URL
https://opencores.org/ocsvn/ethmac/ethmac/trunk
Subversion Repositories ethmac
[/] [ethmac/] [trunk/] [bench/] [verilog/] [wb_master32.v] - Rev 359
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// File name "wb_master32.v" //// //// //// //// This file is part of the Ethernet IP core project //// //// http://www.opencores.org/project,ethmac //// //// //// //// Author(s): //// //// - Miha Dolenc (mihad@opencores.org) //// //// //// //// All additional information is available in the README.pdf //// //// file. //// //// //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2002 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.1 2002/09/13 11:57:20 mohor // New testbench. Thanks to Tadej M - "The Spammer". // // Revision 1.1 2002/07/29 11:25:20 mihad // Adding test bench for memory interface // // Revision 1.1 2002/02/01 13:39:43 mihad // Initial testbench import. Still under development // // `include "wb_model_defines.v" `include "timescale.v" module WB_MASTER32 ( CLK_I, RST_I, TAG_I, TAG_O, ACK_I, ADR_O, CYC_O, DAT_I, DAT_O, ERR_I, RTY_I, SEL_O, STB_O, WE_O, CAB_O ); input CLK_I; input RST_I; input `WB_TAG_TYPE TAG_I; output `WB_TAG_TYPE TAG_O; input ACK_I; output `WB_ADDR_TYPE ADR_O; output CYC_O; input `WB_DATA_TYPE DAT_I; output `WB_DATA_TYPE DAT_O; input ERR_I; input RTY_I; output `WB_SEL_TYPE SEL_O; output STB_O; output WE_O; output CAB_O ; // period length real Tp ; reg `WB_ADDR_TYPE ADR_O; reg `WB_SEL_TYPE SEL_O; reg `WB_TAG_TYPE TAG_O; reg CYC_O; reg WE_O; reg `WB_DATA_TYPE DAT_O; reg CAB_O ; reg STB_O ; // variable used for indication on whether cycle was already started reg in_use ; // because of non-blocking assignments CYC_O is not sufficient indicator for cycle starting - this var is used in its place reg cycle_in_progress ; // same goes for CAB_O signal reg cab ; reg we ; task start_cycle ; input is_cab ; input write ; output ok ; // ok indicates to the caller that cycle was started succesfully - if not, caller must take appropriate action begin:main ok = 1 ; // just check if valid value is provided for CAB_O signal (no x's or z's allowed) if ( (is_cab !== 1'b0) && (is_cab !== 1'b1) ) begin $display("*E, invalid CAB value for cycle! Requested CAB_O value = %b, Time %t ", is_cab, $time) ; ok = 0 ; disable main ; end if ( (cycle_in_progress === 1) || (CYC_O === 1)) begin // cycle was previously started - allow cycle to continue if CAB and WE values match $display("*W, cycle already in progress when start_cycle routine was called! Time %t ", $time) ; if ((CAB_O !== is_cab) || (WE_O !== write) ) begin ok = 0 ; if ( is_cab === 1 ) $display("*E, cab cycle start attempted when non-cab cycle was in progress! Time %t", $time) ; else $display("*E, non-cab cycle start attempted when cab cycle was in progress! Time %t", $time) ; if ( we === 1 ) $display("*E, write cycle start attempted when read cycle was in progress! Time %t", $time) ; else $display("*E, read cycle start attempted when write cycle was in progress! Time %t", $time) ; disable main ; end end CYC_O <= #(Tp - `Tsetup) 1'b1 ; CAB_O <= #(Tp - `Tsetup) is_cab ; WE_O <= #(Tp - `Tsetup) write ; // this non-blocking assignments are made to internal variables, so read and write tasks can be called immediately after cycle start task cycle_in_progress = 1'b1 ; cab = is_cab ; we = write ; end endtask //start_cycle task end_cycle ; begin if ( CYC_O !== 1'b1 ) $display("*W, end_cycle routine called when CYC_O value was %b! Time %t ", CYC_O, $time) ; CYC_O <= #`Thold 1'b0 ; CAB_O <= #`Thold 1'b0 ; cycle_in_progress = 1'b0 ; end endtask //end_cycle task modify_cycle ; begin if ( CYC_O !== 1'b1 ) $display("*W, modify_cycle routine called when CYC_O value was %b! Time %t ", CYC_O, $time) ; we = ~we ; WE_O <= #(Tp - `Tsetup) we ; end endtask //modify_cycle task wbm_read ; input `READ_STIM_TYPE input_data ; inout `READ_RETURN_TYPE output_data ; reg `WB_ADDR_TYPE address ; reg `WB_DATA_TYPE data ; reg `WB_SEL_TYPE sel ; reg `WB_TAG_TYPE tag ; integer num_of_cyc ; begin:main output_data`TB_ERROR_BIT = 1'b0 ; // check if task was called before previous call to read or write finished if ( in_use === 1 ) begin $display("*E, wbm_read routine re-entered or called concurently with write routine! Time %t ", $time) ; output_data`TB_ERROR_BIT = 1'b1 ; disable main ; end if ( cycle_in_progress !== 1 ) begin $display("*E, wbm_read routine called without start_cycle routine being called first! Time %t ", $time) ; output_data`TB_ERROR_BIT = 1'b1 ; disable main ; end if ( we !== 0 ) begin $display("*E, wbm_read routine called after write cycle was started! Time %t ", $time) ; output_data`TB_ERROR_BIT = 1'b1 ; disable main ; end // this branch contains timing controls - claim the use of WISHBONE in_use = 1 ; num_of_cyc = `WAIT_FOR_RESPONSE ; // assign data outputs ADR_O <= #(Tp - `Tsetup) input_data`READ_ADDRESS ; SEL_O <= #(Tp - `Tsetup) input_data`READ_SEL ; TAG_O <= #(Tp - `Tsetup) input_data`READ_TAG_STIM ; // assign control output STB_O <= #(Tp - `Tsetup) 1'b1 ; output_data`CYC_ACK = 0 ; output_data`CYC_RTY = 0 ; output_data`CYC_ERR = 0 ; @(posedge CLK_I) ; output_data`CYC_ACK = ACK_I ; output_data`CYC_RTY = RTY_I ; output_data`CYC_ERR = ERR_I ; while ( (num_of_cyc > 0) && (output_data`CYC_RESPONSE === 0) ) begin @(posedge CLK_I) ; output_data`CYC_ACK = ACK_I ; output_data`CYC_RTY = RTY_I ; output_data`CYC_ERR = ERR_I ; num_of_cyc = num_of_cyc - 1 ; end output_data`READ_DATA = DAT_I ; output_data`READ_TAG_RET = TAG_I ; if ( output_data`CYC_RESPONSE === 0 ) begin $display("*W, Terminating read cycle because no response was received in %d cycles! Time %t ", `WAIT_FOR_RESPONSE, $time) ; end if ( output_data`CYC_ACK === 1 && output_data`CYC_RTY === 0 && output_data`CYC_ERR === 0 ) output_data`CYC_ACTUAL_TRANSFER = output_data`CYC_ACTUAL_TRANSFER + 1 ; STB_O <= #`Thold 1'b0 ; ADR_O <= #`Thold {`WB_ADDR_WIDTH{1'bx}} ; SEL_O <= #`Thold {`WB_SEL_WIDTH{1'bx}} ; TAG_O <= #`Thold {`WB_TAG_WIDTH{1'bx}} ; in_use = 0 ; end endtask // wbm_read task wbm_write ; input `WRITE_STIM_TYPE input_data ; inout `WRITE_RETURN_TYPE output_data ; reg `WB_ADDR_TYPE address ; reg `WB_DATA_TYPE data ; reg `WB_SEL_TYPE sel ; reg `WB_TAG_TYPE tag ; integer num_of_cyc ; begin:main output_data`TB_ERROR_BIT = 1'b0 ; // check if task was called before previous call to read or write finished if ( in_use === 1 ) begin $display("*E, wbm_write routine re-entered or called concurently with read routine! Time %t ", $time) ; output_data`TB_ERROR_BIT = 1'b1 ; disable main ; end if ( cycle_in_progress !== 1 ) begin $display("*E, wbm_write routine called without start_cycle routine being called first! Time %t ", $time) ; output_data`TB_ERROR_BIT = 1'b1 ; disable main ; end if ( we !== 1 ) begin $display("*E, wbm_write routine after read cycle was started! Time %t ", $time) ; output_data`TB_ERROR_BIT = 1'b1 ; disable main ; end // this branch contains timing controls - claim the use of WISHBONE in_use = 1 ; num_of_cyc = `WAIT_FOR_RESPONSE ; ADR_O <= #(Tp - `Tsetup) input_data`WRITE_ADDRESS ; DAT_O <= #(Tp - `Tsetup) input_data`WRITE_DATA ; SEL_O <= #(Tp - `Tsetup) input_data`WRITE_SEL ; TAG_O <= #(Tp - `Tsetup) input_data`WRITE_TAG_STIM ; STB_O <= #(Tp - `Tsetup) 1'b1 ; output_data`CYC_ACK = 0 ; output_data`CYC_RTY = 0 ; output_data`CYC_ERR = 0 ; @(posedge CLK_I) ; output_data`CYC_ACK = ACK_I ; output_data`CYC_RTY = RTY_I ; output_data`CYC_ERR = ERR_I ; while ( (num_of_cyc > 0) && (output_data`CYC_RESPONSE === 0) ) begin @(posedge CLK_I) ; output_data`CYC_ACK = ACK_I ; output_data`CYC_RTY = RTY_I ; output_data`CYC_ERR = ERR_I ; num_of_cyc = num_of_cyc - 1 ; end output_data`WRITE_TAG_RET = TAG_I ; if ( output_data`CYC_RESPONSE === 0 ) begin $display("*W, Terminating write cycle because no response was received in %d cycles! Time %t ", `WAIT_FOR_RESPONSE, $time) ; end if ( output_data`CYC_ACK === 1 && output_data`CYC_RTY === 0 && output_data`CYC_ERR === 0 ) output_data`CYC_ACTUAL_TRANSFER = output_data`CYC_ACTUAL_TRANSFER + 1 ; ADR_O <= #`Thold {`WB_ADDR_WIDTH{1'bx}} ; DAT_O <= #`Thold {`WB_DATA_WIDTH{1'bx}} ; SEL_O <= #`Thold {`WB_SEL_WIDTH{1'bx}} ; TAG_O <= #`Thold {`WB_TAG_WIDTH{1'bx}} ; STB_O <= #`Thold 1'b0 ; in_use = 0 ; end endtask //wbm_write initial begin Tp = 1 / `WB_FREQ ; in_use = 0 ; cycle_in_progress = 0 ; cab = 0 ; ADR_O <= {`WB_ADDR_WIDTH{1'bx}} ; DAT_O <= {`WB_DATA_WIDTH{1'bx}} ; SEL_O <= {`WB_SEL_WIDTH{1'bx}} ; TAG_O <= {`WB_TAG_WIDTH{1'bx}} ; CYC_O <= 1'b0 ; STB_O <= 1'b0 ; CAB_O <= 1'b0 ; WE_O <= 1'b0 ; if ( `Tsetup > Tp || `Thold >= Tp ) begin $display("Either Tsetup or Thold values for WISHBONE BFMs are too large!") ; $stop ; end end endmodule
Go to most recent revision | Compare with Previous | Blame | View Log