URL
https://opencores.org/ocsvn/fpu100/fpu100/trunk
Subversion Repositories fpu100
[/] [fpu100/] [tags/] [arelease/] [test_bench/] [tb_fpu.vhd] - Rev 27
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------- -- -- Project: <Floating Point Unit Core> -- -- Description: test bench for the FPU core ------------------------------------------------------------------------------- -- -- 100101011010011100100 -- 110000111011100100000 -- 100000111011000101101 -- 100010111100101111001 -- 110000111011101101001 -- 010000001011101001010 -- 110100111001001100001 -- 110111010000001100111 -- 110110111110001011101 -- 101110110010111101000 -- 100000010111000000000 -- -- Author: Jidan Al-eryani -- E-mail: jidan@gmx.net -- -- Copyright (C) 2006 -- -- This source file may be used and distributed without -- restriction provided that this copyright statement is not -- removed from the file and that any derivative work contains -- the original copyright notice and the associated disclaimer. -- -- THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY -- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED -- TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -- FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR -- OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE -- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT -- OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -- POSSIBILITY OF SUCH DAMAGE. -- library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_unsigned.all; use ieee.math_real.all; use ieee.std_logic_arith.all; use ieee.std_logic_misc.all; use std.textio.all; use work.txt_util.all; -- fpu operations (fpu_op_i): -- ======================== -- 000 = add, -- 001 = substract, -- 010 = multiply, -- 011 = divide, -- 100 = square root -- 101 = unused -- 110 = unused -- 111 = unused -- Rounding Mode: -- ============== -- 00 = round to nearest even(default), -- 01 = round to zero, -- 10 = round up, -- 11 = round down entity tb_fpu is end tb_fpu; architecture rtl of tb_fpu is component fpu port ( clk_i : in std_logic; opa_i : in std_logic_vector(31 downto 0); opb_i : in std_logic_vector(31 downto 0); fpu_op_i : in std_logic_vector(2 downto 0); rmode_i : in std_logic_vector(1 downto 0); output_o : out std_logic_vector(31 downto 0); ine_o : out std_logic; overflow_o : out std_logic; underflow_o : out std_logic; div_zero_o : out std_logic; inf_o : out std_logic; zero_o : out std_logic; qnan_o : out std_logic; snan_o : out std_logic; start_i : in std_logic; ready_o : out std_logic ); end component; signal clk_i : std_logic:= '0'; signal opa_i, opb_i : std_logic_vector(31 downto 0); signal fpu_op_i : std_logic_vector(2 downto 0); signal rmode_i : std_logic_vector(1 downto 0); signal output_o : std_logic_vector(31 downto 0); signal start_i, ready_o : std_logic ; signal ine_o, overflow_o, underflow_o, div_zero_o, inf_o, zero_o, qnan_o, snan_o: std_logic; signal slv_out : std_logic_vector(31 downto 0); constant CLK_PERIOD :time := 10 ns; -- period of clk period begin -- instantiate fpu i_fpu: fpu port map ( clk_i => clk_i, opa_i => opa_i, opb_i => opb_i, fpu_op_i => fpu_op_i, rmode_i => rmode_i, output_o => output_o, ine_o => ine_o, overflow_o => overflow_o, underflow_o => underflow_o, div_zero_o => div_zero_o, inf_o => inf_o, zero_o => zero_o, qnan_o => qnan_o, snan_o => snan_o, start_i => start_i, ready_o => ready_o); --------------------------------------------------------------------------- -- toggle clock --------------------------------------------------------------------------- clk_i <= not(clk_i) after 5 ns; verify : process --The operands and results are in Hex format. The test vectors must be placed in a strict order for the verfication to work. file testcases_file: TEXT open read_mode is "testcases.txt"; --Name of the file containing the test cases. variable file_line: line; variable str_in: string(8 downto 1); variable str_fpu_op: string(3 downto 1); variable str_rmode: string(2 downto 1); begin --------------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------SoftFloat test vectors (10000 test cases for each operation) -------------------------------------------------------------------- while not endfile(testcases_file) loop wait for CLK_PERIOD; start_i <= '1'; str_read(testcases_file,str_in); opa_i <= strhex_to_slv(str_in); str_read(testcases_file,str_in); opb_i <= strhex_to_slv(str_in); str_read(testcases_file,str_fpu_op); fpu_op_i <= to_std_logic_vector(str_fpu_op); str_read(testcases_file,str_rmode); rmode_i <= to_std_logic_vector(str_rmode); str_read(testcases_file,str_in); slv_out <= strhex_to_slv(str_in); wait for CLK_PERIOD; start_i <= '0'; wait until ready_o='1'; assert output_o = slv_out report "Error!!!" severity failure; str_read(testcases_file,str_in); end loop; ---------------------------------------------------------------------------------------------------------------------------------------------------- assert false report "Success!!!.......Yahoooooooooooooo" severity failure; wait; end process verify; end rtl;
Go to most recent revision | Compare with Previous | Blame | View Log