sub	$29,$29,24
	stw	$16,$29,0
	stw	$17,$29,4
	stw	$18,$29,8
	stw	$19,$29,12
	stw	$20,$29,16
	stw	$31,$29,20
	add	$16,$0,$4		; command
	add	$17,$0,$5		; start at sector
	add	$8,$0,0xc0000000
	or	$18,$8,$6		; memory address (logicalized)
	add	$19,$0,$7		; number of sectors
 
	; switch over command
	add	$8,$0,'r'
	beq	$8,$16,dskior		; read
	add	$8,$0,'w'
	beq	$8,$16,dskiow		; write
	; unknown command
	add	$2,$0,1			; value != 0 signifies error
	j	dskiox
 
	; read from disk
dskior:
dskior1:				; loop over number of sectors
	beq	$19,$0,dskiorsuc	; successful return
	sub	$19,$19,1
	; read a sector
	add	$4,$0,'r'
	jal	ser1out
	; send sector number
	add	$20,$0,32		; 4 bytes
dskior2:
	sub	$20,$20,8
	slr	$4,$17,$20
	and	$4,$4,0xff
	jal	ser1out
	bne	$20,$0,dskior2
	add	$17,$17,1
	; get answer
	jal	ser1in
	bne	$2,$0,dskiox		; $2 != 0 so we use it as return code
	; read data
	add	$20,$0,512
dskior3:
	sub	$20,$20,1
	jal	ser1in
	stb	$2,$18,0
	add	$18,$18,1
	bne	$20,$0,dskior3
	j	dskior1
dskiorsuc:
	add	$2,$0,$0
	j	dskiox
 
	; write to disk
dskiow:
dskiow1:				; loop over number of sectors
	beq	$19,$0,dskiowsuc	; successful return
	sub	$19,$19,1
	; write a sector
	add	$4,$0,'w'
	jal	ser1out
	; send sector number
	add	$20,$0,32		; 4 bytes
dskiow2:
	sub	$20,$20,8
	slr	$4,$17,$20
	and	$4,$4,0xff
	jal	ser1out
	bne	$20,$0,dskiow2
	add	$17,$17,1
	; write data
	add	$20,$0,512
dskiow3:
	sub	$20,$20,1
	ldbu	$4,$18,0
	jal	ser1out
	add	$18,$18,1
	bne	$20,$0,dskiow3
	; get answer
	jal	ser1in
	bne	$2,$0,dskiox
	j	dskiow1
dskiowsuc:
	add	$2,$0,$0
dskiox:
	ldw	$16,$29,0
	ldw	$17,$29,4
	ldw	$18,$29,8
	ldw	$19,$29,12
	ldw	$20,$29,16
	ldw	$31,$29,20
	add	$29,$29,24
	jr	$31