URL
https://opencores.org/ocsvn/fpu100/fpu100/trunk
Subversion Repositories fpu100
[/] [fpu100/] [tags/] [arelease/] [test_bench/] [SoftFloat/] [softfloat/] [timesoftfloat.txt] - Rev 21
Compare with Previous | Blame | View Log
Documentation for the `timesoftfloat' Program of SoftFloat Release 2b
John R. Hauser
2002 May 27
----------------------------------------------------------------------------
Introduction
The `timesoftfloat' program evaluates the speed of SoftFloat's floating-
point routines. Each routine can be evaluated for every relevant rounding
mode, tininess mode, and/or rounding precision.
----------------------------------------------------------------------------
Contents
Introduction
Contents
Legal Notice
Executing `timesoftfloat'
Options
-help
-precision32, -precision64, -precision80
-nearesteven, -tozero, -down, -up
-tininessbefore, -tininessafter
Function Sets
----------------------------------------------------------------------------
Legal Notice
The `timesoftfloat' program was written by John R. Hauser.
THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO
PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL
LOSSES, COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO
FURTHERMORE EFFECTIVELY INDEMNIFY THE AUTHOR, JOHN HAUSER, (possibly via
similar legal warning) AGAINST ALL LOSSES, COSTS, OR OTHER PROBLEMS INCURRED
BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE.
----------------------------------------------------------------------------
Executing `timesoftfloat'
The `timesoftfloat' program is intended to be invoked from a command line
interpreter as follows:
timesoftfloat [<option>...] <function>
Here square brackets ([]) indicate optional items, while angled brackets
(<>) denote parameters to be filled in. The `<function>' argument is
the name of the SoftFloat routine to evaluate, such as `float32_add' or
`float64_to_int32'. The allowed options are detailed in the next section,
_Options_. If `timesoftfloat' is executed without any arguments, a summary
of usage is written. It is also possible to evaluate all machine functions
in a single invocation as explained in the section _Function Sets_ later in
this document.
Ordinarily, a function's speed will be evaulated separately for each of
the four rounding modes, one after the other. If the rounding mode is not
supposed to have any effect on the results of a function--for instance,
some operations do not require rounding--only the nearest/even rounding mode
is timed. In the same way, if a function is affected by the way in which
underflow tininess is detected, `timesoftfloat' times the function both with
tininess detected before rounding and after rounding. For extended double-
precision operations affected by rounding precision control, `timesoftfloat'
also times the function for all three rounding precision modes, one after
the other. Evaluation of a function can be limited to a single rounding
mode, a single tininess mode, and/or a single rounding precision with
appropriate options (see _Options_).
For each function and mode evaluated, `timesoftfloat' reports the speed of
the function in kops/s, or ``thousands of operations per second''. This
unit of measure differs from the traditional MFLOPS (``millions of floating-
point operations per second'') only in being a factor of 1000 smaller.
(1000 kops/s is exactly 1 MFLOPS.) Speeds are reported in thousands
instead of millions because software floating-point may execute at less than
1 MFLOPS.
The speeds reported by `timesoftfloat' may be affected somewhat by other
programs executing at the same time as `timesoftfloat'.
Note that the remainder operations (`float32_rem', `float64_rem',
`floatx80_rem' and `float128_rem') will be markedly slower than other
operations, particularly for extended double precision (`floatx80') and
quadruple precision (`float128'). This is inherent to the remainder
function itself and is not a failing of the SoftFloat implementation.
----------------------------------------------------------------------------
Options
The `timesoftfloat' program accepts several command options. If mutually
contradictory options are given, the last one has priority.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-help
The `-help' option causes a summary of program usage to be written, after
which the program exits.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-precision32, -precision64, -precision80
For extended double-precision functions affected by rounding precision
control, the `-precision32' option restricts evaluation to only the cases
in which rounding precision is equivalent to single precision. The other
rounding precision options are not timed. Likewise, the `-precision64'
and `-precision80' options fix the rounding precision equivalent to double
precision or extended double precision, respectively. These options are
ignored for functions not affected by rounding precision control.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-nearesteven, -tozero, -down, -up
The `-nearesteven' option restricts evaluation to only the cases in which
the rounding mode is nearest/even. The other rounding mode options are
not timed. Likewise, `-tozero' forces rounding toward zero; `-down' forces
rounding down; and `-up' forces rounding up. These options are ignored for
functions that are exact and thus do not round.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-tininessbefore, -tininessafter
The `-tininessbefore' option restricts evaluation to only the cases
detecting underflow tininess before rounding. Tininess after rounding
is not timed. Likewise, `-tininessafter' forces underflow tininess to be
detected after rounding only. These options are ignored for functions not
affected by the way in which underflow tininess is detected.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
----------------------------------------------------------------------------
Function Sets
Just as `timesoftfloat' can test an operation for all four rounding modes in
sequence, multiple operations can also be tested with a single invocation.
Three sets are recognized: `-all1', `-all2', and `-all'. The set `-all1'
comprises all one-operand functions; `-all2' is all two-operand functions;
and `-all' is all functions. A function set can be used in place of a
function name in the command line, as in
timesoftfloat [<option>...] -all