URL
https://opencores.org/ocsvn/esoc/esoc/trunk
Subversion Repositories esoc
[/] [esoc/] [trunk/] [Sources/] [logixa/] [esoc_port_processor_search.vhd] - Rev 53
Compare with Previous | Blame | View Log
-------------------------------------------------------------------------------- -- -- This VHDL file was generated by EASE/HDL 7.4 Revision 4 from HDL Works B.V. -- -- Ease library : work -- HDL library : work -- Host name : S212065 -- User name : df768 -- Time stamp : Tue Aug 19 08:05:18 2014 -- -- Designed by : L.Maarsen -- Company : LogiXA -- Project info : eSoC -- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Object : Entity work.esoc_port_processor_search -- Last modified : Mon Apr 14 12:49:39 2014. -------------------------------------------------------------------------------- library ieee, std, work; use ieee.std_logic_1164.all; use std.textio.all; use ieee.numeric_std.all; use work.package_esoc_configuration.all; entity esoc_port_processor_search is generic( esoc_port_nr : integer := 0); port( clk_search : in std_logic; inbound_header : in std_logic_vector(111 downto 0); inbound_header_empty : in std_logic; inbound_header_read : out std_logic; inbound_vlan_member : in STD_LOGIC_VECTOR(0 downto 0); reset : in std_logic; search_data : out STD_LOGIC_VECTOR(15 downto 0); search_done_cnt : out std_logic; search_drop_cnt : out std_logic; search_eof : out std_logic; search_gnt_wr : in std_logic; search_key : out std_logic_vector(63 downto 0); search_req : out std_logic; search_result : in std_logic_vector(esoc_port_count-1 downto 0); search_result_av : in std_logic; search_sof : out std_logic; search_write : out STD_LOGIC); end entity esoc_port_processor_search; -------------------------------------------------------------------------------- -- Object : Architecture work.esoc_port_processor_search.esoc_port_processor_search -- Last modified : Mon Apr 14 12:49:39 2014. -------------------------------------------------------------------------------- architecture esoc_port_processor_search of esoc_port_processor_search is type search_states is (idle, send_key_1, send_key_2, wait_for_result); signal search_state: search_states; signal search_sof_o: std_logic; signal search_eof_o: std_logic; signal search_key_o: std_logic_vector(search_key'high downto 0); signal inbound_header_empty_i: std_logic; begin -- control the shared bus to the search engine search_sof <= search_sof_o when search_gnt_wr = '1' else 'Z'; search_eof <= search_eof_o when search_gnt_wr = '1' else 'Z'; search_key <= search_key_o when search_gnt_wr = '1' else (others => 'Z'); --============================================================================================================= -- Process : -- Description : --============================================================================================================= debug: process(clk_search, reset) begin if reset = '1' then inbound_header_read <= '0'; inbound_header_empty_i <= '0'; search_req <= '0'; search_sof_o <= '0'; search_eof_o <= '0'; search_key_o <= (others => '0'); search_data <= (others => '0'); search_write <= '0'; search_done_cnt <= '0'; search_drop_cnt <= '0'; search_state <= idle; elsif clk_search'event and clk_search = '1' then -- reset one clock active signals search_eof_o <= '0'; search_done_cnt <= '0'; search_drop_cnt <= '0'; search_write <= '0'; inbound_header_read <= '0'; -- delay the empty signal to proces the VLAN membership of the first packet correctly. When the header -- data of first packet is written in de header FIFO the empty signal deasserts, but in parallel (outside -- this entity) the VLAN ID RAM is addressed. This entity detects the deasserted EMTPY signal and expects -- the corresponding VLAN membership info from the VLAN ID RAM, which is not available at that time! -- This is only applicable if the first header in the FIFO is from a tagged packet and the EMPTY latency of the -- FIFO is 0, the latter is not the case for Altera, so you can skip this delay by using the inbound_header_empty -- iso. the inbound_header_empty_i signal in the search_state idle .... check simulation! inbound_header_empty_i <= inbound_header_empty; case search_state is when idle => -- used to insert a clock delay search_state <= send_key_1; when send_key_1 => -- check for new header data,new header data means new packet is coming or already available if inbound_header_empty = '0' then -- Is the inbound port member of the VID of the tagged packet or -- is the packet untagged and does the switch use the port default VID? if inbound_header(esoc_inbound_header_vlan_flag) = '0' or inbound_vlan_member = "1" then -- Request bus to the search engine, prepare to transfer VID and DA search_req <= '1'; search_sof_o <= '1'; search_key_o(esoc_search_bus_vlan+11 downto esoc_search_bus_vlan) <= inbound_header(esoc_inbound_header_vlan+11 downto esoc_inbound_header_vlan); search_key_o(esoc_search_bus_mac+47 downto esoc_search_bus_mac) <= inbound_header(esoc_inbound_header_dmac_lo+47 downto esoc_inbound_header_dmac_lo); search_state <= send_key_2; -- Packet is tagged and the inbound port is not member of the packet VID else -- Write destination port (none) and acknowledge header data search_data <= (others => '0'); search_write <= '1'; inbound_header_read <= '1'; search_drop_cnt <= '1'; search_state <= idle; end if; end if; when send_key_2 => -- VID and DA Address accepted when granted, provide Port Number and SA Address for learning process if search_gnt_wr = '1' then search_key_o(esoc_search_bus_sport+15 downto esoc_search_bus_sport) <= (others => '0'); search_key_o(esoc_search_bus_sport+esoc_port_nr) <= '1'; search_key_o(esoc_search_bus_mac+47 downto esoc_search_bus_mac) <= inbound_header(esoc_inbound_header_smac_lo+47 downto esoc_inbound_header_smac_lo); search_sof_o <= '0'; inbound_header_read <= '1'; search_state <= wait_for_result; end if; when wait_for_result => -- Wait for result from search engine if search_result_av = '1' then -- Write destination ports, skip your self, acknowledge header data search_data(search_result'high downto 0) <= search_result; search_data(esoc_port_nr) <= '0'; search_write <= '1'; search_done_cnt <= '1'; search_req <= '0'; search_eof_o <= '1'; search_state <= send_key_1; end if; when others => search_state <= idle; end case; end if; end process; end architecture esoc_port_processor_search ; -- of esoc_port_processor_search