URL
https://opencores.org/ocsvn/ethmac/ethmac/trunk
Subversion Repositories ethmac
[/] [ethmac/] [trunk/] [bench/] [verilog/] [eth_phy_defines.v] - Rev 344
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// File name: eth_phy_defines.v //// //// //// //// This file is part of the Ethernet IP core project //// //// http://www.opencores.org/projects/ethmac/ //// //// //// //// Author(s): //// //// - Tadej Markovic, tadej@opencores.org //// //// //// //// All additional information is available in the README.txt //// //// file. //// //// //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2002, Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.1 2002/09/13 11:57:20 mohor // New testbench. Thanks to Tadej M - "The Spammer". // // // // Address of PHY device (LXT971A) `define ETH_PHY_ADDR 5'h01 // LED/Configuration pins on PHY device - see the specification, page 26, table 8 // Initial set of bits 13, 12 and 8 of Control Register `define LED_CFG1 1'b0 `define LED_CFG2 1'b0 `define LED_CFG3 1'b1 // Supported speeds and physical ports - see the specification, page 67, table 41 // Set bits 15 to 9 of Status Register `define SUPPORTED_SPEED_AND_PORT 7'h3F // Extended status register (address 15) // Set bit 8 of Status Register `define EXTENDED_STATUS 1'b0 // Default status bits - see the specification, page 67, table 41 // Set bits 6 to 0 of Status Register `define DEFAULT_STATUS 7'h09 // PHY ID 1 number - see the specification, page 68, table 42 // Set bits of Phy Id Register 1 `define PHY_ID1 16'h0013 // PHY ID 2 number - see the specification, page 68, table 43 // Set bits 15 to 10 of Phy Id Register 2 `define PHY_ID2 6'h1E // Manufacturer MODEL number - see the specification, page 68, table 43 // Set bits 9 to 4 of Phy Id Register 2 `define MAN_MODEL_NUM 6'h0E // Manufacturer REVISION number - see the specification, page 68, table 43 // Set bits 3 to 0 of Phy Id Register 2 `define MAN_REVISION_NUM 4'h2
Go to most recent revision | Compare with Previous | Blame | View Log