URL
https://opencores.org/ocsvn/forwardcom/forwardcom/trunk
Subversion Repositories forwardcom
[/] [forwardcom/] [trunk/] [debug_display.sv] - Rev 91
Go to most recent revision | Compare with Previous | Blame | View Log
//////////////////////////////////////////////////////////////////////////////////
// Engineer: Agner Fog
//
// Create date: 2020-06-29
// Last modified: 2021-07-01
// Module name: debug_display
// Project name: ForwardCom soft core
// Target device: Artix 7 - Nexys A7-100T
// Tool versions: Vivado 2020.1
// License: CERN-OHL-W v. 2 or later
// Description: showing each stage of the pipeline on LCD displays during debugging
//
//////////////////////////////////////////////////////////////////////////////////
`include "defines.vh"
module debug_display (
input clock, // system clock (100 MHz)
input clock_enable, // clock enable. Used when single-stepping
input reset_button_debounced, // reset button
// from fetch stage
input [63:0] fetch_instruction, // first words of instruction
input [15:0] fetch_instruction_pointer, // point to current instruction
input fetch_valid, // output from fetch is ready
input fetch_jump, // jump instruction bypassing pipeline
input fetch_call_e, // executing call instruction
input fetch_return_e, // executing return instruction
input registerread_stall_predict,// address generation stalled next
input addrgen_stall_next, // address generation stalled next
input dataread_stall_predict, // alu stalled next
input alu_stall_next, // alu stalled next
input muldiv_stall_next, // muldiv stalled next
input inout_stall_next, // in_out_ports stalled next
// from decoder
input [63:0] decoder_instruction, // first words of instruction
input [15:0] decoder_instruction_pointer,// address of current instruction
input decoder_valid, // output from decoder is ready
// from register_read
input [63:0] registerread_instruction, // first words of instruction
input [15:0] registerread_instruction_pointer, // address of current instruction
input registerread_valid, // output from decode_wait is ready
// from address generator
input [63:0] addrgen_instruction, // first words of instruction
input [15:0] addrgen_instruction_pointer,// address of current instruction
input addrgen_valid, // output from addrgen is ready
// from data read
input [63:0] dataread_instruction, // first words of instruction
input [15:0] dataread_instruction_pointer, // address of current instruction
input [6:0] dataread_opx, // operation ID in execution unit. This is mostly equal to op1 for multiformat instructions
input dataread_valid, // output from addrwait is ready
input [`RB:0] dataread_operand1, // first register operand RD or RU
input [`RB:0] dataread_operand2, // second register operand RS
input [`RB:0] dataread_operand3, // last register operand RT
input [`MASKSZ:0] dataread_mask_val, // mask value
input [15:0] ram_data_in, // memory operand from data ram
input dataread_opr2_from_ram, // value of operand 2 comes from data ram
input dataread_opr3_from_ram, // value of last operand comes from data ram
// from ALU
//input [6:0] writea1, // register to write
input [31:0] alu_result, // result from ALU
input [`TAG_WIDTH-1:0] write_tag1, // instruction tag on result bus
input alu_valid, // output from alu is ready
input alu_jump, // jump instruction: jump taken
//input alu_nojump, // jump instruction: jump not taken
input [15:0] alu_jump_pointer, // jump target address
// from muldiv result buses
input [31:0] writeport2, // result bus 2 from muldiv etc.
input write_en2,
input [`TAG_WIDTH-1:0] write_tag2,
// output to LCD display driver
output reg lcd_rs, // LCD RS pin
output reg [1:0] lcd_e, // enable pins for two LCD displays
output reg [3:0] lcd_data // LCD data, 4 bit bus
);
// LCD display data
reg [3:0] row; // row number (0 = top, 7 = bottom, 8 = finished)
reg [4:0] column; // column number (0 = left)
reg [7:0] display_text[0:19]; // text for one line
reg [4:0] text_length; // length of text
reg display_write; // write command for display
reg eol; // pad with spaces until end of line
reg display_ready; // display ready for next line
reg [1:0] state; // 0: idle
// 1: set text. send display_write signal to LCD driver
// 2: wait for display ready
// 3: row++
reg [2:0] delay; // delay for display_write signal
reg [63:0] alu_instruction; // first word of instruction currently in ALU
reg [15:0] alu_instruction_pointer; // address of instruction currently in ALU
reg [6:0] alu_opx; // operation ID in alu
reg [7:0] instruction_name[0:5]; // name of instruction
reg [15:0] opr1_val; // first operand RD or RU
reg [15:0] opr2_val; // second operand RS
reg [15:0] opr3_val; // third operand RT, immediate, or memory
reg mask_val; // mask register value, bit 0
// LCD display driver
lcd lcd_inst (
.clock(clock), // system clock 100 MHz
.reset(reset_button_debounced), // reset and clear
.x(column), // column number (0 = left)
.y(row[2:0]), // row number (0 = top)
.text(display_text), // text for one line
.text_length(text_length), // length of text
.start(display_write), // start writing
.eol(eol), // pad with spaces until end of line
.lcd_rs(lcd_rs), // LCD RS pin
.lcd_e(lcd_e), // enable pins for two LCD displays
.lcd_data(lcd_data), // LCD data, 4 bit bus
.ready(display_ready) // finished writing line on display. ready for next line
);
logic [63:0] instruction; // first word of instruction for selected pipeline stage
logic [15:0] instruction_pointer; // address of instruction for selected pipeline stage
logic valid; // valid output from current stage is ready
logic stalled; // current stage is stalled
logic [1:0] il; // instruction length
logic [2:0] mode; // format mode
logic [5:0] op1; // instruction op1 code
logic [1:0] op2; // instruction op2 code
logic M; // format M bit
logic [2:0] mode2; // format mode2
logic [2:0] mask; // mask register
logic [5:0] opj; // jump condition id
logic [6:0] opx; // instruction id
reg [1:0] category; // 00: multiformat, 01: single format, 10: jump
reg [6:0] opx2; // instruction id, calculated here
reg [2:0] format; // 1 - 5 means A - E
reg is_vector; // vector instruction
// convert 4-bit binary number to hexadecimal ascii code
function [7:0] nibble2ascii;
input [3:0] inp;
logic [7:0] a;
if (inp < 10) a = inp + 8'H30;
else a = inp + 8'H37;
return a;
endfunction
// multiplexer to select data from one pipeline stage
always_comb begin
case (row)
0: begin // fetch
instruction = fetch_instruction;
instruction_pointer = fetch_instruction_pointer;
opx = opx2;
valid = fetch_valid;
stalled = registerread_stall_predict | addrgen_stall_next | dataread_stall_predict;
end
1: begin // decoder
instruction = decoder_instruction;
instruction_pointer = decoder_instruction_pointer;
opx = opx2;
valid = decoder_valid;
stalled = registerread_stall_predict | addrgen_stall_next | dataread_stall_predict;
end
2: begin // register_read
instruction = registerread_instruction;
instruction_pointer = registerread_instruction_pointer;
opx = opx2;
valid = registerread_valid;
stalled = registerread_stall_predict | addrgen_stall_next | dataread_stall_predict | alu_stall_next | inout_stall_next | muldiv_stall_next;
end
3: begin // address generator
instruction = addrgen_instruction;
instruction_pointer = addrgen_instruction_pointer;
opx = opx2;
valid = addrgen_valid;
stalled = dataread_stall_predict | alu_stall_next | muldiv_stall_next | inout_stall_next;
end
4: begin // data read
instruction = dataread_instruction;
instruction_pointer = dataread_instruction_pointer;
opx = dataread_opx;
valid = dataread_valid;
stalled = dataread_stall_predict | alu_stall_next | muldiv_stall_next | inout_stall_next;
end
default: begin // alu
instruction = alu_instruction;
instruction_pointer = alu_instruction_pointer;
opx = alu_opx;
valid = alu_valid;
stalled = dataread_stall_predict;
end
endcase
il = instruction[`IL]; // instruction length
mode = instruction[`MODE]; // format mode
mode2 = instruction[`MODE2]; // format mode2
op1 = instruction[`OP1]; // instruction OP1
op2 = instruction[`OP2]; // instruction OP2
M = instruction[`M]; // format M bit
mask = instruction[`MASK]; // mask field
// get opj. This code is copied from dataread.sv
opj = 0;
if (il == 1) begin
opj = op1;
end else if (op1 == 0) begin // format 2.5.0A, 3.1.0A
opj = instruction[61:56]; // opj in byte 7
end else if (il == 2 && op1 == 7) begin // system call
opj = `IJ_SYSCALL;
end else if (op1 < 8) begin
opj = instruction[5:0];
end else begin
opj = 56; // unknown
end
end
// state machine for writing one line for each pipeline stage on LCD display
always_ff @(posedge clock) begin
// state control
if (state == 0) begin
// state 0: idle
display_write <= 0;
row <= 0;
if (clock_enable) begin
delay <= 3;
state <= 1;
end
end else if (state == 1) begin
// state 1: set text. send display_write pulse
if (delay < 2) display_write <= 1;
else display_write <= 0;
if (delay > 0) begin
delay <= delay - 1;
end else begin
state <= 2;
delay <= 3;
end
end else if (state == 2) begin
// state 2: wait for display_ready
if (delay > 0) begin
delay <= delay - 1;
end else begin
if (display_ready) state <= 3;
end
end else begin
// state 3: row++
if (row < 7) begin
row <= row + 1;
state <= 1;
delay <= 3;
end else begin
row <= 0;
state <= 0;
end
end
// compose text for current row
if (state == 1 || state == 2) begin
if (row < 6) begin
// First 6 rows: fetch, decode, decodewait, addrgen, addrwait, alu
case (row) // Indicate pipeline stage
0: display_text[0] <= "F"; // fetch
1: display_text[0] <= "D"; // decode
2: display_text[0] <= "R"; // register read
3: display_text[0] <= "A"; // address
4: display_text[0] <= "d"; // data read
5: display_text[0] <= "X"; // alu (Execute)
endcase
display_text[1] <= " ";
//if (1/*valid*/) begin
// write lower 4 digits of instruction_pointer
display_text[2] <= nibble2ascii(instruction_pointer[15:12]);
display_text[3] <= nibble2ascii(instruction_pointer[11:8]);
display_text[4] <= nibble2ascii(instruction_pointer[7:4]);
display_text[5] <= nibble2ascii(instruction_pointer[3:0]);
display_text[6] <= stalled ? "#" : " ";
if (!valid) begin
display_text[7] <= "-";
text_length <= 8;
end else begin
// write il.mode.op1, Format, Operand type, instruction name
display_text[7] <= nibble2ascii(il);
display_text[8] <= ".";
if (mode < 2 && M && (!il[0] || !mode[0])) begin
display_text[9] <= nibble2ascii(mode | 4'b1000);
end else begin
display_text[9] <= nibble2ascii(mode);
end
// write format letter
display_text[10] <= {5'b01000,format}; // format letter A - E
display_text[11] <= " ";
// write oprand type: bhwdqFDQ
if (opx == `II_NOP) begin
display_text[12] <= " ";
end else if (is_vector) begin
case (instruction[`OT])
0: display_text[12] <= "b"; // byte (8 bit)
1: display_text[12] <= "h"; // half word (16 bit)
2: display_text[12] <= "w"; // word (32 bit)
3: display_text[12] <= "d"; // double word (64 bit)
4: display_text[12] <= "q"; // quad word (128 bit)
5: display_text[12] <= "F"; // float single precision (32 bit)
6: display_text[12] <= "D"; // double precision (64 bit)
7: display_text[12] <= "Q"; // quadruple precision (128 bit)
endcase
end else begin
case (instruction[14:13]) // two bit operand type for non-vector instructions
0: display_text[12] <= "b"; // byte (8 bit)
1: display_text[12] <= "h"; // half word (16 bit)
2: display_text[12] <= "w"; // word (32 bit)
3: display_text[12] <= "d"; // double word (64 bit)
endcase
end
display_text[13] <= " ";
// write name of instruction
for (int i = 0; i < 6; i++) begin
display_text[i+14] <= instruction_name[i];
end
text_length <= 20;
end
if (row == 0 && fetch_jump) begin
// jump, call or return bypassign pipeline
if (fetch_call_e) begin
display_text[0] <= "C";
display_text[1] <= "a";
display_text[2] <= "l";
display_text[3] <= "l";
text_length <= 4;
end else if (fetch_return_e) begin
display_text[0] <= "R";
display_text[1] <= "e";
display_text[2] <= "t";
display_text[3] <= "u";
display_text[4] <= "r";
display_text[5] <= "n";
text_length <= 6;
end else begin
display_text[0] <= "J";
display_text[1] <= "u";
display_text[2] <= "m";
display_text[3] <= "p";
text_length <= 4;
end
end
column <= 0;
eol <= 1;
end else if (row == 6) begin
// row 6: operands
display_text[0] <= ":"; // operands
display_text[1] <= " ";
display_text[2] <= nibble2ascii(opr1_val[15:12]);
display_text[3] <= nibble2ascii(opr1_val[11:8]);
display_text[4] <= nibble2ascii(opr1_val[7:4]);
display_text[5] <= nibble2ascii(opr1_val[3:0]);
display_text[6] <= " ";
display_text[7] <= nibble2ascii(opr2_val[15:12]);
display_text[8] <= nibble2ascii(opr2_val[11:8]);
display_text[9] <= nibble2ascii(opr2_val[7:4]);
display_text[10] <= nibble2ascii(opr2_val[3:0]);
display_text[11] <= " ";
display_text[12] <= nibble2ascii(opr3_val[15:12]);
display_text[13] <= nibble2ascii(opr3_val[11:8]);
display_text[14] <= nibble2ascii(opr3_val[7:4]);
display_text[15] <= nibble2ascii(opr3_val[3:0]);
display_text[16] <= " ";
text_length <= 17;
column <= 0;
eol <= 1;
end else if (row == 7 & valid) begin
// row 7: result
column <= 0;
eol <= 1;
display_text[0] <= "="; // result
display_text[1] <= " ";
if (category == `CAT_JUMP) begin // result of jump instruction
display_text[2] <= nibble2ascii(alu_result[15:12]);
display_text[3] <= nibble2ascii(alu_result[11:8]);
display_text[4] <= nibble2ascii(alu_result[7:4]);
display_text[5] <= nibble2ascii(alu_result[3:0]);
display_text[6] <= " ";
if (alu_jump) begin // jump taken
display_text[7] <= "j";
display_text[8] <= "u";
display_text[9] <= "m";
display_text[10] <= "p";
display_text[11] <= " "; // write target address:
display_text[12] <= nibble2ascii(alu_jump_pointer[15:12]);
display_text[13] <= nibble2ascii(alu_jump_pointer[11:8]);
display_text[14] <= nibble2ascii(alu_jump_pointer[7:4]);
display_text[15] <= nibble2ascii(alu_jump_pointer[3:0]);
text_length <= 16;
end else begin // jump not taken
display_text[7] <= "n";
display_text[8] <= "o";
display_text[9] <= " ";
display_text[10] <= "j";
display_text[11] <= "u";
display_text[12] <= "m";
display_text[13] <= "p";
text_length <= 14;
end
end else if (write_en2) begin // result from muldiv or other unit
// to do: what to do if there are results from alu and muldiv simultaneously?
display_text[0] <= "m";
display_text[1] <= "u";
display_text[2] <= "l";
display_text[3] <= "d";
display_text[4] <= "i";
display_text[5] <= "v";
display_text[6] <= "=";
display_text[7] <= nibble2ascii(writeport2[31:28]);
display_text[8] <= nibble2ascii(writeport2[27:24]);
display_text[9] <= nibble2ascii(writeport2[23:20]);
display_text[10] <= nibble2ascii(writeport2[19:16]);
display_text[11] <= nibble2ascii(writeport2[15:12]);
display_text[12] <= nibble2ascii(writeport2[11:8]);
display_text[13] <= nibble2ascii(writeport2[7:4]);
display_text[14] <= nibble2ascii(writeport2[3:0]);
end else begin // 32 bit result of alu non-jump instruction
display_text[2] <= nibble2ascii(alu_result[31:28]);
display_text[3] <= nibble2ascii(alu_result[27:24]);
display_text[4] <= nibble2ascii(alu_result[23:20]);
display_text[5] <= nibble2ascii(alu_result[19:16]);
display_text[6] <= nibble2ascii(alu_result[15:12]);
display_text[7] <= nibble2ascii(alu_result[11:8]);
display_text[8] <= nibble2ascii(alu_result[7:4]);
display_text[9] <= nibble2ascii(alu_result[3:0]);
if (instruction[`MASK] < 7) begin
// write bit 0 of mask
display_text[10] <= " ";
display_text[11] <= "m";
display_text[12] <= "0" | mask_val;
text_length <= 13;
end else begin // no mask
text_length <= 10;
end
end
end else begin
// row 7, not valid
display_text[0] <= "-";
text_length <= 1;
column <= 0;
eol <= 1;
end
end
end
// parallel decoding if instruction is not completely decoded yet
// calculate opx if not available
always_ff @(posedge clock) begin
// save inputs to alu stage for next clock cycle because they are not output from alu
if (clock_enable) begin
alu_instruction <= dataread_instruction; // first word of instruction currently in ALU
alu_instruction_pointer <= dataread_instruction_pointer;// address of instruction currently in ALU
alu_opx <= dataread_opx; // operation ID in alu
// mirror operand catching in ALU stage
if (dataread_operand1[`RB]) begin // value missing
if (dataread_operand1[`TAG_WIDTH-1:0] == write_tag1) begin
opr1_val <= alu_result; // got value from result bus 1
end else if (write_en2 && dataread_operand1[`TAG_WIDTH-1:0] == write_tag2) begin
opr1_val <= writeport2; // obtained from result bus 2
end else begin
opr1_val <= 0;
end
end else begin
opr1_val <= dataread_operand1;
end
if (dataread_opr2_from_ram) begin
opr2_val <= ram_data_in;
end else if (dataread_operand2[`RB]) begin // value missing
if (dataread_operand2[`TAG_WIDTH-1:0] == write_tag1) begin
opr2_val <= alu_result; // got value from result bus 1
end else if (write_en2 && dataread_operand2[`TAG_WIDTH-1:0] == write_tag2) begin
opr2_val <= writeport2; // obtained from result bus 2
end else begin
opr2_val <= 0;
end
end else begin
opr2_val <= dataread_operand2;
end
if (dataread_opr3_from_ram) begin
opr3_val <= ram_data_in;
end else if (dataread_operand3[`RB]) begin // value missing
if (dataread_operand3[`TAG_WIDTH-1:0] == write_tag1) begin
opr3_val <= alu_result; // got value from result bus 1
end else if (write_en2 && dataread_operand3[`TAG_WIDTH-1:0] == write_tag2) begin
opr3_val <= writeport2; // obtained from result bus 2
end else begin
opr3_val <= 0;
end
end else begin
opr3_val <= dataread_operand3;
end
if (dataread_mask_val[`MASKSZ]) begin // value missing
if (dataread_mask_val[`TAG_WIDTH-1:0] == write_tag1) begin
mask_val <= alu_result; // got value from result bus 1
end else if (write_en2 && dataread_mask_val[`TAG_WIDTH-1:0] == write_tag2) begin
mask_val <= writeport2[31:0]; // obtained from result bus 2
end else begin
mask_val <= 0;
end
end else begin // value available
mask_val <= dataread_mask_val[`TAG_WIDTH-1:0];
end
end
if (state == 1 || state == 2) begin
// detect category, 00: multiformat, 01: single format, 10: jump
// this code is copied from decoder.sv
if (il == 0) begin // format 0.x
category <= `CAT_MULTI;
end else if (il == 1) begin // format 1.x
if (mode == 6 || mode == 7) begin // format 1.6 and 1.7
category <= `CAT_JUMP;
end else begin
category <= `CAT_SINGLE;
end
end else if (il >= 2 && ((mode == 0 && !M) || mode == 2) && op2 != 0 && (mode2 != 5 || il == 3)) begin // format 2.0.x, 2.2.x, 3.0.x, 3.2.x, op2 > 0
category <= `CAT_SINGLE;
end else if (il == 2) begin // format 2.x
if (mode == 1 && M) begin // format 2.9
category <= `CAT_SINGLE;
end else if (mode == 6 || mode == 7) begin// format 2.6 - 2.7
category <= `CAT_SINGLE;
end else if (mode == 5) begin // format 2.5
if (op1 < 8) begin
category <= `CAT_JUMP;
end else begin
category <= `CAT_SINGLE;
end
end else begin
category <= `CAT_MULTI;
end
end else begin // format 3.x
if (mode == 1) begin // format 3.1
if (op1 < 8) begin
category <= `CAT_JUMP;
end else begin
category <= `CAT_SINGLE;
end
end else begin
category <= `CAT_MULTI;
end
end
// detect instruction format: A, B, C, D, or E indicated as 1 - 5
if (il == 0) begin // format 0.x
if (mode == 1 || mode == 3 || mode == 7) begin
format <= 2; // B: 0.1, 0.3, 0.7, 0.9
end else begin
format <= 1; // A: 0.0, 0.2, 0.4, 0.5, 0.6, 0.8
end
end else if (il == 1) begin // format 1.x
if (mode == 3 || (mode == 0 && M)) begin
format <= 2; // B: 1.3, 1.8
end else if (mode == 6) begin // 1.6 jump instructions
if (op1 == `II_RETURN) format = 3; // C: return
else if (op1 >= `II_JUMP_RELATIVE) begin
format <= 1; // A: relative jump, sys_call
end else format <= 2; // B
end else if (mode == 7) begin // 1.7 jump instructions
if (op1 < 16) format <= 4; // 24-bit jump/call, format D
else format <= 3; // other jumps, format C
end else if (mode == 1 || mode == 4) begin
format <= 3; // C: 1.1, 1.4, 1.7
end else begin
format <= 1; // A: 1.0, 1.2
end
end else if (il == 2) begin // format 2.x
if ((mode == 0 && M == 0) || mode == 2) begin
format <= 5; // E: 2.0.x, 2.2.x
end else if (mode == 5) begin // format 2.5 mixed
if (op1 == 0) begin
format <= `FORMAT_A;
end else if (op1 >= 4 && op1 <= 8) begin
format <= `FORMAT_C; // 2.5 2-4 jump uses format C
end else if (op1 >= `II_25_VECT) begin
format <= 1; // A: 2.5 32-63 vector instructions
end else begin
format <= 2; // B: other jump and miscellaneous instructions
end
end else begin
format <= 1; // A: other jump and miscellaneous instructions
end
end else begin // format 3.x
if ((mode == 0 && M == 0) || mode == 2) begin
format <= 5; // E: 3.0.x, 3.2.x
end else if (mode == 1) begin // 3.1 mixed
if (op1 < 8) begin // jump instructions
format <= 2; // B
end else begin
format <= 1; // A
end
end else begin
format <= 1; // A
end
end
end
// is this a vector instruction?
if (il == 2 && mode == 5) begin // 2.5 mixed
is_vector <= op1 >= `II_25_VECT;
end else if (il == 3 && mode == 1) begin // 3.1 mixed
is_vector <= op1 >= `II_31_VECT;
end else if (category == `CAT_JUMP) begin
if (il == 1 && mode == 7) is_vector <= 0; // jump instructions format 1.7C
is_vector <= M; // all other jump instructions
end else if (mode < 2) begin
is_vector <= 0;
end else begin
is_vector <= 1;
end
// calculate opx.
// This code is copied from addresswait.sv
if (state == 1 || state == 2) begin
// convert op1 to opx: operation id in execution unit
opx2 = `IX_UNDEF; // default is undefined
if (category == `CAT_MULTI) begin
opx2 = op1; // mostly same id for multiformat instructions
if (op1 == `II_SUB_REV) opx2 = `II_SUB; // operands have been swapped
if (op1 == `II_DIV_REV) opx2 = `II_DIV; // operands have been swapped
end else if (il == 1 && mode == 1) begin
// format 1.1 C. single format with 16 bit constant
case (op1[5:1])
`II_ADD11 >> 1: opx2 = `II_ADD;
`II_MUL11 >> 1: opx2 = `II_MUL;
`II_ADDSHIFT16_11 >> 1: opx2 = `II_ADD;
`II_SHIFT_MOVE_11 >> 1: opx2 = `II_MOVE;
`II_SHIFT_ADD_11 >> 1: opx2 = `II_ADD;
`II_SHIFT_AND_11 >> 1: opx2 = `II_AND;
`II_SHIFT_OR_11 >> 1: opx2 = `II_OR;
`II_SHIFT_XOR_11 >> 1: opx2 = `II_XOR;
default: opx2 = `IX_UNDEF;
endcase
if (op1 <= `II_MOVE11_LAST) opx2 = `II_MOVE; // five different move instructions
end else if (il == 1 && mode == 0 && M) begin
// format 1.8 B. single format with 8 bit constant
case (op1)
`II_SHIFT_ABS18: opx2 = `IX_ABS;
`II_BITSCAN_18: opx2 = `IX_BIT_SCAN;
`II_ROUNDP2_18: opx2 = `IX_ROUNDP2;
`II_POPCOUNT_18: opx2 = `IX_POPCOUNT;
`II_READ_SPEC18: opx2 = `IX_READ_SPEC;
`II_WRITE_SPEC18: opx2 = `IX_WRITE_SPEC;
`II_READ_CAP18: opx2 = `IX_READ_CAPABILITIES;
`II_WRITE_CAP18: opx2 = `IX_WRITE_CAPABILITIES;
`II_READ_PERF18: opx2 = `IX_READ_PERF;
`II_READ_PERFS18: opx2 = `IX_READ_PERF;
`II_READ_SYS18: opx2 = `IX_READ_SYS;
`II_WRITE_SYS18: opx2 = `IX_WRITE_SYS;
`II_INPUT_18: opx2 = `IX_INPUT;
`II_OUTPUT_18: opx2 = `IX_OUTPUT;
endcase
end else if (il == 2 && (mode == 0 && !M || mode == 2) && mode2 == 6) begin
// format 2.0.6 and 2.2.6
if (op1 == `II_TRUTH_TAB3 && op2 == `II2_TRUTH_TAB3) opx2 = `IX_TRUTH_TAB3;
end else if (il == 2 && mode == 0 && !M && mode2 == 7) begin
// format 2.0.7E. single format
if (op1 == `II_MOVE_BITS && op2 == `II2_MOVE_BITS) opx2 = `IX_MOVE_BITS1;
end else if (il == 2 && mode == 1 && M) begin
// format 2.9A. single format with 32 bit constant
case (op1)
`II_MOVE_HI_29: opx2 = `II_MOVE; // shifted left by 32 here. just store result
`II_INSERT_HI_29: opx2 = `IX_INSERT_HI;
`II_ADDU_29: opx2 = `II_ADD;
`II_SUBU_29: opx2 = `II_SUB;
`II_ADD_HI_29: opx2 = `II_ADD;
`II_AND_HI_29: opx2 = `II_SUB;
`II_OR_HI_29: opx2 = `II_OR;
`II_XOR_HI_29: opx2 = `II_XOR;
`II_ADDRESS_29: opx2 = `IX_ADDRESS; // address instruction. resolved in this state. just store result
endcase
end
end
// get name of instruction
if (state == 1 || state == 2) begin
// default characters are space if not specified below
instruction_name[0] <= " ";
instruction_name[1] <= " ";
instruction_name[2] <= " ";
instruction_name[3] <= " ";
instruction_name[4] <= " ";
instruction_name[5] <= " ";
if (format == 4) begin // format D. 24-bit jump or call
if (op1 < 8) begin
instruction_name[0] <= "J";
instruction_name[1] <= "U";
instruction_name[2] <= "M";
instruction_name[3] <= "P";
end else begin
instruction_name[0] <= "C";
instruction_name[1] <= "A";
instruction_name[2] <= "L";
instruction_name[3] <= "L";
end
end else if (category == `CAT_JUMP) begin
case (opj)
`IJ_SUB_JZ: begin
instruction_name[0] <= "-";
instruction_name[1] <= "J";
instruction_name[2] <= "Z";
end
`IJ_SUB_JZ+1: begin
instruction_name[0] <= "-";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "Z";
end
`IJ_SUB_JNEG: begin
instruction_name[0] <= "-";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
end
`IJ_SUB_JNEG+1: begin
instruction_name[0] <= "-";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "N";
end
`IJ_SUB_JPOS: begin
instruction_name[0] <= "-";
instruction_name[1] <= "J";
instruction_name[2] <= "P";
end
`IJ_SUB_JPOS+1: begin
instruction_name[0] <= "-";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "P";
end
`IJ_SUB_JOVFLW: begin
instruction_name[0] <= "-";
instruction_name[1] <= "J";
instruction_name[2] <= "O";
end
`IJ_SUB_JOVFLW+1: begin
instruction_name[0] <= "-";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "O";
end
`IJ_SUB_JBORROW: begin
instruction_name[0] <= "-";
instruction_name[1] <= "J";
instruction_name[2] <= "C";
end
`IJ_SUB_JBORROW+1: begin
instruction_name[0] <= "-";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "C";
end
`IJ_ADD_JZ: begin
instruction_name[0] <= "+";
instruction_name[1] <= "J";
instruction_name[2] <= "Z";
end
`IJ_ADD_JZ+1: begin
instruction_name[0] <= "+";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "Z";
end
`IJ_ADD_JNEG: begin
instruction_name[0] <= "+";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
end
`IJ_ADD_JNEG+1: begin
instruction_name[0] <= "+";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "N";
end
`IJ_ADD_JPOS: begin
instruction_name[0] <= "+";
instruction_name[1] <= "J";
instruction_name[2] <= "P";
end
`IJ_ADD_JPOS+1: begin
instruction_name[0] <= "+";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "P";
end
`IJ_ADD_JOVFLW: begin
instruction_name[0] <= "+";
instruction_name[1] <= "J";
instruction_name[2] <= "O";
end
`IJ_ADD_JOVFLW+1: begin
instruction_name[0] <= "+";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "O";
end
`IJ_ADD_JCARRY: begin
instruction_name[0] <= "+";
instruction_name[1] <= "J";
instruction_name[2] <= "C";
end
`IJ_ADD_JCARRY+1: begin
instruction_name[0] <= "+";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "C";
end
`IJ_AND_JZ: begin
instruction_name[0] <= "&";
instruction_name[1] <= "J";
instruction_name[2] <= "Z";
end
`IJ_AND_JZ+1: begin
instruction_name[0] <= "&";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "Z";
end
`IJ_OR_JZ: begin
instruction_name[0] <= "|";
instruction_name[1] <= "J";
instruction_name[2] <= "Z";
end
`IJ_OR_JZ+1: begin
instruction_name[0] <= "|";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "Z";
end
`IJ_XOR_JZ: begin
instruction_name[0] <= "^";
instruction_name[1] <= "J";
instruction_name[2] <= "Z";
end
`IJ_XOR_JZ+1: begin
instruction_name[0] <= "^";
instruction_name[1] <= "J";
instruction_name[2] <= "N";
instruction_name[3] <= "Z";
end
`IJ_COMPARE_JEQ: begin
instruction_name[0] <= "J";
instruction_name[1] <= "=";
instruction_name[2] <= "=";
end
`IJ_COMPARE_JEQ+1: begin
instruction_name[0] <= "J";
instruction_name[1] <= "!";
instruction_name[2] <= "=";
end
`IJ_COMPARE_JSB: begin
instruction_name[0] <= "J";
instruction_name[1] <= "s";
instruction_name[2] <= "<";
end
`IJ_COMPARE_JSB+1: begin
instruction_name[0] <= "J";
instruction_name[1] <= "s";
instruction_name[2] <= ">";
instruction_name[3] <= "=";
end
`IJ_COMPARE_JSA: begin
instruction_name[0] <= "J";
instruction_name[1] <= "s";
instruction_name[2] <= ">";
end
`IJ_COMPARE_JSA+1: begin
instruction_name[0] <= "J";
instruction_name[1] <= "s";
instruction_name[2] <= "<";
instruction_name[3] <= "=";
end
`IJ_COMPARE_JUB: begin
instruction_name[0] <= "J";
instruction_name[1] <= "u";
instruction_name[2] <= "<";
end
`IJ_COMPARE_JUB+1: begin
instruction_name[0] <= "J";
instruction_name[1] <= "u";
instruction_name[2] <= ">";
instruction_name[3] <= "=";
end
`IJ_COMPARE_JUA: begin
instruction_name[0] <= "J";
instruction_name[1] <= "u";
instruction_name[2] <= ">";
end
`IJ_COMPARE_JUA+1: begin
instruction_name[0] <= "J";
instruction_name[1] <= "u";
instruction_name[2] <= "<";
instruction_name[3] <= "=";
end
`IJ_TEST_BIT_JTRUE: begin
instruction_name[0] <= "T";
instruction_name[1] <= "B";
instruction_name[2] <= "I";
instruction_name[3] <= "T";
instruction_name[4] <= "1";
end
`IJ_TEST_BIT_JTRUE+1: begin
instruction_name[0] <= "T";
instruction_name[1] <= "B";
instruction_name[2] <= "I";
instruction_name[3] <= "T";
instruction_name[4] <= "0";
end
`IJ_TEST_BITS_AND: begin
instruction_name[0] <= "T";
instruction_name[1] <= "B";
instruction_name[2] <= "I";
instruction_name[3] <= "T";
instruction_name[4] <= "&";
end
`IJ_TEST_BITS_AND+1: begin
instruction_name[0] <= "T";
instruction_name[1] <= "B";
instruction_name[2] <= "I";
instruction_name[3] <= "T";
instruction_name[4] <= "N";
instruction_name[5] <= "&";
end
`IJ_TEST_BITS_OR: begin
instruction_name[0] <= "T";
instruction_name[1] <= "B";
instruction_name[2] <= "I";
instruction_name[3] <= "T";
instruction_name[4] <= "|";
end
`IJ_TEST_BITS_OR+1: begin
instruction_name[0] <= "T";
instruction_name[1] <= "B";
instruction_name[2] <= "I";
instruction_name[3] <= "T";
instruction_name[4] <= "N";
instruction_name[5] <= "|";
end
`IJ_INC_COMP_JBELOW: begin
instruction_name[0] <= "I";
instruction_name[1] <= "N";
instruction_name[2] <= "C";
instruction_name[3] <= "J";
instruction_name[4] <= "<";
end
`IJ_INC_COMP_JBELOW+1: begin
instruction_name[0] <= "I";
instruction_name[1] <= "N";
instruction_name[2] <= "C";
instruction_name[3] <= "J";
instruction_name[4] <= ">";
instruction_name[5] <= "=";
end
`IJ_INC_COMP_JABOVE: begin
instruction_name[0] <= "I";
instruction_name[1] <= "N";
instruction_name[2] <= "C";
instruction_name[3] <= "J";
instruction_name[4] <= ">";
end
`IJ_INC_COMP_JABOVE+1: begin
instruction_name[0] <= "I";
instruction_name[1] <= "N";
instruction_name[2] <= "C";
instruction_name[3] <= "J";
instruction_name[4] <= "<";
instruction_name[5] <= "=";
end
`IJ_SUB_MAXLEN_JPOS: begin
instruction_name[0] <= "L";
instruction_name[1] <= "O";
instruction_name[2] <= "O";
instruction_name[3] <= "P";
instruction_name[4] <= "-";
end
`IJ_SUB_MAXLEN_JPOS+1: begin
instruction_name[0] <= "L";
instruction_name[1] <= "O";
instruction_name[2] <= "O";
instruction_name[3] <= "P";
instruction_name[4] <= "+";
end
`IJ_RETURN: begin // also sys_return
instruction_name[0] <= "R";
instruction_name[1] <= "E";
instruction_name[2] <= "T";
instruction_name[3] <= "U";
instruction_name[4] <= "R";
instruction_name[5] <= "N";
end
`IJ_SYSCALL: begin // also trap
if (mode == 7) begin // trap
instruction_name[0] <= "T";
instruction_name[1] <= "R";
instruction_name[2] <= "A";
instruction_name[3] <= "P";
end else begin// sys_call
instruction_name[0] <= "S";
instruction_name[1] <= "Y";
instruction_name[2] <= "S";
instruction_name[3] <= "C";
instruction_name[4] <= "A";
instruction_name[5] <= "L";
end
end
default:
if (opj >= `IJ_JUMP_INDIRECT_MEM) begin
if (opj[0]) begin // indirect call
instruction_name[0] <= "C";
instruction_name[1] <= "A";
instruction_name[2] <= "L";
instruction_name[3] <= "L";
instruction_name[4] <= "i";
end else begin // indirect jump
instruction_name[0] <= "J";
instruction_name[1] <= "U";
instruction_name[2] <= "M";
instruction_name[3] <= "P";
instruction_name[4] <= "i";
end
end else begin
// unknown jump instruction
instruction_name[0] <= "J";
instruction_name[1] <= "U";
instruction_name[2] <= "M";
instruction_name[3] <= "P";
instruction_name[4] <= "?";
end
endcase
end else begin
// all other instructions than jump
case (opx)
`II_NOP: begin
instruction_name[0] <= "N";
instruction_name[1] <= "O";
instruction_name[2] <= "P";
end
`II_MOVE: begin
instruction_name[0] <= "M";
instruction_name[1] <= "O";
instruction_name[2] <= "V";
instruction_name[3] <= "E";
end
`II_STORE: begin
instruction_name[0] <= "S";
instruction_name[1] <= "T";
instruction_name[2] <= "O";
instruction_name[3] <= "R";
instruction_name[4] <= "E";
end
`II_SIGN_EXTEND: begin
instruction_name[0] <= "S";
instruction_name[1] <= "I";
instruction_name[2] <= "G";
instruction_name[3] <= "H";
instruction_name[4] <= "E";
end
`II_SIGN_EXTEND_ADD: begin
instruction_name[0] <= "S";
instruction_name[1] <= "I";
instruction_name[2] <= "G";
instruction_name[3] <= "N";
instruction_name[4] <= "E";
instruction_name[5] <= "+";
end
`II_COMPARE: begin
instruction_name[0] <= "C";
instruction_name[1] <= "O";
instruction_name[2] <= "M";
instruction_name[3] <= "P";
end
`II_ADD: begin
instruction_name[0] <= "A";
instruction_name[1] <= "D";
instruction_name[2] <= "D";
end
`II_SUB: begin
instruction_name[0] <= "S";
instruction_name[1] <= "U";
instruction_name[2] <= "B";
end
`II_MUL, `II_MUL_HI, `II_MUL_HI_U: // II_MUL_EX, II_MUL_EX_U
begin
instruction_name[0] <= "M";
instruction_name[1] <= "U";
instruction_name[2] <= "L";
end
`II_DIV, `II_DIV_U: begin
instruction_name[0] <= "D";
instruction_name[1] <= "I";
instruction_name[2] <= "V";
end
`II_REM, `II_REM_U: begin
instruction_name[0] <= "R";
instruction_name[1] <= "E";
instruction_name[2] <= "M";
end
`II_MIN, `II_MIN_U: begin
instruction_name[0] <= "M";
instruction_name[1] <= "I";
instruction_name[2] <= "N";
end
`II_MAX, `II_MAX_U: begin
instruction_name[0] <= "M";
instruction_name[1] <= "A";
instruction_name[2] <= "X";
end
`II_AND: begin
instruction_name[0] <= "A";
instruction_name[1] <= "N";
instruction_name[2] <= "D";
end
`II_OR: begin
instruction_name[0] <= "O";
instruction_name[1] <= "R";
end
`II_XOR: begin
instruction_name[0] <= "X";
instruction_name[1] <= "O";
instruction_name[2] <= "R";
end
`II_SHIFT_LEFT: begin // also mul_2pow
instruction_name[0] <= "S";
instruction_name[1] <= "H";
instruction_name[2] <= "L";
end
`II_ROTATE: begin
instruction_name[0] <= "R";
instruction_name[1] <= "O";
instruction_name[2] <= "T";
end
`II_SHIFT_RIGHT_S, `II_SHIFT_RIGHT_U: begin
instruction_name[0] <= "S";
instruction_name[1] <= "H";
instruction_name[2] <= "R";
end
`II_SET_BIT: begin
instruction_name[0] <= "S";
instruction_name[1] <= "E";
instruction_name[2] <= "T";
instruction_name[3] <= "b";
end
`II_CLEAR_BIT: begin
instruction_name[0] <= "C";
instruction_name[1] <= "L";
instruction_name[2] <= "E";
instruction_name[3] <= "A";
instruction_name[4] <= "R";
instruction_name[5] <= "b";
end
`II_TOGGLE_BIT: begin
instruction_name[0] <= "T";
instruction_name[1] <= "O";
instruction_name[2] <= "G";
instruction_name[3] <= "G";
instruction_name[4] <= "L";
instruction_name[5] <= "b";
end
`II_TEST_BIT: begin
instruction_name[0] <= "T";
instruction_name[1] <= "E";
instruction_name[2] <= "S";
instruction_name[3] <= "T";
instruction_name[4] <= "b";
end
`II_TEST_BITS_AND: begin
instruction_name[0] <= "T";
instruction_name[1] <= "E";
instruction_name[2] <= "S";
instruction_name[3] <= "T";
instruction_name[4] <= "b";
instruction_name[5] <= "&";
end
`II_TEST_BITS_OR: begin
instruction_name[0] <= "T";
instruction_name[1] <= "E";
instruction_name[2] <= "S";
instruction_name[3] <= "T";
instruction_name[4] <= "b";
instruction_name[5] <= "|";
end
`II_ADD_FLOAT16: begin
instruction_name[0] <= "A";
instruction_name[1] <= "D";
instruction_name[2] <= "D";
instruction_name[3] <= "h";
end
`II_SUB_FLOAT16: begin
instruction_name[0] <= "S";
instruction_name[1] <= "U";
instruction_name[2] <= "B";
instruction_name[3] <= "h";
end
`II_MUL_FLOAT16: begin
instruction_name[0] <= "M";
instruction_name[1] <= "U";
instruction_name[2] <= "L";
instruction_name[3] <= "h";
end
`II_MUL_ADD_FLOAT16: begin
instruction_name[0] <= "M";
instruction_name[1] <= "U";
instruction_name[2] <= "L";
instruction_name[3] <= "A";
instruction_name[4] <= "h";
end
`II_MUL_ADD, `II_MUL_ADD2: begin
instruction_name[0] <= "M";
instruction_name[1] <= "U";
instruction_name[2] <= "L";
instruction_name[3] <= "A";
end
`II_ADD_ADD: begin
instruction_name[0] <= "A";
instruction_name[1] <= "D";
instruction_name[2] <= "D";
instruction_name[3] <= "A";
instruction_name[4] <= "D";
instruction_name[5] <= "D";
end
`II_SELECT_BITS: begin
instruction_name[0] <= "S";
instruction_name[1] <= "E";
instruction_name[2] <= "L";
instruction_name[3] <= "E";
instruction_name[4] <= "C";
instruction_name[5] <= "T";
end
`II_FUNNEL_SHIFT: begin
instruction_name[0] <= "F";
instruction_name[1] <= "U";
instruction_name[2] <= "N";
instruction_name[3] <= "N";
instruction_name[4] <= "E";
instruction_name[5] <= "L";
end
`IX_ABS: begin
instruction_name[0] <= "A";
instruction_name[1] <= "B";
instruction_name[2] <= "S";
end
`IX_BIT_SCAN: begin
instruction_name[0] <= "B";
instruction_name[1] <= "S";
instruction_name[2] <= "C";
instruction_name[3] <= "A";
instruction_name[4] <= "N";
end
`IX_ROUNDP2: begin
instruction_name[0] <= "R";
instruction_name[1] <= "N";
instruction_name[2] <= "D";
instruction_name[3] <= "P";
instruction_name[4] <= "2";
end
`IX_POPCOUNT: begin
instruction_name[0] <= "P";
instruction_name[1] <= "O";
instruction_name[2] <= "P";
instruction_name[3] <= "C";
instruction_name[4] <= "N";
instruction_name[5] <= "T";
end
`IX_READ_SPEC: begin
instruction_name[0] <= "R";
instruction_name[1] <= "D";
instruction_name[2] <= " ";
instruction_name[3] <= "S";
instruction_name[4] <= "P";
instruction_name[5] <= "C";
end
`IX_WRITE_SPEC: begin
instruction_name[0] <= "W";
instruction_name[1] <= "R";
instruction_name[2] <= " ";
instruction_name[3] <= "S";
instruction_name[4] <= "P";
instruction_name[5] <= "C";
end
`IX_READ_CAPABILITIES: begin
instruction_name[0] <= "R";
instruction_name[1] <= "D";
instruction_name[2] <= " ";
instruction_name[3] <= "C";
instruction_name[4] <= "A";
instruction_name[5] <= "P";
end
`IX_WRITE_CAPABILITIES: begin
instruction_name[0] <= "W";
instruction_name[1] <= "R";
instruction_name[2] <= " ";
instruction_name[3] <= "C";
instruction_name[4] <= "A";
instruction_name[5] <= "P";
end
`IX_READ_PERF, `IX_READ_PERFS: begin
instruction_name[0] <= "R";
instruction_name[1] <= "D";
instruction_name[2] <= " ";
instruction_name[3] <= "P";
instruction_name[4] <= "E";
instruction_name[5] <= "R";
end
`IX_READ_SYS: begin
instruction_name[0] <= "R";
instruction_name[1] <= "D";
instruction_name[2] <= " ";
instruction_name[3] <= "S";
instruction_name[4] <= "Y";
instruction_name[5] <= "S";
end
`IX_WRITE_SYS: begin
instruction_name[0] <= "W";
instruction_name[1] <= "R";
instruction_name[2] <= " ";
instruction_name[3] <= "S";
instruction_name[4] <= "Y";
instruction_name[5] <= "S";
end
`IX_MOVE_BITS1, `IX_MOVE_BITS2: begin
instruction_name[0] <= "M";
instruction_name[1] <= "O";
instruction_name[2] <= "V";
instruction_name[3] <= "b";
end
`IX_SHIFT32: begin
instruction_name[0] <= "<";
instruction_name[1] <= "<";
instruction_name[2] <= "3";
instruction_name[3] <= "2";
end
`IX_INSERT_HI: begin
instruction_name[0] <= "I";
instruction_name[1] <= "N";
instruction_name[2] <= "S";
instruction_name[3] <= "h";
instruction_name[4] <= "i";
end
`IX_ADDRESS: begin
instruction_name[0] <= "A";
instruction_name[1] <= "D";
instruction_name[2] <= "D";
instruction_name[3] <= "R";
end
`IX_TRUTH_TAB3: begin
instruction_name[0] <= "T";
instruction_name[1] <= "T";
instruction_name[2] <= "A";
instruction_name[3] <= "B";
instruction_name[4] <= "3";
end
`IX_INPUT: begin
instruction_name[0] <= "I";
instruction_name[1] <= "N";
instruction_name[2] <= "P";
instruction_name[3] <= "U";
instruction_name[4] <= "T";
end
`IX_OUTPUT: begin
instruction_name[0] <= "O";
instruction_name[1] <= "U";
instruction_name[2] <= "T";
instruction_name[3] <= "P";
instruction_name[4] <= "U";
instruction_name[5] <= "T";
end
default: begin
// unknown instruction
instruction_name[0] <= "?";
instruction_name[1] <= "?";
instruction_name[2] <= "?";
end
endcase
end
end
end
endmodule
Go to most recent revision | Compare with Previous | Blame | View Log