Subversion Repositories fpga-median

/* --------------------------------------------------------------------------------
 This file is part of FPGA Median Filter.
 
    FPGA Median Filter is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
 
    FPGA Median Filter is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
 
    You should have received a copy of the GNU General Public License
    along with FPGA Median Filter.  If not, see <http://www.gnu.org/licenses/>.
-------------------------------------------------------------------------------- */
/* +----------------------------------------------------------------------------
   Universidade Federal da Bahia
  ------------------------------------------------------------------------------
   PROJECT: FPGA Median Filter
  ------------------------------------------------------------------------------
   FILE NAME            : node.v
   AUTHOR               : João Carlos Bittencourt
   AUTHOR'S E-MAIL      : joaocarlos@ieee.org
   -----------------------------------------------------------------------------
   RELEASE HISTORY
   VERSION  DATE        AUTHOR        DESCRIPTION
   1.0      2013-08-13  joao.nunes    initial version
   -----------------------------------------------------------------------------
   KEYWORDS: comparator, low, hight, median
   -----------------------------------------------------------------------------
   PURPOSE: Compare two input values and return the low and high values.
   ----------------------------------------------------------------------------- */
module node
#(
    parameter DATA_WIDTH = 8,
    parameter LOW_MUX = 1, // disable low output
    parameter HI_MUX = 1 // disable hight output
)(
    input [DATA_WIDTH-1:0] data_a,
    input [DATA_WIDTH-1:0] data_b,
 
    output reg [DATA_WIDTH-1:0] data_hi,
    output reg [DATA_WIDTH-1:0] data_lo
);
 
 
    reg sel0;
 
    always @(*)
    begin : comparator
        if(data_a < data_b) begin
            sel0 = 1'b0; // data_a : lo / data_b : hi
        end else begin
            sel0 = 1'b1; // data_b : lo / data_a : hi
        end
    end
 
 
    always @(*)
    begin : mux_lo_hi
        case (sel0)
            1'b0 :
            begin
                if(LOW_MUX == 1)
                    data_lo = data_a;
                if(HI_MUX == 1)
                    data_hi = data_b;
            end
            1'b1 :
            begin
                if(LOW_MUX == 1)
                    data_lo = data_b;
                if(HI_MUX == 1)
                    data_hi = data_a;
            end
            default :
            begin
                data_lo = {DATA_WIDTH{1'b0}};
                data_hi = {DATA_WIDTH{1'b0}};
            end
        endcase
    end
 
endmodule