URL
https://opencores.org/ocsvn/eco32/eco32/trunk
Subversion Repositories eco32
[/] [eco32/] [trunk/] [stdalone/] [README] - Rev 299
Go to most recent revision | Compare with Previous | Blame | View Log
There are four different ways to run a standalone program.
1. Simulator: Load the program with the '-l' command-line option
into the simulated memory; use '-a 0x10000' to set the load
address. Each Makefile has a target 'run' to automate this.
2. Simulator: Pack the program onto a simulated disk (this will
happen automatically if you use the Makefile target 'run-sim'
in the subdirectory build/run). Boot this disk. Choose the
partition with the bootable EOS32 file system, and enter
'/boot/<progname.bin>' as the 'path to kernel'.
3. FPGA: Load the program with the help of the load server. Type
'loadserv <serial_device> <progname.exo>' on the PC side, and
'load 1' on the FPGA side (which runs the machine monitor).
4. FPGA: Pack the program onto a simulated disk and make the disk
available for use with the help of the disk server (this will
happen automatically if you use the Makefile target 'run-server'
in the subdirectory build/run). Type 'boot 1' on the FPGA side
(which runs the machine monitor), and proceed as in 2.
Go to most recent revision | Compare with Previous | Blame | View Log